Hello xda-developers ...
I recently buy a HTC HD2, but yesterday I try to update form WM6.5 for WM7 after the turn and WM7 phone, but it gives me error rom and stuck ...
what do I do now? can flash stock rom and agane place, or what can I do?
sorry for this thread, but I'm a big noob in this topic
ps: my phone is all stock and is the EU version
(WM -> windows mobile)
orio76 said:
.......... but it gives me error rom and stuck ...
what do I do now?.
Click to expand...
Click to collapse
1st you can tell us what the error says, and what 'stuck' means, , (hanging at magldr menu? hanging on splash screen?)
2nd, whilst preparing for win7 did you remember to 'use last 24mb' in magldr?
hello...
thx for try to help me...
1 -> the error only say "rom error" and stop here, don't do anything (hanging on error/splash screen)...
2 -> i guess no...
is my first time to do this... i don't know anything from this, only try and screw up...
is possible recover the phone?
thx for help
Try redownload it and flash again. Use task29 and flash stom rom to be sure. And it's WP7 (Windows Phone 7), not Windows Mobile 7
hello again
the error is "flash type 6510bcad power reason 1 bootup_w_pwr_key_pressed" can be fix for the task 29?
thx for the help...
Related
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
i got the problem solved =)
guess it came from it self couse i was nurvios )))
i entered the hard boot menu pressed the UP (volume) button and then pressed 2 time i think the up(coluve) and down(volume) then it not entered the boot option but connected the USB ...
i installed other ROM and its working fine again ... )))))
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
[email protected] said:
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
Click to expand...
Click to collapse
And then there are the 999 who think they have done something clever, but still bricked their phone...
gladly im not one othe 1\1000 people that done it =)
i had my luck on this one =)
i guess i was celebrated too early...
i tryed to delete the HSPL
by the video tut ... ( yeh yeh ... what can be more easier )
well ...
it says to get a stock rom ( i did it )
it say to put it on the SD after formating it to 32 bit ( i did it )
then hard boot ... ( i did it )
power button ...
and ........... puff ...
now i get: ( On boot ):
PB81100 HX-BC
SPL-1.42.0000 XE
microP(LED) 0x05
microP(TOUCH) 0x03
Upgrage ROM code error
Please try again ...
WHAT IS THAT ? :`(
dose it means i brick it ?
(p.s.)
Tryed to install the HSPL again ...
the install is successfull. ... but no change on the device ...
you have used the wrong rom.
you must use the correct rom that was on the phone when you got it.
Or the correct region. In doubt, just enter your phone's serial number on the HTC download page (here for 1.66) to make sure you get the correct official rom.
Then extract it, put the nbh on your card, etc.
" Sorry, this software download is not suitable for your device. "
hhmm .... i had the hong kong rom originaly ...
maybe it means i have to download it from an hong kong htc site ?
yes....choose the hk site
Are you solved the problem?
How?
I have a similar problem.
I have the same screen at boot, but when I try load anything my device as stuck in progress bar (0%) even for shipped rom’s…
This happens when I try load a shipped rom from SD. Before that I have loaded several cocked rom’s from SD without problem.
the fix...
hold volume up and down together and insert the USB cable then run a different or a good ROM
Bricked friends hd2!!!?!?
PLEASE HELP... I was trying to install android throught NAND on my friends hd2,, in the process of flashing the ROM via Magdalr or whatever.. it froze so i pulled the battery.... and it doesn't turn on. I've pulled the battery on my other friends HD2 so im confused as to why this one in particular does not turn on! PLEASE HELP!!! SHE'LL KILL ME IF SHE FINDS OUT!!!
EDIT: PHEW i figured it out... but im having trouble installing these ROMs
Did i brick my phone??
So my brother was trying to do who knows what to my hd2 and now the hd2 powers on and it says "stick together" (its a t-mobile hd2) and it just stays on that screen.. I'm not the most tech savvy person so bare with me... usually below where it says "stick together" it would show a bunch of numbers and codes and after a few seconds it would load windows mobile and the phone would work fine. However, mine just stays on the stick together and theres no more of those numbers and codes on the bottom.
Did he just brick my phone? And if he did... HOW THE HECK DO I FIX THIS???
HELP :*( i need to use my phone!!
Thanks
Heh I'm in the process of doing my very first flash to get a full install of Andriod 2.2 on my HD2, once I find out a specific answer I've been looking for I'm gonna start the process
HD2 brick
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Did you try to turn on your mobile pushing "vol down" to load usb mode ?
After that, you can flash an official rom.
That "saves" my Leo...
NarkotiQUE said:
I tryied update RADIO
Click to expand...
Click to collapse
if the radio had 51 in the version (example 2.07.51.xx) then it is a brick, dead, gone.
NarkotiQUE said:
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Click to expand...
Click to collapse
Did you have any luck? Does your device have HSPL? Let me know if you still need assistance.
xtntx said:
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
Click to expand...
Click to collapse
hi i'm looking for a motherboard htc hd2 bricked? can you sell yours?
hi all i ran this program as per the guide and got to the whare it says load rom and since then it has stuck on the loder screen sayin stick together the frist part went ok when it says do u see weve hack'd it can any one help , have i brick'd the phone
samuel79 said:
hi all i ran this program as per the guide and got to the whare it says load rom and since then it has stuck on the loder screen sayin stick together the frist part went ok when it says do u see weve hack'd it can any one help , have i brick'd the phone
Click to expand...
Click to collapse
task29 erases EVERYTHING from your internal storage.
To flash a ROM now turn off the phone (battery pull).
hold the volume down key and press power.
You will now be at a tri-color screen.
now flash any WinMo rom from RUU or flash magldr for Android/WP7.
i have dwonload the omega file but it wont start up but in my frends pc it runs but cant find the phone
samuel79 said:
i have dwonload the omega file but it wont start up but in my frends pc it runs but cant find the phone
Click to expand...
Click to collapse
when you plug your phone into your PC and you're in bootloader does it say "USB" on the phone?
edit: you on a tmobile USA phone or international one?
uk t mobile unlockd when i try'd it in my frends pc it says it dectects the procsser but wont install hardwaare but it dont have activesync on it /running xp
samuel79 said:
uk t mobile unlockd when i try'd it in my frends pc it says it dectects the procsser but wont install hardwaare but it dont have activesync on it /running xp
Click to expand...
Click to collapse
You don't need activesync on it since you are running from the bootloader. The only reason you would use activesync is to get it into bootloader mode.
does it say USB on your phone in bootloader when you connect it?
task29 erases everything except the HSPL...
so...after task29...
flash your stock ROM and done!
OR
if you want to use a custom ROM that INCLUDES a radio, then flash the ROM and done!
OR
if you want to use a custom ROM that DOES NOT INCLUDE a radio, then flash the chef recommended radio and ROM and done!
i have a feeling this "omega" ROM you speak about might not include a radio. this would be mentioned in the thread of the omega ROM...read and proceed accordingly.
I had the same problem. Turns out it won't work on my Lappy that is running XP but when I tried again using my wifes Lappy with Windows 7 it went straight on. I was at it for two days trying to get it to work. Took only a few minutes once I swapped Lappy's!!.
My HD2 has no rom. Im able to access the bootloader, which says SPL-2.08.0000. I tried to install stock rom 2.10 and 3.14 from tmobile using 2gb MicroSD card, but phone gets stuck in the grayish screen saying "loading" or install in progress but actuall goes no where.
I can't do it via a USB connection because my computer keeps trying to install the device driver and it can't find it. So I think the MicroSD card is the only option buts its not working for me as I mentioned.
I'm new today to XDA, and dont know what other steps to take. Thanks in advance to all.
Update: At one point, it started the install and stopped with the message: Radio_v2 - RSA failed
The drivers you need fmto get the required HTC USB Synced connection in the bootloader is included in the Active Sync (for XP) and Windows Mobile Device Center (for Vista and Windows 7). Click on the guide linked in my sig as there is a link in the guide to the Microsoft site that has the both of them.
The radio fail message means it failed to install the radio version that is with the stock ROM so the install of the ROM was aborted. Maybe flashing via USB will work if not you may have a hardware issue.
I can't get my phone to load a rom either but I accidently tried to put a touch pro 2 rom on mines not paying attention so what I want to know is if their is a way to erase the memory for flashing I did a master reset with the phone off already anybody else ran into this problem if so do u know what I could do
sharnellbraden said:
I can't get my phone to load a rom either but I accidently tried to put a touch pro 2 rom on mines not paying attention so what I want to know is if their is a way to erase the memory for flashing I did a master reset with the phone off already anybody else ran into this problem if so do u know what I could do
Click to expand...
Click to collapse
The only thing I know of that you can do to "erase the memoy" as you said. is to one use MTTY or just a Task 29. Sorry I can not find the original tread on MTTY for HD2 but that one should still work for you. The best thing in my oppinion though is to just run a Task 29 as it is the easiest and does the same as the MTTY. plus jst so you know when you flash a stock ROM it runs a Task 28 (wich is pretty much the same thing, some do argue this fact though) before it flashes the ROM.
Go and check out recognized developer ksubedi's HD2 NAND Toolkit. It makes doing anything to the NAND ofthe HD2 very easy and simple, including Task 29.
Now the only concern I have is can you still get to the bootloader by powering on the HD2 while holding the volume down button down? Cause if not you you bricked the HD2 when you flashed the wrong ROM by accident. If you can you can still run th Task 29, oh and you have to have HSPL flashed to the HD2 to use the Task 29 also.
Hey guys my hd2 works well at least 4 weeks now.
untill 3 days.. i was on holiday when my hd2 (with an sd rom version of android --> a nexus one build) freezed and now it shows only white and black stripes untill i turn it on -.-
i tried to install a stock rom ... install madglr or even task 29, but i always get an error (the image file is corrupt etc.)
can someone help me?
(sry for my bad english / it isn't my favourite subject )
MaidenComesStraighToHell said:
Hey guys my hd2 works well at least 4 weeks now.
untill 3 days.. i was on holiday when my hd2 (with an sd rom version of android --> a nexus one build) freezed and now it shows only white and black stripes untill i turn it on -.-
i tried to install a stock rom ... install madglr or even task 29, but i always get an error (the image file is corrupt etc.)
can someone help me?
(sry for my bad english / it isn't my favourite subject )
Click to expand...
Click to collapse
I don't understand... You have SD Android and your screen displays black and white stripes when in both Android and Windows Mobile or only on Android?
Its bit confusing..
i had win mobile on my hd2 but i installed madglr in order to start the sd version of android automatically so i didn't start win mobile ...
now nothing starts -.- i start my mobile phone and from first boot it shows black and white stripes :s
what i didn't understand before that i couldn't start win mobile after installing madglr but this wasn't so important because i often use android
MaidenComesStraighToHell said:
Its bit confusing..
i had win mobile on my hd2 but i installed madglr in order to start the sd version of android automatically so i didn't start win mobile ...
now nothing starts -.- i start my mobile phone and from first boot it shows black and white stripes :s
what i didn't understand before that i couldn't start win mobile after installing madglr but this wasn't so important because i often use android
Click to expand...
Click to collapse
Unrelated, but a bit of advice for the future is to read things such as this very thoroughly before doing anything. I understand that stuff like 'terms and conditions' don't really need to be read, but you can potentially ruin an expensive piece of technology here!
Also, can you get into the bootloader (press and hold volume down+power button when booting up)?
yes i come into the bootloader...
but i can't install a radio rom a stock rom task 29 or madglr (alswas says: image file corrupt)
trying to istall a rom from the sd card... it shows loading for short time and than back to the three- coloured display
MaidenComesStraighToHell said:
yes i come into the bootloader...
but i can't install a radio rom a stock rom task 29 or madglr (alswas says: image file corrupt)
trying to istall a rom from the sd card... it shows loading for short time and than back to the three- coloured display
Click to expand...
Click to collapse
Oh, sorry, I should have read more in this case
Unfortunately, I have little experience. Maybe someone else will be able to help you out sorry.
Are you trying to go back to win6.5 or android??
Doens't matter however my hd2 shows a welcome to a os an i can write sms and listen to my music
hello,
yesterday i was booting up my phone but it stucks at the green HTC logo and then i've performed a hard reset but it had no succes it still stucks at the HTC logo. I've searched on google for the problem but nothing of all the answers worked for me. last night i've let the battery out for 8 hours and when i put it back in it boots into de welcome screen of windows mobile 6.5 but there it freezes again so i pulled out the battery and when i rebooted the phone it stucks again at the HTC logo. I've tried to install the newest rom from the HTC site but it still stucks at the HTC screen
i don't have hspl so i cant try different roms
i hope someone can help me
sorry about my english it sucks
technobram said:
hello,
yesterday i was booting up my phone but it stucks at the green HTC logo and then i've performed a hard reset but it had no succes it still stucks at the HTC logo. I've searched on google for the problem but nothing of all the answers worked for me. last night i've let the battery out for 8 hours and when i put it back in it boots into de welcome screen of windows mobile 6.5 but there it freezes again so i pulled out the battery and when i rebooted the phone it stucks again at the HTC logo. I've tried to install the newest rom from the HTC site but it still stucks at the HTC screen
i don't have hspl so i cant try different roms
i hope someone can help me
sorry about my english it sucks
Click to expand...
Click to collapse
You should try to put in a freezer(in a plastic bag, without battery) for 15-20 minutes and then try to flash your wm ROM and see what happens...
ive installed android nand on it and it works until it suddenly freezes
so maybe it is an overheating problem??
technobram said:
ive installed android nand on it and it works until it suddenly freezes
so maybe it is an overheating problem??
Click to expand...
Click to collapse
It looks like that to me!
Have you tried not using the latest HTC ROM but the previous version. Could be a bug in the ROM or possibly bad blocks causing a problem. I would suggest a task 29 wipe before installing the ROM. Can be found easily in the forum. I had a similar problem that fixed it for me. On android now though.
Maybe increase the cache partition and the ROM partition to allow for possible bad blocks that can cause problems especially in nand. Usually allowing an extra 5mb on each partition should do it. If you dont know how find the hd2 toolkit as that will be the easiest way. All on the forum. Hope this helps
Sent from my HTC HD2 using xda app-developers app
bobby1503 said:
Have you tried not using the latest HTC ROM but the previous version. Could be a bug in the ROM or possibly bad blocks causing a problem. I would suggest a task 29 wipe before installing the ROM. Can be found easily in the forum. I had a similar problem that fixed it for me. On android now though.
Maybe increase the cache partition and the ROM partition to allow for possible bad blocks that can cause problems especially in nand. Usually allowing an extra 5mb on each partition should do it. If you dont know how find the hd2 toolkit as that will be the easiest way. All on the forum. Hope this helps
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
oke ive installed hspl and if i install a different rom it still freezes at the htc logo so tommorow im going to try installing stock rom v1.66
but now i'm going to sleep
(i live in the netherlands so its a different time)
technobram said:
oke ive installed hspl and if i install a different rom it still freezes at the htc logo so tommorow im going to try installing stock rom v1.66
but now i'm going to sleep
(i live in the netherlands so its a different time)
Click to expand...
Click to collapse
Putting in the original romantic should fix this.. Just sounds like the partitions are not big enough or the ROMS could have issues. When installing the original rom it should clear the whole phone and boot up fine. Might take a while on first boot.
Sent from my HTC HD2 using xda app-developers app
oke this is weird if i wanna install any stock rom it says:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
update terminate
UPDATE FAIL
what should i do??
technobram said:
oke this is weird if i wanna install any stock rom it says:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
update terminate
UPDATE FAIL
what should i do??
Click to expand...
Click to collapse
This looks like a wrong radio flash
bib*oops said:
This looks like a wrong radio flash
Click to expand...
Click to collapse
oke thanks but what should i do now?
right now i can't flash any stock rom
technobram said:
oke thanks but what should i do now?
right now i can't flash any stock rom
Click to expand...
Click to collapse
Unfortunately I can't suggest you a solution, I'm looking for a way out of this too...
have u tried booting into bootloader?
?!
rprevis said:
have u tried booting into bootloader?
Click to expand...
Click to collapse
Have you read previous posts, at least?
sorry for the late response but ive tried all the solutions but they all did not worked
i have the exactly same problem...
and i dunno what todo now...
PS. Seems that i cant flash anything in the bootloader mode...
oke i've discovered that it is a vodafone branded phone.
so then i've tried to put the vodafone romm on it.
so first i performed a task 29.
and then i've replaced hardspl with the original spl (v 3.03.0000)
but after that it wont boot anymore the screen just stays black i can't even boot into the bootloader
it just makes a weird clicking noise and the scren stays black
does anyone knows a solution for this
technobram said:
oke i've discovered that it is a vodafone branded phone.
so then i've tried to put the vodafone romm on it.
so first i performed a task 29.
and then i've replaced hardspl with the original spl (v 3.03.0000)
but after that it wont boot anymore the screen just stays black i can't even boot into the bootloader
it just makes a weird clicking noise and the scren stays black
does anyone knows a solution for this
Click to expand...
Click to collapse
Are you sure it was a Vodafone HD2? Does it have a red end/power button and a green call button? If it does then that is a TMOUS that does not have the T-Mobile logo on it for some reason and you have radio bricked the device. The fact that you can not boot into bootloader means you are bricked period even if it is not a TMOUS HD2. Now the only fix for your device is to have it JTAGed or a new PCB board put in the device. Now if you can not find someone locally or in your region of the worl that can JTAG your device PM me and I can refer you to someone that can and is very good at it.
i live in the netherlands si it's very hard for me to find someone that can perform a jtag
Same problem for me
I have exactly the same problem.. :crying:
Try this just for grins.
Take out the battery and MAKE SURE all of the pins on the back of the device are hitting the battery where they are supposed to and not bent or anything.
I don't see how doing a task29 and changing the SPL would brick the phone if it DID brick,it should have done it after the ROM or Radio flash.
If you did things in this order ROM -> reboot -> task29 -> reboot -> SPL, then you should still be able to access bootloader.
Not sure why you'd flash a ROM then task29 though.
Anyways, if you flashed the wrong ROM from SD then yeah, you are bricked (if that was the last thing you did) but try the battery thing.