Hi all, started to try and get phone onto android last night.
Followed the guide for HSPL3 then started started to update radio but got error about USB!
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
The device boots ok and i get windows (eventualy! if i wait) Once booted into windows USB works but in the bootloader i cant get USB!
I have pressed volume down and red button and in white box it stays on serial!
I have googled for hours any pointers?
GazWales said:
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
Click to expand...
Click to collapse
grey screen, writing in blue? sounds like it thinks you have a rom on your sd card. try it without the sd card in.
Thanks for you suggestion - tired that already should have said.
The issue is fixed however - I took out SIM aswell as SD, manualy booted to loader. Waited 5 min then it changed to USB! Quickly opened HSPL3 an re flashed.
Issue was still the same! So followed same procedure and used HSPL 1.6 that fixed it! I can then flash with a rom suitable for Android!
Flashed 4 min later, put Android on - now loving my new phone - its amazing the difference! This is how the HTC HD2 should have been!
heh, lucky you, i've tried android on 6 different occasions now, first four times i wasted some hours and never got it to boot, 5th and 6th time it worked, but when i restarted, the phone wouldn't restart without a hard reset, so i'm not touching it again for at least another three months.
Thanks. Your solution worked great. As soon as I pulled the SIM and waited a few minutes it popped right up. You should mark this thread title as solved
@samsamuel try using nand its alot easier to install and there are some great builds on this website!
Sent from my Gingerbreaded HTC HD2 using XDA App
Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
klumpbatsch said:
Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
Click to expand...
Click to collapse
Mate, check my suggestion at your other post (you started a new thread today!)
Related
--------------------------------------------------------------------------------
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
dineshkumaar said:
--------------------------------------------------------------------------------
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
Click to expand...
Click to collapse
Try to reflash with another ROM
And maybe your battery is not working
Good luck and don´t forget to vote!
Im new to this forum and spending a few weeks doing searches I have found a new world of things I can do with my M5000! Only problem is I have the same problem as this guy. The problem started with no GSM, No Protocol version and no IMEI number, After countless rom installs and failed all I thought I left the sim in? Took batt out, No sim, Put the batt back in and now it wont turn on or do anything.
Has anyone found a solution to this problem or its it an expensive paper weight?? Im lost without it!
ronnie5 said:
Im new to this forum and spending a few weeks doing searches I have found a new world of things I can do with my M5000! Only problem is I have the same problem as this guy. The problem started with no GSM, No Protocol version and no IMEI number, After countless rom installs and failed all I thought I left the sim in? Took batt out, No sim, Put the batt back in and now it wont turn on or do anything.
Has anyone found a solution to this problem or its it an expensive paper weight?? Im lost without it!
Click to expand...
Click to collapse
Welcome to the forum
You have a great device!
Have a look here:
http://forum.xda-developers.com/showthread.php?p=3999833#post3999833
Hope it helps and good luck,
Hello all,
I'm not sure but i think my blackstone is on its last legs.
It all started after i flashed to Dutty's last rom the r15 one. Did the usual uspl and eveything went to plan. Then about a week ago the phone frooze, i could'nt get it to reset so had to take the battery out (no biggy). Then tried turning it back on, and it just frooze again right at the windows start-up screen. So did a hard reset and the phone seemed very slow and jumpy.
Then i thought maybe the download of dutty's rom wasn't the best. So today i had planned to install a different rom and see if it was just a bad download or sumthing. And heres the big problem, i can't get the bootloader to connect to my pc.
And what seems strange is that when i enter the bootloader it flashes up with the re/green/blue/white screen andt ehn it shows a grey screen with "loading......." for about 10 seconds then comes back the normal bootloading screen. As usual serial pops up at the bottom, but when connected to my pc it won't show USB!!
I have win7 64, but i have set it up so i can flash using USPL as thats how i got dutty's R15 rom on there.
Any help would be great and hopfully i can get this sorted swn as i love my hd.
p.s
i've spent the past 2 hours searching here and havent found anyone with the same problem.
Thanks
Antony
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
i am now installing the stock rom.
hopefully then i wil be able to install a cooked rom again.
berbecverde said:
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
Click to expand...
Click to collapse
Thanks for the help,
I will see what the outcome is from the stock rom. And if i can't get it working again with win7 then i'll have to set up my mini pc (made a pc inside an old nintendo SNES) as thats got xp running
thanks once again
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
berbecverde said:
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
Click to expand...
Click to collapse
Well after more hours spent reading thro web page after web page, i stumbled over someone saying that it could be down to the usb cable and i have a few mini usb one, so tried them all, finally got the bootloader to show the usb.
I was then going to install a cooked rom, but thought i'd be the best to go for stock first.
All is working ok now. I'm not sure if it was down to the usb cable totally tho as it was a bit strange the whole grey loading screen on the bootloader which has gone now with the stock rom.
ah well looks like its fixed for now.
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
When you turn on your phone what happens? What screen dow it take you to? What does it say when trying to run android? .......and for future notice this is the comnplete wrong section for this....and some more info regarding device, hspl, radio would be helpful too.
oh word? ... try this
1..first download the official wm 6.5 rom from tmobile or http://www.htchd2forum.com/general-...SID=799c9ce6abe4e3ddc05368f8432db509#msg22469
2...second remove the SD card and connect the phone to ur computer
3...hold the down volume + power buttom till u see 4 colurs and them run the tmobile official rom... let me know what happens
it doesn't boot up anymore, I will post again when I have it booting again.
All have to do is to download an htc official rom and connect ur Htc hd2 to
computer and flash it
Good luck
Sent from my HTC HD2 using XDA App
phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
connect the phone to ur computer
hold the down volume + power button till u see 4 colors and them run the tmobile official rom... let me know what happens
In the name of the wee man.
Post this in the right bloomin' topic.
The Mods have just spent an age reorganising this whole corner of XDA and what do you do?
Bugger it all up.
Well done.
At least you are consistent, you buggered your phone and the forum. Bravo.
phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
Can you seriously follow anyone's instructions given man? Quit trying to boot the phone. Connect the phone with your PC via the USB cable. Hold down the "volume down" key and the "power" key at the same time. Tell us if you see the tri colored screen.
phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
Have you checked the battery contacts? They bend very easy, and the symptoms you describe are exactly those of that. If they are bent, VERY, OH SO VERY CAREFULLY straighten them up. If one or more are broken, I hate to tell you this, but you need to buy a new phone.
phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
I think you have wrongly done the Clock Work Mod which shows the 123Fatal Hit error and ur hd2 remains stuck there. Your HD2 is not crashed at all just charge it with an external charger then go to bootloader by pressing n holding Volume Down key and Power button until you the triple coloured screen, then connect your data cable to HD2 and flash it with a stock windows mobile rom so it will restore ur hd2 and after that u can install nand rom on it by following each and every step mentioned in tutorials here. Whenever I select boot AD SD after flashing partition layout I always get 123Fatal error now I don't understand what the problem is....If someone has a solution for this problem please reply in this thread as I don't want flashing through DFT method.
before i begin - im a complete newb at this stuff so please bare with me as im very confused. i was following this tutorial http://forum.xda-developers.com/showthread.php?t=893948 and i got to the pont where i had flashed magldr onto my hd2. but instead of booting up after it was done - it got stuck on the o2 splash screen. Only bought the phone yesterday so im a little anxious. ive tried resetting settings by holding the 2 volume buttons down while i press the power button but that didnt do anything. any help appreciated.
UPDATE: ok ive managed to flash a stock rom onto the hd2 and got it working again. ive upgraded to the latest o2 uk rom. but id stil like android on the device. Does anyone know why magldr might have crashed the phone? the phone is locked to o2 so is that a problem?
nextman6515 said:
before i begin - im a complete newb at this stuff so please bare with me as im very confused. i was following this tutorial http://forum.xda-developers.com/showthread.php?t=893948 and i got to the pont where i had flashed magldr onto my hd2. but instead of booting up after it was done - it got stuck on the o2 splash screen. Only bought the phone yesterday so im a little anxious. ive tried resetting settings by holding the 2 volume buttons down while i press the power button but that didnt do anything. any help appreciated.
Click to expand...
Click to collapse
What are the steps have you done? Basically flash HSPL to root your phone. Then flash MAGLDR. After these two you can start going to build to pick the ROM to flash.
i went back to the beginning and did everything again - i hadnt updated my radio version, which is why it was getting stuck. but the second time round everything seems to have worked fine - i now have boyppcs gingerbread rom installed. my advice to others - always READ THE INSTRUCTIONS CAREFULLY. now if only i could work out how to get that cool 3d effect on the homescreen
dont have a clue how to use magldr
How do you work it?
iiadore said:
How do you work it?
Click to expand...
Click to collapse
Again as I said in reply to your post asking what CWM is click on my guide I have linked in my sig and it will tell youi what MAGLDR iswhat each option is and what it does. I give a run down on HSPL, MAGLDR, cLK, CWM, and radio information. Plus I give detailed instructions on how to install them, plus links to where you can download them.
Help - frozen HD2
Hi
as per nextman6515, my HD2 is stuck on the o2 screen and despite numerous hard resets, it will not go beyond the 02 screen, I cannot get to the multi-colour screen anymore (volume up and power), I cannot get the phone recognised on usb or windows activesync, does anyone have any advice on getting my phone to work again, all advice will be gratefully received.
thanks
r18ball said:
Hi
as per nextman6515, my HD2 is stuck on the o2 screen and despite numerous hard resets, it will not go beyond the 02 screen, I cannot get to the multi-colour screen anymore (volume up and power), I cannot get the phone recognised on usb or windows activesync, does anyone have any advice on getting my phone to work again, all advice will be gratefully received.
thanks
Click to expand...
Click to collapse
into bootloader
connect usb lead
ignore the red bit about activesync, so long as it says usb at the bottom of the screen in bootloader, it is fine.
flash a magldr compatible radio (look it up!)
Once magldr is working, you will need to go into activesync and untick 'allow usb connections' ((or maybe thats only for windows mobile device center, , anyone?)) before you can then start using usb for android based flashing.
done.
Hello guys,
Before getting frustrated about just another noob; No, I know the stuff with the volume down button, but it doesn't work (anymore) for me. I'm a noob but not a retard.
I have a very strange and frustrating problem. Like many of you I wanted to install Android 2.3 on my HTC HD2. Unfortunately I'm quite stuck. I did put radio 2.15.50.14, the 2.08.HSPL (with HSPL3_PKG), MAGLDR 1.13 and CWM (MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M) on my device, but when I tried to install the ROM via AD Recovery the device didn't show the menu and got stuck on "go go go". That's bad, but even worse is that I couldn't enter the tri-color screen to connect via USB and restore the original stock ROM. However I did manage to boot the "Stock Android" (NAND). Only way I can still flash is via USB Flasher. I read something about cabine (.cab) files that could somehow get you in the boot loader on other HTC devices, but can't find any for the HD2.
Anybody has any idea how I can enter the bootloader and restore my original Windows Mobile?
I have been searching for hours now. I have found similar problems, but no answers are given that can solve my problem.
I hope you smart guys can help me out. Is there maybe any way that I can run Windows Mobile the "NAND-way", to connect to Windows Mobile Device Center and flash my device?
Thanks in advance,
Stef van Son
This morning I just tried the volume down again, after the phone was in the MAGLDR menu the whole night. And now i could make it to the bootloader for some strange reason. Does anybody has an explanation for this?
I'm back to Windows Mobile now and have had it with flashing for now, but maybe after my exams I will go for Android again (I hate WinMo).
StefHD2 said:
This morning I just tried the volume down again, after the phone was in the MAGLDR menu the whole night. And now i could make it to the bootloader for some strange reason. Does anybody has an explanation for this?
I'm back to Windows Mobile now and have had it with flashing for now, but maybe after my exams I will go for Android again (I hate WinMo).
Click to expand...
Click to collapse
You might want to use some of the instructions in my signature... Also check out the CoreDroid thread, we have some pretty good instruction there. Usually if you pull you battery, then turn on your phone while holding vol down button, it will boot directly into the rainbow screen.
Well, I did follow quite good instruction manuals, but at the step of flashing the new rom, my device just didn't do what it was supposed to. It's quite strange, because WinMo 6.5 just works perfectly.
And no, pulling the battery out I tried probably a hundred times...