Hello! I tried to install this rom to my phone. First I rooted the phone and then I installed CWM 5.5.0.4. First I did a nandroid backup then I proceeded to wipe the data, cahche and dalvik cache. Then I installed the zip. When I tried to boot up the phone went to bootloop. I tried to restore the nandroid backup, CMW claimed that all went well but it didn't fix the bootloop.
After that I tried once more install the custom rom, needless to say that it wasn't success.. So after that I replaced the (cmw)recovery.img with the original recovery.img in the pink screen mode and tried to boot up my phone once again. Once again there were bootloop. Then I decided to put the cmw recovery back in. Now I can't even access to the cmw recovery and I all out of ideas.
The easiest way is install a offical ROM. And Cyanogenmod 7 by ezet can't instalable to 404020 baseband
Related
I was running CM6.1.1, did a backup using Clockworkmod recovery 2.5.x.x. Updated CW recovery to 3.0.0.5, then flashed GingerVillain 1.5. Decided it wasn't for me, so I wiped and then restored my CM6.1.1 image. Restore completes okay, reboot and now I'm stuck at the HTC screen. Also tried wiping and restarting, still stuck.
Is CWM 3.0 not capable of restoring Froyo roms? Do I need to reflash 2.5.x.x, then restore my CM6.1.1?
Thanks in advance!
Sorry for being so quick to make a thread. Reflash of Clockworkmod 2.5.1.3 allowed me to restore and boot my backup. Problem solved.
While starting to upgrade from CM10 to CM10.2/10.3 on MB526, I flashed TWRP zip file downloaded from Team-win website.
steps:
1) downloaded recovery and copied to SDcard.
2) reboot into custom recovery (CWM)
3) Flash zip of TWRP recovery
Since than, I am getting black screen after clicking on custom recovery from Bootmenu.
Device is working fine,
but with no custom recovery, my hands are tied...
can't restore backup, can't flash rom or do anything..
tried installing zip from stock recovery.. Installation aborted appears
Is there any solution to get recovery working without starting from scratch (flashing SPF and 2ndinit, and so on.... )
warewolf4586 said:
While starting to upgrade from CM10 to CM10.2/10.3 on MB526, I flashed TWRP zip file downloaded from Team-win website.
steps:
1) downloaded recovery and copied to SDcard.
2) reboot into custom recovery (CWM)
3) Flash zip of TWRP recovery
Since than, I am getting black screen after clicking on custom recovery from Bootmenu.
Device is working fine,
but with no custom recovery, my hands are tied...
can't restore backup, can't flash rom or do anything..
tried installing zip from stock recovery.. Installation aborted appears
Is there any solution to get recovery working without starting from scratch (flashing SPF and 2ndinit, and so on.... )
Click to expand...
Click to collapse
I think stock recovery can't help you now, you should start from scratch...
It isn't so hard, just takes time...
From CM10 to CM10.2, you don't need to change recovery, just install it. From CM10.2 to CM11 you should install update-recovery.zip, reboot, install CM11 + GApps.
Hope it helps... :highfive:
warewolf4586 said:
While starting to upgrade from CM10 to CM10.2/10.3 on MB526, I flashed TWRP zip file downloaded from Team-win website.
steps:
1) downloaded recovery and copied to SDcard.
2) reboot into custom recovery (CWM)
3) Flash zip of TWRP recovery
Since than, I am getting black screen after clicking on custom recovery from Bootmenu.
Device is working fine,
but with no custom recovery, my hands are tied...
can't restore backup, can't flash rom or do anything..
tried installing zip from stock recovery.. Installation aborted appears
Is there any solution to get recovery working without starting from scratch (flashing SPF and 2ndinit, and so on.... )
Click to expand...
Click to collapse
Start from scrach >.>
Hi! I have a little problem. I had installed TeamWin Recovery few months ago. Yesterday I installed ROM Manager and app set Clockworkmod Recovery as default. Although i change in setup in app to TeamWin, after rebooting still i have Clockwork. How can I delete Clockwork ?
Thnks for helping
Whit ROM Manager I always had problems, I will backup the entire system with CMW to zip, then I will wipe the Phone, then installed MAGLRD and your Prefered Recovery and Restore the Zip.
Hello, I have InnJoo i2s with Android 4.4.2 and CWM based recovery and when I try to install stock recovery.img extracted from stock ROM zip and compressed in it's own zip it starts flashing and then it says installation aborted and now I have a bootloop and I can't flash stock ROM again
Can you help me? :crying:
Actually it's not a bootloop but as soon as the boot animation starts the screen blacks out. I think it was caused by trying to format data and factory reset the phone through recovery but it froze. Also, I'm not able to flash anything through the recovery and I can't restore a backup created with the CWM based recovery. Thanks again
Ghamid7 said:
Actually it's not a bootloop but as soon as the boot animation starts the screen blacks out. I think it was caused by trying to format data and factory reset the phone through recovery but it froze. Also, I'm not able to flash anything through the recovery and I can't restore a backup created with the CWM based recovery. Thanks again
Click to expand...
Click to collapse
Best way out is reflash the entire stock ROM as it is.
Format cache and delvik and reboot
Once the system boots up, reflash the CWM or TWRP and get back your backup to work
You may use flashify app from thegoogle play store
My phone came with version 66.77.... (MIUI 6) from the reseller.
I have installed TWRP, rooted the device using adb and then flashed 5.9.24. So far so good.
After some time i decided to try AOSP ROM. I made a backup in TWRP and then flashed AOSP using TWRP. No problems so far (cleared cache, dalvik etc)
Then I wanted to revert back to 5.9.24. I cleared cache dalvik etc, and then I cannot remember anymore if i have reflashed 5.9.24 or restored the backup made previously from TWRP, the thing I wasn't able to boot into recovery anymore. The phone was stuck on the teamwin logo if booted into recovery but normal boot was working fine.
Then i reflashed twrp using adb.
After doing that, my phone was still stuck on the teamwin logo when booting into recovery, but with normal booting i was getting infinite boot loops at Mi logo screen.
After several ours of tries, i was able to solve the normal booting problem by flashing the stock recovery (so the phone is now back on the 5.9.24 - and working fine) but when I try to flash twrp using adb the same symptoms as before:
- Recovery boot - stuck on teamwin logo screen
- Normal boot - boot loops
I already tried to flash via Updater app, Flashify and Windroid nothing worked.
Can anyone help me to get this custom recovery working, please?
Thanks
Regards,
Nick
lukke04 said:
My phone came with version 66.77.... (MIUI 6) from the reseller.
I have installed TWRP, rooted the device using adb and then flashed 5.9.24. So far so good.
After some time i decided to try AOSP ROM. I made a backup in TWRP and then flashed AOSP using TWRP. No problems so far (cleared cache, dalvik etc)
Then I wanted to revert back to 5.9.24. I cleared cache dalvik etc, and then I cannot remember anymore if i have reflashed 5.9.24 or restored the backup made previously from TWRP, the thing I wasn't able to boot into recovery anymore. The phone was stuck on the teamwin logo if booted into recovery but normal boot was working fine.
Then i reflashed twrp using adb.
After doing that, my phone was still stuck on the teamwin logo when booting into recovery, but with normal booting i was getting infinite boot loops at Mi logo screen.
After several ours of tries, i was able to solve the normal booting problem by flashing the stock recovery (so the phone is now back on the 5.9.24 - and working fine) but when I try to flash twrp using adb the same symptoms as before:
- Recovery boot - stuck on teamwin logo screen
- Normal boot - boot loops
I already tried to flash via Updater app, Flashify and Windroid nothing worked.
Can anyone help me to get this custom recovery working, please?
Thanks
Regards,
Nick
Click to expand...
Click to collapse
Tried this: http://en.miui.com/thread-152550-1-1.html?mobile=2
Sent from my 2014817 using Tapatalk
timberwolf60 said:
Tried this: http://en.miui.com/thread-152550-1-1.html?mobile=2
Sent from my 2014817 using Tapatalk
Click to expand...
Click to collapse
i saw the request of the message but i am not using a custom recovery on my phone,i use a custom dev rom made by miui france.
i think some china dev rom comes rooted by default with custom installer updater and gapps like mine.
i think twrp is not fully compatible with this device yet.
Have you try with sp flash tool method ?
http :// en.miui.com/forum.php?mod=viewthread&tid=156838&extra=page%3D4&mobile=2
I just installed TWRP for the first time ever. I used the Flashify App from the Play Store, installed it and gave it root permissions and just selected the TWRP image on the phones internal store. Seemed to work just fine and did not have to plug my phone into a computer