after i install cm-10-20121125-UNOFFICIAL-mb526.zip
I got this error message after starting the galerie app (camera even too)
This is the first time I get this error.
i have defy plus 526
You installed 4.2 CM10.1 on defy. Search in developer section [JB+] CM10.1 you'll find how to mount sdcard, but in not permanent, you'll need redo this after reboot. I suggested you to go back to CM10 - it's for daily use.
tnks
thanks but i still have the probleme
mx- said:
thanks but i still have the probleme
Click to expand...
Click to collapse
Downgrade to CM10 11/28 build 4.1.2, CM10.1 build is not for daily use.
thanks
its works very good
i have defy + green lesn camera work very very good
thank you
Related
Hello everyone
So yesterday i flashed this CM7 build cm72-111212.1201-NIGHTLY-Defy+.zip and today i was going to take a picture just to find out that my camera force closes everytime i try to launch it.Any solutions for this?
I flashed it over stock 2.3.5 if that helps...
No one knows? I tried reflashing and that didnt work...When i try to run it i get camera(process com.android.camera) has stopped unexpectedly and force close button.BTW my battery stops charging at 88%,anyone knows whats up with that?
I suggest flashing a new CM7.2 Nightly build for defy+
from this great thread http://forum.xda-developers.com/showthread.php?t=1458729 i found:
12-01-27 Epsylon7/Defy+:
cm72-120127.0846-NIGHTLY-Defy+ link: http://www.defy-cm.net/defy_plus-cm7-nightly/
and AL's posted Defy+ fixes for camera and battery etc http://forum.xda-developers.com/showpost.php?p=21875699&postcount=15069
I flashed this over a stock Defy+ 2.3.4 4.5.1-134_DFP-74
Thanks for your reply i always thought i had the latest one since it was the first on the list...well i gotta pay more attention to dates
EDIT:Everything works now,thanks again...
defy plus
Hey,
Even i have a defy plus with 2.3.4 rom...and kernel 2.6.36.9 ....planning to flash the latest defy plus nightly.....
I have rooted and installed 2ndinit and took a nandroid backup of my rom sucessfully.....so whats the next step??
Do i need to install anything else before installing the defy plus nightly??
And what are the features it enables??
Does it provide 720p video recording and playback??
Newbie here. please help.
Thanks.
if you installed 2ndinit and booted to CWM-recovery ... and you already have a nandroid backup of your device, you only have to install the zip from sdcard and you are ready to go (maybe you need to flash fixed-sbf with the kernel for cm7) ...
hi ganesh0992,
slstr above has given good links regarding flashing CM7.2 on defy plus. I am running the same build of CM7.2 cm72-120127.0846-NIGHTLY-Defy+. you should follow those instructions and don't forget to apply battery/camera fix.
720p capability is not supported in this ROM by default, you will need to apply a different patch, i don't know if one exists for CM but there is one for STOCK rom and another rom (mginger), google it. (CANT POST LINKS NEW USER!!)
ganesh0992 said:
Hey,
Even i have a defy plus with 2.3.4 rom...and kernel 2.6.36.9 ....planning to flash the latest defy plus nightly.....
I have rooted and installed 2ndinit and took a nandroid backup of my rom sucessfully.....so whats the next step??
Do i need to install anything else before installing the defy plus nightly??
And what are the features it enables??
Does it provide 720p video recording and playback??
Newbie here. please help.
Thanks.
Click to expand...
Click to collapse
Dude you need the Camera fix and Battery fix...flash those.
Sent from my MB526 using XDA
xCode195 said:
Hello everyone
So yesterday i flashed this CM7 build cm72-111212.1201-NIGHTLY-Defy+.zip and today i was going to take a picture just to find out that my camera force closes everytime i try to launch it.Any solutions for this?
I flashed it over stock 2.3.5 if that helps...
Click to expand...
Click to collapse
This is a known problem in the nightly you used! Use Quarx nightlies. They are better and more updated!
Hi
My device: Motorola Defy CyanogenMod 7.2 off st bootmenu 2.0.0, multiboot defy 0.5 (2.2.2, Poland, green camera SOC, JRDNEM_U3_3.4.2_179 deodex, radio EPU93_U_00.59.01)
I try to install WIUI (2.4, 2.5, 2.6) from different sources on Multiboot (cache - 150mb, data - 750mb, system - 350mb) more than 15 times. Doesn't work:
2.4-2.5 - black screen
2.6.15,16,22 - first load, work screen, reboot and than cyclic reboot from the boot animation
CM7, CM9, MIUI 2.4 work fine
Flash yesterday JRDNEM_U3_3.4.2_179 deodex - didn't help
Help me please.
P.S. I do not have enough posts to post in the topic of firmware WIUI
Is there anyone in the house?
up
Does it boot without multiboot?
Sent from my MB526 using XDA
I didn't try because I need stable main firmware with all working functions for all days using. Now it's CM7.2
up
Maybe issue with multiboot.
Wiui GB is very stable. go for it. Its based on CM 7.2
Do you have installed multi boot manager? Look up if something is wrong (written in red), this is an bug i had sometimes. But will try it if its working on an other defy.
- So 2.6.8 is working s virtual for me the other version will test later
kadavil said:
Maybe issue with multiboot.
Wiui GB is very stable. go for it. Its based on CM 7.2
Click to expand...
Click to collapse
At the Russian-speaking forum, no one is loaded on multiboot. I want to try, but don't want to flash on Nand.
Do you have installed multi boot manager? Look up if something is wrong (written in red), this is an bug i had sometimes. But will try it if its working on an other defy.
Click to expand...
Click to collapse
Yes, I have. CM7, CM9, MUIU work fine.
I even flashed MIUI 2.4 and than flash WIUI 2.6 over MUIU 2.4. Didn't help
Check the md5 sum? Sometimes i got trouble because the zip wasn't complete. And file size was 0kb.
Sent from my MB525 using XDA App
Thank you for advice.
But I tried more than 15 different files.
I try to install WIUI (2.4, 2.5, 2.6) from different sources on Multiboot (cache - 150mb, data - 750mb, system - 350mb) more than 15 times. Doesn't work:
2.4-2.5 - black screen
2.6.15,16,22 - first load, work screen, reboot and than cyclic reboot from the boot animation
Click to expand...
Click to collapse
up
Hello,
I have a problem, recently i installed cm10 on my motorola dy (MB525).
And CM10 use all my ram memory, so I almost can not use application.
Do you have an idea to fix this bug.
And what is the difference between the CM10 and Quarx epsylon?
(sorry for my english i'm french)
thelink974 said:
And CM10 use all my ram memory, so I almost can not use application.
Do you have an idea to fix this bug.
Click to expand...
Click to collapse
Android as a system works better when it has very little RAM because it freezes activities in RAM like Messaging and then restores the instance when you open Messaging. If you have problems with RAM further than this go to Developer Options>Background Process Limit and change it to 3 or 4 and reboot which should free up some more RAM.
thelink974 said:
Hello,
I have a problem, recently i installed cm10 on my motorola dy (MB525).
And CM10 use all my ram memory, so I almost can not use application.
Do you have an idea to fix this bug.
And what is the difference between the CM10 and Quarx epsylon?
(sorry for my english i'm french)
Click to expand...
Click to collapse
Wipe Data (factory reset) from Stock recovery.
CM10 is the generic ROM - quarx and epsylon make specific builds for the Defy.
Try wiping data using CWM recovery that came with CM10
reflash your rom
boot it once.
reboot to CWM and install Gapps.
reboot and see if something changed about RAM consumption.
I am running CM10 latest Quarx build on my Defy+ with bl7 after installing the update, menu button light is not working :crying: Is there any way to get it back I tried rolling it back to the CM7 but no use. Any help is really appreciated. Sorry for my bad English...!!
I have the same problem, and the exact same button
I think the led behind that button is not working anymore...
Try to install the CM as indicated in the topics (respect the steps). Do it from begining carefully (flash the stock ROM).
Same here
Sent from my MB526 using xda app-developers app
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
hacktheheaven said:
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
Click to expand...
Click to collapse
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Thanx for the reply
pgreed said:
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Click to expand...
Click to collapse
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
hacktheheaven said:
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
Click to expand...
Click to collapse
I think the high brightness settings would have burned it
Then there is no way to get it back......!! Wish I didn't mess with that settings....
Sent from my MB526 using xda app-developers app
hacktheheaven said:
Wish I didn't mess with that settings....
Click to expand...
Click to collapse
I didn't messed with buttons lights, and still got 3 burned LEDs. The first to go was "search". A month after that, the "menu" button went dark. Now the "back" is gone too. Just "home" remains with light. I don't think it's a software issue... More likely a project flaw or bad manufacturing (I still use CM7, no tweaks).
Last week I also got a "stain" (a lot of bad pixels) on the center of the screen. Just turned the phone off and put it in the freezer for 12 hours. After that, it was new again (lucky me). Yeah, the famous trick works folks (unfortunally, not for the capacitive LEDs though).
Floripa said:
I don't think it's a software issue... More likely a project flaw or bad manufacturing
Click to expand...
Click to collapse
I'm inclined to agree. It seems fairly common. My menu button LED failed when my Defy+ was around 6 months old and completely stock. I put it down to a hardware failure.
Time for me to claim the Warranty
I will unroot the device and will claim the warranty...!! :good: But only problem is I have to wait untill the device returns back and have to use that ****sung again sorry Typo Samsung* :crying:
Hello Guys!
Today I successfully installed the new MS2Ginger 5 ROM on my Defy BL7 and I was surprised, because THE CAMERA IS WORKING!!!!!!!!
I am wondering about can anyone crreate a flashable zip from the new MS2Ginger ROM including the SOC and Bayer camera files for BL7 users who want to use CM7???
In my opinion a lot of users would really apprechiate it :angel:
Camera Work on any custom kernel 2ndboot Roms`s ( quarx CM10 & CM10.1 and ...)
jalal-jap said:
Camera Work on any custom kernel 2ndboot Roms`s ( quarx CM10 & CM10.1 and ...)
Click to expand...
Click to collapse
But not on CM7
4.2.2 camera installation help
Hi guys ...
Just wanted to install the 4.2.2 camera/gallery in my defy....
i've been following this thread
http://forum.xda-developers.com/showthread.php?t=1965259
but was not abe to do it .... in fact i ended up removing gallery and camera
but i managed to install the keyboard
Please any1 .. any ideas ...
i am using CM10 by quarx 09.04 2ndboot
Try this
ibtihaaz said:
Hi guys ...
Just wanted to install the 4.2.2 camera/gallery in my defy....
i've been following this thread
http://forum.xda-developers.com/showthread.php?t=1965259
but was not abe to do it .... in fact i ended up removing gallery and camera
but i managed to install the keyboard
Please any1 .. any ideas ...
i am using CM10 by quarx 09.04 2ndboot
Click to expand...
Click to collapse
Download from here - http://forum.xda-developers.com/show....php?t=1965895
Flash through cwm, rename gallery2.apk to gallery2.bak, check permissions, reboot. If camera doesn't show in launcher then clear cache of gallerygoogle, reboot...If camera is laggy then disable hwa for it. This worked for me, but saving an editing picture gave a FC...
Hope this helps...
Link !!
hotdog125 said:
Download from here - http://forum.xda-developers.com/show....php?t=1965895
Flash through cwm, rename gallery2.apk to gallery2.bak, check permissions, reboot. If camera doesn't show in launcher then clear cache of gallerygoogle, reboot...If camera is laggy then disable hwa for it. This worked for me, but saving an editing picture gave a FC...
Hope this helps...
Click to expand...
Click to collapse
Thank for reply m8... but link is not working
Pliz chk it for me thanks
Hello.can ask me some question？what is SCO and Bayer Camera？
Sent from my ME525~Chinese 2.3.6
Driver difference
Pason said:
Hello.can ask me some question？what is SCO and Bayer Camera？
Sent from my ME525~Chinese 2.3.6
Click to expand...
Click to collapse
Hi there .. i think the SOC=Green lens Camera ........... Bayer=Red lens camera
They uses different drivers to be able to work ...
if you flash SOC with Bayer drivers .. camera will not work .... if you flash Bayer with SOC drivers.. camera with not work
I think its something like this
will try
ibtihaaz said:
Hi there .. i think the SOC=Green lens Camera ........... Bayer=Red lens camera
They uses different drivers to be able to work ...
if you flash SOC with Bayer drivers .. camera will not work .... if you flash Bayer with SOC drivers.. camera with not work
I think its something like this
Click to expand...
Click to collapse
will try and let u know
The link is broken, Bro
How to install plz mention procedure
Hi bro Plz explain me the whole procedure. I had flashed the zip but got stuck on moto logo.
ToMpI97 said:
Hello Guys!
Today I successfully installed the new MS2Ginger 5 ROM on my Defy BL7 and I was surprised, because THE CAMERA IS WORKING!!!!!!!!
I am wondering about can anyone crreate a flashable zip from the new MS2Ginger ROM including the SOC and Bayer camera files for BL7 users who want to use CM7???
In my opinion a lot of users would really apprechiate it :angel:
Click to expand...
Click to collapse