Database Users

[Q] Jelly-blast V3 installation HELP?

I have been trying to install jellyblast v3 the latest build! it flashes perfect it boots up then as instructed i flahed the csc for my phone via ODIN it boots straght back up after its installed but it just wont let me call out send texts or even get on the internet now i have been told if i flash the correct csc file my phone should call out ETC but it just wont can anyone help am i doing something wrong ? help im stuck with this crap stock rom

Yes
STEVE.XR said:
I have been trying to install jellyblast v3 the latest build! it flashes perfect it boots up then as instructed i flahed the csc for my phone via ODIN it boots straght back up after its installed but it just wont let me call out send texts or even get on the internet now i have been told if i flash the correct csc file my phone should call out ETC but it just wont can anyone help am i doing something wrong ? help im stuck with this crap stock rom
Click to expand...
Click to collapse
Follow the steps very carefully...
1.turn on usb debugging
2.disable antivirus and antitheft
3.Download jb3 and put into sd card(not inside any file)just put it in root
4.go into recovery
5.go into cwm recovery
6.wipe data/cache
7.go to apply from sdcard
8.chose jb3 singed.zip
9.choose yes
finish you are done....
may be ure jb3 file is corrupt so download a fresh copy then install ota2 then ota3 then ota 4
remember dont install ota4 directly it may cause error

hariskoirala said:
Follow the steps very carefully...
1.turn on usb debugging
2.disable antivirus and antitheft
3.Download jb3 and put into sd card(not inside any file)just put it in root
4.go into recovery
5.go into cwm recovery
6.wipe data/cache
7.go to apply from sdcard
8.chose jb3 singed.zip
9.choose yes
finish you are done....
may be ure jb3 file is corrupt so download a fresh copy then install ota2 then ota3 then ota 4
remember dont install ota4 directly it may cause error
Click to expand...
Click to collapse
I have done all of these steps perfectly still no success My phone just doesn't like this ROM lol

Try this!
Judging from your post it would seem that you have no problem flashing JellyBlast v3, and that the problem actually lies in the flashing of your country's CSC.
Here's the instructions i followed (found this on the JellyBlast Thread, credits go to thirdczee:
1. Back up your ROM using CWM as this procedure will wipe data
2. Use Odin and flash the lates CSC of your region (remember when you extract the zip from doky it contains 3 files right? just use csc no need for the other two)
3. After flashing boot your phone and dial *#272*( your phone IMEI)#
4. Next a pop up menu will appear now select your carrier (ex. here in Philippines my carrier is SMART so i choose SMA from the menu)
5. Phone will reboot to stock recovery, change CSC, and at the same time wipe data
6. Phone will now boot up and voila no more annoying sending of sms to India
7. But wait! Your phone just got data wipe! This is where the backup comes in
8. Reboot to CWM
9. Choose backup and restore >>> Advance Restore >>> Select your ROM back up >>> Restore data
10. Now you have successfully changed CSC. no more annoying text message being sent and you got your apps and data back
Note: Kernel must have stock recovery so savie#62/#73, White 8 rc3, or any other kernel with CWM built-in recovery i am not sure if it will change CSC as i used my own kernel which has stock recovery not CWM built-in
Click to expand...
Click to collapse
My note: If you didn't touch the kernel in which JBv3 was built with, I believe you won't need to worry as long as you follow the instructions perfectly
P.S. Good luck and please post if it works.

AndrewLoyard said:
Judging from your post it would seem that you have no problem flashing JellyBlast v3, and that the problem actually lies in the flashing of your country's CSC.
Here's the instructions i followed (found this on the JellyBlast Thread, credits go to thirdczee:
My note: If you didn't touch the kernel in which JBv3 was built with, I believe you won't need to worry as long as you follow the instructions perfectly
P.S. Good luck and please post if it works.
Click to expand...
Click to collapse
mate tried the lot I think my phone is defective.

steve.xr said:
mate tried the lot i think my phone is defective.
Click to expand...
Click to collapse
pal try another rom then...i recommend hyperione :d

STEVE.XR said:
I have done all of these steps perfectly still no success My phone just doesn't like this ROM lol
Click to expand...
Click to collapse
let try room creed's room 3.5

STEVE.XR said:
mate tried the lot I think my phone is defective.
Click to expand...
Click to collapse
Damn! That sucks. Sorry, I can't help you any further, I have no idea what else to do.

Cant open play store or connect to any google account

After installing MedroM I got this problem and couldn't connect to google account and every google app would crash if I tried to log in, so I flashed b161 and I still have this problem, even after numerous factory resets, has this ever happened to anyone ?

Yes, it is happening to other guys around here...
In fact is happening to all who flash B160/B161 firmware...
Is not possible to flash any firmware previously to B160/B161.
Workaround is to unlock bootloader, flash twrp, root it, reflash oeminfo for your device,
and after that you can flash another firmware again.

gtdaniel said:
Yes, it is happening to other guys around here...
In fact is happening to all who flash B160/B161 firmware...
Is not possible to flash any firmware previously to B160/B161.
Workaround is to unlock bootloader, flash twrp, root it, reflash oeminfo for your device,
and after that you can flash another firmware again.
Click to expand...
Click to collapse
i'm in the same situation, i tried to do what you've said, but twrp says that the installation failed. how can I have play store working again? please help, this situation is driving me crazy!
i'm on c900 b161.

I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
After 2 days of trying different stuff, here's what gave me a functional device with TWRP and Root back:
-Back up any data you want to keep, obviously.
-Reflash stock ROM (put UPDATE.APP on your dload/ folder on the separate SD card, then boot into the update function by turning the phone off and then holding Vol+, Vol-, Power. Just wait until it's finished.
-Unlock Bootloader again
-Download the Toolkit: http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873
-Flash TWRP through the toolkit
-Boot TWRP and root
-In Android, enable ADB
-In the Toolkit, go to Dual Sim>Individual and select the appropriate custom.bin and oeminfo.img from the thread of the toolkit. For my European one it was L31 SS C432. Press flash and grant Root permissions on your phone.
-Turn off your phone and flash the stock ROM again like in step 1.
-If you want root, you need to unlock the Bootloader again, flash TWRP and then root it from there.
DON'T WIPE ANYTHING IN TWRP OR YOU WILL HAVE TO START ALL OVER AGAIN!
Don't ask me how I know.
Hope this saves someone from wasting their time with this nonsense like I have.

No need to touch the oem stuff, just extract the boot.img and system.img and flash through adb, for dat you need bootloader unlocked and fastboot drivers then you can downgrade firmware and fix your sign problem or just wait for a new firmware

raffabraz said:
No need to touch the oem stuff, just extract the boot.img and system.img and flash through adb, for dat you need bootloader unlocked and fastboot drivers then you can downgrade firmware and fix your sign problem or just wait for a new firmware
Click to expand...
Click to collapse
That would be much simpler, I didn't consider that. Would you mind writing up a guide?

I've had the same issue and have resolved it pretty easily,
i did the following steps ;
- download both medrom versions
- do full factory reset
- install medrom v1
- do all settings of google etc
- reboot recovery and install v2
- wipe dalvik and reboot
-- all works now except for the forceclose on facebook
ps : this answer is also in the thread ( not as extended as this but it's there )
Edit : some other apps are Force closing to, my guess is that there's a shared resource of some kind that's corrupted or something..

sirlex said:
I've had the same issue and have resolved it pretty easily,
i did the following steps ;
- download both medrom versions
- do full factory reset
- install medrom v1
- do all settings of google etc
- reboot recovery and install v2
- wipe dalvik and reboot
-- all works now except for the forceclose on facebook
ps : this answer is also in the thread ( not as extended as this but it's there )
Edit : some other apps are Force closing to, my guess is that there's a shared resource of some kind that's corrupted or something..
Click to expand...
Click to collapse
Force closing is caused by the oeminfo in my experience. Can you check in the "About Phone" section which build number your phone currently has? Should be something along the lines of "VNS-L31C432B161" where C432 indicates the region code.

since I am Running MEDROM v2 it shows just that. However , I do know it is based on b161

HeavyHDx said:
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
After 2 days of trying different stuff, here's what gave me a functional device with TWRP and Root back:
-Back up any data you want to keep, obviously.
-Reflash stock ROM (put UPDATE.APP on your dload/ folder on the separate SD card, then boot into the update function by turning the phone off and then holding Vol+, Vol-, Power. Just wait until it's finished.
-Unlock Bootloader again
-Download the Toolkit: http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873
-Flash TWRP through the toolkit
-Boot TWRP and root
-In Android, enable ADB
-In the Toolkit, go to Dual Sim>Individual and select the appropriate custom.bin and oeminfo.img from the thread of the toolkit. For my European one it was L31 SS C432. Press flash and grant Root permissions on your phone.
-Turn off your phone and flash the stock ROM again like in step 1.
-If you want root, you need to unlock the Bootloader again, flash TWRP and then root it from there.
DON'T WIPE ANYTHING IN TWRP OR YOU WILL HAVE TO START ALL OVER AGAIN!
Don't ask me how I know.
Hope this saves someone from wasting their time with this nonsense like I have.
Click to expand...
Click to collapse
Thank you so much , you saved my phone !!
Fllashing stock rom again isnt necessary , just flash the oeminfo, reboot, they will tell you an encryption password, so you have to do a factory reset AND DONE !

simo255 said:
Thank you so much , you saved my phone !!
it doesn't need to reflash stock rom again, just flash the oeminfo, reboot, they will tell you an encryption password, so you have to do a factory reset AND DONE !
Click to expand...
Click to collapse
Interesting, when I tried to do a factory reset after that screen, it always failed.

HeavyHDx said:
Interesting, when I tried to do a factory reset after that screen, it always failed.
Click to expand...
Click to collapse
You have to flash the stock recovery to do a Factory reset

medRom v2 fix
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.

Could someone provide me the correct oeminfo and custom.bin for a European/German model? C432? The images inlcuded in the toolkit don't work for me, it still crashes or can't communicate with the google server

Deddline said:
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Click to expand...
Click to collapse
Installing Android System Web View apk from apkmirror solved the problem for me (arm + x86 package). Thank you

HeavyHDx said:
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
Click to expand...
Click to collapse
I got my P9 Lite from Congstar in Germany. I didn't knew, that the device would be branded by Telekom. I flashed the B161 and couldn't connect to any google account. Thankfully updating the webview apk via apk mirror solved this problem. But this leaves me with 2 questions and maybe you could answer these...?
1) Do you know which stock rom would work the best with my device (VNS-L31 without the possibility to use two sim cards ) and where I could download this stock rom.
2) Is the B161 supposed to work fine after solving this issue or are there other problems with it?
I would be really happy if someone of you could help me. :good:

MartinMo said:
1) Do you know which stock rom would work the best with my device (VNS-L31 without the possibility to use two sim cards ) and where I could download this stock rom.
2) Is the B161 supposed to work fine after solving this issue or are there other problems with it?
Click to expand...
Click to collapse
1) The best stock ROM would either be, well, the stock ROM, or the Revolution ROM.
2) I've had some strange behavior with Relay for Reddit and frequent crashes of WhatsApp when sending messages. Right now I'm on Lineage OS 14.1 and it's really great. Camera's a bit slow, but otherwise I love it. I missed stock Android.

HeavyHDx said:
1) The best stock ROM would either be, well, the stock ROM, or the Revolution ROM.
Click to expand...
Click to collapse
Isn't Nougat still a beta...? I'm looking for a stable stock version of EMUI...
HeavyHDx said:
2) I've had some strange behavior with Relay for Reddit and frequent crashes of WhatsApp when sending messages. Right now I'm on Lineage OS 14.1 and it's really great. Camera's a bit slow, but otherwise I love it. I missed stock Android.
Click to expand...
Click to collapse
Thank you, tomorrow I'll test if Whatsapp working fine or not, that's important for me. Is Lineage 14.1 the most stable Lineage version?

Nougat is still in beta, yes. The full version is expected to come out within the next few weeks.
14.1 refers to the Android version which is 7.1.1. They adopted CyanogenMod's naming scheme. You'll still need to update LineageOS to get bugfixes and such. The dev releases a new update every 2 or 3 days, just check their website periodically.

Deddline said:
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Click to expand...
Click to collapse
Installed Android System Web Viev .apk did the trick for me, too. muchos gracias.

What ROM can I install on my NEO?

Hello,
do you know if I can install the following ROM downloaded from this site (CM13):
http://www.cyanogenmods.org/forums/...od-13-marshmallow-rom-gt-i9300i-i9301i-i9301q
Otherwise do I have to install only ROMs that came from cyanogenmod.org (CM 12.1)?
https://webcache.googleusercontent.....org/?device=s3ve3g+&cd=1&hl=it&ct=clnk&gl=it
(I used a cached link because at the moment the site is offline)
Thank you.

tramsss said:
Hello,
do you know if I can install the following ROM downloaded from this site (CM13):
http://www.cyanogenmods.org/forums/...od-13-marshmallow-rom-gt-i9300i-i9301i-i9301q
Otherwise do I have to install only ROMs that came from cyanogenmod.org (CM 12.1)?
https://webcache.googleusercontent.....org/?device=s3ve3g+&cd=1&hl=it&ct=clnk&gl=it
(I used a cached link because at the moment the site is offline)
Thank you.
Click to expand...
Click to collapse
CM 12.1 Official
Download: https://dl.dropboxusercontent.com/u/17361181/cm-12.1-20161031-NIGHTLY-s3ve3g.zip
CM13 is not stable to normal use.

Mr.gRisáK said:
CM 12.1 Official
Download: https://dl.dropboxusercontent.com/u/17361181/cm-12.1-20161031-NIGHTLY-s3ve3g.zip
CM13 is not stable to normal use.
Click to expand...
Click to collapse
Thank you for your reply. I tried several ways to flash Cyanogen to my (non rooted) phone but none worked!
I first followed this guide and I tried to flash it using Android recovery, but I get the following error:
E:footer is wrong
E:signature verification failed
Then I tried to follow this guide, both from Windows 7 and Linux, but the terminal hangs on <waiting for device> message when i run fastboot command, from both operating systems. Here I tried to install several drivers (Samsung, Google and so on...) and even tried to follow all the possible ways, including linux settings, to get rid of that error: none worked.
Finally, I tried this guide and I flashed several files: latest TWRP version, some old TWRP versions and even CWM recovery. None worked. The flash is done with no errors, but when I try to go in Recovery Mode I always get the Android recovery.
What the hell is wrong with my phone?
Thank you!

tramsss said:
Thank you for your reply. I tried several ways to flash Cyanogen to my (non rooted) phone but none worked!
I first followed this guide and I tried to flash it using Android recovery, but I get the following error:
E:footer is wrong
E:signature verification failed
Then I tried to follow this guide, both from Windows 7 and Linux, but the terminal hangs on <waiting for device> message when i run fastboot command, from both operating systems. Here I tried to install several drivers (Samsung, Google and so on...) and even tried to follow all the possible ways, including linux settings, to get rid of that error: none worked.
Finally, I tried this guide and I flashed several files: latest TWRP version, some old TWRP versions and even CWM recovery. None worked. The flash is done with no errors, but when I try to go in Recovery Mode I always get the Android recovery.
What the hell is wrong with my phone?
Thank you!
Click to expand...
Click to collapse
What version of S3 Neo do you have ?
I9300I , I9301I ??
Maybe try install original samsung rom with odin and then install again TWRP with odin.

My phone is I9301I.
If i follow your hint, can I flash the latest version among these?
Do you have any other suggestion for flashing the whole ROM with Odin?
(it would be my first time...)
Thank you in advance for your support!

tramsss said:
My phone is I9301I.
If i follow your hint, can I flash the latest version among these?
Do you have any other suggestion for flashing the whole ROM with Odin?
(it would be my first time...)
Thank you in advance for your support!
Click to expand...
Click to collapse
For first time You must register on sammobile (official samsung site).
And try download original ROM from: https://www.sammobile.com/firmwares/database/GT-I9301I/ (official site) and just select your country.
http://odindownload.com/download/Odin3_v3.12.3.zip <--- odin
https://www.youtube.com/watch?v=UBU4MFYiu_I <---- Instruction how to use odin
If everything going to be okey try again install cm12.1
TWRP with odin ---> https://forum.xda-developers.com/showpost.php?p=56085899&postcount=2 2nd Method !
1. Download the ROM = https://dl.dropboxusercontent.com/u/17361181/cm-12.1-20161031-NIGHTLY-s3ve3g.zip
2. Download GAPPS = http://opengapps.org/ my best opinion is ARM 5.1 PICO
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Home + Power )
5. Wipe data / Factory Reset
6. Install CM zip and GApps zip
7. Reboot to system
Enjoy! :fingers-crossed:

I'm downloading the file I9301IXCUAPH1_I9301IITVAOL1_ITV.zip from your link (I have registered an account).
Meanwhile, please tell me: isn't the link I posted before safe?

Mr.gRisáK said:
For first time You must register on sammobile (official samsung site).
And try dowonload from: https://www.sammobile.com/firmwares/database/GT-I9301I/ official site just select your country.
http://odindownload.com/download/Odin3_v3.12.3.zip <--- odin
https://www.youtube.com/watch?v=UBU4MFYiu_I <---- Instruction how to use odin
If everything going to be okey try again install cm12.1
TWRP with odin ---> https://forum.xda-developers.com/showpost.php?p=56085899&postcount=2 2nd Method !
1. Download the ROM = https://dl.dropboxusercontent.com/u/...TLY-s3ve3g.zip
2. Download GAPPS = http://opengapps.org/ my best opinion is ARM 5.1 PICO
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Home + Power )
5. Wipe data / Factory Reset
6. Install CM zip and GApps zip
7. Reboot to system
Enjoy! :fingers-crossed:
Click to expand...
Click to collapse
All went fine! Thank you sooo much!
PS: CM12.1 has wrong link.

tramsss said:
All went fine! Thank you sooo much!
PS: CM12.1 has wrong link.
Click to expand...
Click to collapse
Sorry my fault! :crying:
Now works :highfive:
You are welcome ! :fingers-crossed:

How to update baseband without losing your data or locking bootloader

Hello everybody...
This post was created with the intention of helping those people who want to upgrade their baseband version of ZUK Z2+. There are some methods to do this, some of them could erase all your information (qfil) and some others could block bootloader (.zip).
The presented method in this post will not erase either your data or block your bootloader.
Note: when I say "data" I'm referring to images, downloads, videos, etc. This method won't erase any data located on root/sdcard.
Here are the steps for upgrading baseband:
1: Download this ROM and transfer it to you cellphone. (NOTE: It's highly recommended to download it from your PC. I downloaded it through my phone and at the time of flahing, it gave me an error; It said it was a corrupt file. So, download it through your PC.)
2: Go to TWRP and wipe system, data, cache and dalvik cache.
3: Flash the ROM and be patient.
As the aim of this post is upgrading the baseband, some of you might wonder "Is it necessary to boot up so that baseband could be updated?", I don't actually know it. When I installed this ROM at first I wasn't after a baseband upgrade, rather taste it to see how it was (btw, it's the best nougat ROM so far; my humble opinion). So, we could say that you can try not to wait till it boot up, and install your whished ROM right after the first flashed ROM. But I highly recommend you to taste this ROM.
IMPORTANT DATA: this ROM will update baseband to 1.70 version.
There is a more recent version than the one used on the steps above (I do not know whether this version is capable of upgrading baseband or not. I tried to root that version with Magisk 15.3 but unable to). Here is the ROM.
If you decided to taste this ROM you should know that the only available languages are Chinese and English, and flashing gapps' zip won't work. In order for you all to solve gapps problem do the following:
1: Download Google Installer 2.0
2: Install, open and download all fundamental data from Google Installer
3: For contacs app to work properly do the fallowing: go to settings/apps/Google Contact Sync/Permissions, grant all permissions and restart your phone.
This ROM includes some chinese apps, but those can be disabled very easily if you go to apps' window.
LongTap does not work on this ROM.
Thanks to @Not_James_Bond for providing me the GoogleDrive's link of the ROM, since the official website is weibo and it's a little bit tedious download things from there.

Reserved :v

How to enable swipe up open dockon this ROM like Oreo some days ago I did but now i cant find that option but when I installed other ROM I forgot how to do that
can u please help me ??

dawoodrangrez said:
How to enable swipe up open dockon this ROM like Oreo some days ago I did but now i cant find that option but when I installed other ROM I forgot how to do that
can u please help me ??
Click to expand...
Click to collapse
You just have to update OnePlus Launcher...

MaikelAt said:
Reserved :v
Click to expand...
Click to collapse
Please make a video showing the features, home screens, VoLte, camera etc and post it on youtube that will be greatly appreciated.
Thanks

rakeshsainixyz said:
Please make a video showing the features, home screens, VoLte, camera etc and post it on youtube that will be greatly appreciated.
Thanks
Click to expand...
Click to collapse
On YouTube there are some reviews... Like this one or others

Is there a similar rom for indian variant which updates baseband to 1.76???

MaikelAt said:
Here are the steps for upgrading baseband:
1: Download this ROM and transfer it to you cellphone. (NOTE: It's highly recommended to download it from your PC. I downloaded it through my phone and at the time of flahing, it gave me an error; It said it was a corrupt file. So, download it through your PC.)
2: Go to TWRP and wipe system, data, cache and dalvik cache.
3: Flash the ROM and be patient.
...
IMPORTANT DATA: this ROM will update baseband to 1.70 version.
...
Click to expand...
Click to collapse
OMG...
Do you seriously think that to change the baseband you need to flash a new ROM ???
It is necessary to follow closely the answers to your questions. Everything is much simpler.
https://forum.xda-developers.com/showpost.php?p=75337122&postcount=881

Nordicus said:
OMG...
Do you seriously think that to change the baseband you need to flash a new ROM ???
It is necessary to follow closely the answers to your questions. Everything is much simpler.
https://forum.xda-developers.com/showpost.php?p=75337122&postcount=881
Click to expand...
Click to collapse
Maybe you got him all wrong. It's the safest way bcz on Zukfans thread some zips lock bootloader so we have to flash unlock img right after baseband flashing. If anyone boots without flashing img he/she may lose his internal storage . So it's imp to flash unlock img before booting up the device right after updating baseband.

abhi8192 said:
Is there a similar rom for indian variant which updates baseband to 1.76???
Click to expand...
Click to collapse
I don't actually know... I'll try to find it out and let you know...

check if bootlaoder is unlocked

Hello please help me I'm using smg note 3 n9006 ( China /wcdma ) I want to install a costum rom (magma nx ) because my os 5.0 is outdated but I don't know phone's bootlaoder statu I can't flash twrp if I don't know . Can someone help me to know if my boolaoder is locked or unlocked ? if it is locked can I have a method to unlock it?. I precise that the phone came whit pre rooted stock rom I dont know if this information can help to know bootaoder statu . Thank

Its only you that says bootloader is locked .
Its not .
https://forum.xda-developers.com/showthread.php?t=2574886

JJEgan said:
Its only you that says bootloader is locked .
Its not .
https://forum.xda-developers.com/showthread.php?t=2574886
Click to expand...
Click to collapse
Bro I verified your link but I don't seen nothing about bootlaoder this link talk about how to check if note 3 is fake or clone.

simpatiseur said:
Bro I verified your link but I don't seen nothing about bootlaoder this link talk about how to check if note 3 is fake or clone.
Click to expand...
Click to collapse
REPEAT why are you saying a N9006 has a locked bootloader ???
Post clearly states the models with locked boot loader .
After 46 posts and no further forward dont you think its time you gave up .
As your only going to end up with a brick .

JJEgan said:
REPEAT why are you saying a N9006 has a locked bootloader ???
Post clearly states the models with locked boot loader .
After 46 posts and no further forward dont you think its time you gave up .
As your only going to end up with a brick .
Click to expand...
Click to collapse
I know that I'm a newbie in costum rom's world and #Eleo told me that I had to learn before flashing anything so I followed his advice since many days I'm searching on YouTube Google and I learned many things. In my searches I discovered that bootlaoder must be unlocked before flashing twrp but I don't know if my phone's bootlaoder is lock or unlock that's why I asked this question

Repeat its not locked .

JJEgan said:
Repeat its not locked .
Click to expand...
Click to collapse
I'm happy to learn it please #Eleo told me I can try to flash n9005'twrp on my n9006 with Odin so I want to know what's USB drivers I must to use USB drivers for n9005 or n9006 .thank

You have already asked this question and been given the answer .
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows

Install driver, Install Odin .
Download your rom and copy to ext sd card .
Download correct TWRP to PC .
Open Odin .
AP select the TWRP tar .
Boot phone to download mode .
Connect cable .
Flash TWRP .
Reboot .
Close Odin .
Boot to recovery mode .
Install zip locate your rom zip .
Start then follow Aroma and rom instructions as posted .

JJEgan said:
Install driver, Install Odin .
Download your rom and copy to ext sd card .
Download correct TWRP to PC .
Open Odin .
AP select the TWRP tar .
Boot phone to download mode .
Connect cable .
Flash TWRP .
Reboot .
Close Odin .
Boot to recovery mode .
Install zip locate your rom zip .
Start then follow Aroma and rom instructions as posted .
Click to expand...
Click to collapse
Bro I don't like aroma so can I flash rom with twrp? And without aroma?

Its an Aroma build rom not able to install without Aroma flashed via TWRP.
This I don't like Aroma suggests you will find no current TW based roms.
You have been posting about this rom and now decide you dont want it after 50 + posts ??
What a waste of everybody's efforts .
ASOP or stick to stock .

JJEgan said:
Its an Aroma build rom not able to install without Aroma flashed via TWRP.
This I don't like Aroma suggests you will find no current TW based roms.
You have been posting about this rom and now decide you dont want it after 50 + posts ??
What a waste of everybody's efforts .
ASOP or stick to stock .
Click to expand...
Click to collapse
excuse me I think that I don't understand aroma's function I will do several searches about it

Aroma is a tool for devs to give users multiple choices during rom install.
Boot to TWRP. Install zip Aroma starts the install .User takes choice or default option.

JJEgan said:
Aroma is a tool for devs to give users multiple choices during rom install.
Boot to TWRP. Install zip Aroma starts the install .User takes choice or default option.
Click to expand...
Click to collapse
I have downloaded video on YouTube to learn about aroma installer
Please link to download aroma installer

simpatiseur said:
I have downloaded video on YouTube to learn about aroma installer
Please link to download aroma installer
Click to expand...
Click to collapse
Why wont you listen ??
The developer of a rom has used Aroma to create the install package its part of the rom zip .Its not separate at all .
Boot to recovery TWRP choose install zip .
Locate MM rom zip on ext sd card swipe to start install .
Aroma opens and installs rom .
You only require Aroma yourself if you are building a rom .

JJEgan said:
Why wont you listen ??
The developer of a rom has used Aroma to create the install package its part of the rom zip .Its not separate at all .
Boot to recovery TWRP choose install zip .
Locate MM rom zip on ext sd card swipe to start install .
Aroma opens and installs rom .
You only require Aroma yourself if you are building a rom .
Click to expand...
Click to collapse
Thank bro