Hello all. Last night i flashed both my and my girlfriends t mobile branded hd2's to android 2.2 using magldr and a DFT android rom. Since then her 3g service randomly starts and stops as well as both of our devices have lost the ability to be read on a pc. I want to restore her device to the stock t mobile rom but the rom i downloaded from their website ends up stating that there is a usb error. Could someone please help me. Much appreciated.
I did some searching around and came across this: http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
Which was off of this page, which is most likely what you installed on your HD2s (NAND android correct?) http://www.jayceooi.com/2010/12/31/how-to-install-nand-android-on-htc-hd2/
BTW, which radio version are you running? It seems that your builds want the 2.15 radio.
thank you so much for replying, this is the nand android that i flashed with but i cannot for the life of me find an official tmobile rom that will work with magldr to reflash her phone. O and how do i go about finding out the radio version???
Bear with me since I've never NANDandroid'd my HD2's, only have run them from my SD cards. My understanding is that magldr can be removed by just reinstalling another flash, like Tmo's 3.14 or 2.13.
Is this the exact NAND you installed? http://forum.xda-developers.com/showthread.php?t=893620 It says "Uninstallation:
It is possible to downgrade to original Windows Mobile 6.5, by just flashing to an Official ROM.
Both MAGLDR and Android will be removed"
My bet is that you'll have to do the SD card method of reflashing:
Remove your sim card, then
Download a stock rom, unpack it, and...
.
1. Place the LEOIMG.nbh on a 8GB or smaller microSD card.
2. Remove the battery cover and press the Reset button.
3. Hold the Volume Down and End Call (power) buttons at the same time.
4. As soon as "Searching..." appears on the screen, release the Volume Down button.
5. ROM will flash. Be sure to hard-reset afterwards to prevent weird errors (as usual). (credits to snarksneeze)
To find your radio version, check in android's about phone section in the settings menu. I don't know of any other way other than maybe the bootloader screen (3 colors, red, green blue), might list it (volume down and power button).
japookie said:
thank you so much for replying, this is the nand android that i flashed with but i cannot for the life of me find an official tmobile rom that will work with magldr to reflash her phone. O and how do i go about finding out the radio version???
Click to expand...
Click to collapse
Ok the closest thing that i have found online is a custom rom called "Kumar's Leo Touch Prem V3.0 S23142-WWE.nbh". Now i am completely lost after the step that states Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
ok i tried renaming the rom and copying it to the sd card but when i try to reboot by holding the power key and the down volume rocker the phone just continually vibrates and never restarts. When i try a regular reboot by holding the power button i can either go back into android or pull up magldr but not flashing options for winmo
Wait a minute...don't use that Kumar's ROM, it's for the Euro HD2 (512MB) --it'll probably brick your US TMO HD2 (1024 MB).
Ok, find a TMO USA nbh file, then rename it to LEOIMG.nbh, then copy it to the the microSD card with a card reader. Next, put the microSD card back in the phone and remove the SIM card (some folks say it's better to flash without the SIM card in).
Make sure before you flash that your battery level is more than 50%! Enter the bootloader by doing the following:
To place the HD2 into Bootloader mode,
1. Place the LEOIMG.nbh on a 8GB or smaller microSD card.
2. Remove the battery cover and press the Reset button.
3. Hold the Volume Down and End Call (power) buttons at the same time.
4. As soon as "Searching..." appears on the screen, release the Volume Down button.
5. ROM will flash. Be sure to hard-reset afterwards to prevent weird errors (as usual). (credits to snarksneeze)
japookie said:
Ok the closest thing that i have found online is a custom rom called "Kumar's Leo Touch Prem V3.0 S23142-WWE.nbh". Now i am completely lost after the step that states Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
Click to expand...
Click to collapse
WOW thanks a million before i bricked the phone, the closest thing to a t mo nbh file that i have found so far is what i am assuming is a rom labeled "T-Mobile_HD2_MR_Software_3.14.531.1.exe". I will continue scouring the net until i find something and again THANKS A MILLION
Ok here's the thread that'll save your day:
http://forum.xda-developers.com/showthread.php?t=681317
at the end of the first post is a ROM for you. Copy that to the microSD card and go from there, following the instructions. I forgot since it's been a while since I've done it that you need an 8gb or smaller microSD card, the 16gb one doesn't seem to work for flashing.
Here's your 2.10 stock TMO USA rom, http://devftp.xda-developers.com/files/zelendel/LEOIMG.nbh after you get this installed, perhaps your USB connectivity will be back and you'll be able to later update to 3.14 if you so choose (http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2) or 2.13 (http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo)
1. Place the LEOIMG.nbh on a 8GB or smaller microSD card.
2. Remove the battery cover and press the Reset button.
3. Hold the Volume Down and End Call (power) buttons at the same time.
4. As soon as "Searching..." appears on the screen, release the Volume Down button.
5. ROM will flash. Be sure to hard-reset afterwards to prevent weird errors (as usual). (credits to snarksneeze)
japookie said:
WOW thanks a million before i bricked the phone, the closest thing to a t mo nbh file that i have found so far is what i am assuming is a rom labeled "T-Mobile_HD2_MR_Software_3.14.531.1.exe". I will continue scouring the net until i find something and again THANKS A MILLION
Click to expand...
Click to collapse
Download that .exe you where talking about and extract it to gain the .NBH file you need.
You know what's wierd is I used to be able to extract/decompress that .exe file! Now I can't, I figured I probably uninstalled the program that does that on my computer. Anyway, I was going to recommend to the OP to do that except that he might not have the program to decompress that .exe as well, so I figured I'd make it a little easier for him by suggesting he download just the .nbh file from the forums.
Related
Sorry for the double post but my other one is on page 94 of a different thread and probally wont get seen and i am now getting desperate,anyway
I have just followed the procedure as I was going to install a different ROM from ★ Miri & DINIK "Anastasia" ROM to replace my installed ROM from ENERGY
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
First I did a task 29 and now I am now stuck in the bootloader screen with its tri colour screen with USB in the white part,if I have the cable connected or Serial if the cable is removed.
I have tried a few times but it still stays on the boot screen.I am running windows 7 32 bit on my laptop and have tried all 3 different USB ports with the same result.
How do I get the phone back working?
Thanks
Your Phone is stuck in the bootscreen because you have removed the operating system with the task29. so this is normal.
make sure you have transferred the leoimg.nbh to the storage card and disconnect the phone from the cable. reboot the phone and flashing should start automatically. if it does not
now connect your phone to the computer and you will see the screen change from serial to usb
just follow the procedure as described in on the forum to flash from a computer. you do not need to be connected to activesync to do this as the phone is already in bootloader mode. just start the flashing program as described.
Thanks for that,I did realise thats the reason its stuck in the bootloader.I have connected the phone back to the computer a few times and waited untill the USB came onto the screen but the divice does not show up in "My Computer" and when I try to restore the ROM I get a 260 connection error.
I think I have just sorted the problem,not sure the reason but it was failing on a 16GB fat32 card. I have just borrowed a 2GB card from a friend put exactly the same image on and it is now updating the ROM.
Thats strange how the card has made that much of a difference,but thanks anyway.
I'll let you know how the update goes in a few minutes when it completes.
Thanks
many people have said the same thing. 16 doesn't work, 8 sometimes works, 2 usually works.
Up and running great now,,Looks like i'll have to invest in a small 2GB card as a back up,
Thanks again
Stuck also in bootloader
wilcovh said:
Your Phone is stuck in the bootscreen because you have removed the operating system with the task29. so this is normal.
make sure you have transferred the leoimg.nbh to the storage card and disconnect the phone from the cable. reboot the phone and flashing should start automatically. if it does not
now connect your phone to the computer and you will see the screen change from serial to usb
just follow the procedure as described in on the forum to flash from a computer. you do not need to be connected to activesync to do this as the phone is already in bootloader mode. just start the flashing program as described.
Click to expand...
Click to collapse
I flashed my HTC Leo to Dutty Multi-lang, when finished and reboot it won't and gets stuck in the "stick together" bootloader (yes, I am with TMOUS). I did what you suggested but it still won't boot, please help!
paulzhang07 said:
I flashed my HTC Leo to Dutty Multi-lang, when finished and reboot it won't and gets stuck in the "stick together" bootloader (yes, I am with TMOUS). I did what you suggested but it still won't boot, please help!
Click to expand...
Click to collapse
is the multi lang one the one with the base 3.04 rom? that 3.04 base isn't from tmous, have you confirmed it is tmous compatible? (i dont know enough about teh 3.04 rom)
samsamuel said:
is the multi lang one the one with the base 3.04 rom? that 3.04 base isn't from tmous, have you confirmed it is tmous compatible? (i dont know enough about teh 3.04 rom)
Click to expand...
Click to collapse
It is 3.28.4.0
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
samsamuel said:
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
Click to expand...
Click to collapse
And how would you do that if the darn phone won't boot? I can copy a known ROM onto the card, but then how do I flash it from there? Thanks.
paulzhang07 said:
And how would you do that if the darn phone won't boot? I can copy a known ROM onto the card, but then how do I flash it from there? Thanks.
Click to expand...
Click to collapse
no need for sd card,,,boot into boot loader, connect usb, run your flash.
samsamuel said:
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
Click to expand...
Click to collapse
Problem resolved... not sure what caused it but I am a happy man now. This is what I did if this helps with people who might have the same problem.
1. Formated the SD card FAT32.
2. Copy and rename nbh file to LEOIMG.nbh to SD card.
3. Reset the phone while holding the down button. It jumps to bootloader.
4. Hook it with PC, USB is shown on the phone.
5. Download and extract SSPL_RUU.exe and RUU_signed.nbh from Dutty Cream la de Cream ROM into the same folder.
6. Run SSPL_RUU and it came up and running again.
Thanks for your help though, made me feel hopeful because I was getting ready to dump the phone and run over it with my car
no worries, just for info, step two was not needed, it would have tried to flash leoimg at step three if you hadn't been using the stock gig sd card (the 16gb cards don't work, which is why the phone ignored it.)
paulzhang07 said:
Problem resolved... not sure what caused it but I am a happy man now. This is what I did if this helps with people who might have the same problem.
1. Formated the SD card FAT32.
2. Copy and rename nbh file to LEOIMG.nbh to SD card.
3. Reset the phone while holding the down button. It jumps to bootloader.
4. Hook it with PC, USB is shown on the phone.
5. Download and extract SSPL_RUU.exe and RUU_signed.nbh from Dutty Cream la de Cream ROM into the same folder.
6. Run SSPL_RUU and it came up and running again.
Thanks for your help though, made me feel hopeful because I was getting ready to dump the phone and run over it with my car
Click to expand...
Click to collapse
Thanks I did these steps a million times and now Im still in the bootloader screen. What else can I do? Thanks for the help.
im also still with hang with that problem.even tried jteg.but wont successful .bc of i tried to restore from win7 to 6.5. now still set is dead from long time
Hey guys, Im not new to this flashing thing so Im ata complete loss as to what Im doing wrong.
Im running magldr v1.13 w/ CWM and a MyTouch 4G installed. I need to go back to Tmo WM6.5 so I can return the phone under warranty. I have read the guides over and over and I have no idea what Im doing wrong.
I have tried 3 separate computers XP, Vista, and Win7 and 2 cables, however when on the bootloader screen I never get the "USB" at the bottom when plugged in. I can select USB flasher and it connects to the computer, same with USB MassStg.
I really appreciate any advise here....
just flash via sd card.
from mskip's guide:
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
worked, thank you!
Can someone point me to where I can find the stock rom for my USA T-mobile HD2? (link maybe??) I have been unable to find where to download it.
I also tried going to HTC.com and I couldn't find it there either.
What happened was that I had the Android 2.2 nand on it and now the touch screen has stopped working. The physical buttons work fine. I tried to reinstall android but it failed and now it won't boot into android. I would like to bring it back to factory Windows Mobile and if the touch screen still does not respond, then see if I can take it back to T-mobile.
jimvsmij said:
Can someone point me to where I can find the stock rom for my USA T-mobile HD2? (link maybe??) I have been unable to find where to download it.
I also tried going to HTC.com and I couldn't find it there either.
What happened was that I had the Android 2.2 nand on it and now the touch screen has stopped working. The physical buttons work fine. I tried to reinstall android but it failed and now it won't boot into android. I would like to bring it back to factory Windows Mobile and if the touch screen still does not respond, then see if I can take it back to T-mobile.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=577717
And how to return phone to stock..
http://www.youtube.com/watch?v=vPeuNLzqnJg
Ok basically my phones completely Bricked.
It turns on and shows the HTC Logo and then sits there and does nothing.
I can get the phone into the Rainbow Bootloader however then it won't connect to my computer.
Im pretty sure the phone originally had Android 2.2 however that's all messed up and gone.
Is there a way to completely wipe and then reinstall Android or even the Original WM 6.5?
Im stuck here guys. The phone is a USA T-Mobile Leo.
Cheers
no your phoine is not bricked, if it was bricked it wouldnt even turn on
so you boot intothe boot loader plug inthe usb cable and does it change from serial to usb?
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
joooe said:
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
Click to expand...
Click to collapse
It should be an official rom, shouldn't it ?
kawazaki said:
It should be an official rom, shouldn't it ?
Click to expand...
Click to collapse
Probably yes. Sorry, then.
Either way, he can still download the official rom .exe file and uncompress it with winzip or winrar. After that, he should find the .nbh file and rename it to "leoimg.nbh" and put it in the sd root.
Hi there,
Yes i have downloaded the Official ROM from T-Mobile.com and entered my IMEI, so i suspect its the correct one.
Tried updating from the Computer and it got to 5% and then said Update Failed.
I also tried doing it from the SD Card the way you guys said to, it worked once, it got to about 3% and said something about Invalid Radio.
I'm guessing this should have worked, however it didn't
Any idea why??
Cheers for your help Guys
PS: When i load into BootLoader mode it does come with with Serial and then USB.
However it also now since the update failed comes up with 'Upgrade ROM Code Error, Please Try Again "
I Get Error Code 284 on the update utility
Cheers
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
pandollar said:
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
Click to expand...
Click to collapse
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
willymanilly said:
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
Click to expand...
Click to collapse
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
T-Macgnolia said:
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
Click to expand...
Click to collapse
ATM My SPL is 2.9
I think it may be corrupt, i took my phone into a phone repair shop and they had no idea how to fix it either.
So does anybody have some detailed instructions on how to do this, id love to get it going!
Cheers
It has to be the radio. If I'm not mistaken you flash the radio just like a ROM.
Here a thread with alot of Radios. Look for the one that says 2.15.50.14 Radio or something similar theres instructions in the thread.
THREAD: [RADIO] The HTC HD2 Master Radio Thread
Good luck!
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
happyhallsy8 said:
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
Click to expand...
Click to collapse
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
T-Macgnolia said:
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
Click to expand...
Click to collapse
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
willymanilly said:
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
Click to expand...
Click to collapse
Ok are you sure you have SPL 2.09 on your HD2 cause it should be one of these?
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
If you have that SPL you might have to flash a older ROM to get another SPL version that will let you flash HSPL as SPL 2.09 will not and I have not heaerd of that SPL so it must have been like a test SPL or something.
Go to "Leo 1.5 T-MOBILE Test & Stock ROMS"and start at the 2,07 ROM, download it and try to flash it via USB and SD card. If no joy, move to 2.09 ROM, if now joy with it move to 2.10.0 ROM and so on and so on until you get one to flash. try both flash methods with both.
Do not, I repeat do not flash or even download for that matter the 2.01 ROM marked not for TMOUS as it will brick/KILL your your HD2!
Recommendations from the SD flash your machine
This is the second time this has happened to me, very sad since it's only been 5 months since they fixed it last :/ just need to go through the process to reinstall HSPL original and WM 6.5. basically I need to re factory-ize it haha anybody able to take me through the whole process?
I believe I need to go to *THIS* thread and download the World Wide English (WWE) 3.14.405.2 since I'm T-Mobile.
Now, I believe *NEXT STEP?* is to install HSPL but what one do I select?? Also my Radio was not what it is now, will that make a difference to them?
If you're sending it in for repair, you won't want to use HSPL. Just install the correct stock ROM for your device (TMOUS, Telestra, etc.) using the sd card method. Download the CORRECT rom and extract it onto your computer desktop. Take the file ruu_signed.nbh and rename it to LEO_IMG.nbh and place this file on an sd card that is 4gb or less. Get the phone into bootloader by holding the volume down (vol -) button while powering up the device. If you do not let go of the volume button, you should end up in the bootloader screen. Then the phone will search the sd card and find the leo_img.nbh file and prompt you to press a certain button to install it. Press that button, and when it's done, you have stock rom and spl, your phone is ready to ship off for repair.
If you for some reason can't use the sd method or prefer not to, just download HSPL4, run it with your phone properly connected, and choose 2.08 not 2.08HSPL.
The radio doesn't matter, its ok that you have a different one now.
alright, cool because I had read somewhere that the Cotulla HSPL would get rid of warranty if seen..
huggs said:
If you're sending it in for repair, you won't want to use HSPL. Just install the correct stock ROM for your device (TMOUS, Telestra, etc.) using the sd card method. Download the CORRECT rom and extract it onto your computer desktop. Take the file ruu_signed.nbh and rename it to LEO_IMG.nbh and place this file on an sd card that is 4gb or less. Get the phone into bootloader by holding the volume down (vol -) button while powering up the device. If you do not let go of the volume button, you should end up in the bootloader screen. Then the phone will search the sd card and find the leo_img.nbh file and prompt you to press a certain button to install it. Press that button, and when it's done, you have stock rom and spl, your phone is ready to ship off for repair.
If you for some reason can't use the sd method or prefer not to, just download HSPL4, run it with your phone properly connected, and choose 2.08 not 2.08HSPL.
The radio doesn't matter, its ok that you have a different one now.
Click to expand...
Click to collapse
The link I have isn't showing a .nbh file rather a .exe of the official ROM
harrystone33 said:
The link I have isn't showing a .nbh file rather a .exe of the official ROM
Click to expand...
Click to collapse
Hi,
You need to revert back to orginal... HSPL is a hack and your warranty is void.
Extract with winrar or 7z the RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe
find the larger *.nbh file and rename it to leoimg.nbh
copy it to your SDcard and reboot to bootloader (the one with 4 colors,hold volume down button)
follow the instructions from there
That way you will have your original software with SPL restored and ready to send it for repair
No need for PC drivers etc.
so I need *RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe this one? and not the WWE version
harrystone33 said:
so I need *RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe this one? and not the WWE version
Click to expand...
Click to collapse
Hi,
Sorry,that appears to be Netherland one
You want the one that is local to you.
Check HTC site and choose the one for your area.
The one I gave was just an example of how to extract.
EDIT:
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone.
That's what I should have put in the first place.
malybru said:
EDIT:
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone.
That's what I should have put in the first place.
Click to expand...
Click to collapse
it does not have an upgrade it says when I look for my version?
T-Mobile US under Downloads correct? this is stating to be a hassle ><
harrystone33 said:
it does not have an upgrade it says when I look for my version?
T-Mobile US under Downloads correct? this is stating to be a hassle ><
Click to expand...
Click to collapse
Hi,
I just followed my own instructions(Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone)
and found the ROM for my phone,downloaded,extracted,etc.
So it does work.
Judging from your avatar,I would say TMOUS is what you need.
Nothing there for T-mobile that I see on HTC website, did a search on T-Mobile's and found one there.. I should have looked there first I suppose.. sorry haha thanks for the help
Got error messages for the way I used instructions "Note: This update is not intended for use on T-Mobile(US) HTC HD2, and doing so may have undesired side effects."
huggs said:
If you're sending it in for repair, you won't want to use HSPL. Just install the correct stock ROM for your device (TMOUS, Telestra, etc.) using the sd card method. Download the CORRECT rom and extract it onto your computer desktop. Take the file ruu_signed.nbh and rename it to LEO_IMG.nbh and place this file on an sd card that is 4gb or less. Get the phone into bootloader by holding the volume down (vol -) button while powering up the device. If you do not let go of the volume button, you should end up in the bootloader screen. Then the phone will search the sd card and find the leo_img.nbh file and prompt you to press a certain button to install it. Press that button, and when it's done, you have stock rom and spl, your phone is ready to ship off for repair.
If you for some reason can't use the sd method or prefer not to, just download HSPL4, run it with your phone properly connected, and choose 2.08 not 2.08HSPL.
The radio doesn't matter, its ok that you have a different one now.
Click to expand...
Click to collapse
it MUST be less than 4GB? I just have the 16 GB that came with mine..
Hi,
Weird.I checked HTC US site and there are no stock ROMS for download.
Maybe this can help:
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
http://www.megaupload.com/?d=8XZMKWBZ
malybru said:
Hi,
Weird.I checked HTC US site and there are no stock ROMS for download.
Maybe this can help:
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
http://www.megaupload.com/?d=8XZMKWBZ
Click to expand...
Click to collapse
it would, but Im not on WM6.5, still android, so Activesync is not through android OS and the touchscreen is not working so I can only plug in my USB through MAGLDR menu.
and.. it's happened yet again!
this is such a hassle.. I'm stuck as I forgot how I had put it back to original since this post.. lol my HTC ROM update is stuck at 0% when I'm using 3.03 SPL
and when I use 2.08 SPL the original WMO does not even load up after saying it has been installed...
So i was trying to put android with easy android and it seemed like it worked, it said we hacked it at the end. Now the phone doesnt boot up. I even tried hard resetting any help? Do i need to flash a radio? If so how and which radio?
Full filename of anything you flashed plus tmous or regular? What does "wont boot up" mean?
Details details details.
Im tmobile US. Theres an application that does an automated process. It's called Easy Android. I dont have the link for the post but it's hear on xda. When the phone boots up it just shows the T-mobile logo.
Please tell me if you need more info.
oh right, well in taht case its almost certainly either the wrong hspl or the wrong radio.
Magldr wont start unless BOTH spl is 2.08.hspl and radio is 2.07.50 or higher , but since you have a tmous the radio must be OK, so it must be the spl
enter bootloader (phone off, hold hold keep holding voldown, tap and release power, hold voldown till tri colour screen appears) what does spl line say?
Hey
Its 2.08 HSPL
BTW i appreciate the help
in that case i'd be heading back to a stock rom, get it back to as-new and start over.
Grab either the 2.13 or 3.14 TMOUS roms and flash via sd card. that will put it back to as new, then apply 2.08.hspl - magldr - cwm - rom.(get the toolkit)
I wont have a problem finding the rom, but i just need to know how do you flash the rom, do you just enter bootloader and it auto installs?
Thanks
get the phone into bootloader mode, and make sure the computer detects the phone before you start the flashing process (i.e. running the RUU).
If the rom comes in an exe file, rename it and make the file extension .zip
Then go into the .zip file and remove the file which has the file extension .nbh
Rename this file to LEOIMG.nbh
Put this file at the root of a 4Gb or smaller sd card
Put the card into your phone and boot into bootloader (hold vol down button while booting)
Should find and flash the rom all by its self, might ask you to press a certain button to confirm, been a long time, I can't remember for sure if you have to press a confirmation button
Wait for it top finish
Make sure you have 50% or greater battery before you flash
MAKE SURE you have the correct stock rom for your phone. There are different stock roms for different HD2's depending on what model HD2 you have. Flash the wrong one you could be screwed for good
Okay, running RUU while in bootloader worked perfect.
Got the ruu straight from tmobile.
Windows 7 auto installed bootloader drivers for me.