Related
anyone can help me?
.
after check my HD2 version is 1.42, I started the HSPL program, and after some time, it shows "xxxx hacked" on the HD2, but unfortunately, at this time, my computer showed an error, and the HSPL program stopped.
after that, whatever I do, HD2 can't started anymore. It shows an white triangle plus "!" on the screen.
.
what should I do now?
esuper said:
anyone can help me?
.
after check my HD2 version is 1.42, I started the HSPL program, and after some time, it shows "xxxx hacked" on the HD2, but unfortunately, at this time, my computer showed an error, and the HSPL program stopped.
after that, whatever I do, HD2 can't started anymore. It shows an white triangle plus "!" on the screen.
.
what should I do now?
Click to expand...
Click to collapse
extract with winrar the .exe from a stock rom i.e. 1.48 wwe.
copy the .nbh file to your sd card and rename it to leoimg.nbh (format your sd card to fat32 first).
put your sd card to your device.
hold both volup and voldown hardware buttons and reset your device.
follow the steps and hspl will be erased.
gianton said:
extract with winrar the .exe from a stock rom i.e. 1.48 wwe.
copy the .nbh file to your sd card and rename it to leoimg.nbh (format your sd card to fat32 first).
put your sd card to your device.
hold both volup and voldown hardware buttons and reset your device.
follow the steps and hspl will be erased.
Click to expand...
Click to collapse
where can I get the 1.48 wwe.?
put ur serial number in here (assuming you're in the UK)...
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
failing that, get it in here...
http://www.4shared.com/account/home.jsp
I'm not in UK, I'm in china
THEREFORE, the links doesn't work.
By the way, if I follow your instruction and upgrade to rom 1.48, how can I use the HSPL? since it's for 1.42 only.
esuper said:
I'm not in UK, I'm in china
THEREFORE, the links doesn't work.
By the way, if I follow your instruction and upgrade to rom 1.48, how can I use the HSPL? since it's for 1.42 only.
Click to expand...
Click to collapse
It worked for me on the 1.48 ROM. My phone shipped with it, and installing HSPL was the first thing I did so I could flash other ROMS.
I have heard that sometimes, you need to run it more than once if it doesn't work....but for me... it worked the first time.
Mine errored out somewhat similar to the OP's case. I just ran HSPL again and it said it completed successfull.
HINT: Make sure you choose the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time, it errored out and closed. Second time, i hit yes and it was success.
mikron15 said:
Mine errored out somewhat similar to the OP's case. I just ran HSPL again and it said it completed successfull.
HINT: Make sure you choose the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time, it errored out and closed. Second time, i hit yes and it was success.
Click to expand...
Click to collapse
What made you decide to press "no"? Also, make sure not to do anything else but move the mouse from time to time during the flashing. Dont bring up other tools, windows' start menu, use keyboard shortcuts to do anything; in other words, dont touch your keyboard, dont click your mouse, just move your mouse around to ensure it doesn't start the screensaver
Hold down the Volume Down button and "click" the power button to start up the phone in Boot Loader mode with the 3 color screen. You should see "Serial" on the screen. Now, plug in the USB cable to your PC, and the "Serial" should change to "USB". Start up HSPL and try loading it again to your phone.
If it doesn't work, try the same procedure again. I thought I had bricked my phone by trying to load a ROM that wasn't made for my region, and I had to retry loading HSPL 3 times before it worked.
mikron15 said:
.... the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time,
Click to expand...
Click to collapse
lol, it doesn't say "do you want to display hacked"....it says can you see hacked on your display?"
How To Install A NAND Android ROM On Your T-Mobile HD2
(I am linking to several Original Threads in this tutorial. The "Nice Thing To Do" is hit the "Thanks" button at the bottom of those threads to let the author know we appreciate their help)
mskip wrote an excellent tut over on the Leo forums. I used his instructions to create my own method, which has never given me issues.
My method has been used by others and has a 100% success rate as of this writing.
You MUST be HSPL'd. This is not a joke. If you attempt this method without HSPL, your phone won't boot. I can not help you if you do this. If you have the 3.14 radio, try flashing: this stock ROM before HSPL. Thanks to xmoo for the link! Original thread is here.
Read the following steps. If you're confused, read the explanations below.
(Preparing)
Folder: Create a new folder on your Desktop. I named mine Flash. Put all downloads here.
HSPL: Cotulla's HSPL 3 is located here. (Original thread is here)
Task29: Download the Task29.exe program located here. Unzip it to a new folder. Replace the RUU_Signed.nbh file with your favorite radio. I use 2.15.50.14 (Original thread is here)
MAGLDR: Get MAGLDR 1.11 (or the latest version!) located here. Unzip this to a new folder.
ROM: Visit HD2 NAND Android Development thread here on XDA and download your new ROM. I am currently using this one, but will probably have a different one tomorrow Unzip this to a new folder.
SD Card: Back up everything you want to keep from your SD card, and then format it. Hint: dcim is where your pictures are stored (File System: Fat32, Allocation unit size: 16 kilobytes) Personally, I like to uncheck the "Quick format"; it takes up to an hour but ensures my card is in the best shape possible. Once your format is complete, you may replace your backed up files.
(Flashing)
(*Optional: Remove your SD and SIM cards, if you are paranoid, like me )
Connect your phone via USB to the PC and wait for any drivers to install.
Task29: Navigate to the Task29 folder and right-click on task29.exe and "Run as administrator". Your phone will reboot to the initial flash screen. You will have to reset to Bootloader.
Wait for your PC to update the drivers again.
MAGLDR: Navigate to the MAGDLR folder and right-click on ROMUpdateUtility.exe and "Run as administrator". Your phone will reboot to a new boot screen.
Wait for your PC to update the drivers again.
You should be booted to the new MAGLDR screen and see a series of options. Use your volume rocker to highlight "USB Flash" and press the green call button to select it.
Wait for your PC to update the drivers again.
ROM: Navigate to your new ROM folder and right-click DAF.exe and "Run as administrator".
Congratulations! When your phone reboots, it should start MAGLDR which will immediately boot your new Android NAND ROM!
Now, here are the details about the above instructions. You should only need them if you are confused.
(Preparing)
I use this to keep myself organized. I own several HTC phones and flash them all, so keeping things separate is a must for me.
Having a Hard Secondary Program Loader is a must for any NAND flash, whether it be Windows Mobile or Android. This will void your T-Mobile warranty, but can be fixed by flashing a Stock T-Mobile ROM via your microSD card. Check my sig for the tutorial link on how to do that.
This is the easiest method to do a task 29. The other is using mtty, which is beyond the scope of this tutorial. Task29 completely erases the existing files and partitions, preventing any loose data bits from causing issues with a new flash. You should always Task29 between NAND ROMs.
MAGLDR: A group of devs have been working on a NAND loader for some time and Cotulla and the Dark Forces Team (DAF) were the first to release a working loader. There may be more to come in the future, but this is the first (and has Tetris built in )
You should never ask the "best ROM for my phone" question. Every chef works hard on their build and considers it the best. Every user has their favorite chef and considers them the best. You should shop around to find the one that fits you best.
I consider formatting the SD card a must if I have any data written to it by a ROM. If you have installed Android to your card, you definitely want to do this!
(Flashing)
Your phone will boot into several different modes throughout the process. Each mode may require separate drives for WMDC to talk to it.
To reset to your bootloader, pull the battery and replace it. Hold down the "Volume Down" rocker and press the power (End Call) button. The phone should boot up to the tri-color screen. If it did not, keep trying!
Your PC may not need to search for drivers at this point, but wait and see anyway, just in case
MAGDLR will work as your new bootloader, but you can always access the original tri-color bootloader if you need to.
Don't worry if you get the missing "ADB" driver warning here. Only PCs with the Android SDK properly installed will have this driver.
You must flash your new ROM from the #4 screen via USB. It is the only way and the tri-color Bootloader method won't work here.
Again, you can ignore the missing "ADB" driver if it occurs. See above x2 for explanation.
Some chefs are renaming "DAF.exe" to "Install.exe" or "ANDR_INSTALL.exe". No matter what it's named, it should be the blue icon. See your ROM thread for detailed installation instructions if you get confused here.
Hope this helps!
262 Update Error
I have tried many different options, but none seem to go past the error. It showed white htc, on black background, and 0% update complete; and freeze about 7-10 minutes, then a popup with an update error message display.
[262] Update Error
I am running Energy ROM, with HSPL 2.8
The rest of my software info:
ROM version
27.Dec.2010WWE
ROM Date
08/30/10
Radio Version
2.07.50.27_2
Hardware info:
RAM size
576MB
Flash memory size
1024MB
If you have any suggestion for me, I am greatly appreciated.
Thanks in advanced.
DaraM said:
I have tried many different options, but none seem to go past the error. It showed white htc, on black background, and 0% update complete; and freeze about 7-10 minutes, then a popup with an update error message display.
[262] Update Error
Click to expand...
Click to collapse
Thanks for the plethora of information. In this case, it wasn't needed but most of the time it is
Error 262 means there is a link error between your phone and the PC. Some have solved this by re-installing ActiveSync or Windows Mobile Device Center. Some people said it was solved by simply unplugging the phone and trying a different USB port or cable.
After installing android rom in nand, device continously reboots
I followed all your steps and installed everything (there war an error encountered while installing the rom in the last step) but when my phone boots into android, after about a minute it will just restart itself and continue the same over and over without ever fully going into android.
can you please tell me how to get over this?
parthakolkata1 said:
I followed all your steps and installed everything (there war an error encountered while installing the rom in the last step) but when my phone boots into android, after about a minute it will just restart itself and continue the same over and over without ever fully going into android.
can you please tell me how to get over this?
Click to expand...
Click to collapse
It looks like the Android build you chose is either incompatible or was somehow corrupted when you downloaded it.
I suggest you delete the copy you have on your PC and download a different ROM, and then start over again.
Since there was an error, you don't want to try a fresh install without a task 29 and reinstalling hspl.
If you are using the Euro version of the HD2, don't try to install a TMOUS ROM, and vice versa. If you aren't sure, ask the chef who posted the ROM you want.
Hope this helps!
Radio Version
2.07.50.27_2
I think that the RADIO has to be 2.08.50.xx or a .50 greater.
Hello, I have some problems with my mob.phone HTC HD2: after get all the steps done my mobile stop working, then I tried install windows and tried turn on first time and my phone shows white screan with name HTC and don`t work at all,then i tried reset and Hard reset all setings and turn on again and than screan appears again with name HTC.
When i conect my phone to pc by usb, so my pc can`t find that phone.
Can you help me with this problem.
Thank you.
paulagrace said:
Hello, I have some problems with my mob.phone HTC HD2: after get all the steps done my mobile stop working, then I tried install windows and tried turn on first time and my phone shows white screan with name HTC and don`t work at all,then i tried reset and Hard reset all setings and turn on again and than screan appears again with name HTC.
When i conect my phone to pc by usb, so my pc can`t find that phone.
Can you help me with this problem.
Thank you.
Click to expand...
Click to collapse
One thing that was specified but not in the steps was HSPL. If you don't have that, you can't flash.
After having a bit of problem using the original tut you reference in your first post(basically it got locked on gogogo and a variety of problems thereafter), I am very happy to report that your variation on the method not only worked for me, but worked on the first attempt. And it has thus far done so each time I have tried it since. You cannot imagine my relief after all the frustration I had previously. So just wanted to let you know how helpful I found your post. Thanks!
The only edit I would suggest is that I believe USB Flashing is option 5 now instead of 4.
FWIW I was originally on ROM 2.13.531.1 (90963) WWE with Radio 2.10.50.26(now on 2.14.50.04).
gokun said:
The only edit I would suggest is that I believe USB Flashing is option 5 now instead of 4.
Click to expand...
Click to collapse
I just tried a fresh download of MAGLDR 1.11 and the option is still #4. Did you perchance grab version 1.12?
It would still work, but 1.12 gives you the additional option of installing and Windows 7 Phone ROM.
Yes on MAGLDR the option is 5 instead of 4.
Other than that, and the part about removing your sim and SD card, looks like an excellent guide.
apallohadas said:
Yes on MAGLDR the option is 5 instead of 4.
Other than that, and the part about removing your sim and SD card, looks like an excellent guide.
Click to expand...
Click to collapse
I am updating the tutorial to reflect on the changing menu numbers, thank you!
As far as the SIM and SD card removal, I did mention that this is optional but recommended. Yes, I realize that this is from the early days of flashing and is more than likely not needed, but in my defense this is my own method and I have never, ever had a bad flash. I've owned several HTC phones going back for a few years now and have not bricked a single one. I would consider that a pretty good track record, considering the number of posters who did brick their phone and have no idea what went wrong.
In light of your input, I will re-word the OT to ensure that the "optional" part is clarified.
Oh I totally hear ya.
I've never had a bad flash either. I think that some of the "Brickensteins" just do something wrong and don't mention it (like unplugging the phone mid-flash).
In your favor, I did read in one of the WP7 tutorials that the sd card should be removed, but since I don't plan on flashing that any time soon, I'll leave that wisdom with wiser hands
Thank you very much
HELP
Someone- anyone, I desperately need help. I went to a tmobile store because I was miserable with my HD2 and the man there gave me this website to turn my phone into an android, but i am NOT a tech person and now my phone is totally gone and I have no idea what I did wrong. I am so pissed I even did this. I need someone to help me.
my email is [email protected]
lalablu13 said:
Someone- anyone, I desperately need help. I went to a tmobile store because I was miserable with my HD2 and the man there gave me this website to turn my phone into an android, but i am NOT a tech person and now my phone is totally gone and I have no idea what I did wrong. I am so pissed I even did this. I need someone to help me.
my email is [email protected]
Click to expand...
Click to collapse
Ok do this hold the volume button down while powering on your HD2 and see if the multicolor bootloader screen comes up. If so you are not fubared. If you get bootloader you can save your HD2. Click on my Guide linked in my sig and read it then click the links at the top of my guide if you want to install Android or the link for WP7 if you want to install it. The links I have at the top of my guide are links to very good and extensive guide. If you want come post back here and I or others will help you and if you want to just PM me.
Please Help me...
I followed all your steps.. more then once. But every time I tried, I failed :[
I believe im doing everything right up until i have to connect my phone to run the DAF.exe file. When it says looking for usb, i have my phone connected but it then gives me this error;
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I would love to use Android on my HD2.. so can someone help me? ._."
ol3randon said:
I followed all your steps.. more then once. But every time I tried, I failed :[
I believe im doing everything right up until i have to connect my phone to run the DAF.exe file. When it says looking for usb, i have my phone connected but it then gives me this error;
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I would love to use Android on my HD2.. so can someone help me? ._."
Click to expand...
Click to collapse
You are using MAGLDR 1.13, not 1.11. On 1.13 (not covered by this tutorial), you have to choose "ROMUpdateUtility.exe", not "DAF.exe".
I'm trying reinstall WM6.5 on my HTC HD2 from MAGLDR V1.13.
I've downloaded the stock rom from HTC website and im trying run the installer but it fails it cant seem to pick up my phone as a USB connection.
I tried the bootloader way but it always get stuck at the installation part at 0%.
what am i? doing wrong, its driving me mad..
SPL version is SPL-2.08.0000
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
GreatLorens said:
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
Click to expand...
Click to collapse
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
rafter_01 said:
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
Click to expand...
Click to collapse
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
ankushmulay said:
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
Click to expand...
Click to collapse
what ive done so far,
re-installed the hspl 2.08 and then installed the radio 2.15.50.14 from the following site: http://www.addictivetips.com/mobile/how-to-install-hardspl-2-08-on-htc-hd2/
but now at the bootloader im getting the following error 'upgrade ROM code error Please try again"
What have i done wrong???
thanks
flash hspl ... radio ... then mag ... then try the downgrade to winmo
rubledub said:
flash hspl ... radio ... then mag ... then try the downgrade to winmo
Click to expand...
Click to collapse
after the radio, I cannot download magdlr, it stops at 29%.. Or sometimes doesn't do anything!!
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Thanks for this info, will try it. Have you got a link to task 29? Is it a software?
No but it is all over XDA. I think you'll find it someware on the WM 6.5 thread. If that doesn't work your nand will be stuffed but it has allways worked for me!
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Yes, even i suggest you the "flash via micro sd card" method becoz it works in worst cases. and follow all the steps sequencely. good luck
Task29 gives an error 290 and doesn't complete.
Im getting frustrated... What can i do next
task 29 now wipes my phone but everytime i flash a new rom is crashes at 9% or 10% and then i get the error 290.
i downloaded the stock rom for my phone... argggh what can be done?
thanks
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
i must agree with ghost ... sounds like you flashed the poor baby to death :'( sad sad day! and very rare i might add!
GhostXSeries said:
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
Click to expand...
Click to collapse
cannot believe i messed it up.......
know where i can send it for repair? will HTC cover it under warranty? will they be suspicious?
anyone? do i need to ring my phone contract people or go directly to HTC?
Thanks
Depends how old it is. It may need to go directly to HTC to get it fixed.
I read somewhere that error [290]: Invalid Command - the ROM Update Utility has encountered communication errors during the update process.
Try changing the usb cable/connect directly to usb port (not usb hub) if you still want to use usb for flashing.
I always use the sdcard method when there's a problem flashing via usb. Rename RUU_signed.nbh (extract from stock rom exe package) to LEOIMG.nbh and copy the file to sdcard (sdcard MUST be formatted as FAT32 - use HP format tool). Put sdcard into the phone and boot into bootloader mode ... see if it works ...
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....
thanks for quick reply
I am trying to do what you instructed me.
Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.
I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...
leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!
freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills
Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.
I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?
Everytime I turn on my phone, it goes straight into bootloader mode. I don't know what to do. I've been trying to google for the past hour or so, and no luck. Can anybody help?
Could be that your vol down button is stuck, try pressing and releasing quickly a few times ...just a thought!
PS. Your phone is not bricked if you can get to boot loader!!!
i tried that, and it didnt work. any other ideas?
can anyone please help?
Maby you don't have an OS. So try to flash a stock rom.
Sorry for bad english.
i tried that, but it either loses connection or it will say something about, how the the version of the o.s doesnt work for my phone. also on the phone itself, when it tries to download the rom, where a htc image is normally there, it isnt.
i have no idea what to do
It would be helpful to understand what you were running on your phone before the problem occurred?
The Bootloader you are seeing - I assume it is the hacked Cotulla one?
If you connect your phone to a PC does the bootloader screen show "USB" rather than serial?
If you have Cotulla bootloader and USB connection to PC, I'd start again with a clean install....not sure what you were using...but Typhoon is nice and Stable
http://forum.xda-developers.com/showthread.php?t=933951
It has a "clean installation" guide that you can follow....
http://flashmirrors.com/files/ytjzury5kvx9p91/Clean Installation.pdf
HTH.
K
I was trying to reinstall a stock gingerbread o.s on the phone, but something happened, and it wouldn't allow me to. So i just wanted to reinstall stock tmobile rom, and install android after that.
Yes i have cotulla bootloader, and whenever the phone starts up, it says serial, but it ill change to usb when i plug it in.
i couldnt open the pdf file.
mh48 said:
i couldnt open the pdf file.
Click to expand...
Click to collapse
If you are getting errors while flashing the stock ROM, as in windows mobile, then 99% of the time you have bad NAND memory and the phone needs to be jtaged or the motherboard needs to be replaced. Ive experienced a lot of these similiar threads over on PPCGeeks with the HTC Touch Pro 2
whenever the image file tries to update through bootloader i get an error/update image fail due to the radio i think. it says its spl 2.08 hspl, i tried uninstalling hspl but that didnt work. what could be the problem? or am i pretty much out of luck?
mh48 said:
i couldnt open the pdf file.
Click to expand...
Click to collapse
Those mirrors do seem broken.
Well this thread gives step by step instructions.
http://forum.xda-developers.com/showthread.php?p=11097380
you have HSPL, so you need to task29, MAGLDR, CWM and then a ROM.....it'll be interesting to see if you get anywhere....
Suggest following it step by step and seeing what happens before we write off your phone!
im not able to install magldr or a new rom, it either loses connection, or says it isnt compatible
mh48 said:
im not able to install magldr or a new rom, it either loses connection, or says it isnt compatible
Click to expand...
Click to collapse
Well if you have Cotulla HSPL, and USB shown on that screen, and are connected to your PC and Task29 is not running then I'm afraid I'm out of knowledge....
Sorry.
so i found that i have a ruunbh error, what do i have to do in order to fix this?
with ruunbh I suggest you go back and flash a stock WM rom.
That has worked for some.
If that gets you back running (at winmo 6.5) then you need to start the Android process again....
......By starting with HSPL and moving on through task29, radio, magldr, clockworkmod and a android rom.
going back to winmo is described here:
http://forum.xda-developers.com/showthread.php?t=935145&highlight=stock+rom
Let's see if you can go back to winmo first!
it keeps giving me an update error, when i try to install a custom wm rom and official rom any other suggestions?
So of the steps below....where and what is the update error?
--------------------------
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to LEOIMG.nbh
Copy LEOIMG.nbh into your SD card root directory which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
im using tmobile u.s version
You really like being brief don't you.