Database Users

ActivSync - Flashing problem

Hi guys! It's again me
I have problem with flashing my X1.
Downloaded R2AA Generic English ROM. Installed 3.5 .NET framework on my Vista 64bit(all updates, including .NET 3.5 SP1), everythings suppa - when phone is ON - active sync detects, sync works.
Problem appears in that 4 color mode, where I want to upgrade ROM.
4 colored stripes and text appears, but when i plug the USB cable in.... on X1 it shows "USB" text but active sync doesnt detect the device. I just can't sync my X1 with PC while in that "ROM 4-colored mode" - and in progression - cant update my ROM.
Pls help
I want to install R2AA original, generic UK ROM by that method:
1:enter boot mode on X1
2:connect cable to PC and activesync the device (WinMobDevCentre)
3:run RUU and instal ROM's .image file
Because of temporary leak of mem.card

Have you tried running the program when connected with USB in boot mode?
Program should detect your phone

Active Sync is passive process.
How can I manually sync it?
Im in boot mode - entering USB and - no sync - so no ROM update

1. Enter boot mode
2. Connect with USB (when first time windows has to install drivers, wait for completion)
3. Run RUU (the program should recognize your phone)

1:entered boot mode
2:connected USB - windows installed device named "Microsoft USB Sync"
3:RUU doesnt recongnize connected device (no activesync connection)- cannot be continued

Hmm, let's try something else
1. Leave phone on
2. Connect to pc and WinMobDevCen
3. Run RUU

RUU gives me message: The update ultility could not open requested file.

Abuk007 said:
RUU gives me message: The update ultility could not open requested file.
Click to expand...
Click to collapse
Rename the image file to ruu_signed.nbh and place it in the same folder as the RUU utility

It runs! Thanks a lot
I hope it won't damage phone
...................
It crashed damn!
stopped at 10%.... i haven't HARD-SPL, thought generic ROMS don't require it...
What now ?

Abuk007 said:
It runs! Thanks a lot
I hope it won't damage phone
Click to expand...
Click to collapse
If you wait for the RUU utility to say the flash has been succesfull it won't be damaged....
Just don't do anything with your phone/pc during flash
Glad to be helpful...

Look my upper post :/

Abuk007 said:
It runs! Thanks a lot
I hope it won't damage phone
...................
It crashed damn!
stopped at 10%.... i haven't HARD-SPL, thought generic ROMS don't require it...
What now ?
Click to expand...
Click to collapse
You're correct, generic roms have radio and spl included.
Did ruu gave an error code?
ps you do need hard-spl if you're phone was originally in another language!

It had error. But I don't remember number.
On phone it writes: upgrade ROM code error
I had Vodafone R1AA UK ROM
Just want Generic R2AA UK.
Trying to fix...
using x1 Hard SPL to install R2AA UK generic.... will post result

Im getting 262 error.. even in Hard SPL...
HELP!
............................................
FIXED!
Don't know how
tried to run Hard SPL RUU - no effect - error 262
then runned normal, Kovsky RUU with same ROM - it worked!

Abuk007 said:
Im getting 262 error.. even in Hard SPL...
HELP!
............................................
FIXED!
Don't know how
tried to run Hard SPL RUU - no effect - error 262
then runned normal, Kovsky RUU with same ROM - it worked!
Click to expand...
Click to collapse
Probably hard-spl is installed even after the error, so you're abl to flash other rom than vodafone UK.
You can check this by going into boot mode and check what it says in the upper color bar.

it writes:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
so what SPL is it? hard or soft?

Abuk007 said:
it writes:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
so what SPL is it? hard or soft?
Click to expand...
Click to collapse
soft
hard says SPL-0.72.OliNex

THX a lot Lokatho for your great help! If there were any kind of credits on forum - you would get min. 100

P3600 Can´t update rom

Hi there,
i´ve got an trinity and flashed it with a new rom.
It worked great and the rom was fine but than i found a better one.
When i tried to flash the rom, the update progress stoped at 8pc and mobile phone only has a black screen. I searched forums for long time and than i found
the way to enter bootloader.
If i connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash i got the Message
Error[270] Update Error
Ur Image file is corrupted, Pleas Chack Update utility.
I also tried the method unbrik and hardspl
but i cant flash to any rom.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.07.0000
HARD SPL DOESNT WORK? Progress bar @ 100% but than update error again?
Thank You

reply
yokuma said:
Hi there,
i´ve got an trinity and flashed it with a new rom.
It worked great and the rom was fine but than i found a better one.
When i tried to flash the rom, the update progress stoped at 8pc and mobile phone only has a black screen. I searched forums for long time and than i found
the way to enter bootloader.
If i connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash i got the Message
Error[270] Update Error
Ur Image file is corrupted, Pleas Chack Update utility.
I also tried the method unbrik and hardspl
but i cant flash to any rom.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.07.0000
HARD SPL DOESNT WORK? Progress bar @ 100% but than update error again?
Thank You
Click to expand...
Click to collapse
i think you have to download SSPL Then copy it to your ppc extract nbh file from the rom you want to flash rename it TRINIMG.nbh and copy both this file & SSPL to you the root of SD Card click on SSPL to enter bootloader tnen click on power to confirm installation from SD Card wait untill to see update completed take off sd from the phone & power it on hope this help you

Error Upgrading P3600

Hello,
I Flashed my P3600 starting from WM 5 with Trinity_Rom_NiAl_Build_23504.
It worked but not at all (pine nuts) so I decided to upgrade again.
The second one, the upgrade stopped while he was runnung and I did the recovery procedure as suggested by the upgrade.
Now when I connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash I got the Message Error[270] Update Error
Ur Image file is corrupted.
The bar % run till 1% and the device swich off immediatly.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.06.0000
Please Help me.
Thank You

msmbrt said:
Hello,
I Flashed my P3600 starting from WM 5 with Trinity_Rom_NiAl_Build_23504.
It worked but not at all (pine nuts) so I decided to upgrade again.
The second one, the upgrade stopped while he was runnung and I did the recovery procedure as suggested by the upgrade.
Now when I connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash I got the Message Error[270] Update Error
Ur Image file is corrupted.
The bar % run till 1% and the device swich off immediatly.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.06.0000
Please Help me.
Thank You
Click to expand...
Click to collapse
Error may appear due to corrupt image ROM. download the entire RUU and try again.
In General for archive with firmware.

I've already tried with another RUU but it works the same; really it means not to recognize the ROM installed because if I run the utility and click update to read the ROM just installed and the ROM to update, the utility recognizes only the new but not the present ROM.
The first time I ran it, the utility recognized the installed ROM too and it finished well.

msmbrt said:
I've already tried with another RUU but it works the same; really it means not to recognize the ROM installed because if I run the utility and click update to read the ROM just installed and the ROM to update, the utility recognizes only the new but not the present ROM.
The first time I ran it, the utility recognized the installed ROM too and it finished well.
Click to expand...
Click to collapse
Well.
In an active sinc disconnect connection on USB
- Download splxploit_HTC_Trinity
- Unpack and start
- Then stitch...
Should work

Soft reset=hard reset=blmode help :(

When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA

Mod. edit: not dev related, moved to general
gl though

marcin-25 said:
When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA
Click to expand...
Click to collapse
I had same problem. I just remove battery and wait sometime. It should fix that. Well.. for me it fixed

Yes it's works, but is any chance to fixed it, upgrade new rom or something.

Prapably someone tryied upgrade bigstoragerom. If i could have backup rom, that's no problem, but i don't have. Other rom not start from sd card

I installed WWE 03, because it don't change radio. There was my problem. When I tryed to install roms before i change radio to 1.12 and wwe 03 work fine. So try like I do But you need install via usb cable and windows xp like i do (I don't have windows xp in my pc so I used Vmware workstation)

What's that rom WWE 03? I have 1.00.10 radio, rom 1.13.00 WWE, so? Could you send me working rom, who can flash my pda?

WWE 03 is cotulla rom. It had windows mobile 6.1. And I tryed to install this one, but lot time had errors. Firstly, I try to install this rom and I finaly upgraded radio with this rom 1.12, but OS installation stuck on 0%, so I cancel it. Noww I tried install this rom and everything working. No bootloader after soft reset, working good

Whitch rom you upgrade radio? your link not work I try to install WWE 03, but. i run upgrade.exe, next : your device software is about to be upadte from: (empty) to: (empty) . I click upgrade and here Checing the inforamtion on your device ... please wait, and i'm waiting sooo long :/ nothing change. I think that i must upgrade radio to 1.12, but how? I try many way

First link should work. It work for me. To succesfuly check your devise you should connect pc and PDA via active syns with windows XP. Then it will check your device and upgrade should work for me it worked

I have connected pda (windows xp) activesyns. Always, every rom, whitch i want to upgrade: update from: (empty) to: (empty). Only if i turn ON pda, then upgrade from: 1.0.10 to 1.12, click NEXT and pda goes to bootloader. "checking devace data" and nothing happened. I thing the last chance is upgrade rom from sd card in bootloader mode, but it must be backup rom from own pda This is the end :/ i may throw my megican to trash. Thanks for answers.

You should turn on PDA then connect to pc after that will be upgrade from to filled. When you click next automaticly go to bootloader and install new rom

Yes, i try that. Turn on, connect, upgrade, then pda goes to bootloader mode and nothing happened - "checking device infromation ...... " all the time. Do you know any way to upgrade from the sd card. I can't do a backup and change 416 bytes in new roms, like a say xda-developers tutorial. Without that pda not flash new rom from sd.

If you know anyone from your friends that have magician try get backup from him. If you don't have, last thing that I can advise, try other roms. You can find it there

[Q] phone says update available

Hello all,flashed dft version of wf7 to my hd2 and my phone keeps saying update available but when I hook up to my PC it shows as if it's updating but stalls and says registry error and won't complete....downloaded registry editor but didn't know how to use it.....any suggestions ?????

You can´t update
Hi!
You can´t update the HD2 with Zune because it´s not a native WP7 phone. Just uncheck the two boxes in phone update on your phone. And when you sync with Zune just ignore the update window (press update later). You can brick your device if you proceed......
Wait for DFT team to release the new port of the NODO update, OK?
I´ll give you a tip and that is to read the stickies first ;-)
Br!
Giganten79

good info,thanks for the reply.