Related
Ok, I have been browsing this forum for a solution to my problem and none seem too specific, at least for my BA wm6.
Here is the problem: I just received a dual sim adapter (the one that needs cutting) -both sims work fine. I can't get them to switch from one sim to the other from my phone. power on/off and flight mode won't do it either. I tried phone alarm, dual sim switcher, and wivit. They don't work for my phone. I also have a wm2003 se BA and tried it on there and I was only to get the dual sim to switch once. So now the dual sim is stuck on SIM2. So it doesn't matter which phone I use I can only use the sim that is on the SIM 2 slot! Blah!!
What I need: A program, or anything to switch my SIMs for my BA wm6. I don't want to keep taking out my sim and open the sim adapter and switch the two sims all the time.
Edit: after fooling around with my 2003se BA I managed to get the Dual Sim Manager to work again, and I noticed that despite switching SIMS, phone information alway display the default SIM. Does this mean that it is not switching? Does this mean that it does switch but the phone does not display it? If latter is the case then I am in big trouble! One SIM has unlimited internet and texting and other one is just a basic plan. Please help! I don't want a surprise bill!
Edit: Sorry, I needed an answer so I'm feverishly testing this crap out. And the answer is yes the sim changes but the phone does not display so. The trick I used is texting my account info and voila! Two different accounts! So, now over to my wm6 BA and check that out
I'm really surprised, that people are so patient to fight with such an uneffective and clumsy device as dual SIM adapter: you have to cut/destroy those SIM cards, then you have to pray that i works with your phone...
I really think, that if you really need to use 2 SIMcards, why not buying a 2nd phone, or just a special phone with 2 radios and for 2 SIMs.
And please don't tell me it's "for comfort" - dualSIM is antiComfort...
There are other solutions that you don't need to cut the sim, one that I have seen is the addapter is placed in the sim slot and the simm are part of the battery pack.
Bottom line is that that one sucks as well.
I feel there is a valid need in my line of work were I would need at least 3 laptops to support the Builds of my customers however VMWare gets me by fine.
As for the phone, I need 2, carry 2 and hate it.
So I would be a buyer if there was anything around worth having. (which as I still have a BA seems not the case).
Dual Sim Problem
Hi pharmeceutikle,
I wonder how this device works for BA at all!
I tried an adapter like yours of a friend of mine and it just doesn't work with my BA.After inserted, I don't see any new menu for it and when I restart the BA, it shows invalid sim message at startup. I have installed a WM6.1 ROM downloaded at this site [20749 (Build 20749.1.4.0 PV DVH) - v13] and my radio version is 1.12 (by the way, it was 1.15 but 1.12 is the only one that worked fine for my device). The same adapter, once installed on a Motorola phone of my friend works pretty fine! so, it's not a problem with the adapter, I guess...
Did you change anything on registry? could you please tell me how did you proceed since cutting the sims until you got it to work, please?
Many thanks!
JFLB said:
Hi pharmeceutikle,
I wonder how this device works for BA at all!
I tried an adapter like yours of a friend of mine and it just doesn't work with my BA.After inserted, I don't see any new menu for it and when I restart the BA, it shows invalid sim message at startup. I have installed a WM6.1 ROM downloaded at this site [20749 (Build 20749.1.4.0 PV DVH) - v13] and my radio version is 1.12 (by the way, it was 1.15 but 1.12 is the only one that worked fine for my device). The same adapter, once installed on a Motorola phone of my friend works pretty fine! so, it's not a problem with the adapter, I guess...
Did you change anything on registry? could you please tell me how did you proceed since cutting the sims until you got it to work, please?
Many thanks!
Click to expand...
Click to collapse
This dual sim adapter only works if you have a working STK ROMs. I believe I used Helmi's original wm6 as one of them and then I went to others but I can't quite remember which. I posted an experiment with the all the ROMS I used awhile ago so just do a search under my name. Anyways, I couldn't get it to switch sims normally so I had to reset the damn thing all the time. I would go to the STK menu and choose either sim 1 or 2 and then quit out and then reset my phone for it to make the change which really is a pain. As soon as my second sim ran out I just tossed the infernal thing and stuck one sim per phone! Sorry couldn't be much more of a help.
Thanks
Thanks anyway I'll keep searching for a while.
Sorry if this has been posted before, couldnt find any threads on the subject, I have a unlocked Touch HD but when i insert a o2 sim card it keeps showing as no service. when sim card is inserted it does recognise that its a o2 sim card and configures the setting
anyone out there had same issue?
Stock or cooked rom? Has it worked before or is this new behavior?
Cooked rom, o2 sim didnt work before i installed cooked rom
Do you know anyone else with a sim card that you can drop in there to see if theirs' get service? How old is your sim card? May take it by your provider and have them stick a card in to see if they can get it to fire up.
Also, go to your phone settings and see if your connection is set to a specific frequeuncy or if it's set to auto. If it's set to a specific frequency eg. GSM 1900/2100 or something like that, change it to auto and see what happens.
Did you purchase the phone unlocked or did you do it yourself? May be matter of flashing the correct radio.
Ive tried what you have suggested but still same issue, ive upgraded htc hd to the latest radio but same issue.
MIA said:
Ive tried what you have suggested but still same issue, ive upgraded htc hd to the latest radio but same issue.
Click to expand...
Click to collapse
MIA,
Have you tried the latest stock ROM (do a hard reset after reverting to a stock ROM)?
Have you tried different SIM cards from different networks?
How did you acquire this phone again?
Cheers.
I swapped my htc tytn 2 for this phone, ive tried orange, t-mobile, vodafone sim cards and they are all working fine, when i got the phone it had the latest official rom from htc and even then it was still showing as no service, ive upgraded rom to duttys 6.5 and upgraded to latest radio.
So you have tried other sims with this phone and you get service? If that is the case, I'm inclined to believe it's your sim. I've seen posts from others where their sim worked perfectly in their TYTN, but once in the HD, it didn't. Something to investigate.
Ive tried my friends o2 sim cards and same problem no service message, im starting to regret getting the htc touch hd as i really wanted it in the o2 network.
MIA said:
Ive tried my friends o2 sim cards and same problem no service message, im starting to regret getting the htc touch hd as i really wanted it in the o2 network.
Click to expand...
Click to collapse
MIA,
Have you tried it in GSM mode? It's really impossible that you can't get even the most basic of things running (excluding things like 3G or HSPDA).
Don't give up, just keep tinkering around in the phone settings.
Cheers.
Ive tried everything that has been suggested. this phone is driving me
MIA said:
Ive tried everything that has been suggested. this phone is driving me
Click to expand...
Click to collapse
MIA,
I'm really sorry, but I have no idea why it isn't working. The only thing I can tell you is to go into an O2 store and keep asking to try different SIMs and explain your issue. I simply cannot imagine why a sim would not work on one GSM network but it does for others.
That just baffles me.
Cheers.
ive tried brand new o2 sim card in the phone and same issue again, it recognises the sim card and configures settings but still same problem with no service on the reception bar its just got a ! mark next to it.
Hi
I have just bought a diamond 2.
I have put my SIM card in and when I switch the phone on it comes up saying the SIM is missing. I have tried cleaning the SIM and re-inserting and even padding out with some paper. Unfortunately none of this has worked and the phone remains just as useless to me.
Apparently it is SIM-locked to O2, I am using a working O2 SIM. Does this mean that it might be SIM-locked to someother network or is it a hardware fault or could it be something else?
I have tried plenty of searching but that has yielded nothing so far.
Thanks for any answers
Jim
Hi
Have you bought this second hand? Perhaps it is locked for contract use and you are using Pay As You Go? It might also have been reported stolen and deactivated.
Do you know the SIM works, have you tried it in another phone?
Options are, try another O2 SIM, if that doesn't work contact O2 and ask them to check it, they might be able to tell you why the phone isn't accepted on their network. Alternatively contact the seller maybe?
If it is new of course take it back to the O2 shop and get them to check it, it could well be faulty.
Regards
Phil
Thanks for your response Phil
I have tried 2 different working O2 SIM's in the phone and they both don't work.
I'm thinking that because its saying SIM is missing it is not seeing the SIM as opposed to it being SIM-locked.
I have contacted the seller and he insists that it worked fine on O2.
I am really dissapointed as I was really looking forward to using this phone
I had exactly the same when I first powered up my TD2 - and I know my SIM worked.....
I found that I cleaned the sim by running on my t-shirt (obvious) - and then reinserted - with the same problem....
Then I pushed the card hard in both lateral and vertical directions - push the end of the sim towards the edge of the phone and then push down on the sim - it didnt even look like it moved to me - but when I put the battery back in - presto it worked.....
I'll give that a try, thanks
no joy with that.
Thankfully the seller has offered me a refund, just need to buy another one sharpish
Hello all, I bought a used HD2 off CL (USA), hoping to unlock it (if locked) and use it with my ATT prepaid sim.
Outwardly, the phone looks fine and everything about it works quite nicely, EXCEPT that when I insert my SIM card and start the phone, it shows me an exclamation mark on the antenna icon. When I disable all wireless connections and then re-enable it, the icon now changes to the SIM card icon with an 'x' next to it, and I am shown a screen with a keypad and the following message: 'The SIM card is missing. You can still make emergency calls if your service provider supports it.'
Thinking it was a ROM issue, I successfully loaded the latest ROM from [showthread.php?t=789506] but it did not resolve the issue. There is no issue with the SIM because it works nicely with my AT&T Samsung a607. There are no signal strength issues either.
Please help!
Can someone please provide some insight on my situation? I hope I haven't posted in the wrong forum; if so, mods may move it to the appropriate place.
Any advice on diagnosing the issue will be appreciated; I don't even know why the phone is acting the way it is. Many thanks!
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Thanks much for the reply. Other phones usually prompt for a SIM unlock code by themselves... why doesn't this one?
Running simlock.exe from Windows does give me the message "Network is locked, please input unlock code". Before I buy the code, I want to make sure that there's nothing physically wrong with the phone. It should give me at least *some* sign that my SIM is being recognized, but rejected due to network-locking, no?
Thanks again!
See thats the thing. With a foreign SIM card in the device, IF LOCKED, simlock.exe should run automatically on startup and ask for the code....so honestly I do not know if your device is messed up somehow, or if its just being wonky for the sake of being wonky. Perhaps you might want to flash a new Radio ROM and see if it then recognizes your SIM. BE SURE to NOT flash one with .51 in its name.
Thanks again. Can you point to a thread with detailed instructions for flashing a new radio ROM for my device? I found many threads while searching and I am confused. I don't want to choose the wrong instructions and brick this device; I haven't done anything of this sort before.
Look at the top of these forums for a stickie by Snarksneeze that will teach you everything you need to know.
Hi again... I don't have a spare 8GB MicroSD card lying around. Is there any way I can do this flashing over USB? I did read that there's a risk associated with flashing over USB (cable yanks, power loss, etc.) but I did flash the newest ROM without any issue, and hopefully I can do the same for the new Radio ROM.
The Radio version shown in the 'About Phone' section is 2.14.50.04, btw.
You can use your 16GB that came with the phone, or any other one for that matter. That requirement is more of a recomendation really. I have flashed with my stock 16GB many times. And yes, you can do it via USB aswell.
OK, so I have more information about the problem. I got the phone unlocked (I heartily recommend 'fastunlocker' on eBay) thinking that it would solve the issue... but it didn't. But, on a lark, I tried my friend's post-paid T-Mobile SIM in the HD2 and it worked! My AT&T pre-paid SIM does not... can this be a problem? The damn thing works nicely in other (unlocked) phones.
Is anyone else successfully using a AT&T GoPhone (prepaid) SIM on a TMOUS HTC HD2?
It may very well be the problem then. I have heard that some phones are incompatible with pre-paid SIMs.
God, that would suck donkeyballs. Can someone confirm that an unlocked TMOUS HD2 does not work with AT&T GoPhone prepaid SIMs?
had this same exact issue and realized that one of the pins in the sim card reader was stuck in the down position. I poked it with a small screwdriver and it popped back into place. works like a charm now.
Thanks for the reply. Are you sure this is the issue? As I mentioned in a previous post in this thread, my friend's T-Mobile SIM works nicely with the phone.
EDIT: Also, are you using it with an AT&T GoPhone SIM?
Bump... anyone?
Final bump: maybe I am SOL. :'(
Is anyone successfully using a TMOUS HD2 with an AT&T Prepaid (GoPhone) SIM?
Give it some time. Sometimes threads at XDA stay dormant for months and then suddenly BAM! a breakthrough happens.
I would say its your sim. How old is it?
I had the exact same problem. I bought a HD2 off cl and put my sim in and got the no sim message and exclamation point. I was using a sim from the voicesteam days but guess what it worked just fine in the Nexus one I had just gotten so I figured it had to be the phone. I finally used a friends sim and it worked fine. So I would turn the phone off in settings then slip his sim out with the battery still in and put my sim in and turn the phone back on. Guess what, it would work for about 10 min then it would suddenly go back to no sim message. So I went and got a new sim from T-Mobile and walla works like a charm. So try what I did and if you end up with the same problem try a new sim from AT&T. I don't know what is different about the HD2 but there something about the older sims that it doesn't like.
Hope that helps!
Hey... thanks for ther reply! My SIM is brand new (about two weeks old). I will however go to the AT&T store and get it replaced to see if it fixes the problem. Thanks again, I appreciate it.
Dear look my problem...
ashasaur said:
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Click to expand...
Click to collapse
-----------
I have a HTC HD2 working excellent with my card. Some day i received message : card is missing ....like you.
But restarting 2-3 times all ok. In a week the same problem again here.
Now i cant make a call. The same card in another hd2 works good. Any other card in MINE phone is missing...
Please help me.
Many thanks
[email protected]
Ok so since nobody wishes to answer in direct rom forums, I'm going to ask my question here. I was very successful with Android as that's easy. Installing WP7 was also a breeze and the whole unlock thing cool. Problem is no matter what WP7 rom I try I always have an "Invalid Sim" error emergency call only. I am in canada with my provider being WIND mobile. Am I correct in saying that windmobile sims just dont work with windows mobile? or is anyone else having the same issue or is there a fix for this. All i am asking for is a simple "proper" response without the flaming. I've searched. I'm not new to xda but i am new to wp7. thank you
WOW Ok..
Can you borrow a different carriers SIM (from friends / family / colleagues) to test with, see if that works? That would help to understand if it is your SIM or the install of WP7. TBH it does sound like it is the SIM that is at issue.
edit: I just checked and the HTC connection setup app (from the market) does list both Canada and WIND, try it
Hey first of all thanks for a response. I'm also thinking it's not the sim (i'll try my wife's rogers sim card when she gets in from work.) because it works perfect with winmo 6.5 and Android without issue. I tried 3 WP7 roms and none worked with the sim..which boggles me
OK so after using my wife's rogers sim card it worked perfectly so it IS the wind mobile card that is not compatible with wp7. I guess i need to find a way to make it compatible if there is one.
I've gotten sim errors on my real hd7. To fix it, I have pulled the battery and reseated the sim. You might try to get a new sim from your carrier, just tell them your old one is acting up.
Tried that a few times and figure it may just be my SIM period although it's strange that it works without error with the android roms. But yeah imma go into Wind and grab a replacement and see how that goes
daeshawn said:
Tried that a few times and figure it may just be my SIM period although it's strange that it works without error with the android roms. But yeah imma go into Wind and grab a replacement and see how that goes
Click to expand...
Click to collapse
Did a new SIM help you, or did you do anything else?
After I have entered my PIN my sim is working fine, but after some time it says Invalid SIM.
/Regards Lars
I think it's an issue with the Roms. I think there are a lot of people getting the invalid sim error. I use the BlackSideSeven rom and I've seen several posts about it in the thread. There are also several other threads started about possible fixes and stuff.
Here's a link.
The easiest way to resolve is to turn on airplane mode and then switch it off. It doesn't stop it from happening, but at least you don't need to reboot.
Error in Android as well
I am having the same problem with MDJ Froyo 2.2. When I reboot into winmo 6.5 great signal all fine. I did notice that the simm card did move in the slot possibly bad connection. Now that I reseated the Simm all is fine. I also just read about antenna issue with the HD2 going to open and fix it to see if that helps.