Related
hi sir iam new in this forum plz help me my htc hd2 shows on screen software update failed it cannot connected to active sync but connected to my pc .i download its hspl and rom butt next what can i do plz help me.
Try to get it into bootloader by taking out your battery, putting it back in, and then holding the volume down button while pressing the pwr/end key.
You have to hold the vol- key while the phone starts up, then you should see a screen with a few colores bars and some info.
EXACTLY what all info is displayed in your tri-color (bootloader) screen?
i tried the same. phone is in boot loader mode butt cannot connect to hspl2 it gives error plz help me .what can i do next its spl is 2.08.0000 8G XE
Don't bother trying to flash it via ActiveSync or Windows Mobile Device Center on your computer. If it has already failed, it will likely fail again.
Get a class 2, 4gb sd card, and erase all files and format it (FAT32).
Get a ROM that you are CERTAIN is compatible with your 1024 Leo (TMo-US) and inside the zip file you will find a file with the extension .nbh
Rename it to LEOIMG.nbh and transfer the file to your freshly formatted 4gb class2 card. (Not inside any folders, just on the card)
Take the battery out of your phone, then place the sd card into the phone.
Turn the phone on while holding the vol- button, to enter bootloader, and your phone will detect the LEOIMG.nbh file after a few seconds and ask you if you want to update your software.
Your phone will tell you to press a button to start the update. Press the button. Wait for the update to complete. The phone may reboot and flash the update again, I've had mine do that, it's okay, just let it go.
When everything is done, it should either turn off by its self, or boot up normally by its self.
If the update fails the first time, try it again.
Turn it off, take out the sd card, and boot it up normally.
If you follow these steps exactly, then you will not fail.
If you do follow thes steps exactly and the phone doesn't get all the way thru the update process, and fails, then it's one of two things:
1. You tried to flash an incompatible ROM
2. There's something wrong with the hardware of your phone, or your bootloader is corrupted.
Good luck and happy flashing!!!!!
bro thank u for give me complete detail for that butt i am confused that where i find compatibale rom.plz if u up load for me that rom and if possible how to find the file LEOIMG.nbh.plz sorry for my bad english. my phone spl is 2.08.000.and also that software windows Mobile Device Center.
usmancheema said:
bro thank u for give me complete detail for that butt i am confused that where i find compatibale rom.plz if u up load for me that rom and if possible how to find the file LEOIMG.nbh.plz sorry for my bad english. my phone spl is 2.08.000.and also that software windows Mobile Device Center.
Click to expand...
Click to collapse
OK since your SPL is 2.08, you will first need to install HSPL to your phone through your computer.
Don't worry, HSPL never fails over the computer , as ROMs sometimes do.
http://forum.xda-developers.com/attachment.php?attachmentid=347299&d=1277158888
Just connect your phone through Windows Mobile Device Center and run the HSPL program (right-click it and Run As Administrator), following the instructions the program gives you. When asked to choose an SPL, choose 2.08 HSPL.
Allow the program to work its magic, and when it is finished, go into bootloader and confirm manually that you have HSPL by looking on the bootloader screen for the name Cotulla, and it should say 2.08HSPL
Then I would suggest any of the ROMs here:
http://hotfile.com/list/588162/580b43d
Personally I would go with the Dinik one, the icons and everything are really nice looking.
Just follow my previous instructions to flash it via sd card, and you'll be good to go.
After that, go learn about putting some Android builds on your sd card in the HD2 forum, Android subfora.
Lots of fun to be had there.
Hope it all works well for you, don't hesitate to ask more ?'s if you're not sure about something
I have looked all around this forum, google, and youtube. my phone is running on cyanogen 6.1 via nand. I would like to go back to winmo so i can send it back to t mobile because the vibration stopped working. Tutorials, DL links will help.
From the Flashing NAND roms tutorial (link in my signature)
5. UNINSTALLING MAGLDR AND NAND ANDROID (FLASHING WINMO BACK TO NAND)
To uninstall Magldr and any Android Rom that you installed to NAND, do the following:
1. Download a Stock Rom from *HERE* or a Custom Rom from the HD2 Rom Development Forum (for LEO512 ONLY, LEO1024 users will have to use a TMOUS compatable Stock or Custom Rom that is LEO1024 compatable).
2. Enter Bootloader Mode by taking the battery out, then put it back in and hold down the 'Volume Down' button while briefly pressing the power button.
3. After the phone enters the Bootloader Screen, plug in the usb cable so it says usb at the bottom of the screen
4. Run the Stock Roms .exe file (or run the customruu.exe file of the Custom Rom you want to flash)
* This will flash a Stock Rom and Radio while keeping your HardSPL untouched *
Click to expand...
Click to collapse
i think i love you
Yea but that will not remove the HSPL. If you have the latest HSPL you need to open it back up after you load the stock rom and then install the one that is 2.08.0000 at the end of it. Now they will have no Idea. As for the stock rom I just downloaded the one from T-mobile. (www.t-mobile.com/wmupgrade)
Then press the "Thanks" button for him to boost his meter.
i download the stock rom and then how do i do it? im usually an apple guy, im new to android.
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
I am trying todo this on my hd2, to get it back to "stock" wm6.5.
I am having some problems with this. I can get into the bootloader and from my pc initiate the flash. But then it just hangs at 0%.
Anyone got any ideas to what i can do to get it back to "stock" wm6.5 from Android?
Do you still have hspl installed? Are you using the orignal stock rom for your device? Try putting device into bootloader mode first and then connect to your pc, does usb appear on the phone screen when connected?
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
If you're having problems running the flasher executable, try the method mentioned by LiFE1688 above.
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
zatoor said:
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
Click to expand...
Click to collapse
Do you have spl 2.08.0000 or 2.08.hspl installed? You need the latter one if you are flashing a rom which is not officially meant for your phone.
That did the trick. Thank you very much.
zatoor said:
That did the trick. Thank you very much.
Click to expand...
Click to collapse
+1 Thank you!
I tried to reinstall it & my phone turned off. Now it won't reboot. I think it's broken now. Any suggestions?
You will also have to remove HSPL as it is a customized Special Program Loader. Just flash using the .nbh files and that should overwrite the HSPL with the stock SPL. If you use Customruu directly (without modifications) it will not replace the HSPL.
you have to make sure to use a 2gb sd card or less or else it wont work
LiFE1688 said:
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
Click to expand...
Click to collapse
Will this process delete everything from the sd card? Im going to do this process to sell to someone on craigslist and i dont want anything (contacts, texts, pics, etc) to be able to be accessed or seen.
Thanks!
ClydeB1 said:
From the Flashing NAND roms tutorial (link in my signature)
Click to expand...
Click to collapse
I cant find that link,
can you please post it here.
Thank you in advance....
I have HTC HD2 wich I want to rollback to Win mobile, I have androind on it wright now.
Ok basically my phones completely Bricked.
It turns on and shows the HTC Logo and then sits there and does nothing.
I can get the phone into the Rainbow Bootloader however then it won't connect to my computer.
Im pretty sure the phone originally had Android 2.2 however that's all messed up and gone.
Is there a way to completely wipe and then reinstall Android or even the Original WM 6.5?
Im stuck here guys. The phone is a USA T-Mobile Leo.
Cheers
no your phoine is not bricked, if it was bricked it wouldnt even turn on
so you boot intothe boot loader plug inthe usb cable and does it change from serial to usb?
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
joooe said:
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
Click to expand...
Click to collapse
It should be an official rom, shouldn't it ?
kawazaki said:
It should be an official rom, shouldn't it ?
Click to expand...
Click to collapse
Probably yes. Sorry, then.
Either way, he can still download the official rom .exe file and uncompress it with winzip or winrar. After that, he should find the .nbh file and rename it to "leoimg.nbh" and put it in the sd root.
Hi there,
Yes i have downloaded the Official ROM from T-Mobile.com and entered my IMEI, so i suspect its the correct one.
Tried updating from the Computer and it got to 5% and then said Update Failed.
I also tried doing it from the SD Card the way you guys said to, it worked once, it got to about 3% and said something about Invalid Radio.
I'm guessing this should have worked, however it didn't
Any idea why??
Cheers for your help Guys
PS: When i load into BootLoader mode it does come with with Serial and then USB.
However it also now since the update failed comes up with 'Upgrade ROM Code Error, Please Try Again "
I Get Error Code 284 on the update utility
Cheers
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
pandollar said:
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
Click to expand...
Click to collapse
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
willymanilly said:
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
Click to expand...
Click to collapse
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
T-Macgnolia said:
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
Click to expand...
Click to collapse
ATM My SPL is 2.9
I think it may be corrupt, i took my phone into a phone repair shop and they had no idea how to fix it either.
So does anybody have some detailed instructions on how to do this, id love to get it going!
Cheers
It has to be the radio. If I'm not mistaken you flash the radio just like a ROM.
Here a thread with alot of Radios. Look for the one that says 2.15.50.14 Radio or something similar theres instructions in the thread.
THREAD: [RADIO] The HTC HD2 Master Radio Thread
Good luck!
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
happyhallsy8 said:
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
Click to expand...
Click to collapse
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
T-Macgnolia said:
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
Click to expand...
Click to collapse
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
willymanilly said:
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
Click to expand...
Click to collapse
Ok are you sure you have SPL 2.09 on your HD2 cause it should be one of these?
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
If you have that SPL you might have to flash a older ROM to get another SPL version that will let you flash HSPL as SPL 2.09 will not and I have not heaerd of that SPL so it must have been like a test SPL or something.
Go to "Leo 1.5 T-MOBILE Test & Stock ROMS"and start at the 2,07 ROM, download it and try to flash it via USB and SD card. If no joy, move to 2.09 ROM, if now joy with it move to 2.10.0 ROM and so on and so on until you get one to flash. try both flash methods with both.
Do not, I repeat do not flash or even download for that matter the 2.01 ROM marked not for TMOUS as it will brick/KILL your your HD2!
Recommendations from the SD flash your machine
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk
I have WP7 DFT on my HD2. can someone please tell me how i would go about returning to the stock rom. what programs would i need, i put WP7 on my phone then my computer got a virus so everything used to flash WP7 is gone and i dont know what i need to download to return to stock, i would like to remove EVERYTHING and get the phone back to how i bought it would you please help me you guys are amazing.
kingsjj912 said:
I have WP7 DFT on my HD2. can someone please tell me how i would go about returning to the stock rom. what programs would i need, i put WP7 on my phone then my computer got a virus so everything used to flash WP7 is gone and i dont know what i need to download to return to stock, i would like to remove EVERYTHING and get the phone back to how i bought it would you please help me you guys are amazing.
Click to expand...
Click to collapse
Download the last Windows Mobile 6.5 update on Tmobile websitehttp://www.t-mobile.com/wmupgrade/ (If US Model) or htc.com
Once downloaded to remove HSPL and return to truly stock extract the update file and copy the .nbh file(200MB+) to an SDCard and rename it to LEOIMG.nbh restart the phone into Bootloader and flash
To keep HSPL just run the exe file
THANK YOU SIR Im gonna try it but just in case could yuou do step by step
I downloaded the update from the website it doesnt seem to be able to be extracted, should i just follow the instructions, willl that brick my phone? lol IM SO CONFUSEDDDDDD
kingsjj912 said:
I downloaded the update from the website it doesnt seem to be able to be extracted, should i just follow the instructions, willl that brick my phone? lol IM SO CONFUSEDDDDDD
Click to expand...
Click to collapse
I'm typing up the step by step.... If you download the ROM make sure that its for your version of the HTC HD2..
If you simply put the phone in Bootloader Mode and Run the program its going to erase WP7, and MAGLDR and flash WM6.5 and leave HSPL (bad if your sending it in to the company)
kingsjj912 said:
THANK YOU SIR Im gonna try it but just in case could yuou do step by step
Click to expand...
Click to collapse
The steps are the same for both the US version of this phone and also the EU (international) version, the only real IMPORTANT step is the first on where you download the stock WM6.5 rom
1. for a Tmobile US HD2 ONLY(Green Call button, and Red End Key) visit the Tmobile WM6.5 upgrade page and download the ROM
http://www.t-mobile.com/wmupgrade/
1a. for the European or International version (grey key colors no Tmobile branding) go to this thread http://forum.xda-developers.com/showthread.php?t=623283 Pick the 3.14 ROM that suits your need (language).
2. Once you have downloaded the ROM you will have a .exe
"T-Mobile_HD2_MR_Software_3.14.531.1.exe" is the US HTC HD2
while the European (Internalional) will say depending on your language picked
"RUU_Leo_S_HTC_FRA_3.14.406.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
"
To Keep HSPL
3. Turn the phone on in Bootloader Mode and Start up the Update Program once completed it will restart and Boot WM6.5
Do note that it will take a while to turn on and Finish Booting WM6.5
________________________
TO REMOVE HSPL AND RETURN TO STOCK SPL
3a. Right click on the ROM (depending on the Archive Program) and choose to extract the contents of that package
4a. once extracted you want to put the "RUU_Signed.nbh" on a memorycard and rename it to LEOIMG.nbh..... (.nbh is the file extension dont make a file called LEOIMG.nbh.nbh)
5a. Once its copied over put the memory card in the phone and startup the phone in Bootloader Mode
6a. You will be asked if you would like to install the update by press the End KEY, go head and press it
7a. When it is done it will restart and which point you want to go into Bootloader Mode to check that "CotullaHSPL" is gone
If it is then your back to fully Stock
IF NOT then you must download HSPL3_PKG http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 and run it
Choose "2.08.0000" to return to stock
Tachi91 said:
The steps are the same for both the US version of this phone and also the EU (international) version, the only real IMPORTANT step is the first on where you download the stock WM6.5 rom
1. for a Tmobile US HD2 ONLY(Green Call button, and Red End Key) visit the Tmobile WM6.5 upgrade page and download the ROM
http://www.t-mobile.com/wmupgrade/
1a. for the European or International version (grey key colors no Tmobile branding) go to this thread http://forum.xda-developers.com/showthread.php?t=623283 Pick the 3.14 ROM that suits your need (language).
2. Once you have downloaded the ROM you will have a .exe
"T-Mobile_HD2_MR_Software_3.14.531.1.exe" is the US HTC HD2
while the European (Internalional) will say depending on your language picked
"RUU_Leo_S_HTC_FRA_3.14.406.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
"
To Keep HSPL
3. Turn the phone on in Bootloader Mode and Start up the Update Program once completed it will restart and Boot WM6.5
Do note that it will take a while to turn on and Finish Booting WM6.5
________________________
TO REMOVE HSPL AND RETURN TO STOCK SPL
3a. Right click on the ROM (depending on the Archive Program) and choose to extract the contents of that package
4a. once extracted you want to put the "RUU_Signed.nbh" on a memorycard and rename it to LEOIMG.nbh..... (.nbh is the file extension dont make a file called LEOIMG.nbh.nbh)
5a. Once its copied over put the memory card in the phone and startup the phone in Bootloader Mode
6a. You will be asked if you would like to install the update by press the End KEY, go head and press it
7a. When it is done it will restart and which point you want to go into Bootloader Mode to check that "CotullaHSPL" is gone
If it is then your back to fully Stock
IF NOT then you must download HSPL3_PKG http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 and run it
Choose "2.08.0000" to return to stock
Click to expand...
Click to collapse
THANK YOU, but, i have the .exe file and i right click it but it doesnt give me the option to extract do i need some special program, this is a computer i had lay6ing around because my good one got a virus. and when i run the .exe a program to flash the rom comes up
I suggest Winrar its wat i use and works great and its a free archieve manager
Sent from my HTC Pyramid using XDA App
Rarlab.com
Sent from my HTC Pyramid using XDA App
whatis bootloader
When you restart the phone holding down the Volume down button and the 3 color screen shows up right away, thats the bootloader
Sent from my HTC Pyramid using XDA App
i put the file on my sd and when i boot in bootloader it doesnt show me how to flash, i renamed and everything all it says is serial
kingsjj912 said:
i put the file on my sd and when i boot in bootloader it doesnt show me how to flash, i renamed and everything all it says is serial
Click to expand...
Click to collapse
SO you extracted the .exe (downloaded update file) and moved the biggest file (RUU_Segned) to the sdcard.
You try name variations?
LEOIMG (remove .nbh)
leoIMG
leoimg
Tachi91 said:
SO you extracted the .exe (downloaded update file) and moved the biggest file (RUU_Segned) to the sdcard.
You try name variations?
LEOIMG (remove .nbh)
leoIMG
leoimg
Click to expand...
Click to collapse
I have also tried this and it is not working. Once I get into the bootloader screen nothing happens. I am at a loss. I have the stock ROM already on it but I forgot about the HSPL should I send it back as is.
toreone said:
I have also tried this and it is not working. Once I get into the bootloader screen nothing happens. I am at a loss. I have the stock ROM already on it but I forgot about the HSPL should I send it back as is.
Click to expand...
Click to collapse
You should remove HSPL before sending it back or else they will see that you messed with it and it void your warranty
as for the bootloader not starting the update process.... Aslong as the SDcard works in the phone and you renamed the RUU_signed to LEOIMG it should start up
I'm also at a lost here!
i renamed the file and the update process started...but for some reason, it failed!
Right now, as long as i power up my HD2, a big exclamation mark appeared saying software update failed. please try again. and it just stays there...
need help badly!
thx
do a task29 (if you still have HSPL) and try again..
Aslong as you can go into the bootloader everything is okay
Just connect your HD2 to the PC while in bootloader and run ruu.exe that you've downloaded..
start up phone and pressing volume down till red green blue white.
and then it stays on serial
Bootloader
Bootloader Mode:
Bootloader mode is handy for checking the HD2's version of Hard SPL as well as the installed ROM and Radio versions,and also for ROM or Radio flashing to the HD2. I sometimes use the Bootloader method to flash ROMs as it saves connecting to Activesync/WMDC because the PC recognises the HD2 as connected via USB. It is also useful for flashing a ROM or Radio version if the battery charge is less than 50%, as it ignores the 50% charge warning that is normally displayed when flashing if the HD2 is low on charge. Never use this method if you have less than a 30% charge as you will be in deep trouble if the HD2 runs out of power while flashing a ROM or Radio version!
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.