[Q] phone says update available - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

Hello all,flashed dft version of wf7 to my hd2 and my phone keeps saying update available but when I hook up to my PC it shows as if it's updating but stalls and says registry error and won't complete....downloaded registry editor but didn't know how to use it.....any suggestions ?????

You can´t update
Hi!
You can´t update the HD2 with Zune because it´s not a native WP7 phone. Just uncheck the two boxes in phone update on your phone. And when you sync with Zune just ignore the update window (press update later). You can brick your device if you proceed......
Wait for DFT team to release the new port of the NODO update, OK?
I´ll give you a tip and that is to read the stickies first ;-)
Br!
Giganten79

good info,thanks for the reply.

Related

[Q] Problems with flashing new firmware on Samsung I8700 Omnia 7

I can't seem to get my Omnia 7 to communicate with Win7 via USB cable in Download Mode. I use Win7 Pro x64.
I've installed:
I8700_Samsung_Mobile_USB_Driver(V5.2)_V1.2.1050.0
I run:
I8700_WP7_Downloader_Ver_7.03_For_Retail_Device_(Product_Force_Select)_
I've even tried uninstalling all Samsung USB drivers, reinstalling them and restarting my system, but I still can't get it to work.
When I start the WP7 Downloader, it says "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". What is that all about? There are no MD5 files in the firmware package that I've downloaded (I8700XXJJ4). If I click "Close", the application dialog opens, but I get no connection to the phone via a COM port.
What am I doing wrong?
[UPDATE!]
I got my Omnia 7 to connect by starting up the WP7 Downloader BEFORE I rebooted the phone into Download Mode. However, I'm still getting the "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". Please help!
Please post in the proper forums. If you have an issue related specifically to that device, please post it there. This is for WP7 development as a whole, and device specific problems go in their proper forums and subsections.
~~Tito~~
To flash, you have to start WP7 Downloader before you plug your Omnia 7 in download mode. And then you'll see a new COM port. (h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21328])
Be carefull : the XXJJ4 firmware seems not to work. It's not a valid binary retail file whereas the DTMJJ6 works fine. I'll flash my Omnia 7 one week ago. (]h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21326]) The DTMJJ6 is a T-Online branded ROM.
My Omnia 7 is a French Orange branded device and with the DTMJJ6, some features don't work anymore as data transfert without WiFi. It's the reason why I advise you to wait an other ROM. In my case I'm waiting for a dump of the original ROM or a new I8700XX.. files but still nothing...
firmware
where did you get the firmware or update, is it possible to get firmwares for other phones like the focus,
Please,
i have I8700XXJJ6 WITH CSC TMUJJ6, the phone is locked to T-mobile UK, and i'm downloading DTMJJ6, will this rom work, if yes, will the phone be unlocked ?
Thanks,
B.R.
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
The new ROM feels snappier due to the better 3g/wireless speeds and gets rid of the horrible tmobile branded IE and searches.
Over all definitely worth trying.
So it's the JK1 which is needed, not the JJ6.
Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
to get it unlocked friend ! how can i do it ?
I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).
DanMaxis said:
I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).
Click to expand...
Click to collapse
DanMaxis,
There might be a way without a jig. In principal you could try updating right through to nodo which would give you the new Bootloader that allows flashing.
What you have to do is "unbrand" your phone with the Samsung unbrand xap which can be found in the wp7 developer forum. (First or second page)
Of course you need to apply the chevron unlock for it.
After having done that you will be able to receive the pre Nodo update and then the Nodo update with the "cut connection after 4 seconds" trick.
After these updates are installed your bootloader should be the new one. This will in theory enable you to reflash a different rom onto it.
In theory... because I havent tried yet.
I encounter an error on my Omnia 7 that it timed out after the first update. This is a common issue among Samsung users (as has been reported all across the web) and the only way to fix it is to hard reset the phone.
Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!
I don't think the MD5 error relates to phone communication - I got this when I tried to open the update file from within a compressed folder - you have to extract the file that is downloaded to another folder then open it through the update tool. You'll also get an MD5 error if you enter the wrong password for the file.
The Control at the bottom left of the update tool window tells you if the phone is connected or not and is separate to actually opening the update files (turns green and says which Comm port the phone is on if the phone is connected properly).
Hope this helps.
do85 said:
Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!
Click to expand...
Click to collapse
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.
DanMaxis said:
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.
Click to expand...
Click to collapse
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?
do85 said:
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?
Click to expand...
Click to collapse
Yes, I think it is the issue described here....
www[dot]winrumors.com/microsoft-reportedly-warns-against-using-chervonwp7-nodo-updater/?utm_source=twitterfeed&utm_medium=twitter&utm_campaign=Feed%3A+WinRumors+%28WinRumors%29&utm_content=Twitter
I've ordered this JIG http:\\cgi.ebay.com/Samsung-Galaxy-S-Omnia-7-Fix-Download-Mode-USB-jig-/130475201436
Let's see what happens.

Official NoDo

Official NoDo is now rolling out, atleast to unbranded Trophy's
Mine was updated with the leaked HTC Trophy RUU some time ago, but im still getting the official one hopefully its a newer "build"
same here OP.
I noticed just the OS version changed from 7389 to 7390
both firmware and radio keep the same
:/
Nothing on my debranded Trophy :/.
Nothing on my Trophy :-(
I tried it with the registry unbranding method. But unfortunately no Update yet.
1. Start Zune
2. Turn off Data connection and Wifi on the Phone
3. Connect the Phone with the PC (USB)
4. Start the update search in Zune
5. About 3-8 seconds later, disconnect your PC from the internet (Turn WLAN/LAN off).
6. Zune finds NoDo-Update.
7. Connect to the internet again and install the update.
NoDo Update
Hi All,
UK Vodafone NoDo update is now available, updating my phone now

HTC Trophy doesn't start anymore

Recently I have updated the March update of Windows Phone and the process have stucked in 8 of 10 and the Zune have closed incorrectly and my Trophy have turn off and now I can't start it anymore. I press the power button and nothing happend.
Any help?
Thanks in advance.
any tips please?
Same problem, what did you do?
I wasn't able to start it anymore. any tips you guys?
Zune has made ​​a backup of your system. go into the settings to restore
I have the same problem. I just updated my HTC Trophy to the latest version of from 4. January 2012 (v7.10.8107.79).
Before I updated my phone I had the version 7.10.7740.16 from 17. Nov. 2011.
No hacks, no jailbreak or anything else. It was just offical developer unlocked.
So, I started the update and it after the reboot on step 9 of 10 it started vibrating 7 times in a row. After that it was just hanging on the HTC logo boot screen. After an hour or so I disconnected the phone and removed the battery. When I start the phone I got always those 7 short virations and it hangs on the logo screen.
I tried the hard reset as well without success.
Does anybody have an idea what I can do with my phone?
BTW: I made the update with my MacBook Pro but with a nativ windows installation on it.
Thanks in advanced.
What carrier is your Trophy on? You should attempt to flash the stock rom back onto it.
It's a Swisscom branded phone from Switzerland. But I use it atm anyway just as a test device without a SIM card.
How can I do that to flash the stock ROM on my phone? Do you have a link where I can get some instrutctions?
Thanks
EDIT:
I found this thread, I will try this to solve my problem. I'll let you know if it works.
http://forum.xda-developers.com/showthread.php?t=1257986
You can also forgo trying to use that method and use the HSPL process to try a rom like DFT Freedom. It will let you do a lot of neat things a stock rom cannot do (like run Opera).
You would then download HTC Connection Setup and change the carrier settings to your carrier (so you would recieve SMS, etc).

[Q] Not work

Hi i'm flash device this rom WP7 7592 Green Mango with market place but it's not work for me any idea
This say connect Zune and wait wait than boot

[Q] after update get error on WM7 [n00b]

Hello xda-developers ...
I recently buy a HTC HD2, but yesterday I try to update form WM6.5 for WM7 after the turn and WM7 phone, but it gives me error rom and stuck ...
what do I do now? can flash stock rom and agane place, or what can I do?
sorry for this thread, but I'm a big noob in this topic
ps: my phone is all stock and is the EU version
(WM -> windows mobile)
orio76 said:
.......... but it gives me error rom and stuck ...
what do I do now?.
Click to expand...
Click to collapse
1st you can tell us what the error says, and what 'stuck' means, , (hanging at magldr menu? hanging on splash screen?)
2nd, whilst preparing for win7 did you remember to 'use last 24mb' in magldr?
hello...
thx for try to help me...
1 -> the error only say "rom error" and stop here, don't do anything (hanging on error/splash screen)...
2 -> i guess no...
is my first time to do this... i don't know anything from this, only try and screw up...
is possible recover the phone?
thx for help
Try redownload it and flash again. Use task29 and flash stom rom to be sure. And it's WP7 (Windows Phone 7), not Windows Mobile 7
hello again
the error is "flash type 6510bcad power reason 1 bootup_w_pwr_key_pressed" can be fix for the task 29?
thx for the help...

Categories

Resources