Good news for Idea Blade users. The CM7 Rom by Burgerz found here works on our phones perfectly. Camera and touchscreen issues are fixed and the Rom is FAST. I'm using it now, you might want to give it a try
Cheers!
Thanks for handing out the information mate because i was getting lots of PM`s about that reason and i could not give a clear answer.
No problem
hi,
Tried the Rom on my Idea blade and camera gives error. the same error as other versions of CM7. "cannot connect camera"
Format all your partitions from cwm and try flashing again
hi couldn't download the rom from official page, could you please upload to mediafire thanks.
Dear jerrinfrncs,
Try this link: h**p://burgerz.pro/zte-blade/roms/
Rapier07 said:
Good news for Idea Blade users. The CM7 Rom by Burgerz found here works on our phones perfectly. Camera and touchscreen issues are fixed and the Rom is FAST. I'm using it now, you might want to give it a try
Cheers!
Click to expand...
Click to collapse
What about the battery performance? How long it last in standby mode?
praatikr said:
What about the battery performance? How long it last in standby mode?
Click to expand...
Click to collapse
I get one day with data always on, some games, browsing and music
Rapier07 said:
Format all your partitions from cwm and try flashing again
Click to expand...
Click to collapse
I Have an Idea Blade. Had problem with both camera and touchscreen in CM7.1.0. Yesterday i tried the CM7 Rom by Burgerz. Touchscreen is working properly but still can't use the camera. The same "cannot connect camera" error appears.What are all the partitions should i format? I've formatted data, cache and dalvik partitions. Still the problem persists.
zajith said:
I Have an Idea Blade. Had problem with both camera and touchscreen in CM7.1.0. Yesterday i tried the CM7 Rom by Burgerz. Touchscreen is working properly but still can't use the camera. The same "cannot connect camera" error appears.What are all the partitions should i format? I've formatted data, cache and dalvik partitions. Still the problem persists.
Click to expand...
Click to collapse
Some newer Blades have different hardware which needs different drivers to work. As ZTE doesn't release the source code for these properly, the current roms won't work properly on all of the newer versions. If may be possible that someone can fix it, but without ZTE releasing the sources it will be difficult for them.
jerrinfrncs said:
hi couldn't download the rom from official page, could you please upload to mediafire thanks.
Click to expand...
Click to collapse
i tried to download from that page but it never completes, gets cut off and can't resume. if somebody could upload to mediafire it would be very helpful thanks
I'm running this one from Burstlam and really like it. I prefer it because Burgerz's using and older (and plain) launcher. Camera works fine also.
burstlam
Posted 17 February 2012 - 08:33 PM:
latest build , OC, wifi-UV, 2 way Recording enabled Kernel. (ie.: no CPU UV)
Full Lanaguage, Latest repo sync + Fixed ICS rotation Animation.+ ... many other
to-be-merged Gerrit Patches
Normal Version:
http://hotfile.com/dl/146855038/9e67238/N353X-35-Full-Lang-signed.zip.html
md5 : 7b1b30ec08274fac0d961817543e3794
From: http://android.modaco.com/topic/335...-237/page__st__12620__p__1902127#entry1902127
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
You might want yo PM the dev about it. I had similar issues on CM stable but not anymore. Also you can give a try to LewaOS and other Chinese roms. They are based on cm7 fot the V880 which is what idea blade is.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
I also had the same problem with CM7.1. Formatting the cache and data partitions might make the touchscreen work (worked for me). Even though you format the partitions, touchscreen will stop working after the phone get into sleep mode and you have to format the data and cache partitions every time the touchscreen stops responding.
I have heard that Libraginger works fine on ZTE-U V880. But the download link seems to be broken. I am working on CM7 Rom by Burgerz even though camera is not functioning as i feel it is much stable and lesser buggier than official ZTE rom.
Amphoras said:
Some newer Blades have different hardware which needs different drivers to work. As ZTE doesn't release the source code for these properly, the current roms won't work properly on all of the newer versions. If may be possible that someone can fix it, but without ZTE releasing the sources it will be difficult for them.
Click to expand...
Click to collapse
Is there any way to backup driver for the camera from the stock rom and use it the current custom rom? I know the kernels are different. Still is there any chance?...
Sent from my Blade using XDA App
zajith said:
Is there any way to backup driver for the camera from the stock rom and use it the current custom rom? I know the kernels are different. Still is there any chance?...
Sent from my Blade using XDA App
Click to expand...
Click to collapse
Not that I know of, sorry.
jerrinfrncs said:
ok installed it on my idea blade and everything was working perfectly until i switched off. on turning the phone on the touchscreen stopped responding, got similar problem with swedish snow and MMHMP.
Click to expand...
Click to collapse
Even i had the same touchscreen problem when i installed MMHMP on my idea blade. All i had to do is restore the stock rom which was working fine and then i again installed MMHMP and its working fine.
Any method for custom partition in idea blade?
I want more space
Related
Just installed "CyanogenMod-7 for ZTE Blade (Orange San Francisco) :: V7.0.0-RC4 (30/03/2011)"
Firstly, many thanks for making this great rom. Instructions very easy to follow, even I could do it (my first smart phone, only had it 5 days so yes, it’s all very new to me).
Anyway, can someone please help me? On my old Orange rom, when sending a text (which is what I do a lot of) my “send to many logo” is missing from the CM7 rom (see pics). How can I get this back? It's driving me nut!
Try Another SMS App Like GOSMS or Handcent SMS
Rebooting and Battery usage
My zte with CM7 seems to use alot more battery than the original ROM i had. anyone else?
It will also reboot when the battery is lower than 30%. anybody know why?
The current CM7 rom is faulty, don't flash it....i'm also waiting for a more stable one. This rom is not so reactive to accelerometer so if you play games such as doodlejump, it won't work so don't flash the rom, instead you can flash this froyo, it's quite fast as well ! FLB froyo R11
Gen2
Hi All
Just flashed my Blade to Gen 2 yesterday and installed CM7 Gen2 .
On previous CM7 Final Gen 1, I had reboots and freezing on boot screen but
have had no issues since the new installation. Plays games very well.
Stransky
(Douglas)
Edit: Just upgraded CM7 to 7.0.2 and on reboot phone was stuck on boot screen and had no arrow
to swipe nor would menu button work other than to put phone in standby. Had to uses stock recovery to get cm7 to load and now
cannot get beyond the the Droid screen when trying to restore/backup. Will not enter clockwork recovery no matter what I try.
Can load CM7 basic but no google apps and unable to load gapps because I cannot enter clockwork recovery. Can any suggest a way out.
Use rom manager to install the latest clockwork mod
Sent from my Blade using XDA Premium App
So what's best for now: staying Gen 1 with CM7 v7.0.0 or turning into Gen2 and get v7.0.2 ?
HCDR.Jacob said:
Use rom manager to install the latest clockwork mod
Sent from my Blade using XDA Premium App
Click to expand...
Click to collapse
HI
Thanks for the reply but I have tried to download the latest ClockworkMod via Rom Manager and the same thing happens it tries to update and then freezes
on the droid screen. I can't get to the market as I cannot load gapps because
of the lack of ClockworkMod recovery. Catch 22 time. Any other suggestions greatly received.
Stransky
(Douglas)
HCDR.Jacob said:
Use rom manager to install the latest clockwork mod
Sent from my Blade using XDA Premium App
Click to expand...
Click to collapse
Hi HCDR.Jacob
Me again. Have just found out why I cannot load ClockworkMod Recovery or any other recovery. Ran Androot 1.6 andgot reply, when I tried to unroot - Not Rooted.
So I ran Androot and got the following "Rooted - No - Fu - Goo". Yet Balde is running CM7 . Question is now how do I root the blooming thing or is that a no go?
Please advise.
Stransky
(Douglas)
Edit: Have found possible fault is corrupt firmware. I s there any way to flash the firmware on the Blade to original state and if so how?
Google for no fu goo m8, it's a very common response and can sometimes be solved.
Troute said:
Google for no fu goo m8, it's a very common response and can sometimes be solved.
Click to expand...
Click to collapse
Hi
Thanks for that but info garnered no where near to solving prob. Managed to find z4Root and ran that and it informs me I am still rooted. Problem is that I cannot access ClockworkMod Recovery and rom manager is stuck on 3.0.2.0 and will not upgrade to 4.2.0.0 which is the latest as far as I can ascertain. Do you know of any way to get ClockworkMod back onto my Blade so that I cam upgrade CM to 7.0.2 and get google apps back.
Stransky
(Douglas)
I just upgraded my ZTE Blade to 7.0.2 using the latest Rom Manager (from 7 RC3) ... now my Blade just keeps booting only showing the Droid Logo for about 4 secs and that loops forever. I wasn't aware of any Gen1 vs. Gen2 thing. And am still not sure what this exactly is.
Is there anyway to fix this, or is the device bricked?
Any ideas? Any help is VERY MUCH appreciated!
Thx.
max42 said:
I just upgraded my ZTE Blade to 7.0.2 using the latest Rom Manager (from 7 RC3) ... now my Blade just keeps booting only showing the Droid Logo for about 4 secs and that loops forever. I wasn't aware of any Gen1 vs. Gen2 thing. And am still not sure what this exactly is.
Is there anyway to fix this, or is the device bricked?
Any ideas? Any help is VERY MUCH appreciated!
Thx.
Click to expand...
Click to collapse
Just gave you a possible tweak on your thread but please don't just splash your problem onto the other threads, as this is most likely to create confusion. If somebody can help you, he will answer you in the right thread: the one you opened.
Also a first look at similar topic or a quick search would have avoided this kind of situation. Even the first guide for flashing a custom ROM on the OSF clearly states a warning on the Gen1/Gen2 thing...
http://www.orangesanfrancisco.co.uk...cratch-on-the-orange-san-francisco-zte-blade/
gloc33 said:
Just gave you a possible tweak on your thread but please don't just splash your problem onto the other threads, as this is most likely to create confusion. If somebody can help you, he will answer you in the right thread: the one you opened.
Click to expand...
Click to collapse
I wouldn't have cross-posted if the topic wasn't CM7. Maybe it stops someone to make the same mistake -> see below.
gloc33 said:
Also a first look at similar topic or a quick search would have avoided this kind of situation. Even the first guide for flashing a custom ROM on the OSF clearly states a warning on the Gen1/Gen2 thing...
Click to expand...
Click to collapse
Didn't know about the site and wasn't aware of the Gen1/Gen2 issue.
I wanted to show a friend (iPhone owner) how easy it is to update the firmware using ROM Manager over a beer and simple downloaded CM7.0.2 using ROM Manager, not being aware of any Gen1/Gen2 issues...
well EPIC FAIL!
So, thx for the url and won't be crossposting again.
Regards,
-Max
Can't imagine your friend's face facing your endlessly rebooting phone. Indeed pretty epic
I tried cm7 had gps reboots and then when clicked settings got black screen
I've installed this ROM (CM7.02Nightly57 + CWM 3.0.2.7) yesterday, but having some troubles:
- the battery is duying very fast
- the pulldown menu can not be pulled up easy in normal mode. When in landcape it works nice, but when in portrait, it is stuck in the bottom, and you can pull it up after several times, or have to press back button
anyone has issues like this?
Nesovic said:
I've installed this ROM (CM7.02Nightly57 + CWM 3.0.2.7) yesterday, but having some troubles:
- the battery is duying very fast
- the pulldown menu can not be pulled up easy in normal mode. When in landcape it works nice, but when in portrait, it is stuck in the bottom, and you can pull it up after several times, or have to press back button
anyone has issues like this?
Click to expand...
Click to collapse
Autonomy issues have already been widely reported for 7.0.2, most people I have read from went back on CM7.0 stable because of that.
For the menu, this might be a new issue. Perhaps check on CM7 forum to see if it has been reported yet and whether a fix has been found yet.
hi,i just bought zte blade, rooted, installed cwm, upgraded to gen 2 using tpt method, and installed CM7, stable 7.0.3, also tried RC1, latest nightly and a few random nighlies
and my problem occurs in all of them.... auto rotate isnt working... IT IS TURNED ON in sttings,tried to turn on of tried to reboot tried to wipe everything tried factory reset nothing helps... and i see im not the first one with this problem but all of the topics started about this issue have 0 replies.. this bug is not stated anywhere in changelogs and in fact it makes CM7 unusable on ZTE Blade.. cause you cant always message and browse and do everything in portrait view... i heard its a kernel issue that every overclock enabled kernel on device upraded from g1 to g2 makes accelerometer or g sensor or w/e you call it stop working.. i really love cm7 and i bought this phone thinking im gonna use it on it and this issue is really frustrating please help someone.. please
Try another ROM like Swedish Spring or Ginger Stir Fry and if it still occurs in those ROM's then it's probably a hardware fault.
same hi
hi there, ive bought my blade 2 days ago, and got the same issue you are talking about, i flashed it to swedish and find out that auto-rotate doesnt work, so ive tried different kernel that should have helped, but istead blade didnt even boot, ive also tried newest CM7 with no luck...kinda desperate and confused that there are just few threads about this and no real solution, thinking of going back to stock froyo, but iam afraid of bricking...if u find any solution write here or on email, ill do the same if i find one, thx
New Blades seem to have different sensor hardware. Try Sensor List from market and compare the results with this screen (from Orange San Francisco bought earlier this year):
db.tt/ms5m4i6
(can't post links)
yes your right, thats the source of the problem, my accelerometer is not the same as yours.. heres the screen tinyurl dot com slash 3tqv26o
now me and other peaople wold like to know if there is a way to modify kernel to work with this hardware... i think cm7 developers should be intersted in resolving this
Gamaqadra said:
yes your right, thats the source of the problem, my accelerometer is not the same as yours.. heres the screen tinyurl dot com slash 3tqv26o
now me and other peaople wold like to know if there is a way to modify kernel to work with this hardware... i think cm7 developers should be intersted in resolving this
Click to expand...
Click to collapse
They're already looking into it.
k0zmic said:
They're already looking into it.
Click to expand...
Click to collapse
didnt know that, people posting about this on CM7 forums dont get much attention
if they really manage to get it to work that will be my uber happy day like when i had wildfire stock 2.2 and alpharevx came out
I also have the same problem, will hit modaco forums n check if there`s something on it.
Can we calibrate those sensor?
Sent from my ZTE-BLADE using XDA App
Got my blade yesterday...auto rotate was working well till i upgraded to gen2 and installed cm7. I have being doing a lot of research on that...so if anyone comes up with a workaround, please inform
P.S i am not uninstalling cm7, thats the best rom i have ever seen
briankariu said:
Got my blade yesterday...auto rotate was working well till i upgraded to gen2 and installed cm7. I have being doing a lot of research on that...so if anyone comes up with a workaround, please inform
P.S i am not uninstalling cm7, thats the best rom i have ever seen
Click to expand...
Click to collapse
Now Brian n the rest, there is no work around on it, tried changing different kernels without success, finally flashed cm7 n installed Ginger Stir Fry, its been 3 days n everything is fine, but remember u`ve already upgraded to Gen 2, so no need of Tpt install, just get the Rom, its also very good at preserving power. with problems hit me up on twitter @alexakams
i also use Ginger Stir Fry because AutoRotation dont work with cm7. its a clean and fast rom, but Elitemovil Blade_Rom is also an option.
GPS not working.
I got my ZTE blade from Swiss orange and flashed it with CM7 Nightly 08312011
My GPS is not working, accelerator does and everything else but GPS just wont work...
What should i do? flash it with another rom? is there some kind of a fix that someone is familiar with? Did anyone have a similar problem and if anybody knows what might be the issue please, cuz I'm ultra noob, i already bricked one HTC so i don't like doing it...
Enable use wireless networks for location in location settings
Or try a stable cm7 build
Hit THANKS if helpful
Sent from my Blade using xda premium
crnadakm said:
GPS not working.
I got my ZTE blade from Swiss orange and flashed it with CM7 Nightly 08312011
My GPS is not working, accelerator does and everything else but GPS just wont work...
What should i do? flash it with another rom? is there some kind of a fix that someone is familiar with? Did anyone have a similar problem and if anybody knows what might be the issue please, cuz I'm ultra noob, i already bricked one HTC so i don't like doing it...
Click to expand...
Click to collapse
That is a really old CM7 nighly you installed, try a newer one.
Nightly 257
I will trz nightly 257... I'll let zou know if it sorts the problem...
crnadakm said:
I will trz nightly 257... I'll let zou know if it sorts the problem...
Click to expand...
Click to collapse
It's still old use newer ones like burstlam's latest with beats and bravia u can find it at cm Kang development
Thanks
Well I flashed it with nightly 257 and it seems to be working
iGo tells me where to go
Thank you all, and i will install those newer roms but for now i'll stick with this one cuz i need gps and i know that this one works.
So thread solved
crnadakm said:
Well I flashed it with nightly 257 and it seems to be working
iGo tells me where to go
Thank you all, and i will install those newer roms but for now i'll stick with this one cuz i need gps and i know that this one works.
So thread solved
Click to expand...
Click to collapse
I have tried all the cm after n257 and almost all roms out there and gps works on all as I too use gps regularly
Hi people
I have a sapo a5 aka ZTE Blade
It is an zte blade with a 5 megapixel camera.
But I have a very BIG problem, sometimes when I open images using the gallery, my phone crashes to the green android (reboot), in other words, isn't the gallery process crashing, is the phone itself.
With the original ROM (sapo 2.2 froyo) i don't have any problems but i don't like the original, it is too slow, etc.. I have the crash problem with all cm7 versions and other roms. I have friends with the same phone and they don't have any problem with the gallery. It's a strange problem because this only occurs with photos, I don't get any crash playing games, etc..
I don't get the crash with the cm7.0, but in this version the phone sensor doesn't work on the gallery if i don't install a properly driver.
So I think the problem is on the sensor drivers.
Thank You!
Dowmload Software
Download the software for ZTE official website that will fix ur problem,
ww.zteuk.co.uk,click Devices-->Product List(choose models here)-->Product support...
anish76 said:
Download the software for ZTE official website that will fix ur problem,
ww.zteuk.co.uk,click Devices-->Product List(choose models here)-->Product support...
Click to expand...
Click to collapse
I don't understand. Are you saying to install de ZTE Libra/Blade oficial ROM?
But if I want the CM7 rom, how I can fix this problem?
Di0g0 said:
I don't understand. Are you saying to install de ZTE Libra/Blade oficial ROM?
But if I want the CM7 rom, how I can fix this problem?
Click to expand...
Click to collapse
Yes. He's saying flash a stock ROM
QuantumFoam said:
Yes. He's saying flash a stock ROM
Click to expand...
Click to collapse
But I want CM7 My friends can use CM7 without this problem with the same phone...
I don't like stock roms....
First put stock then reput cm7
QuantumFoam said:
First put stock then reput cm7
Click to expand...
Click to collapse
And do you think that will solve my problem?
It is a bit strange resolution...
It may. There's no guarantee.
Recently I had a strange problem with Google Play too. Flashing stock solved my problem
Hey Guys,
I have worked on fixing certain issues with Shenqi V4.1,Like calendar and few other. I think its a very stable ROM, have been using it for over 3 weeks. I would like to post it for you. I am no developer/Hack expert, just a curious noob. I fixed very few issues and the ROM is pretty good. Thanks a lot for Shenqi to the original developer Yicong Huang and also mchlbenner for constantly trying to provide us with the best.
Features
1)Camera and Video (native)
2)Sensors and compass
3) FM
5) Everything that the phone supports.
Drawbacks
1)Lacks proper memory management (only when you open too many apps), could be over clocked to 1Ghz though for better performance.
2)No keyboard included. Please keep a keyboard app handy.
3)No link2sd
Instructions:
1) Create a folder called nandroid on SD-card and put it inside. If you already do just copy the downloaded files inside.
2) 3 Wipes before and after.
ShenqiV41_without GAPS
Download
ShenqiV41_with_Gaps(130mb free memory)
Download
Sent from my Milestone XT720
Thanks for this ROM, this looks really complete with everything native and working. Link2SD gave me some problems with apps disappearing so i uninstalled it. If you are on XT720-2.1mod.SBF you have to apply CM7 sensor fix for correct orientation.
Yes, I've experienced the same problem with link2sd, please try over clocking to 1Ghz. This ROM is really fast then.
Sent from my Milestone XT720
Basmatek said:
Thanks for this ROM, this looks really complete with everything native and working. Link2SD gave me some problems with apps disappearing so i uninstalled it. If you are on XT720-2.1mod.SBF you have to apply CM7 sensor fix for correct orientation.
Click to expand...
Click to collapse
You need to apply the cm7 sensor fix if you are using sbf mod.
Sent from my SGH-T759 using xda premium
Is the HDMI out working?
agostinialan said:
Is the HDMI out working?
Click to expand...
Click to collapse
Sorry, I haven't checked that.
dl link not working
Awesome. Moto XT720 is still alive. I was lost my XT702 June last year.
link is dead!!
Please update link
jufece said:
link is dead!!
Click to expand...
Click to collapse
vadims746 said:
Please update link
Click to expand...
Click to collapse
Fortunately I flashed this rom several weeks ago on my wife's stone. Imho it is good for a daily driver and also one of the faster roms which are available for this device. :good:
Here is a mirror: http://www.mediafire.com/download/gkldv6kay2jmsbj/ShenqiV41_With_GAPS_nandroid.zip
Note: This is the original version incl. gapps provided by OP. You need to restore it through nandroid.
Have fun!
How install it?
Through recovery/nandroid restore.
vadims746 said:
How install it?
Click to expand...
Click to collapse
unzip, put the folder in nandroid folder, boot in recovery mode, nandroid and restore click the shenqi,