Related
anyone can help me?
.
after check my HD2 version is 1.42, I started the HSPL program, and after some time, it shows "xxxx hacked" on the HD2, but unfortunately, at this time, my computer showed an error, and the HSPL program stopped.
after that, whatever I do, HD2 can't started anymore. It shows an white triangle plus "!" on the screen.
.
what should I do now?
esuper said:
anyone can help me?
.
after check my HD2 version is 1.42, I started the HSPL program, and after some time, it shows "xxxx hacked" on the HD2, but unfortunately, at this time, my computer showed an error, and the HSPL program stopped.
after that, whatever I do, HD2 can't started anymore. It shows an white triangle plus "!" on the screen.
.
what should I do now?
Click to expand...
Click to collapse
extract with winrar the .exe from a stock rom i.e. 1.48 wwe.
copy the .nbh file to your sd card and rename it to leoimg.nbh (format your sd card to fat32 first).
put your sd card to your device.
hold both volup and voldown hardware buttons and reset your device.
follow the steps and hspl will be erased.
gianton said:
extract with winrar the .exe from a stock rom i.e. 1.48 wwe.
copy the .nbh file to your sd card and rename it to leoimg.nbh (format your sd card to fat32 first).
put your sd card to your device.
hold both volup and voldown hardware buttons and reset your device.
follow the steps and hspl will be erased.
Click to expand...
Click to collapse
where can I get the 1.48 wwe.?
put ur serial number in here (assuming you're in the UK)...
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
failing that, get it in here...
http://www.4shared.com/account/home.jsp
I'm not in UK, I'm in china
THEREFORE, the links doesn't work.
By the way, if I follow your instruction and upgrade to rom 1.48, how can I use the HSPL? since it's for 1.42 only.
esuper said:
I'm not in UK, I'm in china
THEREFORE, the links doesn't work.
By the way, if I follow your instruction and upgrade to rom 1.48, how can I use the HSPL? since it's for 1.42 only.
Click to expand...
Click to collapse
It worked for me on the 1.48 ROM. My phone shipped with it, and installing HSPL was the first thing I did so I could flash other ROMS.
I have heard that sometimes, you need to run it more than once if it doesn't work....but for me... it worked the first time.
Mine errored out somewhat similar to the OP's case. I just ran HSPL again and it said it completed successfull.
HINT: Make sure you choose the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time, it errored out and closed. Second time, i hit yes and it was success.
mikron15 said:
Mine errored out somewhat similar to the OP's case. I just ran HSPL again and it said it completed successfull.
HINT: Make sure you choose the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time, it errored out and closed. Second time, i hit yes and it was success.
Click to expand...
Click to collapse
What made you decide to press "no"? Also, make sure not to do anything else but move the mouse from time to time during the flashing. Dont bring up other tools, windows' start menu, use keyboard shortcuts to do anything; in other words, dont touch your keyboard, dont click your mouse, just move your mouse around to ensure it doesn't start the screensaver
Hold down the Volume Down button and "click" the power button to start up the phone in Boot Loader mode with the 3 color screen. You should see "Serial" on the screen. Now, plug in the USB cable to your PC, and the "Serial" should change to "USB". Start up HSPL and try loading it again to your phone.
If it doesn't work, try the same procedure again. I thought I had bricked my phone by trying to load a ROM that wasn't made for my region, and I had to retry loading HSPL 3 times before it worked.
mikron15 said:
.... the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time,
Click to expand...
Click to collapse
lol, it doesn't say "do you want to display hacked"....it says can you see hacked on your display?"
Sorry for the double post but my other one is on page 94 of a different thread and probally wont get seen and i am now getting desperate,anyway
I have just followed the procedure as I was going to install a different ROM from ★ Miri & DINIK "Anastasia" ROM to replace my installed ROM from ENERGY
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
First I did a task 29 and now I am now stuck in the bootloader screen with its tri colour screen with USB in the white part,if I have the cable connected or Serial if the cable is removed.
I have tried a few times but it still stays on the boot screen.I am running windows 7 32 bit on my laptop and have tried all 3 different USB ports with the same result.
How do I get the phone back working?
Thanks
Your Phone is stuck in the bootscreen because you have removed the operating system with the task29. so this is normal.
make sure you have transferred the leoimg.nbh to the storage card and disconnect the phone from the cable. reboot the phone and flashing should start automatically. if it does not
now connect your phone to the computer and you will see the screen change from serial to usb
just follow the procedure as described in on the forum to flash from a computer. you do not need to be connected to activesync to do this as the phone is already in bootloader mode. just start the flashing program as described.
Thanks for that,I did realise thats the reason its stuck in the bootloader.I have connected the phone back to the computer a few times and waited untill the USB came onto the screen but the divice does not show up in "My Computer" and when I try to restore the ROM I get a 260 connection error.
I think I have just sorted the problem,not sure the reason but it was failing on a 16GB fat32 card. I have just borrowed a 2GB card from a friend put exactly the same image on and it is now updating the ROM.
Thats strange how the card has made that much of a difference,but thanks anyway.
I'll let you know how the update goes in a few minutes when it completes.
Thanks
many people have said the same thing. 16 doesn't work, 8 sometimes works, 2 usually works.
Up and running great now,,Looks like i'll have to invest in a small 2GB card as a back up,
Thanks again
Stuck also in bootloader
wilcovh said:
Your Phone is stuck in the bootscreen because you have removed the operating system with the task29. so this is normal.
make sure you have transferred the leoimg.nbh to the storage card and disconnect the phone from the cable. reboot the phone and flashing should start automatically. if it does not
now connect your phone to the computer and you will see the screen change from serial to usb
just follow the procedure as described in on the forum to flash from a computer. you do not need to be connected to activesync to do this as the phone is already in bootloader mode. just start the flashing program as described.
Click to expand...
Click to collapse
I flashed my HTC Leo to Dutty Multi-lang, when finished and reboot it won't and gets stuck in the "stick together" bootloader (yes, I am with TMOUS). I did what you suggested but it still won't boot, please help!
paulzhang07 said:
I flashed my HTC Leo to Dutty Multi-lang, when finished and reboot it won't and gets stuck in the "stick together" bootloader (yes, I am with TMOUS). I did what you suggested but it still won't boot, please help!
Click to expand...
Click to collapse
is the multi lang one the one with the base 3.04 rom? that 3.04 base isn't from tmous, have you confirmed it is tmous compatible? (i dont know enough about teh 3.04 rom)
samsamuel said:
is the multi lang one the one with the base 3.04 rom? that 3.04 base isn't from tmous, have you confirmed it is tmous compatible? (i dont know enough about teh 3.04 rom)
Click to expand...
Click to collapse
It is 3.28.4.0
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
samsamuel said:
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
Click to expand...
Click to collapse
And how would you do that if the darn phone won't boot? I can copy a known ROM onto the card, but then how do I flash it from there? Thanks.
paulzhang07 said:
And how would you do that if the darn phone won't boot? I can copy a known ROM onto the card, but then how do I flash it from there? Thanks.
Click to expand...
Click to collapse
no need for sd card,,,boot into boot loader, connect usb, run your flash.
samsamuel said:
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
Click to expand...
Click to collapse
Problem resolved... not sure what caused it but I am a happy man now. This is what I did if this helps with people who might have the same problem.
1. Formated the SD card FAT32.
2. Copy and rename nbh file to LEOIMG.nbh to SD card.
3. Reset the phone while holding the down button. It jumps to bootloader.
4. Hook it with PC, USB is shown on the phone.
5. Download and extract SSPL_RUU.exe and RUU_signed.nbh from Dutty Cream la de Cream ROM into the same folder.
6. Run SSPL_RUU and it came up and running again.
Thanks for your help though, made me feel hopeful because I was getting ready to dump the phone and run over it with my car
no worries, just for info, step two was not needed, it would have tried to flash leoimg at step three if you hadn't been using the stock gig sd card (the 16gb cards don't work, which is why the phone ignored it.)
paulzhang07 said:
Problem resolved... not sure what caused it but I am a happy man now. This is what I did if this helps with people who might have the same problem.
1. Formated the SD card FAT32.
2. Copy and rename nbh file to LEOIMG.nbh to SD card.
3. Reset the phone while holding the down button. It jumps to bootloader.
4. Hook it with PC, USB is shown on the phone.
5. Download and extract SSPL_RUU.exe and RUU_signed.nbh from Dutty Cream la de Cream ROM into the same folder.
6. Run SSPL_RUU and it came up and running again.
Thanks for your help though, made me feel hopeful because I was getting ready to dump the phone and run over it with my car
Click to expand...
Click to collapse
Thanks I did these steps a million times and now Im still in the bootloader screen. What else can I do? Thanks for the help.
im also still with hang with that problem.even tried jteg.but wont successful .bc of i tried to restore from win7 to 6.5. now still set is dead from long time
Hello all. Last night i flashed both my and my girlfriends t mobile branded hd2's to android 2.2 using magldr and a DFT android rom. Since then her 3g service randomly starts and stops as well as both of our devices have lost the ability to be read on a pc. I want to restore her device to the stock t mobile rom but the rom i downloaded from their website ends up stating that there is a usb error. Could someone please help me. Much appreciated.
I did some searching around and came across this: http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
Which was off of this page, which is most likely what you installed on your HD2s (NAND android correct?) http://www.jayceooi.com/2010/12/31/how-to-install-nand-android-on-htc-hd2/
BTW, which radio version are you running? It seems that your builds want the 2.15 radio.
thank you so much for replying, this is the nand android that i flashed with but i cannot for the life of me find an official tmobile rom that will work with magldr to reflash her phone. O and how do i go about finding out the radio version???
Bear with me since I've never NANDandroid'd my HD2's, only have run them from my SD cards. My understanding is that magldr can be removed by just reinstalling another flash, like Tmo's 3.14 or 2.13.
Is this the exact NAND you installed? http://forum.xda-developers.com/showthread.php?t=893620 It says "Uninstallation:
It is possible to downgrade to original Windows Mobile 6.5, by just flashing to an Official ROM.
Both MAGLDR and Android will be removed"
My bet is that you'll have to do the SD card method of reflashing:
Remove your sim card, then
Download a stock rom, unpack it, and...
.
1. Place the LEOIMG.nbh on a 8GB or smaller microSD card.
2. Remove the battery cover and press the Reset button.
3. Hold the Volume Down and End Call (power) buttons at the same time.
4. As soon as "Searching..." appears on the screen, release the Volume Down button.
5. ROM will flash. Be sure to hard-reset afterwards to prevent weird errors (as usual). (credits to snarksneeze)
To find your radio version, check in android's about phone section in the settings menu. I don't know of any other way other than maybe the bootloader screen (3 colors, red, green blue), might list it (volume down and power button).
japookie said:
thank you so much for replying, this is the nand android that i flashed with but i cannot for the life of me find an official tmobile rom that will work with magldr to reflash her phone. O and how do i go about finding out the radio version???
Click to expand...
Click to collapse
Ok the closest thing that i have found online is a custom rom called "Kumar's Leo Touch Prem V3.0 S23142-WWE.nbh". Now i am completely lost after the step that states Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
ok i tried renaming the rom and copying it to the sd card but when i try to reboot by holding the power key and the down volume rocker the phone just continually vibrates and never restarts. When i try a regular reboot by holding the power button i can either go back into android or pull up magldr but not flashing options for winmo
Wait a minute...don't use that Kumar's ROM, it's for the Euro HD2 (512MB) --it'll probably brick your US TMO HD2 (1024 MB).
Ok, find a TMO USA nbh file, then rename it to LEOIMG.nbh, then copy it to the the microSD card with a card reader. Next, put the microSD card back in the phone and remove the SIM card (some folks say it's better to flash without the SIM card in).
Make sure before you flash that your battery level is more than 50%! Enter the bootloader by doing the following:
To place the HD2 into Bootloader mode,
1. Place the LEOIMG.nbh on a 8GB or smaller microSD card.
2. Remove the battery cover and press the Reset button.
3. Hold the Volume Down and End Call (power) buttons at the same time.
4. As soon as "Searching..." appears on the screen, release the Volume Down button.
5. ROM will flash. Be sure to hard-reset afterwards to prevent weird errors (as usual). (credits to snarksneeze)
japookie said:
Ok the closest thing that i have found online is a custom rom called "Kumar's Leo Touch Prem V3.0 S23142-WWE.nbh". Now i am completely lost after the step that states Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
Click to expand...
Click to collapse
WOW thanks a million before i bricked the phone, the closest thing to a t mo nbh file that i have found so far is what i am assuming is a rom labeled "T-Mobile_HD2_MR_Software_3.14.531.1.exe". I will continue scouring the net until i find something and again THANKS A MILLION
Ok here's the thread that'll save your day:
http://forum.xda-developers.com/showthread.php?t=681317
at the end of the first post is a ROM for you. Copy that to the microSD card and go from there, following the instructions. I forgot since it's been a while since I've done it that you need an 8gb or smaller microSD card, the 16gb one doesn't seem to work for flashing.
Here's your 2.10 stock TMO USA rom, http://devftp.xda-developers.com/files/zelendel/LEOIMG.nbh after you get this installed, perhaps your USB connectivity will be back and you'll be able to later update to 3.14 if you so choose (http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2) or 2.13 (http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo)
1. Place the LEOIMG.nbh on a 8GB or smaller microSD card.
2. Remove the battery cover and press the Reset button.
3. Hold the Volume Down and End Call (power) buttons at the same time.
4. As soon as "Searching..." appears on the screen, release the Volume Down button.
5. ROM will flash. Be sure to hard-reset afterwards to prevent weird errors (as usual). (credits to snarksneeze)
japookie said:
WOW thanks a million before i bricked the phone, the closest thing to a t mo nbh file that i have found so far is what i am assuming is a rom labeled "T-Mobile_HD2_MR_Software_3.14.531.1.exe". I will continue scouring the net until i find something and again THANKS A MILLION
Click to expand...
Click to collapse
Download that .exe you where talking about and extract it to gain the .NBH file you need.
You know what's wierd is I used to be able to extract/decompress that .exe file! Now I can't, I figured I probably uninstalled the program that does that on my computer. Anyway, I was going to recommend to the OP to do that except that he might not have the program to decompress that .exe as well, so I figured I'd make it a little easier for him by suggesting he download just the .nbh file from the forums.
Hey guys, Im not new to this flashing thing so Im ata complete loss as to what Im doing wrong.
Im running magldr v1.13 w/ CWM and a MyTouch 4G installed. I need to go back to Tmo WM6.5 so I can return the phone under warranty. I have read the guides over and over and I have no idea what Im doing wrong.
I have tried 3 separate computers XP, Vista, and Win7 and 2 cables, however when on the bootloader screen I never get the "USB" at the bottom when plugged in. I can select USB flasher and it connects to the computer, same with USB MassStg.
I really appreciate any advise here....
just flash via sd card.
from mskip's guide:
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
worked, thank you!
Can someone point me to where I can find the stock rom for my USA T-mobile HD2? (link maybe??) I have been unable to find where to download it.
I also tried going to HTC.com and I couldn't find it there either.
What happened was that I had the Android 2.2 nand on it and now the touch screen has stopped working. The physical buttons work fine. I tried to reinstall android but it failed and now it won't boot into android. I would like to bring it back to factory Windows Mobile and if the touch screen still does not respond, then see if I can take it back to T-mobile.
jimvsmij said:
Can someone point me to where I can find the stock rom for my USA T-mobile HD2? (link maybe??) I have been unable to find where to download it.
I also tried going to HTC.com and I couldn't find it there either.
What happened was that I had the Android 2.2 nand on it and now the touch screen has stopped working. The physical buttons work fine. I tried to reinstall android but it failed and now it won't boot into android. I would like to bring it back to factory Windows Mobile and if the touch screen still does not respond, then see if I can take it back to T-mobile.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=577717
And how to return phone to stock..
http://www.youtube.com/watch?v=vPeuNLzqnJg
Hi Guys,
I am getting desperate with my HD2. I've read and tried most of your advices here on XDA, but I can't get rid of HSPL from my phone and return to stock ROM to send it for repair.
When I tried to flash my phone directly from SD card with renamed .nbh file, it would always get stuck at some point of installation and would leave me with phone that wouldn't boot, neither Android nor Windows. When I flash the phone thru USB while in boot loader mode (i tried few roms and radios, most recently radio 2.06.51.07 with HTC_WWE_1.66.405.2 rom)
It would install correctly and even boot the Win Mobile, but once restarted it wouldn't boot again and would get stuck on a blank white screen. Also the HSPL is still shown on the boot loader screen.
when I repeated the process and installed both radio and rom again, the same thing would repeat and I'm stuck on blank screen again.
My boot loader screen shows this:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
cotulla HSPL 0x40
The phone was from UK Virgin mobile, but came unbranded and I'm not sure what the stock rom was. I tried flashing it with SPL 2.08, but that wouldn't get me rid off the HSPL.
Any help will be greatly appreciated!
Thanks!
Get hspl2, and choose 1.66.0000
Retry the wwe 1.66 rom again.
Post results.
Spl 2.x is tmous spl, and doesn't like to let itself downgrade, which is what the 1.66 rom is trying to do.
thanks for the reply!
Just tried and it went without any error logs (only took couple of seconds) and claimed it was successfully installed, but when restarted, the boot loader screen still says SPL-2.08 HSPL.
any other ideas?
stuck radio then, most likely, which often prevemts spl from changing too.
no definitive answer as to what exactly causes it, , corrupted nand most likely.
when you say it sticks part way thru the flashing, , does it stick around 8-10%? if so then its definitely a stuck radio problem. do you get 'radio_rsa fail' or something similar?
sadly there isn't any way i know of to fix it. all i can suggest is you try various troms from sd. i read one thread (out of hundreds with teh same issue) where the OP finally found one stock rom that took.
dont forget that it needs to be teh correct stock rom, not just any stock rom. so an O2 uk hd2 must use o2 uk stock roms. 1.42, 1.72 or 3.14.
locate your correct stock roms and try them all.
Yea exactly thats what I get when flashing from SD card, stuck soon at around 10% and brings up the radio fail log.
When I do that and try to flash them all from SD card, shall I install radio first or it doesn't matter when flashing ROM from SD card?
Any idea how to find out what's the stock rom for my hd2? I tried HTC site but you can't download anything from there for HD2 since they updated their site.
Also, shall the SD card be formated with ext3 system partition on it (the android setup) or just use an empty FAT32 formatted card?
Vipo said:
Yea exactly thats what I get when flashing from SD card, stuck soon at around 10% and brings up the radio fail log.
When I do that and try to flash them all from SD card, shall I install radio first or it doesn't matter when flashing ROM from SD card?
Click to expand...
Click to collapse
doesnt matter when flashing stock roms, they all imclude a radio. It cant hurt to try flashing teh radio separately, but i suspect teh same outcome.
Any idea how to find out what's the stock rom for my hd2? I tried HTC site but you can't download anything from there for HD2 since they updated their site.
Click to expand...
Click to collapse
pretty sure virgin phones came rom unlocked, so look at teh filenames of teh roms, , you want 'HTC-WWE' where HTC means unbranded, and wwe means world wide english.
example
o2 branded rom filename .. RUU_Leo_S_O2_UK_3.14.206.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
unbranded rom filename ... RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
ALso, see the green numbers? thats the same for all same roms, so all o2 roms are 206 and all unbranded wwe are 405
Also, shall the SD card be formated with ext3 system partition on it (the android setup) or just use an empty FAT32 formatted card?
Click to expand...
Click to collapse
shouldnt matter, but again it cant hurt to fully format the phone to fat32, full format, not quick format.
Thanks for your help man! Will try and post results later.
Vipo said:
When I tried to flash my phone directly from SD card with renamed .nbh file, it would always get stuck at some point of installation and would leave me with phone that wouldn't boot, neither Android nor Windows.
Click to expand...
Click to collapse
Thats because you are not booting into the right bootloader. See pt 4 below.
No need for all the hassle, there is a really easy way to do this. This will revert your phone ENTIRELY. Remember to have at least 50% battery before doing this:
1.Download official ROM and extract with winRAR or WinZip.
2.Rename the *.nbh file to LEOIMG.nbh
3.Format a SD card with FAT32 and put the LEOIMG.nbh file in the root directory
4.Insert the card to the phone and enter bootloader (While phone is Off:Hold Volume down & press power button)
5. The bootloader will recognize the .nbh file and ask if you want to flash it. Follow instructions
6.Wait a few minutes and you are back to WM6.5
Tried, doesnt work. Explained in the first post.
why are you sending it for repair in the first place?
I dropped it once and since then has the screen got some weird yellowish/greenish colours. seems like some contacts got fu**ed up, but there isnt any mechanical damage visible, so they should repair under the warranty.
But only if in bootloader the spl says 1.42.0000 1.66.0000 or 3.03.0000
Anything else will be rejected.
What you mean by 'not the right boot loader'. I did get it to start installation and recognise the file, but after a while it would come up with a error log saying something like radio failed or something like that...
Yea I know, thats why Im trying to put it back to stock.
what size sd card are you flashing the .nbh file from? you will need to use a 4gb or smaller sd card.
what he meant by the right bootloader i think was to be flashing the .nbh from the tri-color bootloader, not from MAGLDR or CWM Recovery.
If you are using a 4gb or smaller card and it's still failing at the radio, then you might as well try flashing a few different radio's by themselves and maybe you'll get one of them to take, then possibly be able to get out of HSPL
well yea, thats what will be trying to do next.
it wont let me to MAGLDR or CWM, seems like these files got corrupted too so yea, im using the tri-color bootloader.
and its 2GB sd card im using
so i guess the only way now is to try flash different roms...
dude 2-3 days back even i was facing the same problem, and here i am writing , how i get through this. i guess you already tried this, but still i am writing so that you get some help...
1)i use hspl2 and select 1.42.0000 to remove my hspl 2.08.
2)extract stock rom using "7-zip" and in the extracted folder find "RUU_signed.nbh" rename it to "LEOIMG.nbh". copy that file to your formated fat32 micro sd card.
3) reset the your hd2 while holding vol down and end call button.
4) first a tri-color screen will appear, keep pressing both the buttons, then a gray screen will come with written "loading".
5) after that 1 more gray screen will appear, loose the vol down button now, rest everything will go smooth, u dont have to do anything.
meet.rajiv15 said:
dude 2-3 days back even i was facing the same problem, and here i am writing , how i get through this. i guess you already tried this, but still i am writing so that you get some help...
1)i use hspl2 and select 1.42.0000 to remove my hspl 2.08.
2)extract stock rom using "7-zip" and in the extracted folder find "RUU_signed.nbh" rename it to "LEOIMG.nbh". copy that file to your formated fat32 micro sd card.
3) reset the your hd2 while holding vol down and end call button.
4) first a tri-color screen will appear, keep pressing both the buttons, then a gray screen will come with written "loading".
5) after that 1 more gray screen will appear, loose the vol down button now, rest everything will go smooth, u dont have to do anything.
Click to expand...
Click to collapse
but if you return to hspl 1.42.000 the you cant flash your rom ..you need hspl 2.08 only to flash
Thanks zaaaan but I got bit luckier and virgin replaced the phone for no extra charge. I was 2 weeks before the end of the contract and I gave it a shot, sent it to virgin. They got back to me saying that they cant repair it and will therefore send me a replacement phone. I got new desire, bit smaller, but android on it runs really nicely and most of all its built for it, so no more flashing and killed hours of running in circles.
then I got 20£ discount just to stay with them on no contract. they got me
should probably add that the phone still had hspl on it