anyone can help me?
.
after check my HD2 version is 1.42, I started the HSPL program, and after some time, it shows "xxxx hacked" on the HD2, but unfortunately, at this time, my computer showed an error, and the HSPL program stopped.
after that, whatever I do, HD2 can't started anymore. It shows an white triangle plus "!" on the screen.
.
what should I do now?
esuper said:
anyone can help me?
.
after check my HD2 version is 1.42, I started the HSPL program, and after some time, it shows "xxxx hacked" on the HD2, but unfortunately, at this time, my computer showed an error, and the HSPL program stopped.
after that, whatever I do, HD2 can't started anymore. It shows an white triangle plus "!" on the screen.
.
what should I do now?
Click to expand...
Click to collapse
extract with winrar the .exe from a stock rom i.e. 1.48 wwe.
copy the .nbh file to your sd card and rename it to leoimg.nbh (format your sd card to fat32 first).
put your sd card to your device.
hold both volup and voldown hardware buttons and reset your device.
follow the steps and hspl will be erased.
gianton said:
extract with winrar the .exe from a stock rom i.e. 1.48 wwe.
copy the .nbh file to your sd card and rename it to leoimg.nbh (format your sd card to fat32 first).
put your sd card to your device.
hold both volup and voldown hardware buttons and reset your device.
follow the steps and hspl will be erased.
Click to expand...
Click to collapse
where can I get the 1.48 wwe.?
put ur serial number in here (assuming you're in the UK)...
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
failing that, get it in here...
http://www.4shared.com/account/home.jsp
I'm not in UK, I'm in china
THEREFORE, the links doesn't work.
By the way, if I follow your instruction and upgrade to rom 1.48, how can I use the HSPL? since it's for 1.42 only.
esuper said:
I'm not in UK, I'm in china
THEREFORE, the links doesn't work.
By the way, if I follow your instruction and upgrade to rom 1.48, how can I use the HSPL? since it's for 1.42 only.
Click to expand...
Click to collapse
It worked for me on the 1.48 ROM. My phone shipped with it, and installing HSPL was the first thing I did so I could flash other ROMS.
I have heard that sometimes, you need to run it more than once if it doesn't work....but for me... it worked the first time.
Mine errored out somewhat similar to the OP's case. I just ran HSPL again and it said it completed successfull.
HINT: Make sure you choose the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time, it errored out and closed. Second time, i hit yes and it was success.
mikron15 said:
Mine errored out somewhat similar to the OP's case. I just ran HSPL again and it said it completed successfull.
HINT: Make sure you choose the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time, it errored out and closed. Second time, i hit yes and it was success.
Click to expand...
Click to collapse
What made you decide to press "no"? Also, make sure not to do anything else but move the mouse from time to time during the flashing. Dont bring up other tools, windows' start menu, use keyboard shortcuts to do anything; in other words, dont touch your keyboard, dont click your mouse, just move your mouse around to ensure it doesn't start the screensaver
Hold down the Volume Down button and "click" the power button to start up the phone in Boot Loader mode with the 3 color screen. You should see "Serial" on the screen. Now, plug in the USB cable to your PC, and the "Serial" should change to "USB". Start up HSPL and try loading it again to your phone.
If it doesn't work, try the same procedure again. I thought I had bricked my phone by trying to load a ROM that wasn't made for my region, and I had to retry loading HSPL 3 times before it worked.
mikron15 said:
.... the selection in the end quicly when it asks you if you want to display the ms HACKED on your device. When i clicked NO first time,
Click to expand...
Click to collapse
lol, it doesn't say "do you want to display hacked"....it says can you see hacked on your display?"
Related
Hi All,
I have tried searching for the answer to this question and cannot find it, though I am sure I wont be the first to have had this problem.
I am trying to flash a new rom on my touch HD, have tried two different ones - duttys and black pearl. I have managed to get the upsl to work in the bootloader but i cannot get a rom to boot from the SD card. I have followed the instructions on the pages with the roms (same in each) and all i see is a screen flash up after running uspl saying "no image file" then it goes back to the bootloader screen.
In order to get out of bootloader I have to remove my battery which i assume is normal and then it goes back to the normal spl.
I am pulling my hair out on this one - and I dont have much to pull on!
I didnt think it would be so hard with all of the instructions about!
What want you do?
What stage has you done?
I wanted to load duttys rom using upsl but unfortunately I couldnt get it to work so I used the program that comes with the rom to load it in without using bootloader.
I had to load on Olinex to make it work
I had a similar thing the other day when I was having a blonde moment. Renamed the image file BLACIMG.nbh, instead of just BLACIMG......so the actual file name when I looked in to it was actually sitting as BLACIMG.nbh.nbh
Once I'd deleted the .nbh extension out of the file name I renamed it worked.
deafpotato said:
Hi All,
I have tried searching for the answer to this question and cannot find it, though I am sure I wont be the first to have had this problem.
I am trying to flash a new rom on my touch HD, have tried two different ones - duttys and black pearl. I have managed to get the upsl to work in the bootloader but i cannot get a rom to boot from the SD card. I have followed the instructions on the pages with the roms (same in each) and all i see is a screen flash up after running uspl saying "no image file" then it goes back to the bootloader screen.
In order to get out of bootloader I have to remove my battery which i assume is normal and then it goes back to the normal spl.
I am pulling my hair out on this one - and I dont have much to pull on!
I didnt think it would be so hard with all of the instructions about!
Click to expand...
Click to collapse
Did you remove storage card before entering Bootloader screen? Put storage card in after Bootloader is up and before opening USPL.
USPL HowTo
Sorry to ask again.
I had the same problems.
As I couldn't do with USPL (just did not find reasonable step-by-step instructions), I used OliNex HardSPL which worked fine.
But now with new ROM updates, I face significant problems with display color and radio not working.
So, I actually definitely need and would like to ask somebody to take the time to post ...
step-by-step instructions on how to use USPL
PLEASE !
USPL HowTo
Obviously, I just missed out one point and needed to change another.
But for those in the same situation:
Probably only works on Windows XP, didn't work on my Vista PC.
(1) Download the latest USPL (currently 2.5)
(2) extract anywhere on your computer
(3) Go to ActiveSync properties and disable "Allow USB Connections" option
(4) Turn off your device (long press "Power" key or remove/replace battery)
(5) then enter SPL bootloader mode (tri-color)
- Blackstone: when device turned off by pressing and holding "VolDown" key plus "Soft Reset" simultaneously
- did NOT work for me: by pressing and holding "Power" and "VolDown" keys simultaneously.
(6) Connect USB cable and make sure "USB" label appeared in the white portion of the screen on your device.
(7) start / run "cmd" (DOS console) on your desktop PC
(8) Execute blac_uspl.exe in DOS window
current status and any error messages USPL encounters will be displayed in the console window.
(9) If everything goes well, your device will restart and SPL version label should read "1.15.USPL" indicating that USPL was loaded successfully.
You ever read through the USPL thread?
stepw said:
10. How to use it?
Download the latest USPL attached to the second post of this thread and extract anywhere on your computer.
Go to ActiveSync properties and disable "Allow USB Connections" option. Turn off your device (long press "Power" key or remove/replace battery), then enter SPL bootloader mode (tri-color) by pressing and holding "Power" and "VolDown" keys simultaneously.
Connect USB cable and make sure "USB" label appeared in the white portion of the screen on your device.
Execute blac_uspl.exe; current status and any error messages USPL encounters will be displayed in the console window.
If everything goes well, your device will restart and SPL version label should read "1.14.USPL" indicating that USPL was loaded successfully.
If SPL version does not include "USPL" or if the screen is black, soft reset and try again. If "USB" label disappeared and did not reappear, reinsert USB cable.
You can then start RUU update to flash RUU_signed.nbh. Once RUU update is completed, device will restart using regular flashed SPL.
If you want to flash from SD card instead, make sure your SD card is not inserted when you enter the bootloader originally.
SPL will try to install it and would fail if blacimg.nbh is not signed by HTC. Insert the card after "USB" label comes up in SPL but before running USPL.
You can run "blac_uspl.exe ?" to get command line parameter help. Only 1 parameter is accepted and that is the name of an SPL file you want to load. You can load an MFG SPL or HSPL. USPL automatically takes care of allowing unsigned/cooked ROM flashing with any SPL you use.
Click to expand...
Click to collapse
Should be just clear, isn't it? Have used it a few times, without any problems ...
No, it probably wasn't clear enough.
At least it didn't work for me.
see the changes I applied above (plus minor additions)
remove the memroy card!
the first time i tried the upgrade, it failed... because my memory card was inside the phone. worse, the mem card contains the rom upgrade file.
pls remove the memory card first.. then run the ruu update.
after which, it will state that rom is 1.15.
then can insert memory card (only if u see the USB word on your phone)
then can re-run program.. and update firmware..
I have experienced this problem where no image file was found when flashing from UPSL. I think this is some kind of random **** that happens. I have flashed countless ROM with this method and sometimes this **** just happens without any reason.
hi, how come my tri-color bootloader only shown "Serial" in the white portion of the screen? Is there something wrong with my HTC HD phone? I try to reflash the ROM thru this way since ActiveSync cannot detect my HD. My HD phone only shown battery charging whenever I plugged in the mini-USB cable into the computer.
Anyone can enlighten my issues? Thank you in advance!
I met the same issue, and I solved it by re-formatting the card using FAT32.
MOD EDIT
I'm closing this thread as dummies guide, USPL & HSPL threads already exist.
If your having still having difficulties post your query into relevant thread. I'd suggest you start with dummies flashing guide thread.
Thread closed
i got this phone 1 day, and it's already dead
i installed hspl, and a custom wwe rom, it was working fine. But then it froze on me, when i tried to start opera, it said it was clearing the memory or something. When i rebooted the phone, at first it refused to boot, froze at the pink circle.
now i got it to boot a couple of times, and HTC sense is mostly gone, i get to see an ugly Win M version... I cant get the phone to connect, so i can reinstall another firmware ... what can i do?
It's just a pretty expensive flashlight now.
GregoryGoris said:
i got this phone 1 day, and it's already dead
i installed hspl, and a custom wwe rom, it was working fine. But then it froze on me, when i tried to start opera, it said it was clearing the memory or something. When i rebooted the phone, at first it refused to boot, froze at the pink circle.
now i got it to boot a couple of times, and HTC sense is mostly gone, i get to see an ugly Win M version... I cant get the phone to connect, so i can reinstall another firmware ... what can i do?
It's just a pretty expensive flashlight now.
Click to expand...
Click to collapse
Try flashing it by SD card method
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I tried
and failed.
I uploaded the nbh from your signature to my freshly formatted Fat32 microsd card
the tricolore screen came up. It said something about reading, and some digits at the top (005 something), back to the tricolore screen.
and now its been like that for about an hour... (PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0X10 in the top red part
SERIAL in the white...
what can i do? There has to be a way...
plug in the usb whilst on the three colored screen. when serial becomes usb flash your rom from usb.
samsamuel said:
plug in the usb whilst on the three colored screen. when serial becomes usb flash your rom from usb.
Click to expand...
Click to collapse
wow, i feel like a fool for not thinking about this
thanks a lot, works like a charm again!
no worries.
when you look in bootloader, if it says spl x.x.hspl then you can flash anything from usb. if it said x.x.0000 then it would only accept roms specific to your model/region/provider.
its worth remembering you can flash hspl from the bootloader screen too.
oh and when it was sticking at the pink circle,,,,,, almost certainly because you hadn't flashed a compatible radio.
if it happens again go into bootloader and flash the radio, just like flashing a rom.
i think giving your hd2 a hard reset will make it work again.
I did exactly the same thing. Have flashed ROMs before on other devices and foolishly plunged straight into to flashing my HD2 without reading the instructions carefully; i.e. check the battery level is >50%, ensure you have HardSPL'd and flash the correct radio version first.
I tried Energy ROM Build 21907 and had it working for a while until I powered off and then tried to switch on again and it froze with a pink circle showing. I had checked the radio version (2.04) but had not heeded the warning to use 2.07.50 or higher, avoid 2.xx.51 like the plague etc. Just plain hadn't followed instructions.
Doing a soft reset doesn't work.
Doing a hard reset doesn't work.
Hitting one's head against a wall does not work.
Following samsamuel's advice about plugging in after hard reset does work:
- Have your Windows PC ready but don't plug in the device yet
- Download CustomRUU.exe and the correct radio file
- Rename the radio file to RUU_signed.nbh
- Hold the device's Vol Down and Power keys, let em go and do a hard reset
- You'll see the tricolour screen and you should see HSPL near the top and "Serial" at the bottom
- Plug in the USB cable and "Serial" changes to "USB"
- Run CustomRUU on your PC and follow the instructions
Thank you very much, samsmuael, for rescuing me on this occasion.
I had a frightnening experience in the same vein today also.....
Decided to go for my first flash........which turned into 3...
Anyway I flashed an energy rom...........
Then a cleanex which left me unable to connect via activesync........
Had a quick panic.........got on here for some answers and found something about flashing via cable from bootloader.......... Panic over
Flashed to another energy rom.......... all is well again......
Only problem is what to flash next........
hi sir iam new in this forum plz help me my htc hd2 shows on screen software update failed it cannot connected to active sync but connected to my pc .i download its hspl and rom butt next what can i do plz help me.
Try to get it into bootloader by taking out your battery, putting it back in, and then holding the volume down button while pressing the pwr/end key.
You have to hold the vol- key while the phone starts up, then you should see a screen with a few colores bars and some info.
EXACTLY what all info is displayed in your tri-color (bootloader) screen?
i tried the same. phone is in boot loader mode butt cannot connect to hspl2 it gives error plz help me .what can i do next its spl is 2.08.0000 8G XE
Don't bother trying to flash it via ActiveSync or Windows Mobile Device Center on your computer. If it has already failed, it will likely fail again.
Get a class 2, 4gb sd card, and erase all files and format it (FAT32).
Get a ROM that you are CERTAIN is compatible with your 1024 Leo (TMo-US) and inside the zip file you will find a file with the extension .nbh
Rename it to LEOIMG.nbh and transfer the file to your freshly formatted 4gb class2 card. (Not inside any folders, just on the card)
Take the battery out of your phone, then place the sd card into the phone.
Turn the phone on while holding the vol- button, to enter bootloader, and your phone will detect the LEOIMG.nbh file after a few seconds and ask you if you want to update your software.
Your phone will tell you to press a button to start the update. Press the button. Wait for the update to complete. The phone may reboot and flash the update again, I've had mine do that, it's okay, just let it go.
When everything is done, it should either turn off by its self, or boot up normally by its self.
If the update fails the first time, try it again.
Turn it off, take out the sd card, and boot it up normally.
If you follow these steps exactly, then you will not fail.
If you do follow thes steps exactly and the phone doesn't get all the way thru the update process, and fails, then it's one of two things:
1. You tried to flash an incompatible ROM
2. There's something wrong with the hardware of your phone, or your bootloader is corrupted.
Good luck and happy flashing!!!!!
bro thank u for give me complete detail for that butt i am confused that where i find compatibale rom.plz if u up load for me that rom and if possible how to find the file LEOIMG.nbh.plz sorry for my bad english. my phone spl is 2.08.000.and also that software windows Mobile Device Center.
usmancheema said:
bro thank u for give me complete detail for that butt i am confused that where i find compatibale rom.plz if u up load for me that rom and if possible how to find the file LEOIMG.nbh.plz sorry for my bad english. my phone spl is 2.08.000.and also that software windows Mobile Device Center.
Click to expand...
Click to collapse
OK since your SPL is 2.08, you will first need to install HSPL to your phone through your computer.
Don't worry, HSPL never fails over the computer , as ROMs sometimes do.
http://forum.xda-developers.com/attachment.php?attachmentid=347299&d=1277158888
Just connect your phone through Windows Mobile Device Center and run the HSPL program (right-click it and Run As Administrator), following the instructions the program gives you. When asked to choose an SPL, choose 2.08 HSPL.
Allow the program to work its magic, and when it is finished, go into bootloader and confirm manually that you have HSPL by looking on the bootloader screen for the name Cotulla, and it should say 2.08HSPL
Then I would suggest any of the ROMs here:
http://hotfile.com/list/588162/580b43d
Personally I would go with the Dinik one, the icons and everything are really nice looking.
Just follow my previous instructions to flash it via sd card, and you'll be good to go.
After that, go learn about putting some Android builds on your sd card in the HD2 forum, Android subfora.
Lots of fun to be had there.
Hope it all works well for you, don't hesitate to ask more ?'s if you're not sure about something
I'm trying reinstall WM6.5 on my HTC HD2 from MAGLDR V1.13.
I've downloaded the stock rom from HTC website and im trying run the installer but it fails it cant seem to pick up my phone as a USB connection.
I tried the bootloader way but it always get stuck at the installation part at 0%.
what am i? doing wrong, its driving me mad..
SPL version is SPL-2.08.0000
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
GreatLorens said:
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
Click to expand...
Click to collapse
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
rafter_01 said:
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
Click to expand...
Click to collapse
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
ankushmulay said:
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
Click to expand...
Click to collapse
what ive done so far,
re-installed the hspl 2.08 and then installed the radio 2.15.50.14 from the following site: http://www.addictivetips.com/mobile/how-to-install-hardspl-2-08-on-htc-hd2/
but now at the bootloader im getting the following error 'upgrade ROM code error Please try again"
What have i done wrong???
thanks
flash hspl ... radio ... then mag ... then try the downgrade to winmo
rubledub said:
flash hspl ... radio ... then mag ... then try the downgrade to winmo
Click to expand...
Click to collapse
after the radio, I cannot download magdlr, it stops at 29%.. Or sometimes doesn't do anything!!
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Thanks for this info, will try it. Have you got a link to task 29? Is it a software?
No but it is all over XDA. I think you'll find it someware on the WM 6.5 thread. If that doesn't work your nand will be stuffed but it has allways worked for me!
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Yes, even i suggest you the "flash via micro sd card" method becoz it works in worst cases. and follow all the steps sequencely. good luck
Task29 gives an error 290 and doesn't complete.
Im getting frustrated... What can i do next
task 29 now wipes my phone but everytime i flash a new rom is crashes at 9% or 10% and then i get the error 290.
i downloaded the stock rom for my phone... argggh what can be done?
thanks
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
i must agree with ghost ... sounds like you flashed the poor baby to death :'( sad sad day! and very rare i might add!
GhostXSeries said:
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
Click to expand...
Click to collapse
cannot believe i messed it up.......
know where i can send it for repair? will HTC cover it under warranty? will they be suspicious?
anyone? do i need to ring my phone contract people or go directly to HTC?
Thanks
Depends how old it is. It may need to go directly to HTC to get it fixed.
I read somewhere that error [290]: Invalid Command - the ROM Update Utility has encountered communication errors during the update process.
Try changing the usb cable/connect directly to usb port (not usb hub) if you still want to use usb for flashing.
I always use the sdcard method when there's a problem flashing via usb. Rename RUU_signed.nbh (extract from stock rom exe package) to LEOIMG.nbh and copy the file to sdcard (sdcard MUST be formatted as FAT32 - use HP format tool). Put sdcard into the phone and boot into bootloader mode ... see if it works ...
Everytime I turn on my phone, it goes straight into bootloader mode. I don't know what to do. I've been trying to google for the past hour or so, and no luck. Can anybody help?
Could be that your vol down button is stuck, try pressing and releasing quickly a few times ...just a thought!
PS. Your phone is not bricked if you can get to boot loader!!!
i tried that, and it didnt work. any other ideas?
can anyone please help?
Maby you don't have an OS. So try to flash a stock rom.
Sorry for bad english.
i tried that, but it either loses connection or it will say something about, how the the version of the o.s doesnt work for my phone. also on the phone itself, when it tries to download the rom, where a htc image is normally there, it isnt.
i have no idea what to do
It would be helpful to understand what you were running on your phone before the problem occurred?
The Bootloader you are seeing - I assume it is the hacked Cotulla one?
If you connect your phone to a PC does the bootloader screen show "USB" rather than serial?
If you have Cotulla bootloader and USB connection to PC, I'd start again with a clean install....not sure what you were using...but Typhoon is nice and Stable
http://forum.xda-developers.com/showthread.php?t=933951
It has a "clean installation" guide that you can follow....
http://flashmirrors.com/files/ytjzury5kvx9p91/Clean Installation.pdf
HTH.
K
I was trying to reinstall a stock gingerbread o.s on the phone, but something happened, and it wouldn't allow me to. So i just wanted to reinstall stock tmobile rom, and install android after that.
Yes i have cotulla bootloader, and whenever the phone starts up, it says serial, but it ill change to usb when i plug it in.
i couldnt open the pdf file.
mh48 said:
i couldnt open the pdf file.
Click to expand...
Click to collapse
If you are getting errors while flashing the stock ROM, as in windows mobile, then 99% of the time you have bad NAND memory and the phone needs to be jtaged or the motherboard needs to be replaced. Ive experienced a lot of these similiar threads over on PPCGeeks with the HTC Touch Pro 2
whenever the image file tries to update through bootloader i get an error/update image fail due to the radio i think. it says its spl 2.08 hspl, i tried uninstalling hspl but that didnt work. what could be the problem? or am i pretty much out of luck?
mh48 said:
i couldnt open the pdf file.
Click to expand...
Click to collapse
Those mirrors do seem broken.
Well this thread gives step by step instructions.
http://forum.xda-developers.com/showthread.php?p=11097380
you have HSPL, so you need to task29, MAGLDR, CWM and then a ROM.....it'll be interesting to see if you get anywhere....
Suggest following it step by step and seeing what happens before we write off your phone!
im not able to install magldr or a new rom, it either loses connection, or says it isnt compatible
mh48 said:
im not able to install magldr or a new rom, it either loses connection, or says it isnt compatible
Click to expand...
Click to collapse
Well if you have Cotulla HSPL, and USB shown on that screen, and are connected to your PC and Task29 is not running then I'm afraid I'm out of knowledge....
Sorry.
so i found that i have a ruunbh error, what do i have to do in order to fix this?
with ruunbh I suggest you go back and flash a stock WM rom.
That has worked for some.
If that gets you back running (at winmo 6.5) then you need to start the Android process again....
......By starting with HSPL and moving on through task29, radio, magldr, clockworkmod and a android rom.
going back to winmo is described here:
http://forum.xda-developers.com/showthread.php?t=935145&highlight=stock+rom
Let's see if you can go back to winmo first!
it keeps giving me an update error, when i try to install a custom wm rom and official rom any other suggestions?
So of the steps below....where and what is the update error?
--------------------------
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to LEOIMG.nbh
Copy LEOIMG.nbh into your SD card root directory which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
im using tmobile u.s version
You really like being brief don't you.