Part request - Atrix 4G General

Turns out this Atrix I have is having some wacky issues...
No sound from rear speaker, no sound from headphone jack[already tried the contact fix], and the wifi is not working at all. Just wondering if anyone out there has a spare logic board laying around that's known to be fully working?? willing to pay a REASONABLE price but just saying I'm totally cool with donations too!

VirtueToVice said:
Turns out this Atrix I have is having some wacky issues...
No sound from rear speaker, no sound from headphone jack[already tried the contact fix], and the wifi is not working at all. Just wondering if anyone out there has a spare logic board laying around that's known to be fully working?? willing to pay a REASONABLE price but just saying I'm totally cool with donations too!
Click to expand...
Click to collapse
We recently bought two pieces of motherboard for $19.90 each + shipping on ebay. It's rare but sometimes it shows.

Yeah, this phone is known for spontaneously falling apart. Shame, because it's a good device.
Sent from my SGH-I747 using xda premium

IUH1991 said:
Yeah, this phone is known for spontaneously falling apart. Shame, because it's a good device.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Huh?
Sent from my olympus using xda premium

VirtueToVice said:
Turns out this Atrix I have is having some wacky issues...
No sound from rear speaker, no sound from headphone jack[already tried the contact fix], and the wifi is not working at all. Just wondering if anyone out there has a spare logic board laying around that's known to be fully working?? willing to pay a REASONABLE price but just saying I'm totally cool with donations too!
Click to expand...
Click to collapse
send the logic board my way I have repaired several of those issues on atrixs before. except the wifi, never come across that problem for that particular model. did the phone get liquid damaged?

AndroidClone said:
send the logic board my way I have repaired several of those issues on atrixs before. except the wifi, never come across that problem for that particular model. did the phone get liquid damaged?
Click to expand...
Click to collapse
Would you happen to be reworking the BGA's on those boards?

Related

PERMANENTLY fix your "blown" speaker

First off this could break your speaker, do this at your own risk.
I have tested this on 2 EVO's with completely "blown" speakers, they both now sound absolutely perfect. From what i can tell, it's a lot of built up metal shavings, they weigh the speaker cone down and prevent it from making the true desired frequency.
You will need a earth magnet, or a really strong regular one will do i guess,(I used a earth mag tho)
First issue: you have to take the phone apart, from there, remove speaker,
(has been covered on youtube so go a lookin)
Now.. take the speaker, sweet diagram huh?(its late) and drop it, foam side down, from about 3 or 4 inches onto the magnet. Repeat. You will see the shavings coming off the speaker and sticking to the earth magnet.
Do it for a few minutes or until the metal shavings are all gone.
Re-assemble, click your favorite player and enjoy!!
I will try to get a tutorial on youtube soon..
u might wanna add a disclaimer as some waterhead is gonna do this and toast their evo!
Sent from my PC36100 using XDA Premium App
HTCRALEIGHFAN said:
u might wanna add a disclaimer as some waterhead is gonna do this and toast their evo!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
HA ha
Sent from my PC36100 using XDA App
HTCRALEIGHFAN said:
u might wanna add a disclaimer as some waterhead is gonna do this and toast their evo!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Done..Thanks and sorry.
Why not since you have it apart and risk damaging the speaker by screwing up the polarity of the speakers magnet just drop in a brand new speaker. They can be picked up for a few bucks.
drtdiver83 said:
Why not since you have it apart and risk damaging the speaker by screwing up the polarity of the speakers magnet just drop in a brand new speaker. They can be picked up for a few bucks.
Click to expand...
Click to collapse
Im on my third speaker in a year,and who want's to wait two weeks for the speaker to get from china? Did another friend's this am, zero problems. I can see where you would think this may cause a problem, but it doesn't, Sound is restored to perfect.
Just trying to pass on what has worked 3 times for me. I would prefer fixing rather than replacing, i assume others would too.
I see this all the time at my store, especially those who work outside and around machinery.
Had one guy blow 3 in two weeks before we finally sat him down and explained in detail exactly why it was doing it before he finally wised up.
just take it to sprint they will replace it for free and do it right there
Assuming you have not disassembled it and broke the seal, and you have a warranty, and you live near a store that does service work. But besides that, yeah spot on.
Sent from my PC36100 using XDA App
dabigcheezze said:
Assuming you have not disassembled it and broke the seal, and you have a warranty, and you live near a store that does service work. But besides that, yeah spot on.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I work on Evos with broken screw seals. For the average customer, it means they've had it worked on before and the sticker wasn't replaced.
Thanks so much. after having the evo over a year and putting it on my work bench. I never thought about the metal shavings from screws getting in. Works as new
i'll give this a try soon.
This is a cool post but I really do see in the near future some idiots ruining their phones trying to open it up and pulling the speaker out
Cyanogenized EVO4g nightly 102
Sunsparc said:
I work on Evos with broken screw seals. For the average customer, it means they've had it worked on before and the sticker wasn't replaced.
Click to expand...
Click to collapse
Yeah the clowns at the one service shop where I live tell you to beat it if the seal is broken.
Sent from my PC36100 using XDA App
Hope not. But I don't doubt it.
Sent from my PC36100 using XDA App
Does this work for the earpiece speaker? My earpiece speaker just started buzzing and I can't understand what anyone with a deeper voice is saying at all.
yougivemerash!!! said:
Does this work for the earpiece speaker? My earpiece speaker just started buzzing and I can't understand what anyone with a deeper voice is saying at all.
Click to expand...
Click to collapse
I don't see why it wouldn't, obviously the idea is that the earth magnet is WAY stronger than the speakers magnet allowing it to pull away the shavings, give it a shot and report back!
drtdiver83 said:
Why not since you have it apart and risk damaging the speaker by screwing up the polarity of the speakers magnet just drop in a brand new speaker. They can be picked up for a few bucks.
Click to expand...
Click to collapse
Just wanted to point out that unless the speaker is part of a matched pair, reversing the polarity of the magnet will not affect the sound...
zilesx said:
Just wanted to point out that unless the speaker is part of a matched pair, reversing the polarity of the magnet will not affect the sound...
Click to expand...
Click to collapse
Well it will change the entire dynamics of the intended design... therefore changing frequency, depth, and volume. Speakers are designed to push... not pull. If they pull, it will more or less push the sound into whatever it's housing is.
LancerEVA06 said:
Well it will change the entire dynamics of the intended design... therefore changing frequency, depth, and volume. Speakers are designed to push... not pull. If they pull, it will more or less push the sound into whatever it's housing is.
Click to expand...
Click to collapse
NOPE!!!!!!!!!!!

So, my vibrnt only send audio to my headphones from 1 channel :(

Hi, suddenly the 3.5mm jack on my vibrant stopped working for 1 side. I know there is a replacable part but, I dont know if its just the jack or the motherboard itself...
Does anyone have repaired his vibrant replacing the jack? the jack and antena flex is not expensive but i want to be sure if that the root of the problem...
If there is problem with motherboard most likely it would be software related as long as there is no water damage.
Sent from my T959 using XDA App
gun said:
If there is problem with motherboard most likely it would be software related as long as there is no water damage.
Sent from my T959 using XDA App
Click to expand...
Click to collapse
Gonna reinstall stock rom and see if it was the rom, or something different
Uhh this happened to me too
Sent from my DROID BIONIC using XDA App
Hate to be that guy, but did you try those headphones elsewhere? Try another set as well?
Sent from my SGH-T959 using XDA App
da_dragon2k3 said:
Hate to be that guy, but did you try those headphones elsewhere? Try another set as well?
Click to expand...
Click to collapse
Yeah, it was the first thing I tried, the headphones work on other things, and others headphones dont work on the phone...
Already reversed to stock rom and its the same
Well I guess better start ordering that flex... if that doesnt work either... time to change phone I guess...
sotodefonk said:
Hi, suddenly the 3.5mm jack on my vibrant stopped working for 1 side. I know there is a replacable part but, I dont know if its just the jack or the motherboard itself...
Does anyone have repaired his vibrant replacing the jack? the jack and antena flex is not expensive but i want to be sure if that the root of the problem...
Click to expand...
Click to collapse
Just a suggestion, but you could check and see if there is anything stuck to the contacts within the jack on the phone. Something could be keeping it from making contact.
Gizmoe said:
Just a suggestion, but you could check and see if there is anything stuck to the contacts within the jack on the phone. Something could be keeping it from making contact.
Click to expand...
Click to collapse
I did, but nope, its clean there and also have a otterbox case which covers the hole when not in use, so It couldn't get dirty like that... Tried cleaning the pins with a qtip and isopropyl alcohol but not a single change... not even a noise when rotating the plug or something that make me think its dirty...
I hope that the flex is the problem and not something on the motherboard
The part that you need is only US $8.58 on eBay Item number: 250896342047
I doubt its tthe motherboard (tho it could be)... good lluck
Sent from a cell tower to the XDA server to you.
Thanks, I already ordered so, just gonna wait to get it and let you guys know if it fixed it or not
Kinda hard to rely in Bluetooth audio now... audio quality sucks :/
UPDATE:
I received the replacement jack about a week ago, but just had time to replace it.
It does the same It's the ****in' motherboard >_<
Well, it worth the try for 9 dollars, but just feel disappointed it doesn't work
I though maybe you guys wanted to know and thanks for the help though
That is lame. Hopefully you can still warranty it.

NNNOOOOOOOOOOOOOOOOOOOOOOOO

It finally happened I have a big dead area on my Atrix. I can no longer type the letters T, G or V. It's weird, in Multi Touch Tester when I put my finger there, it shows points on both sides of the column. It has rendered my Atrix nearly useless. I tried formatting everything and reloading a ROM in CWM and it is still busted. I guess this is the end. Sadly, I can't get a new phone for a few more days.
I'm really disappointed by this. I don't even know what new phone I would get....
Is it even worth replacing the digitizer? It was woring fine this morning, this happened after dinner. A sad, sad day indeed
Sir_Brizz said:
It finally happened I have a big dead area on my Atrix. I can no longer type the letters T, G or V. It's weird, in Multi Touch Tester when I put my finger there, it shows points on both sides of the column. It has rendered my Atrix nearly useless. I tried formatting everything and reloading a ROM in CWM and it is still busted. I guess this is the end. Sadly, I can't get a new phone for a few more days.
I'm really disappointed by this. I don't even know what new phone I would get....
Is it even worth replacing the digitizer? It was woring fine this morning, this happened after dinner. A sad, sad day indeed
Click to expand...
Click to collapse
There is a fix but it's risky, try to find it here.
I think he's talking about the PDS partition fix, might make it easier to find now.
KH_Lionheart said:
I think he's talking about the PDS partition fix, might make it easier to find now.
Click to expand...
Click to collapse
Maybe he can give it a try but it's not the problem, I know because it also happened to me once.
Moved to q&a
Sent from my MB860 using xda premium
Yeah, tried PDS fix. Also tried fruit cake back to stock and PDS fix again, same problem.
Unfortunately I can't even use the phone in this state. Too much of the screen is hosed. I guess it's back to the 3GS (DOH!!!) and getting a new phone next week.
Not. Happy.
Am still using my fix for months now and screen works great.
Sent from my MB860 using xda premium
Just buy a new digitiser from eBay. Worked for me.
Sent from my MB860 using xda app-developers app
i have the same problem (again)
fist time i hat a part of the upper screen not working now its also the letters t,g,v that seem to be dead areas.
my guesses are that i had my device running under too much heat, as i stresstested it for some periode of time with 80+°C and the letters are near the area of the cpu which was causeing much heat. well now it's just some 30-40 bucks for a new digitizer and 15mins of work for replacement.
little tip: install a cm7-rom and enable 180° rotation so you can use ur phone even in portrait mode. if you have probs with lower screen area just rotate your device
If you get a new digitizer with the frame its pretty easy to fix yourself, not particularly expensive and you should be able to return it easily if it's faulty. Check ebay.
Sent from my Atrix
just replace broken screen, or send to service
tomh235 said:
If you get a new digitizer with the frame its pretty easy to fix yourself, not particularly expensive and you should be able to return it easily if it's faulty. Check ebay.
Sent from my Atrix
Click to expand...
Click to collapse
This!
I tried with an "OEM" digitizer off eBay and it was faulty. Got an original used one off eBay with bezel attached in good Nick and it was much easier to fit and works like a charm.
One word of warning, remove the LCD before pushing the digitizer cable through the phone.
Same happened with me and that was after the repair shop tried three replacements lol.
I haven't heard of any problems with the ones with the bezels though!
Sent from my Atrix
Yea I have three unresponsive bands on my atrix screen and no upgrade options until the winter lol. Also, my headphone jack doesn't work!
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Does anyone know what causes this problem. Is it heating issues from overclocking?
Starting to get worried after reading about so many fellow atrix users with the dodgy digitizer issue.
I've had mine for one year with another year left until an upgrade so hoping mine doesn't go the same way.
Sent from my MB860 using xda app-developers app
debt collector said:
Does anyone know what causes this problem. Is it heating issues from overclocking?
Starting to get worried after reading about so many fellow atrix users with the dodgy digitizer issue.
I've had mine for one year with another year left until an upgrade so hoping mine doesn't go the same way.
Click to expand...
Click to collapse
I wish I knew this as well. It must be some sort of separation between the digitizer and the screen because wedging something between the battery and fingerprint reader can improve the touch sensor.
debt collector said:
Does anyone know what causes this problem. Is it heating issues from overclocking?
Starting to get worried after reading about so many fellow atrix users with the dodgy digitizer issue.
I've had mine for one year with another year left until an upgrade so hoping mine doesn't go the same way.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I think its overheating in general. I've never over locked this phone and even simple browsing through xda heats the CPU up to 55-60 degrees.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
debt collector said:
Does anyone know what causes this problem. Is it heating issues from overclocking?
Starting to get worried after reading about so many fellow atrix users with the dodgy digitizer issue.
I've had mine for one year with another year left until an upgrade so hoping mine doesn't go the same way.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Mine is a little over 9 months old (got it with contract last November I think) and as I speak, my digitizer is dying as well Not only that, mine has serious bootloop problems and also Sleep of Death very often. Oh well, one more year to go
Sent from my undervolted, underclocked, power saving Motorola Atrix.
Please move to Q & A
maggedo said:
Please move to Q & A
Click to expand...
Click to collapse
Do you ever post anything useful?

[Q] is my new screem bad?

i just received the screen i bought to replace on my Verizon G2 (VS980) and just installed it, when i went to turn it on this is what the screen displayed, good thing i did not glue it down, but i tried connecting the cables again but still get the same thing. have you ever seen this?
sorry about the pic quality i had to use my laptops webcam.
That might just be a bad screen are you sure the cables are all correctly plugged in
Sent from my LG-D800 using xda app-developers app
XxZombiePikachu said:
That might just be a bad screen are you sure the cables are all correctly plugged in
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
well i i know the digitizer worked. so im going to try putting my old cracked screen on. this is getting annoying...
Going to sound really weird. When you reassembled the phone your white antenna cable near the bottom of the phone crosses over a connection right before it plugs in. Is that connection covered with a non conductive material or no? Reason I ask is that I have recently performed this repair myself and ran into an issue similar to this. Believe it or not but shielding that connection from the antenna cable with a piece of electrical tape fixed the crazy acting screen I had.
Here's a link to the thread I had with a video how to I found.
http://forum.xda-developers.com/showthread.php?t=2660266
Sent from my LG-VS980 using xda app-developers app
howesfd said:
Going to sound really weird. When you reassembled the phone your white antenna cable near the bottom of the phone crosses over a connection right before it plugs in. Is that connection covered with a non conductive material or no? Reason I ask is that I have recently performed this repair myself and ran into an issue similar to this. Believe it or not but shielding that connection from the antenna cable with a piece of electrical tape fixed the crazy acting screen I had.
Here's a link to the thread I had with a video how to I found.
http://forum.xda-developers.com/showthread.php?t=2660266
Sent from my LG-VS980 using xda app-developers app
Click to expand...
Click to collapse
i actually watched that to do this repair and found out about this when i put my cracked screen back about that. so i tried putting the other one back in and nothing. so i already contacted the seller and will be getting a refund, and this time will just make sure i buy a screen with a Verizon logo on it, then i should work, also for some reason now my speaker is not working.
clapper66 said:
i actually watched that to do this repair and found out about this when i put my cracked screen back about that. so i tried putting the other one back in and nothing. so i already contacted the seller and will be getting a refund, and this time will just make sure i buy a screen with a Verizon logo on it, then i should work, also for some reason now my speaker is not working.
Click to expand...
Click to collapse
Here is the link to the one I bought. Select accesories4 as a seller.
http://www.amazon.com/gp/aw/d/B00HNBALO4/ref=mp_s_a_1_1?qid=1394127735&sr=8-1
howesfd said:
Here is the link to the one I bought. Select accesories4 as a seller.
http://www.amazon.com/gp/aw/d/B00HNBALO4/ref=mp_s_a_1_1?qid=1394127735&sr=8-1
Click to expand...
Click to collapse
ok thanks, when i ordered the one i organically bought i took a chance. The annoying this is i could find any information online about the screen being universal with all models and i took a chance with the one i bought that said compatible with all models.
clapper66 said:
ok thanks, when i ordered the one i organically bought i took a chance. The annoying this is i could find any information online about the screen being universal with all models and i took a chance with the one i bought that said compatible with all models.
Click to expand...
Click to collapse
Ya I tried to cheap out and initially bought a screen without an LCD.

[Q] Galaxy Note 3 'Vibrates' When Tapped?

Hey fellow enthusiasts, I just realised that whenever I tapped on my phone, for example when I tap on the back of my phone, it kinda vibrates. anyone facing this issue?
justinfabregasss said:
Hey fellow enthusiasts, I just realised that whenever I tapped on my phone, for example when I tap on the back of my phone, it kinda vibrates. anyone facing this issue?
Click to expand...
Click to collapse
There is a haptic feed back when you press softkeys. you might be pushing them.
Sent from Galaxy Note 3 SM-N9005
When you mean vibration. Do you mean in your pocket? If you get the vibration/boom feeling then that the vibrating motor. Hope this helps.
Sent from my GT-S5830 using Tapatalk 2
hey guys, its not the haptic feedback. its like it somehow 'vibrates' when I tapped it on the back of my phone.
It hasn't occured to you that it might be something to do with this at all?
B3311 said:
It hasn't occured to you that it might be something to do with this at all?
Click to expand...
Click to collapse
it happened before this.
justinfabregasss said:
it happened before this.
Click to expand...
Click to collapse
Would have been helpful to say so..
For the record, and to stay on topic, no, mine doesn't.
B3311 said:
Would have been helpful to say so..
For the record, and to stay on topic, no, mine doesn't.
Click to expand...
Click to collapse
it doesn't really vibrate but it kinda feels like its moving when tapped with your nails.
Yeah I have the same feeling, like its on "haptic Vibro" but thats not enabled, yet still feels like a slighter Vibrate when hitting some keys?
I think I know what he means...
Its not a feedback from the vibrator at all -- I sometimes tap on my Note when I'm listening to music, like I'm playing a drum solo with my fingers
There is a faint vibration when I do that.
I always assumed it was just one of the sensors vibrating in response to my enthusiastic taps. Who knows, the shock sensor, the vibrator itself?
Anyway, I don't think its anything wrong or broken.
I don't think there is a problem... it happened with my note 2, but always worked well and flawlessly
I get it occasionally and gave up with it.
Sent from my SM-P600 using Tapatalk
See, I told you, your main board is coming apart.
Sent from my N9005
It shows missed call alert
Sent from my SM-N900 using xda app-developers app
I saw a thread on here that might help. It basically said that the camera module "vibrates" slightly when tapped. It's normal, apparently.
Sent from my SM-N9005 using xda app-developers app
The back of phone not the back button right I had this before but it was only happen for few days when I touch the phone it will vibrate so weird but I restore to factor and all problem gone
Sent from my SM-N900A using Tapatalk
I get this when I pick up my phone.but I think it's reminder for unread texted messages.
At least four me that's the only time it buzzed.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Hi!
A lady friend of mine has this problem on a GSIII.
She broke her screen and since i had a GSIII with dead mainboard i moved her mainboard to the other phone. Main camera & all.
The phone now works perfectly but has accuired the "vibrate when tapping" issue.
Personally i´d say that the vibrating camera module is a solid bet. Production tolerances might be a little on the loose side in the new camera/screenframe combo and there is a short unsupported flex cable from main board to camera module.
If i understand this particular issue correctly you dropped your phone a while back. This just might have knocked the camera module a bit around so it now sits a smidgeon more loosely in the camera bay.
If it really bothers you, a solution could be to disassemble your phone and try thightening the tolerances in the camera mount by adding small pieces of e.g. sticky tape on sides or bottom. If nothing else you´d be able to confirm or discard the camera module as the "culprit".
Personally though i wouldn´t worry about it, as long as everything hums along nicely with this particular handset.
Regards
Elo
Polar67 said:
Hi!
A lady friend of mine has this problem on a GSIII.
She broke her screen and since i had a GSIII with dead mainboard i moved her mainboard to the other phone. Main camera & all.
The phone now works perfectly but has accuired the "vibrate when tapping" issue.
Personally i´d say that the vibrating camera module is a solid bet. Production tolerances might be a little on the loose side in the new camera/screenframe combo and there is a short unsupported flex cable from main board to camera module.
If i understand this particular issue correctly you dropped your phone a while back. This just might have knocked the camera module a bit around so it now sits a smidgeon more loosely in the camera bay.
If it really bothers you, a solution could be to disassemble your phone and try thightening the tolerances in the camera mount by adding small pieces of e.g. sticky tape on sides or bottom. If nothing else you´d be able to confirm or discard the camera module as the "culprit".
Personally though i wouldn´t worry about it, as long as everything hums along nicely with this particular handset.
Regards
Elo
Click to expand...
Click to collapse
hello! thanks for your long reply, this happened before I dropped my device, so I reckon it isn't because of the drop! it works flawlessly, but do you think I should take it over to Samsung? or is it not an issue?
justinfabregasss said:
hello! thanks for your long reply, this happened before I dropped my device, so I reckon it isn't because of the drop! it works flawlessly, but do you think I should take it over to Samsung? or is it not an issue?
Click to expand...
Click to collapse
About the drop - oh yeah, you stated that earlier, my bad.
I´d leave it alone.
If the phone is still under warranty you could try taking it to a service center but then you´ll have to demonstrate there is an issue.
As everything works as it should that might be easier said than done.
Regards
Elo

Categories

Resources