I am running CM10 latest Quarx build on my Defy+ with bl7 after installing the update, menu button light is not working :crying: Is there any way to get it back I tried rolling it back to the CM7 but no use. Any help is really appreciated. Sorry for my bad English...!!
I have the same problem, and the exact same button
I think the led behind that button is not working anymore...
Try to install the CM as indicated in the topics (respect the steps). Do it from begining carefully (flash the stock ROM).
Same here
Sent from my MB526 using xda app-developers app
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
hacktheheaven said:
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
Click to expand...
Click to collapse
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Thanx for the reply
pgreed said:
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Click to expand...
Click to collapse
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
hacktheheaven said:
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
Click to expand...
Click to collapse
I think the high brightness settings would have burned it
Then there is no way to get it back......!! Wish I didn't mess with that settings....
Sent from my MB526 using xda app-developers app
hacktheheaven said:
Wish I didn't mess with that settings....
Click to expand...
Click to collapse
I didn't messed with buttons lights, and still got 3 burned LEDs. The first to go was "search". A month after that, the "menu" button went dark. Now the "back" is gone too. Just "home" remains with light. I don't think it's a software issue... More likely a project flaw or bad manufacturing (I still use CM7, no tweaks).
Last week I also got a "stain" (a lot of bad pixels) on the center of the screen. Just turned the phone off and put it in the freezer for 12 hours. After that, it was new again (lucky me). Yeah, the famous trick works folks (unfortunally, not for the capacitive LEDs though).
Floripa said:
I don't think it's a software issue... More likely a project flaw or bad manufacturing
Click to expand...
Click to collapse
I'm inclined to agree. It seems fairly common. My menu button LED failed when my Defy+ was around 6 months old and completely stock. I put it down to a hardware failure.
Time for me to claim the Warranty
I will unroot the device and will claim the warranty...!! :good: But only problem is I have to wait untill the device returns back and have to use that ****sung again sorry Typo Samsung* :crying:
Related
Just installed "CyanogenMod-7 for ZTE Blade (Orange San Francisco) :: V7.0.0-RC4 (30/03/2011)"
Firstly, many thanks for making this great rom. Instructions very easy to follow, even I could do it (my first smart phone, only had it 5 days so yes, it’s all very new to me).
Anyway, can someone please help me? On my old Orange rom, when sending a text (which is what I do a lot of) my “send to many logo” is missing from the CM7 rom (see pics). How can I get this back? It's driving me nut!
Try Another SMS App Like GOSMS or Handcent SMS
Rebooting and Battery usage
My zte with CM7 seems to use alot more battery than the original ROM i had. anyone else?
It will also reboot when the battery is lower than 30%. anybody know why?
The current CM7 rom is faulty, don't flash it....i'm also waiting for a more stable one. This rom is not so reactive to accelerometer so if you play games such as doodlejump, it won't work so don't flash the rom, instead you can flash this froyo, it's quite fast as well ! FLB froyo R11
Gen2
Hi All
Just flashed my Blade to Gen 2 yesterday and installed CM7 Gen2 .
On previous CM7 Final Gen 1, I had reboots and freezing on boot screen but
have had no issues since the new installation. Plays games very well.
Stransky
(Douglas)
Edit: Just upgraded CM7 to 7.0.2 and on reboot phone was stuck on boot screen and had no arrow
to swipe nor would menu button work other than to put phone in standby. Had to uses stock recovery to get cm7 to load and now
cannot get beyond the the Droid screen when trying to restore/backup. Will not enter clockwork recovery no matter what I try.
Can load CM7 basic but no google apps and unable to load gapps because I cannot enter clockwork recovery. Can any suggest a way out.
Use rom manager to install the latest clockwork mod
Sent from my Blade using XDA Premium App
So what's best for now: staying Gen 1 with CM7 v7.0.0 or turning into Gen2 and get v7.0.2 ?
HCDR.Jacob said:
Use rom manager to install the latest clockwork mod
Sent from my Blade using XDA Premium App
Click to expand...
Click to collapse
HI
Thanks for the reply but I have tried to download the latest ClockworkMod via Rom Manager and the same thing happens it tries to update and then freezes
on the droid screen. I can't get to the market as I cannot load gapps because
of the lack of ClockworkMod recovery. Catch 22 time. Any other suggestions greatly received.
Stransky
(Douglas)
HCDR.Jacob said:
Use rom manager to install the latest clockwork mod
Sent from my Blade using XDA Premium App
Click to expand...
Click to collapse
Hi HCDR.Jacob
Me again. Have just found out why I cannot load ClockworkMod Recovery or any other recovery. Ran Androot 1.6 andgot reply, when I tried to unroot - Not Rooted.
So I ran Androot and got the following "Rooted - No - Fu - Goo". Yet Balde is running CM7 . Question is now how do I root the blooming thing or is that a no go?
Please advise.
Stransky
(Douglas)
Edit: Have found possible fault is corrupt firmware. I s there any way to flash the firmware on the Blade to original state and if so how?
Google for no fu goo m8, it's a very common response and can sometimes be solved.
Troute said:
Google for no fu goo m8, it's a very common response and can sometimes be solved.
Click to expand...
Click to collapse
Hi
Thanks for that but info garnered no where near to solving prob. Managed to find z4Root and ran that and it informs me I am still rooted. Problem is that I cannot access ClockworkMod Recovery and rom manager is stuck on 3.0.2.0 and will not upgrade to 4.2.0.0 which is the latest as far as I can ascertain. Do you know of any way to get ClockworkMod back onto my Blade so that I cam upgrade CM to 7.0.2 and get google apps back.
Stransky
(Douglas)
I just upgraded my ZTE Blade to 7.0.2 using the latest Rom Manager (from 7 RC3) ... now my Blade just keeps booting only showing the Droid Logo for about 4 secs and that loops forever. I wasn't aware of any Gen1 vs. Gen2 thing. And am still not sure what this exactly is.
Is there anyway to fix this, or is the device bricked?
Any ideas? Any help is VERY MUCH appreciated!
Thx.
max42 said:
I just upgraded my ZTE Blade to 7.0.2 using the latest Rom Manager (from 7 RC3) ... now my Blade just keeps booting only showing the Droid Logo for about 4 secs and that loops forever. I wasn't aware of any Gen1 vs. Gen2 thing. And am still not sure what this exactly is.
Is there anyway to fix this, or is the device bricked?
Any ideas? Any help is VERY MUCH appreciated!
Thx.
Click to expand...
Click to collapse
Just gave you a possible tweak on your thread but please don't just splash your problem onto the other threads, as this is most likely to create confusion. If somebody can help you, he will answer you in the right thread: the one you opened.
Also a first look at similar topic or a quick search would have avoided this kind of situation. Even the first guide for flashing a custom ROM on the OSF clearly states a warning on the Gen1/Gen2 thing...
http://www.orangesanfrancisco.co.uk...cratch-on-the-orange-san-francisco-zte-blade/
gloc33 said:
Just gave you a possible tweak on your thread but please don't just splash your problem onto the other threads, as this is most likely to create confusion. If somebody can help you, he will answer you in the right thread: the one you opened.
Click to expand...
Click to collapse
I wouldn't have cross-posted if the topic wasn't CM7. Maybe it stops someone to make the same mistake -> see below.
gloc33 said:
Also a first look at similar topic or a quick search would have avoided this kind of situation. Even the first guide for flashing a custom ROM on the OSF clearly states a warning on the Gen1/Gen2 thing...
Click to expand...
Click to collapse
Didn't know about the site and wasn't aware of the Gen1/Gen2 issue.
I wanted to show a friend (iPhone owner) how easy it is to update the firmware using ROM Manager over a beer and simple downloaded CM7.0.2 using ROM Manager, not being aware of any Gen1/Gen2 issues...
well EPIC FAIL!
So, thx for the url and won't be crossposting again.
Regards,
-Max
Can't imagine your friend's face facing your endlessly rebooting phone. Indeed pretty epic
I tried cm7 had gps reboots and then when clicked settings got black screen
I've installed this ROM (CM7.02Nightly57 + CWM 3.0.2.7) yesterday, but having some troubles:
- the battery is duying very fast
- the pulldown menu can not be pulled up easy in normal mode. When in landcape it works nice, but when in portrait, it is stuck in the bottom, and you can pull it up after several times, or have to press back button
anyone has issues like this?
Nesovic said:
I've installed this ROM (CM7.02Nightly57 + CWM 3.0.2.7) yesterday, but having some troubles:
- the battery is duying very fast
- the pulldown menu can not be pulled up easy in normal mode. When in landcape it works nice, but when in portrait, it is stuck in the bottom, and you can pull it up after several times, or have to press back button
anyone has issues like this?
Click to expand...
Click to collapse
Autonomy issues have already been widely reported for 7.0.2, most people I have read from went back on CM7.0 stable because of that.
For the menu, this might be a new issue. Perhaps check on CM7 forum to see if it has been reported yet and whether a fix has been found yet.
Good news for Idea Blade users. The CM7 Rom by Burgerz found here works on our phones perfectly. Camera and touchscreen issues are fixed and the Rom is FAST. I'm using it now, you might want to give it a try
Cheers!
Thanks for handing out the information mate because i was getting lots of PM`s about that reason and i could not give a clear answer.
No problem
hi,
Tried the Rom on my Idea blade and camera gives error. the same error as other versions of CM7. "cannot connect camera"
Format all your partitions from cwm and try flashing again
hi couldn't download the rom from official page, could you please upload to mediafire thanks.
Dear jerrinfrncs,
Try this link: h**p://burgerz.pro/zte-blade/roms/
Rapier07 said:
Good news for Idea Blade users. The CM7 Rom by Burgerz found here works on our phones perfectly. Camera and touchscreen issues are fixed and the Rom is FAST. I'm using it now, you might want to give it a try
Cheers!
Click to expand...
Click to collapse
What about the battery performance? How long it last in standby mode?
praatikr said:
What about the battery performance? How long it last in standby mode?
Click to expand...
Click to collapse
I get one day with data always on, some games, browsing and music
Rapier07 said:
Format all your partitions from cwm and try flashing again
Click to expand...
Click to collapse
I Have an Idea Blade. Had problem with both camera and touchscreen in CM7.1.0. Yesterday i tried the CM7 Rom by Burgerz. Touchscreen is working properly but still can't use the camera. The same "cannot connect camera" error appears.What are all the partitions should i format? I've formatted data, cache and dalvik partitions. Still the problem persists.
zajith said:
I Have an Idea Blade. Had problem with both camera and touchscreen in CM7.1.0. Yesterday i tried the CM7 Rom by Burgerz. Touchscreen is working properly but still can't use the camera. The same "cannot connect camera" error appears.What are all the partitions should i format? I've formatted data, cache and dalvik partitions. Still the problem persists.
Click to expand...
Click to collapse
Some newer Blades have different hardware which needs different drivers to work. As ZTE doesn't release the source code for these properly, the current roms won't work properly on all of the newer versions. If may be possible that someone can fix it, but without ZTE releasing the sources it will be difficult for them.
jerrinfrncs said:
hi couldn't download the rom from official page, could you please upload to mediafire thanks.
Click to expand...
Click to collapse
i tried to download from that page but it never completes, gets cut off and can't resume. if somebody could upload to mediafire it would be very helpful thanks
I'm running this one from Burstlam and really like it. I prefer it because Burgerz's using and older (and plain) launcher. Camera works fine also.
burstlam
Posted 17 February 2012 - 08:33 PM:
latest build , OC, wifi-UV, 2 way Recording enabled Kernel. (ie.: no CPU UV)
Full Lanaguage, Latest repo sync + Fixed ICS rotation Animation.+ ... many other
to-be-merged Gerrit Patches
Normal Version:
http://hotfile.com/dl/146855038/9e67238/N353X-35-Full-Lang-signed.zip.html
md5 : 7b1b30ec08274fac0d961817543e3794
From: http://android.modaco.com/topic/335...-237/page__st__12620__p__1902127#entry1902127
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
You might want yo PM the dev about it. I had similar issues on CM stable but not anymore. Also you can give a try to LewaOS and other Chinese roms. They are based on cm7 fot the V880 which is what idea blade is.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
I also had the same problem with CM7.1. Formatting the cache and data partitions might make the touchscreen work (worked for me). Even though you format the partitions, touchscreen will stop working after the phone get into sleep mode and you have to format the data and cache partitions every time the touchscreen stops responding.
I have heard that Libraginger works fine on ZTE-U V880. But the download link seems to be broken. I am working on CM7 Rom by Burgerz even though camera is not functioning as i feel it is much stable and lesser buggier than official ZTE rom.
Amphoras said:
Some newer Blades have different hardware which needs different drivers to work. As ZTE doesn't release the source code for these properly, the current roms won't work properly on all of the newer versions. If may be possible that someone can fix it, but without ZTE releasing the sources it will be difficult for them.
Click to expand...
Click to collapse
Is there any way to backup driver for the camera from the stock rom and use it the current custom rom? I know the kernels are different. Still is there any chance?...
Sent from my Blade using XDA App
zajith said:
Is there any way to backup driver for the camera from the stock rom and use it the current custom rom? I know the kernels are different. Still is there any chance?...
Sent from my Blade using XDA App
Click to expand...
Click to collapse
Not that I know of, sorry.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
Even i had the same touchscreen problem when i installed MMHMP on my idea blade. All i had to do is restore the stock rom which was working fine and then i again installed MMHMP and its working fine.
Any method for custom partition in idea blade?
I want more space
Hi,
Internet turns off after being idle for some time on ICS 4.04 this problem was there on my phone as soon asi switched from Stock to Cutom 4.03.. even after getting 4.04 this problem persists.
Plz tell me a way around this problem as i have to stay connected all the time..
I ahve to hence toggle the "data enable - On /off" for it to get connected .. and some times whn that doesnt work.. i hv to reboot the phone..
Help .. Help!!!
Guys please help me.. 90 smthing views and no replies.. help me out!!!
Have you changed the baseband to the Asian baseband? that can help.
Never had this problem even when I never changed my baseband. Please post result after changing the baseband.
brajesh.sharma87 said:
Have you changed the baseband to the Asian baseband? that can help.
Never had this problem even when I never changed my baseband. Please post result after changing the baseband.
Click to expand...
Click to collapse
Brajesh.. i had to change the abseband initially for a signal to appear in the first place.. i was on the india..china SEA baseband.. on your request i have tried the other basband as well Hongkong / Taiwan though its the same frequency .
I think i may have put some settlings which might be doing this...
Regualily an "E" sign appear on top when i am online ( E-Edge probably) but i use 2G only.. i read sm whr to save battery .. mobile cuts of internet on phone . Is this why it is happenenig with me??? Please tell me a way around ...
same problem here.
I'm from Poland, Play Mobile. I tried to change bandwidth few times, now I think, internet stops to switching off. Dunno what is causing this problem. On cm7 never happend. However after flashing CM9 from epsylon, network indicator is showing 3g (instead of H in stock or cm7) but in the system information is HSPA.
sorry for my bad english
give today's Epsylon build a try... the first one that data stays connected for me.
ktmbikerman said:
give today's Epsylon build a try... the first one that data stays connected for me.
Click to expand...
Click to collapse
thanks i will try this... but the problem is that i have a defy not a defy plus.. the build you are refering to is for defy + i think....today.. when i tried the 120406 nightly after patching the zip of nightly and gapps.. when i tried to run the kernel(CM7 one).. the phone shutdown.. didnt pose a problem in restarting.. but it did smthing it wasnt suppose to do... hence i am little apprehensive.. so plz clarify which files to use..which kernel. and nightly file..
If you have red lense, then you can use defy+ build by installing cm9 kernel.
If you want to return to a defy build later, just install cm7 kernel again
You can find download links on first page of this post: http://forum.xda-developers.com/showthread.php?t=1432100
javonera said:
If you have red lense, then you can use defy+ build by installing cm9 kernel.
If you want to return to a defy build later, just install cm7 kernel again
You can find download links on first page of this post: http://forum.xda-developers.com/showthread.php?t=1432100
Click to expand...
Click to collapse
Defy, Green - Then i am comfortable with the present build i am on.. But this really doesnt solve my problem.. can this be solved without flashing it again.. Very few seems to face this perticular problem..Help me out!!!
Its very annoying...
coolatin said:
Defy, Green - Then i am comfortable with the present build i am on.. But this really doesnt solve my problem.. can this be solved without flashing it again.. Very few seems to face this perticular problem..Help me out!!!
Its very annoying...
Click to expand...
Click to collapse
You will get CM9 for Defy builds by Epsilon here
Do you flashed the rom only one time? Or have you flashed the rom twice?
For me i had the same problems on cm7 but after flashing latest epsylon all work great. Perhaps try a full wipe and flash once more. (make a backup before and you have nothing to loose or?)
I have defy green lense and after choose the right baseband i have no problems, beofre with asian baseband in germany it doesnt work very well. So be sure you have choose the right baseband and/or full wipe and flash
for me new nighties updated via builtin updater solved problem. Now defy works perfect on ics.
edit:
nope.. it's switching off again... damn...
pranks1989 said:
You will get CM9 for Defy builds by Epsilon here
Click to expand...
Click to collapse
I dont hv a problem with the builds.. I can get that myself.. infact i have the latest one already installed.. what i want is smone to fix my problem of data connectivity.. the data goes off after being idle for smtime.. Help me with this...Please.. anyone..
Any heads up on my problem??
coolatin said:
I dont hv a problem with the builds.. I can get that myself.. infact i have the latest one already installed.. what i want is smone to fix my problem of data connectivity.. the data goes off after being idle for smtime.. Help me with this...Please.. anyone..
Click to expand...
Click to collapse
Have you tried taking your sim card out and giving it a good clean? I actually found that mine was bent from getting hot. After a clean and straighten it works very well with the latest ics builds. I was getting continual disconnects previously.
Sent from my MB526 using xda premium
I had the same issue on my D+ when I was on Quarx latest cm9 nightly. Initially the network doesnt show up at all. So i had to use baseband switcher to select India after flashing every Cm build. Then switched to latest cm7.2 by Quarx, but strangely it happened on 7.2 too. Then I just casually switched baseband to China ME722 1.10 and now the issue seems to be resolved. I'm yet to try the same on Cm9, will be trying it out in a day or two.
coolatin said:
Any heads up on my problem??
Click to expand...
Click to collapse
I can´t help you but i have a same problem like you. And i´m from the Czech Republic. Maybe i can change the bb.
Changing the baseband to other locations did not help the cause.. the same problem still persists..
Also my SIM seems fit and fine( )... and i cleaned it.. ( just for the sake of it)..but the problem is still thr
does no one have a proper solution for this...
I'm using Epsylon's 6th April build and it works perfectly fine. Even what I feel like; it is the best ROM to date which does not disconnects automatically as I face this problem with other ROMs.
Rajneeshgadge17 said:
I'm using Epsylon's 6th April build and it works perfectly fine. Even what I feel like; it is the best ROM to date which does not disconnects automatically as I face this problem with other ROMs.
Click to expand...
Click to collapse
i used that ROM as well it was there in dat ROM as well.. i am stil facing when i am on 4.04 16 Apr build.... still its there..
Could you discuss the setting for internet etc... so i can check if thrs anything i can do on that front.. its selected on "only 2G" with baseband set to SEA (Asia) ...lemme knw about that front.
this problem is the single most irritating problem i am facing ever since i put a custom ROM..
PLZ... some one for FiX for this!!!
Hi
I need help big time. I had CM 10 running on my defy no probs at all. I tried a stupid thing to back to a stock rom and now I cant get back to install CM 7 or CM10.
I even had my battery die during the process and had to do the Mcgyver trick and it worked. I live in the UK and tried the british retail and vodafone roms and both caused the defy to die and not respond / power up, anything..
The only rom I have found so far to work is JORDN_U3_97.21.51.sbf. it works,. Then I can install 2nd init and root with Super one click. Though after I do that and try to install CM7, 10 I just get black screen and white LED.
Help.
Can someone walk me through the process again and provide links to files
Many thanks in advance
chris
Make sure that when you flash cm7, you flash the one for you kernel(froyo or gb). Also wipe data after flashing.
Sent from my MB526 using xda premium
You can try THIS. Another user had the same problem as you and he got his defy running after following that guide.
stefa_vr6 you are a GENIUS
stefa_vr6 said:
You can try THIS. Another user had the same problem as you and he got his defy running after following that guide.
Click to expand...
Click to collapse
:good:
stefa_vr6 you sir are a genius. This was exactly what I wanted. I flashed the rom in your post, rooted and installed 2nd init and fom there flashed CM10. So now up and running again.
Have a case of virtual beer on me sir.
My only other problem is now that I probably need a new battery as I had to do the battery hack as my phone died during an earlier update and is displaying " ?" in the battery display.
Thanks again
chris
Hi All,
I am one of the victims who mistakenly flashed defy+ sbf on a normal defy with green lens. It was bricked for quite some time and then later magically one day DEFYPLUS_U3_4.5.1 134_DFP-231 SBF worked. Now the phone (orginally MB525) only accepts custom ROMS made for MB526 with camera not working. the message i get is "Can't connect to camera". Recently i tried Quarx build made for MB526 (4.1.2) and suprisingly my camera was working fine. The only problem i was having is my phone would not give me a ringtone music when a call comes and the moment i make a call the screen goes off. It will only come back ON when the other party disconnects. Sometimes that will also not happen and i will have to totally restart my phone (i am guessing the sensors are also not working). For some time I tried using option in Accessability saying power button ends call. Volume rocker turn of doesnt work.
Finally, now i am using a WakJIUI Rom based on GB. Everything works perfectly except for camera and sensor. I have a workaround of sensor where i can choose not to have the screen turned off while on call and volume rocker key works like a charm.
Now, the reason why i started this thread is a vauge idea came to me where i am thinking of having a WakJIUI Rom as stable and use Quarks 4.1.2 build as second boot. I have no idea how to use dual boot. i have read forums but they are confusing.
Anybody who can help...
You cannot dual boot Quarx's CM10.
You can flash Quarx's CM10 and Jelly X kernel to fix ringtone bug, and to fix proximity issue there is an option for "Inaccurate proximity sensor" in Settings > Display under CM10
You can try to fix proximity sensor issue, watch the following video: http://youtu.be/uMk1S90MjbY
Sent from my MB526 using xda premium
hackergnome said:
You cannot dual boot Quarx's CM10.
You can flash Quarx's CM10 and Jelly X kernel to fix ringtone bug, and to fix proximity issue there is an option for "Inaccurate proximity sensor" in Settings > Display under CM10
You can try to fix proximity sensor issue, watch the following video: http://youtu.be/uMk1S90MjbY
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thanks for the insight. One question again : In past when i tried flashing kernal of CM7 and CM9 my phone gets into soft brick mode. where i again have to flash the sbf i mentioned above. i am guessing thats because these kernals are made for MB525. Now that my phone identifies itself as MB526 will this jelly X kernal work....
JadhavN said:
Thanks for the insight. One question again : In past when i tried flashing kernal of CM7 and CM9 my phone gets into soft brick mode. where i again have to flash the sbf i mentioned above. i am guessing thats because these kernals are made for MB525. Now that my phone identifies itself as MB526 will this jelly X kernal work....
Click to expand...
Click to collapse
no, no need to flash any sbf, because it's 2nd-boot
Flash rom, flash gapps, flash jellyx
if you get black screen after bootmenu pull the battery and restart
Sent from my MB526 using xda premium
hackergnome said:
no, no need to flash any sbf, because it's 2nd-boot
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thanks for the advise man. I did complete data wipe and cache partition. Flashed the Jelly X Kernal, then installed the sister JB. My camera is working fine. Ringtone issue fixed and also thanks to that video maker, my proximity sensor issue is also resolved.
JadhavN said:
Thanks for the advise man. I did complete data wipe and cache partition. Flashed the Jelly X Kernal, then installed the sister JB. My camera is working fine. Ringtone issue fixed and also thanks to that video maker, my proximity sensor issue is also resolved.
Click to expand...
Click to collapse
:thumbup:
Sent from my MB526 using xda premium