Database Users

Rooted, Custom Rom a huge fail

Hello dear Community!
It is depressing that my first appearance here is to ask for help, but I am going crazy.
So, I tried to Root my phone via Odin + CF Autoroot klte and it seemed to have been a success.
The root checker also said, that my device was rooted so I went on and installed TWRP to be able to install Lineage OS.
After getting Lineage to work I got a few error messages suddenly popping up, telling me that either "Music had stopped" or other android operation were closed because they didn't work properly.
I tried to install Gapps, it seemed to have worked but I was only able to open and enter the store once, afterwards the store never managed to load and then the app closed itself after starting it.
So I checked again with Root Checker, but this time it gave me an error message, too. It said, that my device was not rooted properly.
I guess this is were I made it worse by deciding to just root the phone again. Obviously, it didn't work either.
Afterwards I thought that maybe installing The Original Android OS and then unrooting the phone would be the best solution to be able to start anew.
First I tried to flah Lineage again and that made it impossible for me to boot the phone. The farthest I got was the setup page, were it tells you Hello and were you can choose a Language, but clicking the arrow key didn't do anything at all.
The recovery mode was also not the TWRP one anymore, but the original Android one and that was a huge problem for me.
Then I tried to flash the 6.1 OS for the S5 (I made sure it was the correct version), but now it is stuck at the "Samsung" screen while it boots.
It never boots though.
I don't know what to do anymore.
Please, I beg you, could anyone help me out?

Don't flash the latest Lineage OS ROM
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke

mattybourke1994 said:
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke
Click to expand...
Click to collapse
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.

Kinloch said:
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.
Click to expand...
Click to collapse
Thank you so much for your fast reply!
-> I flashed the newest Version for klte via Odin, but I can't get into the boot mode.
I only am able to enter the download mode. What can I do now?

Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.

Kinloch said:
Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.
Click to expand...
Click to collapse
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.

AsylumAlice said:
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.
Click to expand...
Click to collapse
just flash supersu in twrp

AronFerr said:
just flash supersu in twrp
Click to expand...
Click to collapse
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.

AsylumAlice said:
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.
Click to expand...
Click to collapse
yes just flash it but no wipes

TWRP for P580 running Oreo?

Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!

I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!

Worked !!!
Thank you dear. Its worked for mine in p585 oreo android....
Anyone can search mcmilk 7zip in google and download program to extract boot.img.lz4 and get boot.img :good:

use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:

Latest twrp dose not worked on my device but this solution work fine

I can confirm that this method does work. I used it on my SM-P580 yesterday. I would suggest that you first backup your all of your apps, contacts, photos, etc using SmartSwitch. You will need to restore everything after the tablet tells you that it needs to be reset because it wipes everything. After the restore, you will need to enter all of your accounts and passwords again but at least all of the data will be back.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse

Im not sure if this post belongs here, you link to the T580 TWRP, not the P580.
Is that one compatible with P580?
nill3bor said:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Click to expand...
Click to collapse

If I do this, will I be able to mount my SD Card as internal storage? 16gb just isnt enough on this tablet.

Do you have to be on oreo already for this to work I'm still on 7.0 and with my system modified I can't upgrade normally

This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????

khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
This one worked for me on a P585Y. You just have to skip the steps below.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
Click to expand...
Click to collapse
It will also show on the Device Maintenance, just ignore the warning.
You can freeze some of the system apps to prevent it from showing on the notification again.

amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!

Hello Gyus,
I managed to root the device with the method posted by @amosdinh (Thank you so much). Now I'm trying to configure adoptable storage. So far I didn't achieve this goal. ADB commands doesn't work and I can't install the ASPlugin.zip needed by Root Essentials to set adoptable storage by the app.
TWRP for P585 is corrupted, gives blue/red lines screen. The dev that maintains the code is absent since march. I'm out of luck on this. If anyone have a idea to get adoptable storage on this device while using Oreo, please comment.
Thanks!
---------- Post added at 11:17 AM ---------- Previous post was at 11:11 AM ----------
artaeun said:
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Click to expand...
Click to collapse
Just renaming magisk_patched.img to boot.img and adding to .tar file by 7zip worked for me.

We should ask a dev to update twrp for android 8.1

khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
Same freeze for me with the Omni - can't do anything outside of access download mode

Same Problem
cmzizi said:
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
Click to expand...
Click to collapse
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.

luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
Really wish this wasn't the case. I'd actually keep this thing if it had a working TWRP.

On my SM-P580 I used Odin and TWRP I don't get the black screen but when I reboot to get into TWRP recovery mode it shows the padlock and says swipe to unlock. Tried many times bit cannot swipe and cannot get past this. All I want is to be able to use the SD card as internal storage. HELP???? Thanks!!

luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
thanks in advanced
where can i find stock firmware?

I've just installed magisk using TWRP via command line. P580
I've just installed magisk using TWRP via command line.
Read the entire post before trying this yourself.
I installed the latest TWRP, the one that bugs and doesn't display anything, this allows to root without wiping data. I'm running the latest korean firmware for P580.
Just do this:
1. Launch TWRP and INMEDIATELY LOCK YOUR SCREEN. (I got ghost stripes that disappeared after 2 days when testing this, work with low light so you can notice your screen whenever it tuens on) Please don't forget this point, don't [temporarily] damage your screen as I did.
2. adb push Magisk-v[Current version].zip external_sd
3. adb shell
4. twrp install external_sd/Magisk-v[Current version].zip
After this you just need to install MagiskManager-v[Current version].apk and you will be all done.
But there is one thing...
If you ever get into recovery mode, there is no way out without using adb as far as I know. You can launch download mode and cancel it but you'll boot back to TWRP.
When in twrp touching your screen or any button will wake the device up and will start burning the ghost image to your screen.
So if you know of a method for rebooting to system without using adb, please let me know.
Also a solution for this would be to flash back the stock recovery, wich may or may not force to wipe system, that something that needs to be tested tho.
Update: Ok so, you can use a handy tool called MTKroot on recovery.img.lz4 to get recovery.img, then use 7z to pack it into a tar file and flash that tar file with odin (AP, same as TWRP)
This way you will not have a 0.001% chance of random boot into recovery mode and damage your screen

[Recovery][MI 8 SE] TWRP Recovery Installer

Hi guys,
Easy way to flash TWRP from computer for Mi 8 SE.
Download suitable file from below.
Twrp 3.2.3-1227 Compatible with Android 9 (Beta v8.12.27 and upper versions)
https://www.mediafire.com/file/qtdm3qlivcn4gmw/MI8_SE_TWRP_Yukleme_Araci_81227.zip/file
Twrp 3.2.3-1102 Compatible with Android 8.1 (Lower versions than Beta v8.12.27)
https://www.mediafire.com/file/bsvuaxcg1vghayz/MI8SE_TWRP_Yukleme_Araci.zip/file
1. Your phone bootloader should be unlocked.
2. Make sure USB drivers are installed to PC.
3. Turn on USB Debugging. Settings - More - Developer Options - Usb debugging
4. Press Volume down + power button and reboot to fastboot mode.
5. Connect your USB cable to PC
6. Unzip downloaded package and run twrp-yukleme.bat file.
7. Press enter to continue. When it's done enter to exit program.
8-For steady TWRP install Magisk16.4 when you boot into TWRP.
Thanks to by.Trabzonlu from miuiturkiye

downloaded multiple times
unpacking gives a bug
I tried both links

olinen said:
downloaded multiple times
unpacking gives a bug
I tried both links
Click to expand...
Click to collapse
Thanks for your report.
Links and zips are updated. It should unzip fine now :good:

it's ok, just that I had to run the program first and only after that I joined the mobile in the fastboot. Otherwise, he made a mistake
Thx :good:

9
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me

Alimataei said:
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me
Click to expand...
Click to collapse
TWRP 3.2.3 12-17 works for android 9 ?

TacoNikky said:
TWRP 3.2.3 12-17 works for android 9 ?
Click to expand...
Click to collapse
1102 also works for Pie.

I try to install this recovery but nothing happens at all I have installed the rom miui.eu 10.2.2.0 apparently this rom mr deleted the recovery that had already installed before installing this rom:crying:

Have someone trying treble gsi rom? How to proper install? Thanks in advance.

TWRP-3.3.0-0423 whit magisk 19.0 root For Xiaomi mi8 SE
Download Link:
https://mega.nz/#!CrhTmKgY!PE7lXdLtCzPqYO55ulCx2faFLVqPi6mpXXaYOnbbB8s

Could it be possible that this TWRP will work on mi 9 se, too?
Sent from my [device_name] using XDA-Developers Legacy app

putti71 said:
Could it be possible that this TWRP will work on mi 9 se, too?
Click to expand...
Click to collapse
This is mi8se forum!! TWRP is specific for each phone (different kernel, processor...) so there's no way you could install this TWRP img on another phone than Sirius

Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?

Hi! Is there an updated twrp for miui 11 android 10. First time to install this.

greendra8 said:
Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?
Click to expand...
Click to collapse
Same as mine. How's your device now?
---------- Post added at 08:16 AM ---------- Previous post was at 08:13 AM ----------
Hi guys. Im getting the error after flashing twrp. At first it works. I will flash rom so i reset it and wipe al data. But it didn't boot into recovery mode. It stays at fastboot. I just dl this installer from somewhere here in xda so i didint know thatmagisk should be flashed afterward. Pls help. I . getting error authentication failed

Trojan00 said:
Same as mine. How's your device now?
Click to expand...
Click to collapse
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.

greendra8 said:
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.
Click to expand...
Click to collapse
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?

Trojan00 said:
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?
Click to expand...
Click to collapse
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.

greendra8 said:
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.
Click to expand...
Click to collapse
Bro i downloaded the stock fastboot firmware. But in mi flash it says can not found file flash_all.bat

[SOLVED] Phone gets stuck in bootloop if I try to install Magisk ZIP!

From the forum I followed these step to install magisk:
- Patched my boot.img of my current rom using Magisk Manager and flashed via fastboot
- After rebooting from fastboot it got stuck in recovery so had to wipe all data and it booted finally
- After booting up installed Magisk Manager and both Magisk and Magisk manager shows green tick (installed)
But at this stage, whenever I open Magisk, it shows a recommendation to install a ZIP, if I agree to install it, phone gets stuck in recovery again.
If I choose not to install recommended zip and click Install > Direct Install, phone gets stuck in recovery again anyway
Everytime it gets stuck I have to wipe all data and start all over again. Anyone else facing same issue? Any solution?
Really frustrated right now.
My current rom is : DAVINCIIN INDIAN Global_V11.0.2.0
Used latest magisk manager 7.4.0
I have official recovery, not TWRP.
Afraid that flashing TWRP now will brick it for good.
UPDATE: Got the solution here, thanks @pikchu289 !

Twrp up to now is the best way
But check some stuff first
1.unlock the boot loader
2.chech if the magisk zip/img is corrupted or any file
3.does your os support this magisk version
Any way you can flash twrp because many people had already tried it and tested it from installing zips/ROMs/mods etc.. to backup files/data or even fixing some corrupted files that caused boot loops manually
But there are various things that doesn't work usually such as restoring system partition but never worry about this because if any thing failed just use miflash tool to go back to official/stock rom
Edit : I think something's wrong with your magisk version number

I have no idea which rom youre using or why on earth you didn't install TWRP before messing around with the os but some roms dont work with latest magisk and you have to use a specific older version depends on your rom, and you can't update magisk at any point as long as youre on this version of the rom. Ive always used custom recovery and when facing an issue with magisk you just boot to recovery and flash the 'magisk uninstaller' zip (available on magisk xda page) and reboot and you get system. No need to start from scratch

Solve this solution
Dear stone_henge!
I found a method to solve this solution after a lot of days I tried a lot of times! As follows:
1. I back up my Internal storage to my PC
2. Format Data (In TWRP: Wipe -> Format Data)
3. I reboot back into recovery
4. I connected my device to PC via a cable and copy two files: "Magisk-v20.1.zip" and "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" into Internal storage. Then rename "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" to "Disable_ForceEncrypt.zip"
4. I flash "Magisk-v20.1.zip", then I reboot back into recovery again.
5. I flash "Disable_ForceEncrypt.zip" . Reboot to system and setting my phone like after flash a new room, and then I installed "MagiskManager-v7.4.0.apk"
It's working for me!
You can download "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" here: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389

pikchu289 said:
Dear stone_henge!
I found a method to solve this solution after a lot of days I tried a lot of times! As follows:
1. I back up my Internal storage to my PC
2. Format Data (In TWRP: Wipe -> Format Data)
3. I reboot back into recovery
4. I connected my device to PC via a cable and copy two files: "Magisk-v20.1.zip" and "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" into Internal storage. Then rename "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" to "Disable_ForceEncrypt.zip"
4. I flash "Magisk-v20.1.zip", then I reboot back into recovery again.
5. I flash "Disable_ForceEncrypt.zip" . Reboot to system and setting my phone like after flash a new room, and then I installed "MagiskManager-v7.4.0.apk"
It's working for me!
You can download "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" here: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Click to expand...
Click to collapse
Finally someone with an answer!
Thanks... Will try and see if it works...
UPDATE: IT WORKED!

Aserar said:
I have no idea which rom youre using
Click to expand...
Click to collapse
Maybe I should've used font size 72 while writing the rom I'm using above.
Aserar said:
why on earth you didn't install TWRP before messing around with the os
Click to expand...
Click to collapse
Yeah some people prefer to have stock recovery and not mess with the phone that much... But while you seem to be an expert on what to do, maybe you could try be helpful a bit and provide with the guide of flashing TWRP on k20? Yeah i can obviously see there are guides already in the forum but I'm curious to know which one you followed.
Aserar said:
some roms dont work with latest magisk and you have to use a specific older version depends on your rom, and you can't update magisk at any point as long as youre on this version of the rom. Ive always used custom recovery and when facing an issue with magisk you just boot to recovery and flash the 'magisk uninstaller' zip (available on magisk xda page) and reboot and you get system. No need to start from scratch
Click to expand...
Click to collapse
None of these lines actually answer my problem or even help in any way. But thanks for enlightening me. -_-

It's true I did miss the part where you mentioned your rom but let's recap..
I did tell you you should install custom recovery.
I did tell you you should probably stick with the magisk version that works and not to update.
I did tell you you don't need to start over every time you get a problem caused by magisk and you can just flash magisk uninstaller and get your system back.
You don't see any of that helpful??? That's fine bc I got news for you.. THIS FORUM IS FREE! Do I have to research your problem for you and give you a step by step guide or else you whine about it?? Plus this is a public forum. People share the knowledge they have with everyone who reads it now and in the future and might get a piece of information out of it.
If you use the time you waste attacking people who used their time to try and help you (instead of saying thanks anyway like the rest of us do) into doing your research (like the rest of us do too) you'll probably be fine.
stone_henge said:
Maybe I should've used font size 72 while writing the rom I'm using above.
Yeah some people prefer to have stock recovery and not mess with the phone that much... But while you seem to be an expert on what to do, maybe you could try be helpful a bit and provide with the guide of flashing TWRP on k20? Yeah i can obviously see there are guides already in the forum but I'm curious to know which one you followed.
None of these lines actually answer my problem or even help in any way. But thanks for enlightening me. -_-
Click to expand...
Click to collapse

Aserar said:
It's true I did miss the part where you mentioned your rom but let's recap..
I did tell you you should install custom recovery.
I did tell you you should probably stick with the magisk version that works and not to update.
I did tell you you don't need to start over every time you get a problem caused by magisk and you can just flash magisk uninstaller and get your system back.
You don't see any of that helpful??? That's fine bc I got news for you.. THIS FORUM IS FREE! Do I have to research your problem for you and give you a step by step guide or else you whine about it?? Plus this is a public forum. People share the knowledge they have with everyone who reads it now and in the future and might get a piece of information out of it.
If you use the time you waste attacking people who used their time to try and help you (instead of saying thanks anyway like the rest of us do) into doing your research (like the rest of us do too) you'll probably be fine.
Click to expand...
Click to collapse
Sorry for being harsh... I understand you actually tried to help. It's actually really frustrating when facing a problem that has no straightforward solution.
Sorry mate.

finally i founded how to fix this issue without formating data of ur device
--just the flash the same the full custom rom or stock rom that u r using currently on . and boom restart. and ur issue fixed

Install a magisk zip without TWRP. TWRP takes too long. Instead use Aodin to flash a rom specific to your device version. Make sure it is not corrupted as well

TWRP, Rooting and Custom Rom HELP SM-T510 Tablet Tab A 10.1

Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)

You don’t unzip the .tar files. Keep them as is.

secretwolf98 said:
You don’t unzip the .tar files. Keep them as is.
Click to expand...
Click to collapse
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5

My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.

fountainb234 said:
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5
Click to expand...
Click to collapse
Just rename the file cutting off the .md5.

is it possible to downgrade from sk5 to sk1? you cannot upgrade to a later version, and I know downgrading can have reverse effects on the tablet. I have same tablet I would like to know. if I flash sk1 is there a way to fix it if it bricks?
Magendanz said:
My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.
Click to expand...
Click to collapse

fountainb234 said:
Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)
Click to expand...
Click to collapse
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!

framC0 said:
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.

lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?

framC0 said:
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?
Click to expand...
Click to collapse
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.

lewmur said:
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.
Click to expand...
Click to collapse
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
EDIT: i dont have OEM unlock option in DEV but its unlocked, i checked when in downloaded mode it says "lock device and..." so its unlocked.

framC0 said:
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
Click to expand...
Click to collapse
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.

lewmur said:
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.
Click to expand...
Click to collapse
YES!!!!!! YOU ARE THE BEST!!!! Done! It booted directly to TWRP!!! THANK YOU!!!! So now will flash Magisk with twrp right? Alawys rooted my devices but this 510 wow...never saw a thing like this
Edit: The fight continues - So i did wipe and format data in TWRP and reboot system and im IN. Installed Magisk 23.0.apk and noticed that im still with "RAMDISK: no"... Searching how to do next to root! Im very near of the goal!!!! Finally! Big thanks to lewmur!

lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file.
Click to expand...
Click to collapse
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
EDIT: Since an older version dont know witch, Magisk Manager and Magisk are joined in apk so i just flashed Magisk 23.0.apk in TWRP...rooted!!! DONE!!!! FINALLY

framC0 said:
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
Click to expand...
Click to collapse
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.

lewmur said:
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.
Click to expand...
Click to collapse
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!

framC0 said:
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!
Click to expand...
Click to collapse
USB cables are notorious for being flaky. Sometimes it helps to just turn the cable over and plug it back in. I always keep several on hand so that if I have connection problems I can try another cable.