Database Users

Bootloader no USB?!

Hi all, started to try and get phone onto android last night.
Followed the guide for HSPL3 then started started to update radio but got error about USB!
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
The device boots ok and i get windows (eventualy! if i wait) Once booted into windows USB works but in the bootloader i cant get USB!
I have pressed volume down and red button and in white box it stays on serial!
I have googled for hours any pointers?

GazWales said:
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
Click to expand...
Click to collapse
grey screen, writing in blue? sounds like it thinks you have a rom on your sd card. try it without the sd card in.

Thanks for you suggestion - tired that already should have said.
The issue is fixed however - I took out SIM aswell as SD, manualy booted to loader. Waited 5 min then it changed to USB! Quickly opened HSPL3 an re flashed.
Issue was still the same! So followed same procedure and used HSPL 1.6 that fixed it! I can then flash with a rom suitable for Android!
Flashed 4 min later, put Android on - now loving my new phone - its amazing the difference! This is how the HTC HD2 should have been!

heh, lucky you, i've tried android on 6 different occasions now, first four times i wasted some hours and never got it to boot, 5th and 6th time it worked, but when i restarted, the phone wouldn't restart without a hard reset, so i'm not touching it again for at least another three months.

Thanks. Your solution worked great. As soon as I pulled the SIM and waited a few minutes it popped right up. You should mark this thread title as solved

@samsamuel try using nand its alot easier to install and there are some great builds on this website!
Sent from my Gingerbreaded HTC HD2 using XDA App

Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.

klumpbatsch said:
Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
Click to expand...
Click to collapse
Mate, check my suggestion at your other post (you started a new thread today!)

HTC HD2 rom change with non working screen

Hello Everyone.
TBH im my opinion you guys are my last hope to fixing my hd2.
So here's the problem.
I have a HD2 that turns on but does not have a functioning touc screen.
ABOUT MY PHONE:
HTS HD2
Has old android in it ( I dont know which one it is, but i can describe it. It starts up with a BootLoader asking to boot android, so i have the option to press yes or no. It has old blue theme in the background.
Here's the problem. I've called HTC support and i learn my phone still has manufacturers warranty. So basically i can just send in the phone, and ill id have to pay is shipping. BUT! here's the problem. HTC does not approve of third party software installed in the phone, in my case it is the ANDROID. So now im trying to wipe android put, and install windows mobile again. I downloaded the t-mobile stock rom and when i plug in my phone, the windows mobile center automatically pops out but it shows an error symbol.
TL;DR
So my question to you guys is how do i remove Android and install Windows Mobile on an HTC HD2 with a non working screen
Thank you so much guys for even considering to help me
Mod if i posted on the wrong section could you please move it for me.
Thanks

hi,
try this:
http://forum.xda-developers.com/showthread.php?t=956715

Thanks so Much But here's an update
I went ahead and downoaded the HSPL3
I turned on my phone and also pressing the voulme down button which brought to me to a red green and white color. I had my phon conneceted to the computer VIA USB. I first double clicked the T-Mobile rom update thingy and went ahead accpeted the warning signs etc,so the first thing that came up was identifying phone, and after 5 seconds it disappears so nothing came fro that, then later i double clicked the HSPL3 which asked me to either pick the 2.8 or the the 2.8 spl i believe, i had the spl installed so i wen ahead clicked the 2.8. it installed and my phone rbooted and BAM my touch screen worked, and when it asked to boot android i pressed NO. my phone rebooted and iagain the boot loader came up and asked to bott android, so this time i pressed BUt it didnt work because the touch screen stopped working!
So i went ahead to try everything all over but this time i clicked the 2.8 spl and after a minute on my phone it displayed " we hacked it" etc etc etc, i robooted my phone, ad it worked, i turned it on and off twice and it worked i was using my phone after a month So after playing with it alittle bit i decided to put my sim card in it. I turned off the phone and put the Sim card and turned on the phone so i can use it but.....once again the touch screen stopped working... ****!!!!!!

yep, now the touchscreen is once again not working

bump bumpity bump

fusion1204 said:
bump bumpity bump
Click to expand...
Click to collapse
Download a stock WM ROM for your phone, extract and rename your .nbh to leoimg.nbh. Transfer leoimg.nbh. to your SDcard.....enter bootloader mode....there it will flash back to your WM ROM with all HSPL remove. Time to send back to Manufacturer for repair..

Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?

fusion1204 said:
Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?
Click to expand...
Click to collapse
extract that from your .exe file.
Stock ROM can be found here
http://forum.xda-developers.com/showthread.php?t=655653
Make sure you use the Stock ROM specific for your phone, else you will brick your phone.

I went ahead and did that, but nothing changed did i do something wrong?

fusion1204 said:
I went ahead and did that, but nothing changed did i do something wrong?
Click to expand...
Click to collapse
Try following this guide....
http://forum.xda-developers.com/showthread.php?t=681317

10507 Thank you for the links but it didn't wok for me.
UGh!
Am i doing something woring? i mean i can get to the screen where it shows the foru colors, i guess that would be flashing and once i get there i can't do anything else the only way for me to do anything while im on that screen is if i have it connected in with my computer, and also start runinng the HSPL program which switches from Hspl to a NON hspl vice versa.
I hope youre not tired of me lol!
please help me out with this stupid situation im in.
Thank you.

Bumpity bump please help me out

Focus 1.3 Stuck at Samsung Logo - Looks like endless reboot loop

My 1.3 focus is stuck in the Samsung logo screen. It lloks like it is in an endless reboot as the logo will go away for a moment then reappear.
I am able to get the phone into Download and Format mode with out issue.
I have also been able to succesfully reflash the original firmware without issue, but the same result none the less.
Any ideas on this?
I had put the mi7 ROM on which worked fine. This morning phone was stuck on the logo. I reflashed the mi7 without issue as well before trying the original Samsung ROM

Hi Guys
i have this same problem with my focus its also ver 1.3
i had an error on the mango update (usb cable bad apparently) according to the code, and after the failed update the phone was acting stupid and cutting out when it wants so i flashed the phone with the rogers rom, and it worked fine attempted to do the mango update again in a diff usb port and got the same error so i went to reflash the phone again so i could get my mate to try his cable the flash seemed to go through with no issues until the first reboot, then instead of getting the connect to computer screen i just got the samsung logo flashing up then restarting and flashing the samsung logo again i have tryed to flash again with diff versions of the tool and original rom and rogers rom many times but still get the same thing the only strange thing is that i cant get into the hard reset mode i can get into download mode fine but not format it just flashes back to the same flashing samsung screen Please Help or is the phone Buggered at a wild guess iv got a problem with the internal memory ??? Lost and need help

same here, please help

amitbhavi said:
same here, please help
Click to expand...
Click to collapse
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?

EnderPsp said:
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?
Click to expand...
Click to collapse
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop

reycarp said:
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop
Click to expand...
Click to collapse
I see. You're the 4th person I encounter having this problem after flashing magldr. You should ask in the magldr thread. I'm not sure if it's really magldr related but I don't see anything else that could cause it...
Make sure you specify there your revision(3/4)/ as well as OS version.

[Q] BLINKING SAMSUNG LOGO

Hi,
My phone was working absolutely normal for about a year but suddenly yesterday morning I found it stuck on 'BLINKING SAMSUNG LOGO'. I left it on charge overnight. It was absolutely shocking and I did everything possible to wake it up but It didnt show up. I did Hard Reset a multiple times, tried to unplug USB cable, battery back and forth, but it was of no help.
I found this question on various forums but unfortunately, no one came up with a positive solution except replacing it under warranty. I came back to Pakistan and phone is it out of warranty so there is no possibility for that.
Yesterday, I performed STOCK ROM flash. Luckily I managed to put it WP 7 and so far it is working fine. Later I updated it through ZUNE and during a hour download/installation, I expected it to install WP 7.5 but it popped up the same logo again. I tried everything but problem remains the same. Im stuck on 8th step out of 9 i.e. restarting your phone. I flashed back again to 7, then tried again, but same logo appears back and blinks
It clearly seems like wp 7.5 has some software issues in the bootup. Is there any direct WP 7.5 ROM available on internet?
What else should I do to fix it?

MicroSD Card
Ramzoun said:
Hi,
My phone was working absolutely normal for about a year but suddenly yesterday morning I found it stuck on 'BLINKING SAMSUNG LOGO'. I left it on charge overnight. It was absolutely shocking and I did everything possible to wake it up but It didnt show up. I did Hard Reset a multiple times, tried to unplug USB cable, battery back and forth, but it was of no help.
I found this question on various forums but unfortunately, no one came up with a positive solution except replacing it under warranty. I came back to Pakistan and phone is it out of warranty so there is no possibility for that.
Yesterday, I performed STOCK ROM flash. Luckily I managed to put it WP 7 and so far it is working fine. Later I updated it through ZUNE and during a hour download/installation, I expected it to install WP 7.5 but it popped up the same logo again. I tried everything but problem remains the same. Im stuck on 8th step out of 9 i.e. restarting your phone. I flashed back again to 7, then tried again, but same logo appears back and blinks
It clearly seems like wp 7.5 has some software issues in the bootup. Is there any direct WP 7.5 ROM available on internet?
What else should I do to fix it?
Click to expand...
Click to collapse
Hi, if you have a microsd card installed it may be the problem, remove the card, do a hardreset, then reflash your handset and try to upgrade to Mango then see what happens, if all is good then your microsd is faulty, this happened to a lot of focus users ))

Doesnt load wp.7.5 mango
VSparxx said:
Hi, if you have a microsd card installed it may be the problem, remove the card, do a hardreset, then reflash your handset and try to upgrade to Mango then see what happens, if all is good then your microsd is faulty, this happened to a lot of focus users ))
Click to expand...
Click to collapse
I actually removed my SD card since beginning installation. Any other possibility?

7.8 ROM
Should I try to update a 7.8 ROM over this 7.0.7004 OS Version??

You can tray
Ramzoun said:
Should I try to update a 7.8 ROM over this 7.0.7004 OS Version??
Click to expand...
Click to collapse
You will ned to install a custom bootloader for installing a custom ROM, but if you handset is under warranty I would fully recommend taking it to the service as I doubt your problem will magically disappear with a custom ROM, and there is a big chance of bricking the device when installing a custom bootloader if your device is problematic.

Please somebody help!
I have updated it twice but the problem pops up same in the end. It keeps on blinking the logo.
My current version is 7.0.7008. everytime I connect it to zune, it updates on request to 7.5 add on but Im stuck.
Please somebody help me, I have bought a used phone and out of warranty. What can I do to restore it back to WP 7.5.?

Ramzoun said:
I have updated it twice but the problem pops up same in the end. It keeps on blinking the logo.
My current version is 7.0.7008. everytime I connect it to zune, it updates on request to 7.5 add on but Im stuck.
Please somebody help me, I have bought a used phone and out of warranty. What can I do to restore it back to WP 7.5.?
Click to expand...
Click to collapse
What logo does it blink ? The Samsung one or the pc connection ?

OP, Sir next time title your thread Thanks, I did it for you...

[Q]Stuck in "smart mobile"(Edit3.5)HELP REALLY NEEDED.

Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!

Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.

chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?

masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.

chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.

masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.

(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship

Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you

Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.

Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards

CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!

Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone