[Q] Jelly-blast V3 installation HELP? - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

I have been trying to install jellyblast v3 the latest build! it flashes perfect it boots up then as instructed i flahed the csc for my phone via ODIN it boots straght back up after its installed but it just wont let me call out send texts or even get on the internet now i have been told if i flash the correct csc file my phone should call out ETC but it just wont can anyone help am i doing something wrong ? help im stuck with this crap stock rom

Yes
STEVE.XR said:
I have been trying to install jellyblast v3 the latest build! it flashes perfect it boots up then as instructed i flahed the csc for my phone via ODIN it boots straght back up after its installed but it just wont let me call out send texts or even get on the internet now i have been told if i flash the correct csc file my phone should call out ETC but it just wont can anyone help am i doing something wrong ? help im stuck with this crap stock rom
Click to expand...
Click to collapse
Follow the steps very carefully...
1.turn on usb debugging
2.disable antivirus and antitheft
3.Download jb3 and put into sd card(not inside any file)just put it in root
4.go into recovery
5.go into cwm recovery
6.wipe data/cache
7.go to apply from sdcard
8.chose jb3 singed.zip
9.choose yes
finish you are done....
may be ure jb3 file is corrupt so download a fresh copy then install ota2 then ota3 then ota 4
remember dont install ota4 directly it may cause error

hariskoirala said:
Follow the steps very carefully...
1.turn on usb debugging
2.disable antivirus and antitheft
3.Download jb3 and put into sd card(not inside any file)just put it in root
4.go into recovery
5.go into cwm recovery
6.wipe data/cache
7.go to apply from sdcard
8.chose jb3 singed.zip
9.choose yes
finish you are done....
may be ure jb3 file is corrupt so download a fresh copy then install ota2 then ota3 then ota 4
remember dont install ota4 directly it may cause error
Click to expand...
Click to collapse
I have done all of these steps perfectly still no success My phone just doesn't like this ROM lol

Try this!
Judging from your post it would seem that you have no problem flashing JellyBlast v3, and that the problem actually lies in the flashing of your country's CSC.
Here's the instructions i followed (found this on the JellyBlast Thread, credits go to thirdczee:
1. Back up your ROM using CWM as this procedure will wipe data
2. Use Odin and flash the lates CSC of your region (remember when you extract the zip from doky it contains 3 files right? just use csc no need for the other two)
3. After flashing boot your phone and dial *#272*( your phone IMEI)#
4. Next a pop up menu will appear now select your carrier (ex. here in Philippines my carrier is SMART so i choose SMA from the menu)
5. Phone will reboot to stock recovery, change CSC, and at the same time wipe data
6. Phone will now boot up and voila no more annoying sending of sms to India
7. But wait! Your phone just got data wipe! This is where the backup comes in
8. Reboot to CWM
9. Choose backup and restore >>> Advance Restore >>> Select your ROM back up >>> Restore data
10. Now you have successfully changed CSC. no more annoying text message being sent and you got your apps and data back
Note: Kernel must have stock recovery so savie#62/#73, White 8 rc3, or any other kernel with CWM built-in recovery i am not sure if it will change CSC as i used my own kernel which has stock recovery not CWM built-in
Click to expand...
Click to collapse
My note: If you didn't touch the kernel in which JBv3 was built with, I believe you won't need to worry as long as you follow the instructions perfectly
P.S. Good luck and please post if it works.

AndrewLoyard said:
Judging from your post it would seem that you have no problem flashing JellyBlast v3, and that the problem actually lies in the flashing of your country's CSC.
Here's the instructions i followed (found this on the JellyBlast Thread, credits go to thirdczee:
My note: If you didn't touch the kernel in which JBv3 was built with, I believe you won't need to worry as long as you follow the instructions perfectly
P.S. Good luck and please post if it works.
Click to expand...
Click to collapse
mate tried the lot I think my phone is defective.

steve.xr said:
mate tried the lot i think my phone is defective.
Click to expand...
Click to collapse
pal try another rom then...i recommend hyperione :d

STEVE.XR said:
I have done all of these steps perfectly still no success My phone just doesn't like this ROM lol
Click to expand...
Click to collapse
let try room creed's room 3.5

STEVE.XR said:
mate tried the lot I think my phone is defective.
Click to expand...
Click to collapse
Damn! That sucks. Sorry, I can't help you any further, I have no idea what else to do.

Related

[Q] How to install room ( XtreStoLite )

I just got a brand new Samsung G900F. I was able to root it successfully and now i'd like to install the XtreStoLite room.
The install instruction say
- Do a Data/Factory reset first in your recovery
- Start the installation
- Reboot
- Enjoy the Rom!
- Optionally: Flash the Aroma add-on Package, to restore some of the removed Samsung Apps/Functions that you want (You can do this anytime!)
Click to expand...
Click to collapse
Besides reboot I don't know how to do any of those steps. If anyone could explain to me how to install it I'd be very grateful.
Thanks
dubstax said:
I just got a brand new Samsung G900F. I was able to root it successfully and now i'd like to install the XtreStoLite room.
The install instruction say
Besides reboot I don't know how to do any of those steps. If anyone could explain to me how to install it I'd be very grateful.
Thanks
Click to expand...
Click to collapse
You must have a Custom Recovery installed (Philz Touch, TWRP...), you can find them in Android Development section, download then flash it via Odin. Then go to Recovery Mode by pressing the following combination keys: VOLUME UP + POWER + HOME BUTTON. Then follow the instructions above.
Good luck bro
Warning: If you using towelroot, you will trip knox anyway if flashing any custom recovery. If not, so just forget what I just said.
babygau said:
You must have a Custom Recovery installed (Philz Touch, TWRP...), you can find them in Android Development section, download then flash it via Odin. Then go to Recovery Mode by pressing the following combination keys: VOLUME UP + POWER + HOME BUTTON. Then follow the instructions above.
Good luck bro
Warning: If you using towelroot, you will trip knox anyway if flashing any custom recovery. If not, so just forget what I just said.
Click to expand...
Click to collapse
I appreciate the quick reply but i'm not much smarter yet..
Whats the custom recovery and why do I need it before installing a custom ROM? I did "root" my phone already with Odin.
So I downloaded Philz Touch but i'm not sure what to do with the zip file and Odin.
A step-by-step would be very helpful. I really woudn't want to brick my phone. Thanks
I will explain to you some definitions first
1. Custom recovery will overwrite your phone stock recovery. It has many features that stock one does not. Such as: backup/restore your rom, install custom zip/ota update (install custom kernel, custom rom) and many more...
2. According to 1. To install a custom rom, you must have a custom memory first, right? Because custom rom mostly is packaged in a zip file. You can't use Odin to flash it as you did with a stock firmware
There is no chance you will brick your phone mate if you do the following instruction carefully. Provided that, you have your custom rom put into your internal memory or sd card.
1. Use Odin to flash Philz Touch recovery. Its steps are exactly as the same as you root
2. After flashing Philz Touch, your phone will automatically reboot, turn off your phone after that
3. Now, enter recovery mode by pressing a combination keys as I said above
4. After a few seconds, you will see recovery menu.
5. Choose wipe data/factory reset - > clean install a new rom
6. Choose install from zip - > install from sd card if you put your custom rom in internal memory OR install from sd card 1 if yours is in sd card - > choose the rom and install. Follow its instruction and reboot
THATS IT.
babygau said:
I will explain to you some definitions first
1. Custom recovery will overwrite your phone stock recovery. It has many features that stock one does not. Such as: backup/restore your rom, install custom zip/ota update (install custom kernel, custom rom) and many more...
2. According to 1. To install a custom rom, you must have a custom memory first, right? Because custom rom mostly is packaged in a zip file. You can't use Odin to flash it as you did with a stock firmware
There is no chance you will brick your phone mate if you do the following instruction carefully. Provided that, you have your custom rom put into your internal memory or sd card.
1. Use Odin to flash Philz Touch recovery. Its steps are exactly as the same as you root
2. After flashing Philz Touch, your phone will automatically reboot, turn off your phone after that
3. Now, enter recovery mode by pressing a combination keys as I said above
4. After a few seconds, you will see recovery menu.
5. Choose wipe data/factory reset - > clean install a new rom
6. Choose install from zip - > install from sd card if you put your custom rom in internal memory OR install from sd card 1 if yours is in sd card - > choose the rom and install. Follow its instruction and reboot
THATS IT.
Click to expand...
Click to collapse
thanks for the clarification mate. the only thing i'm having trouble to understand now is how to load philz touch on to my phone with odin.
so i got a zip file with a recovery.img file and a folder META-INF. How do I add it to Odin?
Nope, you downloaded the wrong one. File name should be ended with tar.md5
---------- Post added at 03:22 PM ---------- Previous post was at 03:19 PM ----------
Link here, choose the latest one goo.im/devs/philz_touch/CWM_Advanced_Edition/klte
babygau said:
Nope, you downloaded the wrong one. File name should be ended with tar.md5
Click to expand...
Click to collapse
ah, yea that sounds better.
Do i have to put the phone in to the download mode first or just connect it and install philz_touch with Odin?
Always enter download mode when you use Odin bro
babygau said:
Always enter download mode when you use Odin bro
Click to expand...
Click to collapse
Good to know.
I just did everything like you said and it worked perfect! thanks a ton mate :good:
You are welcome. I'm glad it helped ?

LG L5 philzmod error

hi guys
I installed (Kinguser) and root my phone via it , then I installed philz mod (philz v.6.0.img) using flash tools (rasher) to install new ROM .However, it doesn't work ,So I restored my old ROM and all files and my Device return as it was and No problems yet , then
when I was playing in the recovery (try all tasks) , I have press ( philz settings\rerootsystem(supersu)\yes), then tried to boot operating system (android), but the Device didn't boot it , when I run my Device it Automatically boot to recovery (philz) , I tried more than once , It always boot the recovery or didn't boot any thing (still show LG logo)
notes:
I have another same Device
my recovery version: cwm:v.6.0.4.8 \philz:v.6.27.5
I tried to restore Backup (from my another same Device),but didn't work​
hm,please say me what rom you installed (android version,romname,kernel),is your bootloader unlocked,etc!!!!
..
-CALIBAN666- said:
hm,please say me what rom you installed (android version,romname,kernel),is your bootloader unlocked,etc!!!!
Click to expand...
Click to collapse
ROM version: lollepop
kernel: (I don't think what was name, but it was for LG devise)
I don't know if my devise was unlocked bootloader, but before I install recovry I was unlooked bootloader and when I make backup file, the devise was unlooked bootloader(note:I make the backup from my another devise)
I don't think the problem in the ROM or the backup becuse the problem start when I press (reroot,,,,,)
I'm reedy for all athoer QQ
and that is my email:
[email protected]
And sry for printed mistakes
simply use the latest twrp2.8.6.0 recovery from aidasaidas75 than it should be fixed i think.
link to aidas thread below me,greeeeeeetz!!!!!
http://forum.xda-developers.com/opt...recovery-twrp-2-8-0-1-touch-recovery-t2877143
.
-CALIBAN666- said:
simply use the latest twrp2.8.6.0 recovery from aidasaidas75 than it should be fixed i think.
link to aidas thread below me,greeeeeeetz!!!!!
http://forum.xda-developers.com/opt...recovery-twrp-2-8-0-1-touch-recovery-t2877143
Click to expand...
Click to collapse
Ok, I download the file (trwp2.8.6.0.zip) and tried to install it via philz recovry (install zip/choose zip from strong sdcard /twrp.2.8.6.0-e612-aidasaidas75.zip/yes)
Then I get masseg (installation aborted)
Now, how I install twrp recovry??
Note:I tried download (twrp flshable.zip) and install it .and install complete then restart the recovry but nothing changed
wiating you
..
...
.
Guys
I need hellp :crying:​
AhMaD eLMoMaNi said:
Ok, I download the file (trwp2.8.6.0.zip) and tried to install it via philz recovry (install zip/choose zip from strong sdcard /twrp.2.8.6.0-e612-aidasaidas75.zip/yes)
Then I get masseg (installation aborted)
Now, how I install twrp recovry??
Note:I tried download (twrp flshable.zip) and install it .and install complete then restart the recovry but nothing changed
wiating you
Click to expand...
Click to collapse
I still wait for the solution, Please help me
try flash with latest cwm or with terminal emulator,in normal case it must work.
,
-CALIBAN666- said:
try flash with latest cwm or with terminal emulator,in normal case it must work.
Click to expand...
Click to collapse
that's hard for me , pleas tell me how i flash it useing terminal emulator when i cant open OS ?!!
is root Reason the problem ? because the problem start when I reroot the device using the recovery
when I reroot the device , when I restart it using recovery tell me [root access is missi] is the root necessary to operate OS ?
I tried press yes-apply root (/system/xbin,,,,,,ETC) and nothing changed
can you give me skype or facebook or any thing can we chat with it

ZE500KL (Z00ED) Soft-bricked... (bootlooping on Asus logo, doesnt even show ROM logo)

Hello...
So, me, a dumbass, decided to try to encrypt the phone while it was rooted... Everything went wrong, and on the first reboot it started rebooting non-stop(on the Asus logo)... I left it for some time but nothing changed.
I tried restoring a backup(system, data and boot), stays the same, tried restoring stock boot and reflashing the rom(ResurrectionRemix) but nothing changed. How do I solve this?
(Note that I have a backup of all stock ROM partitons, except the recovery)
DarkAlpha.Sete said:
Hello...
So, me, a dumbass, decided to try to encrypt the phone while it was rooted... Everything went wrong, and on the first reboot it started rebooting non-stop(on the Asus logo)... I left it for some time but nothing changed.
I tried restoring a backup(system, data and boot), stays the same, tried restoring stock boot and reflashing the rom(ResurrectionRemix) but nothing changed. How do I solve this?
(Note that I have a backup of all stock ROM partitons, except the recovery)
Click to expand...
Click to collapse
wipe everything
Format internal storage
And then restore ur backup
addy692 said:
wipe everything
Format internal storage
And then restore ur backup
Click to expand...
Click to collapse
Already tried that, but anyways, I had to flash stock ROM using AFT... Now my problem is unlocking the bootloader because the dam application that ASUS gives doesn't want to work now... lol
Solve the problem? How? Same problems 4 me.
Genuis Loci said:
Solve the problem? How? Same problems 4 me.
Click to expand...
Click to collapse
Flash stock ROM
You can find stock rom (firmware) on ASUS website support page
Make sure you have your stock recovery installed too, and restore your rom
Genuis Loci said:
Solve the problem? How? Same problems 4 me.
Click to expand...
Click to collapse
I solved by flashing stock ROM with Asus Flash Tool:
ASUS Drivers: https://www.asus.com/Phone/ZenFone-2-Laser-ZE500KL/HelpDesk_Download/ - Select Android OS, then go to "USB" and download the drivers
Website (tutorial on how to use it is linked there): http://www.asus-zenfone.com/2017/03/download-asus-flashtool-10045-for-zenfone-3.html
RAW firmware files: https://forum.xda-developers.com/ze...0a-z00d-z00x-raw-fw-collection-t3448966/page3
In case you don't want to check both RAW files, I posted here the versions of each firmware:
First link: WW_ZE500KL_V12.8.5.222_M3.6.42_Phone-user (Lollipop)
Second link: WW_ZE500KL_13.10.10.44_M3.6.51_Phone-user (Marshmallow)
If you get confused when you need to select the RAW file, go to the extracted folder and there will be it. (I got confused because the folder by itself was named .raw lol)... Also, don't delete any file, as you probably will need them one time later
DarkAlpha.Sete said:
I solved by flashing stock ROM with Asus Flash Tool:
ASUS Drivers: https://www.asus.com/Phone/ZenFone-2-Laser-ZE500KL/HelpDesk_Download/ - Select Android OS, then go to "USB" and download the drivers
Website (tutorial on how to use it is linked there): http://www.asus-zenfone.com/2017/03/download-asus-flashtool-10045-for-zenfone-3.html
RAW firmware files: https://forum.xda-developers.com/ze...0a-z00d-z00x-raw-fw-collection-t3448966/page3
In case you don't want to check both RAW files, I posted here the versions of each firmware:
First link: WW_ZE500KL_V12.8.5.222_M3.6.42_Phone-user (Lollipop)
Second link: WW_ZE500KL_13.10.10.44_M3.6.51_Phone-user (Marshmallow)
If you get confused when you need to select the RAW file, go to the extracted folder and there will be it. (I got confused because the folder by itself was named .raw lol)... Also, don't delete any file, as you probably will need them one time later
Click to expand...
Click to collapse
Hello,
I am on lineageos with twrp installed. And i want comme back on stock, does this how to restore stock recovery?
Thanks
pabonf said:
Hello,
I am on lineageos with twrp installed. And i want comme back on stock, does this how to restore stock recovery?
Thanks
Click to expand...
Click to collapse
By using that method you get everything back to stock. Simple answer: You get back stock ROM and recovery.

A trouble with my N9008

After wiping everything and installing the Lineage OS 15.1 Hltechn,when the system is turned on , the screen turned yellow and then switched to a screen with only time and date . I tried to reboot the system and unlock the screensaver as fast as I can to avoid it but it doesn't work . It still like that , no matter how I press it is useless . How could I do ? I've been reinstall it more then ten times .
Flash stock rom through Odin for a working phone .
Then read the instructions and search the Roms thread for your problem.
99% of problems are user errors .
Or installing a rom not for your model .
----------------------------------------------------------------------------------------------
Install instructions coming from a different ROM (ie. TouchWiz\LineageOS\MIUI etc...):
1. Download ROM, GApps & favoured root method (Magisk / SuperSU)
2. Do full backup in recovery and Internal\SD Card data (at your own risk if you don't)
3. Full Wipe (Caches (Dalvik & Cache), System, Data(Wiping DATA will clear your Apps & App Data - BEWARE!))
4. Install ROM followed by GAPPS & ROOT method.
5. REBOOT!!
Thanks for your promot reply !
I'm sure the ROM I downloaded and installed is correct and I've been already follow the steps you said to install it . But this error still exists . I don't know how to fix it .
What is the model number in download mode? Does it match the ROM you flashed?
JJEgan said:
Flash stock rom through Odin for a working phone .
Then read the instructions and search the Roms thread for your problem.
99% of problems are user errors .
Or installing a rom not for your model .
----------------------------------------------------------------------------------------------
Install instructions coming from a different ROM (ie. TouchWiz\LineageOS\MIUI etc...):
1. Download ROM, GApps & favoured root method (Magisk / SuperSU)
2. Do full backup in recovery and Internal\SD Card data (at your own risk if you don't)
3. Full Wipe (Caches (Dalvik & Cache), System, Data(Wiping DATA will clear your Apps & App Data - BEWARE!))
4. Install ROM followed by GAPPS & ROOT method.
5. REBOOT!!
Click to expand...
Click to collapse
Thanks for your promot reply !
I'm sure the ROM I downloaded and installed is correct and I've been already follow the steps you said to install it . But this error still exists . I don't know how to fix it .
audit13 said:
What is the model number in download mode? Does it match the ROM you flashed?
Click to expand...
Click to collapse
Thanks for your reply !
My Model is Note3(N9008) . It's a model of China . The ROM I download is hltechn , I'm sure it match my phone's model .
Is the phone running the latest bootloader and modem?
audit13 said:
Is the phone running the latest bootloader and modem?
Click to expand...
Click to collapse
I'm not sure because there's a website said that my phone cannot unlock the bootloader .
How could I check them whether running the latest version or not ?

Help with root.

So my situation right now is pretty ****ty, I almost bricked my device, but I got stock firmware form xda and thats okay, I wanted to unroot my phone, opened up supersu but it said that I wasn't rotted, then I went to snapchat it says that oh no your attempt blah blah blah, then I tried to play pokemon go, still same which means that I still have root but I can't unroot, btw I have TWRP installed, what do I do? Oh and my device is SM-G900F.
Flash magisk uninstaller to clean up root
Flash magisk 17.2
Open magisk manager
Goto settings
Hide magisk manager app with random package name
Goto magisk hide
Select snapchat & pokemon go
Sorted - you have a rooted device & can use above apps
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
TheFixItMan said:
Flash magisk uninstaller to clean up root
Flash magisk 17.2
Open magisk manager
Goto settings
Hide magisk manager app with random package name
Goto magisk hide
Select snapchat & pokemon go
Sorted - you have a rooted device & can use above apps
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
thanks, Im gonna try this out.
So yeah, before you answered I tried rooting my phone again and it deleted twrp recovery idk why, now I cant flash anything with odin so thats really bad I'm trying to find how to fix this, it gets stuck on SetupConnection and then just writes Complete(Write) and something else, thanks in advance.
zix3r said:
So yeah, before you answered I tried rooting my phone again and it deleted twrp recovery idk why, now I cant flash anything with odin so thats really bad I'm trying to find how to fix this, it gets stuck on SetupConnection and then just writes Complete(Write) and something else, thanks in advance.
Click to expand...
Click to collapse
Make sure you have installed Samsung USB drivers
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Odin
https://forum.xda-developers.com/attachment.php?attachmentid=4431597&d=1519662712
Twrp
https://dl.twrp.me/klte/
Switch phone off
Put phone in download mode (hold Vol down home button and power button)
Connect phone to PC via USB USB
Push Vol up to start connection
Put twrp image.tar in the AP section of odin
Begin flash
As soon as the phone restarts enter recovery mode by holding Vol up home button & power button.
Failure to immediately enter recovery mode will mean twrp will not stick & you will need to reflash
If it's not flashing change usb cable & try again
You also may want to update your firmware if not already on the latest version - you can either download the entire firmware from sammobile.com or if you are planning on using a custom rom & don't want to download the entire stock firmware you can just update the bootloader and modem
G900FXXU1CQK3_G900FXXU1CRH1
https://duromaticspares.uk/lineageos/G900FXXU1CQK3_G900FXXU1CRH1_Baseband_Firmware.tar
Again put in AP section of odin and flash
I have samsung drivers installed, I'm going to try and change the usb cable, and what is that download link that you sent me? Is it stock firmware?
So ok TWRP worked, but when I try to flash it I get this error:
! Boot image patched by unsupported programs
! Cannot uninstall
Thanks for the help wiith odin :victory: !
zix3r said:
So ok TWRP worked, but when I try to flash it I get this error:
! Boot image patched by unsupported programs
! Cannot uninstall
Thanks for the help wiith odin :victory: !
Click to expand...
Click to collapse
What are you trying to flash? Magisk?
Sounds like you have previous kernel mods that are not allowing magisk to flash
Best thing to do here is flash stock rom via odin and start again
Goto sammobile.com and download the latest firmware and flash via odin
Once flashed goto recovery (it will now be stock recovery) and perform a format data/factory reset
Obviously backup any files to pc before you do the above
The other link was the update for modem & Bootloader which saves downloading the entire latest firmware
Flash in odin - place in AP section
However since you are going to be downloading the entire firmware as long as it's the latest version you don't need this
TheFixItMan said:
What are you trying to flash? Magisk?
Sounds like you have previous kernel mods that are not allowing magisk to flash
Best thing to do here is flash stock rom via odin and start again
Goto sammobile.com and download the latest firmware and flash via odin
Once flashed goto recovery (it will now be stock recovery) and perform a format data/factory reset
Obviously backup any files to pc before you do the above
The other link was the update for modem & Bootloader which saves downloading the entire latest firmware
Flash in odin - place in AP section
However since you are going to be downloading the entire firmware as long as it's the latest version you don't need this
Click to expand...
Click to collapse
The thing it doesnt let me download the latest firmware, it says that free download is not avaible, and I need to buy premium but I I am not doing that.
Oh and does it matter what country I choose?
zix3r said:
Oh and does it matter what country I choose?
Click to expand...
Click to collapse
Sammobile.com free servers keep going up and down like yoyos
Use this one (choose slow speed for free download)
https://samsung-firmware.org/download/GALAXY__S5__/1l88/BTU/G900FXXU1CRH1/G900FOXA1CRH1/
So I flashed this rom with ODIN now I am going to try and install twrp then try to flash magisk uninstaller.
https://forum.xda-developers.com/ga...m-official-android-6-0-1-marshmallow-t3319376
:fingers-crossed:
Still not working and plus, the link that you sent me will be downloading for 17-10 hours so thats really bad cause my internet speed is way better.
TheFixItMan said:
Sammobile.com free servers keep going up and down like yoyos
Use this one (choose slow speed for free download)
https://samsung-firmware.org/download/GALAXY__S5__/1l88/BTU/G900FXXU1CRH1/G900FOXA1CRH1/
Click to expand...
Click to collapse
here
zix3r said:
Still not working and plus, the link that you sent me will be downloading for 17-10 hours so thats really bad cause my internet speed is way better.
Click to expand...
Click to collapse
I'll download it for you & upload it - will take a few hours
TheFixItMan said:
I'll download it for you & upload it - will take a few hours
Click to expand...
Click to collapse
Thanks, you've been very helpful, I see the thanks meter, but I dont know how to thank you, how do I do it?
zix3r said:
Thanks, you've been very helpful, I see the thanks meter, but I dont know how to thank you, how do I do it?
Click to expand...
Click to collapse
Most free servers are offline for maintenance - when they are back up I'll download it & upload it
The thanks button is below each post (don't think it shows on the app but I don't use it)
zix3r said:
Thanks, you've been very helpful, I see the thanks meter, but I dont know how to thank you, how do I do it?
Click to expand...
Click to collapse
What you can do in the mean time is try this
Goto download mode and flash the modem & Bootloader files I posted earlier
Backup anything in internal storage you want to keep to pc
Goto twrp
Wipe
Format data (option on the right)
Restart to recovery
Wipe
Advanced wipe
Wipe system data cache
Install
Select Los 15.1 zip https://download.lineageos.org/klte
Select mind the gapps (arm) http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Select magisk 17.3
Restart
TheFixItMan said:
What you can do in the mean time is try this
Goto download mode and flash the modem & Bootloader files I posted earlier
Backup anything in internal storage you want to keep to pc
Goto twrp
Wipe
Format data (option on the right)
Restart to recovery
Wipe
Advanced wipe
Wipe system data cache
Install
Select Los 15.1 zip https://download.lineageos.org/klte
Select mind the gapps (arm) http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Select magisk 17.3
Restart
Click to expand...
Click to collapse
What is lineage OS and whats so special about it?
zix3r said:
What is lineage OS and whats so special about it?
Click to expand...
Click to collapse
Custom rom based on the latest Android source code (although Los 16 based on Android pie is still in beta so stick Los 15.1 based on oero) - no Samsung bloat and more customized features
You can find more details on the lineageos website

Categories

Resources