Related
Sorry for the double post but my other one is on page 94 of a different thread and probally wont get seen and i am now getting desperate,anyway
I have just followed the procedure as I was going to install a different ROM from ★ Miri & DINIK "Anastasia" ROM to replace my installed ROM from ENERGY
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
First I did a task 29 and now I am now stuck in the bootloader screen with its tri colour screen with USB in the white part,if I have the cable connected or Serial if the cable is removed.
I have tried a few times but it still stays on the boot screen.I am running windows 7 32 bit on my laptop and have tried all 3 different USB ports with the same result.
How do I get the phone back working?
Thanks
Your Phone is stuck in the bootscreen because you have removed the operating system with the task29. so this is normal.
make sure you have transferred the leoimg.nbh to the storage card and disconnect the phone from the cable. reboot the phone and flashing should start automatically. if it does not
now connect your phone to the computer and you will see the screen change from serial to usb
just follow the procedure as described in on the forum to flash from a computer. you do not need to be connected to activesync to do this as the phone is already in bootloader mode. just start the flashing program as described.
Thanks for that,I did realise thats the reason its stuck in the bootloader.I have connected the phone back to the computer a few times and waited untill the USB came onto the screen but the divice does not show up in "My Computer" and when I try to restore the ROM I get a 260 connection error.
I think I have just sorted the problem,not sure the reason but it was failing on a 16GB fat32 card. I have just borrowed a 2GB card from a friend put exactly the same image on and it is now updating the ROM.
Thats strange how the card has made that much of a difference,but thanks anyway.
I'll let you know how the update goes in a few minutes when it completes.
Thanks
many people have said the same thing. 16 doesn't work, 8 sometimes works, 2 usually works.
Up and running great now,,Looks like i'll have to invest in a small 2GB card as a back up,
Thanks again
Stuck also in bootloader
wilcovh said:
Your Phone is stuck in the bootscreen because you have removed the operating system with the task29. so this is normal.
make sure you have transferred the leoimg.nbh to the storage card and disconnect the phone from the cable. reboot the phone and flashing should start automatically. if it does not
now connect your phone to the computer and you will see the screen change from serial to usb
just follow the procedure as described in on the forum to flash from a computer. you do not need to be connected to activesync to do this as the phone is already in bootloader mode. just start the flashing program as described.
Click to expand...
Click to collapse
I flashed my HTC Leo to Dutty Multi-lang, when finished and reboot it won't and gets stuck in the "stick together" bootloader (yes, I am with TMOUS). I did what you suggested but it still won't boot, please help!
paulzhang07 said:
I flashed my HTC Leo to Dutty Multi-lang, when finished and reboot it won't and gets stuck in the "stick together" bootloader (yes, I am with TMOUS). I did what you suggested but it still won't boot, please help!
Click to expand...
Click to collapse
is the multi lang one the one with the base 3.04 rom? that 3.04 base isn't from tmous, have you confirmed it is tmous compatible? (i dont know enough about teh 3.04 rom)
samsamuel said:
is the multi lang one the one with the base 3.04 rom? that 3.04 base isn't from tmous, have you confirmed it is tmous compatible? (i dont know enough about teh 3.04 rom)
Click to expand...
Click to collapse
It is 3.28.4.0
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
samsamuel said:
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
Click to expand...
Click to collapse
And how would you do that if the darn phone won't boot? I can copy a known ROM onto the card, but then how do I flash it from there? Thanks.
paulzhang07 said:
And how would you do that if the darn phone won't boot? I can copy a known ROM onto the card, but then how do I flash it from there? Thanks.
Click to expand...
Click to collapse
no need for sd card,,,boot into boot loader, connect usb, run your flash.
samsamuel said:
sorry, don't know what that means and i can't go hunting right now. it "sounds" like what happens when you flash a non tmous rom to a tmous, (unlike flashing the wrong radio, it doesn't brick the tmous, it just won't boot)
if i were in your shoes, id grab a known tmous compatible rom and flash that.
Click to expand...
Click to collapse
Problem resolved... not sure what caused it but I am a happy man now. This is what I did if this helps with people who might have the same problem.
1. Formated the SD card FAT32.
2. Copy and rename nbh file to LEOIMG.nbh to SD card.
3. Reset the phone while holding the down button. It jumps to bootloader.
4. Hook it with PC, USB is shown on the phone.
5. Download and extract SSPL_RUU.exe and RUU_signed.nbh from Dutty Cream la de Cream ROM into the same folder.
6. Run SSPL_RUU and it came up and running again.
Thanks for your help though, made me feel hopeful because I was getting ready to dump the phone and run over it with my car
no worries, just for info, step two was not needed, it would have tried to flash leoimg at step three if you hadn't been using the stock gig sd card (the 16gb cards don't work, which is why the phone ignored it.)
paulzhang07 said:
Problem resolved... not sure what caused it but I am a happy man now. This is what I did if this helps with people who might have the same problem.
1. Formated the SD card FAT32.
2. Copy and rename nbh file to LEOIMG.nbh to SD card.
3. Reset the phone while holding the down button. It jumps to bootloader.
4. Hook it with PC, USB is shown on the phone.
5. Download and extract SSPL_RUU.exe and RUU_signed.nbh from Dutty Cream la de Cream ROM into the same folder.
6. Run SSPL_RUU and it came up and running again.
Thanks for your help though, made me feel hopeful because I was getting ready to dump the phone and run over it with my car
Click to expand...
Click to collapse
Thanks I did these steps a million times and now Im still in the bootloader screen. What else can I do? Thanks for the help.
im also still with hang with that problem.even tried jteg.but wont successful .bc of i tried to restore from win7 to 6.5. now still set is dead from long time
Hi everyone
I think I killed my hd2 today ( I wanted to have a android, but first I needed HSPL2 and then MAGLDR. So I install HSPL2 this was succesfull but when I install a MAGLDR1.13 my phone should be black with flash..... but it gets white with this HTC logo and thats it, I can't turn it on or off, I can't connect to PC I can't do nothing!!!! can anybody help me. Is any chance?!
agnes12 said:
Hi everyone
I think I killed my hd2 today ( I wanted to have a android, but first I needed HSPL2 and then MAGLDR. So I install HSPL2 this was succesfull but when I install a MAGLDR1.13 my phone should be black with flash..... but it gets white with this HTC logo and thats it, I can't turn it on or off, I can't connect to PC I can't do nothing!!!! can anybody help me. Is any chance?!
Click to expand...
Click to collapse
First off what model of HD2 do you have, is it the Eroupean or T-Mobile US model? What version of HSPL did you install? You need to install HSPL 2.08 to install MAGLD cause MAGLD does not support any higher version of HSPL. If you have installed HSPL 2.08 then it might .e best to just revert your HD2 back to stock and started all over again. To revert back to stock download the latest official update for you HD2. You will have to go to your Carriers website and find the latest update if the update is not on your carriers website then go to HTC.com and look for it there. Once you have downloaded the correct update ROM for your HD2 you can either try to flash it via your computer with your HD2 connected via USB cable or flash it via your SD card. To use your computer while your HD2 is off hold down the volume down button and the power(end button) until you see the tri color screen, this is the bootloader mode. Wait until the serial in the bottom white bar changes to USB and then run the .exe or RUU to flash the ROM. If you can not get the USB to show in the white bar at the bottom for some reason look in the folder created from unzipping/exstracting the zip file that the update comes in and look for something like "RUU_signed.nbh" it might not read exactly like that but it will end in "nbh". Copy this to the root of your SD card and rename it exactly like this "LEOIMG.nbh", this is the only file name the bootloader will except. You may also need to use a micro SD card reader to copy this to your SD card. when you have the file coppied and renamed on your SD card while your HD2 is off hold the volume button and the power(end button) down until you see the bootloader and as soon as it says searching on the screen let go of the volume down button and the ROM should flash this might take a little longer than flashing via your computer so don't freak out if the screen stays black for a while or if the progress bar hangs occassionaly during the flashing. Also if this does not work visit the thread on flashing via SD card cause there is other variables to flashing via SD card like size, class and the way your SD card is formatted. Here is a link to the thread Also after you have flashed the official update ROM you will no longer have HSPL so you will have to reflash it befor trying to teflash MAGLD.
If he has 2.08, their is no need to do it all over again.
mattfmartin said:
If he has 2.08, their is no need to do it all over again.
Click to expand...
Click to collapse
Yesthey could try to reflash MAGLD by manualy putting the HD2 into bootloader. But from what thier post says.
I can't turn it on or off, I can't connect to PC I can't do nothing!!!!
Click to expand...
Click to collapse
So maybe reverting back to stock and starting all over again would be best.
Thank a lot! I try all of this but my phone stays with this colours and nothing is going on
I have a european model hd2 and the HSPL was 2
agnes12 said:
Thank a lot! I try all of this but my phone stays with this colours and nothing is going on
Click to expand...
Click to collapse
If your HD2 will still go to the bootloader than it should be savable. If you tried to flash via your SD card and nothing then either you did not release the volume down button fat enough when searching appeared on the phone screen. Or your SD card is either not compatible to use for flashing, it is not the right class of SD card to flash with, or your SD card is not formatted correctly. I suggest you go to the link I posted in my first post here and read through the thread it will tell you how to solve any of these problems and you can post there in that thread also some one there can probably give you more advice.
If you tried to flash via you computer and USB cable then you have to have it say USB in the bottom white bar of the bootloader, other wise it will not flash the ROM. Also you have to make sure you run the exe or RUU right to flash from your computer.
I hope you can get your HD2 working again. Oh yeah you never said what model HD2 you have.
Also what carrier are you with?
OMG I did it!! hehehe thanks again!! i connect phone via usb to my pc when I had this colours and then I instal again on phone ROM and it works!!!!!!!!!
ufffffffff
agnes12 said:
OMG I did it!! hehehe thanks again!! i connect phone via usb to my pc when I had this colours and then I instal again on phone ROM and it works!!!!!!!!!
ufffffffff
Click to expand...
Click to collapse
Glad to know you got it fixed. Just be carful and follow all instructions exactly if you want to install a NAND Andriod ROM. And make sure to select HSPL 2.08 when you reflash HSPL to your HD2.
I will be installing android ones again tonight, fingers crossed this time will be ok, but first I need to find a rom oldest then 3.14
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Ok try this, turn the phone off then hold the low volume botton n the power botton at the same time, n if it takes u to the bootloader then u r good, just search on how to install a rom of ur choise, good luck
Sent from my HTC HD2 using XDA Premium App
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
Well the fact that it will even turn on means it is not bricked. A bricked HD2 will not even turn on the most it will do is flash tihe led light and vibrait a couple of times.
Follow the instructions of the above post and pull up bootloader, if bootloader comes up you can save the HD2. Depending on if you want to flash a official srock ROM or a custom ROM to the HD2 will dictate your next step.
If you want a official stock ROM then just download and flash the official update from T-Mobile.com just type in HTC HD2 update in the search box on the home page and you will find it. You will have to enter the IMEI number to download it wich you can find this number behind the battery. To flash it connect the HD2 to a computer via USB cable while in bootloader and wait for the serial in the white bar at the bottom of the bootloader screen to change to USB and the computer to show it recognizes the HD2 then run the update utility and follow all the on screen instructions.
If you want to flash a custom ROM as in custom Windows Mobile, NAND Andriod ROM, or Windows Phone 7 ROM then you will have to flash HSPL to the HD2. Download HSPL4 and flash 2.08 HSPL if hou want to flash a NAND Andriod ROM as MAGLDR only supports 2.08 HSPL. Or a Windows Phone 7 Rom, or flash 3.03 if you just want to flash a custom Windows Mobile ROM.
Now if you want a NAND Andriod ROM or Windows Phone 7 you will have to download MAGLDR and flash it to the HD2.
If you want a custom Windows Mobile ROM download the ROM of your choice and fladh it using the .exe or RUU wich ever one the ROM has. Note do all flashing of what I have previously mentioned via the method I mentioned before.
If you are wanting to flash a NAND Andriod ROM or Windows Phone 7 ROM then download the ROM of your coice and flash it using MAGLDR and the instructions of the ROM developer in thread for the ROM.
Now this is very important. I see from the picture you have a T-Mobile(TMOUS) HD2 so no matter what you do, do not flash a ROM with a radio version that reads like these 2.04.50.xx, 2.05.50.xx, or any radio that is x.xx.51.xx they will brick/kill a TMOUS HD2.
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
I would recommend flashing a stock T-Mobile ROM, since that appears to be the flavor of the phone. This will install the correct radio. Once the phone is working, continue as per normal for flashing the ROM. You will have to reinstall hardspl.
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
froibet said:
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
Click to expand...
Click to collapse
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Boradan said:
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Click to expand...
Click to collapse
Try running a Task 29 on your friends HD2. This willtotally clean out the NAND memory of the HD2 and reformat it, kinda sounds like that is what is needed to be done. He may have messed the NAND memory format up when he was trying to install the Andriod. You will have to reflash a Windows Mobile ROM after you run the Task 29 as it will not ha e a ROM on the phone then. You will not have to reflash HSPL cause it will not remove it.
It seems that the problem is RADIO related. I can task 29, and I can install The latest Energyrom, but I CANT install a radio.
There is no radio ON the phone at the minute it seems. When I try to do a radio install, it asks me if I want to go from version ' ' to the update I am using.
None of the installers see a radio on the phone, and trying to install the radio always fails at 96%. This would seem to be the same if I try to install the official TMOUS latest ROM with radio from SD Card. It fails at the radio install part.......
Maybe time for a new thread for this one.......
orangekid said:
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Click to expand...
Click to collapse
i can do all this without connecting to the PC? just flashes from the SD card???
froibet said:
i can do all this without connecting to the PC? just flashes from the SD card???
Click to expand...
Click to collapse
Yes you can flash radio and ROM from your SD card. Here is a link to the thread on doing this gives step by step, check it out.
I've got Android on my NAND, but my HD2's touch screen no longer registers touch. The screen works, but the capacitive sensors don't. I switched to a 2 GB microSD card, and loaded LEOIMG.NBH from T-Mobile's website onto it onto the root directory, with nothing else on the card.
Then I booted into the boot-loader, and it doesn't give me the option to flash the phone.
I need to return this to HTC for warrenty, and I don't know how to restore it.
Any help?
I restored the SD card to FAT32 and it still won't work....
Hello there,
you have to install stock WinMo Rom, check this thread here: http://forum.xda-developers.com/showthread.php?t=623283
This however is from the EU HD2 forum, if you have a TMOUS HD2, please check tha according forum for stock WinMo Roms.
To flash this, you have to boot in the HSPL boot loader (by pushing volume down) and then connect via USB and flash the stock WinMo Rom by executing the file you will have downloaded
Just to be on the safe side, please be advised, that this procedure will delete everything down to HSPL, which however will be necessary, as you are returning your phone for repairs.
Cheech1976 said:
Hello there,
you have to install stock WinMo Rom, check this thread here: http://forum.xda-developers.com/showthread.php?t=623283
This however is from the EU HD2 forum, if you have a TMOUS HD2, please check tha according forum for stock WinMo Roms.
To flash this, you have to boot in the HSPL boot loader (by pushing volume down) and then connect via USB and flash the stock WinMo Rom by executing the file you will have downloaded
Just to be on the safe side, please be advised, that this procedure will delete everything down to HSPL, which however will be necessary, as you are returning your phone for repairs.
Click to expand...
Click to collapse
Awesome. For some reason, I was never able to do that before. I figured out that it was the USB cable that I bought off Ebay that wouldn't allow it to transfer data, but instead only charge.
I was attempting to flash it from SD card.
Now it has Windows Mobile 6.5 on it, but when I boot into BOOT LOADER, it says Cotulla HSPL still on it. Is there a way to remove this? So that it's not "VOIDED WARRENTY" for HTC?
I FIGURED IT OUT. THANK YOU.
I'm trying reinstall WM6.5 on my HTC HD2 from MAGLDR V1.13.
I've downloaded the stock rom from HTC website and im trying run the installer but it fails it cant seem to pick up my phone as a USB connection.
I tried the bootloader way but it always get stuck at the installation part at 0%.
what am i? doing wrong, its driving me mad..
SPL version is SPL-2.08.0000
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
GreatLorens said:
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
Click to expand...
Click to collapse
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
rafter_01 said:
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
Click to expand...
Click to collapse
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
ankushmulay said:
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
Click to expand...
Click to collapse
what ive done so far,
re-installed the hspl 2.08 and then installed the radio 2.15.50.14 from the following site: http://www.addictivetips.com/mobile/how-to-install-hardspl-2-08-on-htc-hd2/
but now at the bootloader im getting the following error 'upgrade ROM code error Please try again"
What have i done wrong???
thanks
flash hspl ... radio ... then mag ... then try the downgrade to winmo
rubledub said:
flash hspl ... radio ... then mag ... then try the downgrade to winmo
Click to expand...
Click to collapse
after the radio, I cannot download magdlr, it stops at 29%.. Or sometimes doesn't do anything!!
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Thanks for this info, will try it. Have you got a link to task 29? Is it a software?
No but it is all over XDA. I think you'll find it someware on the WM 6.5 thread. If that doesn't work your nand will be stuffed but it has allways worked for me!
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Yes, even i suggest you the "flash via micro sd card" method becoz it works in worst cases. and follow all the steps sequencely. good luck
Task29 gives an error 290 and doesn't complete.
Im getting frustrated... What can i do next
task 29 now wipes my phone but everytime i flash a new rom is crashes at 9% or 10% and then i get the error 290.
i downloaded the stock rom for my phone... argggh what can be done?
thanks
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
i must agree with ghost ... sounds like you flashed the poor baby to death :'( sad sad day! and very rare i might add!
GhostXSeries said:
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
Click to expand...
Click to collapse
cannot believe i messed it up.......
know where i can send it for repair? will HTC cover it under warranty? will they be suspicious?
anyone? do i need to ring my phone contract people or go directly to HTC?
Thanks
Depends how old it is. It may need to go directly to HTC to get it fixed.
I read somewhere that error [290]: Invalid Command - the ROM Update Utility has encountered communication errors during the update process.
Try changing the usb cable/connect directly to usb port (not usb hub) if you still want to use usb for flashing.
I always use the sdcard method when there's a problem flashing via usb. Rename RUU_signed.nbh (extract from stock rom exe package) to LEOIMG.nbh and copy the file to sdcard (sdcard MUST be formatted as FAT32 - use HP format tool). Put sdcard into the phone and boot into bootloader mode ... see if it works ...