Hey Guys,
I bought a HTC HD2 today. It got Android on it but it bugged a lot. So i looked up a method to get
back the normal Windows Mobile. I found something in the internet.
It told me there to formate the SD-card FAT32 and then load a rom from HTC.com.
Then rename RUU_signed.nbh to LEOIMG.nbh. Then copy the LEOIMG to the formated SD Card.
So everything worked fine. I started the HTC with Vol- + Power button and it tried to install. But then
it failed to install and now nothing works anymore.
I dont even see the memory in windows when i connect the htc to my computer. I just cant do anything and
cant install ActiveSync or smth too.
Would be nice if you know what to do.
check out the links below, they might help
Related
Hi!
I flashed my O2 XDA // Wallaby 5.15
to WM2003SE.
The first Boot worked, after that, I wanted to switch the language to german, I had to reboot, and from there on, my problems began....
i read about the possibility to re-flash my os with an sd card.
everytime i plugin that card to my notebook, winxp says, i have to format that card.
after that, i tried to copy the nk.nb1 file to this card, with success...
and then, i plugged in that card back to my xda.... nothing happens...
if i press the "contactlist" button ( in bootloader ), i come to some backup modes, but not to read an new os-image from sd card.....
i'm getting crazy :/
can someone help me plz ???
You have to use xdatools to copy the Image to the sd-Card. It is written in a special format. Copying with the explorer is useless for flashing...
HTH
Stefan
i tried this some times....
but do i have to save "NK.nb1" to sd-card (( h:\nk.nb1 )) or in another format ?? for example sd-card image ( *.img ) or *.nbf .... etc
my last try for this evening....
must go to work in some minutes.. ;(
damn night-shift ^^ ( but good thing: nothing to do... just sit there and wait )
Download http://lumpistefan.dyndns.org/tools/XDATools.zip unzip it and run osimagetool.
Select the nb1 or nbf file in source and select your card reader with inserted SD-Card as Destination. Press Copy and wait until process has finished.
Insert the card into your xda. If there comes a message to format the card press no or do directly a softreset wirh power button to enter bootloader. Than the image should be recognized ....
HTH
Stefan
doesn't work....
what have i done ? *omg*
if i want to write an image to my sd card, my winxp wants me to format it....
if i do this, the writing works fine, but my xda doesnt recognize the new nb1....
i get no connection to my pc with the cradle ( but there is something being found in windows while my xda is in bootloader mode.... )
hi.
i've read something about problems with winXP, if you want to write a new os to sd card... is that true?
btw. it's still not working....
my pc - sd - card - reader/writer cannot write the file in that way my xda could read it as an new os......
holy ****
i solved the problem i think
the xda os image tool doesnt work with notebook internal sd-card-reader/writer.... or winxp is the problem....
now with win2k3 server it works..... *omg* i'm so happy
thx!!!!!!!!!!!!!!!!!!!!!!!
oppaunke said:
the xda os image tool doesnt work with notebook internal sd-card-reader/writer
Click to expand...
Click to collapse
I think that is the problem heard a few times, that the internal card reader made some trouble.
Glad to hear, that your device is working again....
Stefan
Hi to all,
i tried to connect on seus to check new rom, but it doesn't recognize my X1. On the phone keep saying loading...No image file.
Win xp sp2, active sync 4.5
Any advice?
I try hard split, custom rom, nothing,reinstal active sync.... Always the same loading no image file...
when i do hard split it connect, do everything, reboot but same thin, nothing happens...
And i m not on Vista...
Nobody cant help?
Please,help?
I have this problem as well, and it's inconsistent, one moment it could detect the right product (which ends up with the latest ROM) the next moment I check it couldn't recognise.
I ended up using sd card to flash.
i try with sd card to, but no luck...thanks
Try reformatting your SD card... Happened the same to me at one point.
Reformatted the SD card, put the image on it...and it worked like a charm
yup, make sure you format ur sd card as fat32 not fat. i had the same problem but after formatting it as fat32 everything went smoothly.
I have the same problem since yesterday, here's hoping they are putting up the UK version of R3AA
Thanks to all, i try with formatted sd card with fat32, but same story again, no image file... what rom did you put with sd card? i tried X1_STOCK_SPL_072 and APP-SW_X1_GENERIC_UK_1213-6450_R3AA010__Kovisimg.nbh, nothing...
The ROM file name has to be kovsimg.nbh
Did u have it like that? If you didn't you probably formatted your SD card for nothing
yes, i rename it, like it was in directions explained..
i made it, thanks to all!!!
i have the same problem: tried to update from SE site but failed the update. now, all i have is colored-striped screen and my pc can't detect my xperia at all (both in vista and xp).
so, what did you do?
thanks.
henrymd said:
i have the same problem: tried to update from SE site but failed the update. now, all i have is colored-striped screen and my pc can't detect my xperia at all (both in vista and xp).
so, what did you do?
thanks.
Click to expand...
Click to collapse
Try to flash your phone with stock rom using SDcard method
Hello everybody,
2 days ago i flashed the dutty r5 NOR by accident, should have been NLD.
I cannot understand NOR whatsoever so i tried to re-flash my phone with the NLD version, but when i go into bootloader mode it cant find the image file. Im sitting at 90% battery charge.
What i do:
1) USB connection between phone and pc.
2) Copy + Paste the TOPAIMG.NHB in my storage card.
3) Disconnect USB between phone and pc.
4) Power off the phone (by holding the power button and press yes)
5) Press and hold volume down button and the power button
6) I see a rainbowscreen with the specs i persume from my phone
7) for 0,5 sec, i see the following:
Loading...
No image file!
8) Rainbowscreen again, and on the bottem 'serial' in the white color.
What did i do wrong? It should work..
Its very annoying to have a phone in a language you dont understand
Thanks in advance
J-r0en
Edit:
Currently i cant flash through my pc with active synch connection because my laptop is back to the factory for repair.
Cant find the Cd that came with the phone to install windows mobile device center, which is for vista+ , and this pc is xp professional. :\
2) Copy + Paste the TOPAIMG.NBH in my storage card.
Further try formatting your SD-card with FAT32. That in combination with renaming your file to the right extension, should work.
Thanks for the response.
I made a typo in the openingspost.
The image file on the storagecard is TOPAIMG.NBH.
I flashed the current ROM via the storagecard so it should
be fat32. I'll try to reformat the storagecard and see what happens.
*thumbs up*
It didnt work, any other ideas ?
my original rom was in another language, maybe that aint allowed? to flash a new rom in a different language.
True, unless you have HSPL this won't work.
Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work
J-r0en said:
Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work
Click to expand...
Click to collapse
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...
BumAround said:
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...
Click to expand...
Click to collapse
Nope, no typo's, "TOPAIMG.NBH" just like that =p
Have you tried TOPAIMG.nbh (lower case .nbh)?
I had the same issue flashing the original 6.5 OEM flash and Dutty's.
I have a 16GB card. I think that may be the issue. Perhaps 8GB or less will be recognised.
Anyway. All I did was use the wrapper method.
I booted to HardSPL and then connected it to the PC, ran the wrapper file included with the firmware and went through the modified firmware wizard on the PC and all sorted
- Geoff
In case anyone else comes across this thread while having this problem...
I had the same problem with my Rhodium. The problem disappeared when I switched from formatting that particular SD card with FAT to FAT32.
So, try FAT32 and see if that helps!
Finally!!!! took me forever to fix this. So my problem was the same, after flashing a custom ROM thru RUU, I got stuck in the splashing screen and kept getting "No image file" in HardSPL. So my solution was "SWITCH my FAT32 8GB microSD with a FAT32 4GB microSD". That's all! hope this will help someone else too.
Happy New Year!!!
Well i didnt fix it, still didnt flashed the rom that i wanted (in dutch) but i went back to WWE, that díd work.. eventually
Hello guys,
got myself a BIG problem!!
I had installed a Nand version of android and it all worked fine but there was an update of the version so i thougt lets reinstal it all back to normal (WM 6.5) but the PC didnt recognized my phone the US doesnt work anymore
so i thougt it was a app i installed true Magldr 1.11 and tried to find it and delete it but unforuntly i had deleted all my setting and also the nand Android version!!!
when i tried to enter the 3 collerd screen it all runs op good and when i connent my USB it wil jam and keeps saying Serial and there will not get any text of USB
and when i do the Magldr screen and want to connect to SD card also the phone Jams and i need to disconnect the Battery and restart the phone and i can do the same things again......
Anyone got a suggestion to get my phone back up running!!
PS its about the HTC HD2 and i got the latest Radio and HSPL!!
Greating DragonRX
DragonRX said:
Hello guys,
got myself a BIG problem!!
I had installed a Nand version of android and it all worked fine but there was an update of the version so i thougt lets reinstal it all back to normal (WM 6.5) but the PC didnt recognized my phone the US doesnt work anymore
so i thougt it was a app i installed true Magldr 1.11 and tried to find it and delete it but unforuntly i had deleted all my setting and also the nand Android version!!!
when i tried to enter the 3 collerd screen it all runs op good and when i connent my USB it wil jam and keeps saying Serial and there will not get any text of USB
and when i do the Magldr screen and want to connect to SD card also the phone Jams and i need to disconnect the Battery and restart the phone and i can do the same things again......
Anyone got a suggestion to get my phone back up running!!
PS its about the HTC HD2 and i got the latest Radio and HSPL!!
Greating DragonRX
Click to expand...
Click to collapse
Boot into bootloader and then get the .nbh file from the wm rom you want to flash and copy that to the root of your sd card (formatted FAT32) and flash via sd card.
ClydeB1 said:
Boot into bootloader and then get the .nbh file from the wm rom you want to flash and copy that to the root of your sd card (formatted FAT32) and flash via sd card.
Click to expand...
Click to collapse
Thanks for the fast reply on my post,
butt what if i want to reinstal it back to te stock WM 6.5 do i need to put the RUU_Leo on my sd card??
and what did u mean with the bootloader the 3 collerd screen or the home screan of Magldr??
Just do the following:
Download a WM 6.5 ROM
Extract the .NBH file from the ROM to your SD card. (If you have to remove SD card and put into computer to be able to access it then do that)
Rename .NBH file on SD card "leoimg.nbh"
Turn phone off
Hold vol down button while pressing power button to enter bootloader
Phone should recognize the leoimg.nbh file on SD card and flash it to your phone
DragonRX said:
Thanks for the fast reply on my post,
butt what if i want to reinstal it back to te stock WM 6.5 do i need to put the RUU_Leo on my sd card??
and what did u mean with the bootloader the 3 collerd screen or the home screan of Magldr??
Click to expand...
Click to collapse
Get the stock ROM that you want to flash back to and you can unzip it with something like winrar or 7zip (it's a self extracting zip file really). The just rename the .nbh file to leoimg.nbh and put it in the root of your SD card. Start the phone in bootloader (tri-colour screen) and it should automatically flash the ROM for you.
Hope this helps - good luck mate.
Edit: Or what Digital Outcast posted while I was typing
thanks guys for the fast reply's will try it out as soon as i'm gettig @home
i'm @work so dont got a usb flasher over here (A)
again thanks and I hope this works!!!
Good luck
Thanks guys my phone is working again(Y)
but still no USB
so ony of u guys got a idee what happend to the USB connection??
Or anybody else
Your usb port is prolly busted meaning you have to get your motherboard fixed sadly.
try a different cable and usb port to start with rather than assume the usb is broke onthe phone
as described above, my HTC HD Mini doesent boot anymore. After the HTC logo, the display remains just black and nothing happens. In the boot menu, I'm still there and says:
PB92100
SPL-1.06.0000
ENGID 0xF
PCBID 0x80
I have tried tried to install standart ROM many times. The installation is always succesfully. But there is no OS! its always the same problem! ithink i can´t write on the NAND. There is NO OS!
ROM install says:
from
Image version:
to
Image Version: 1.36.407.1
According to installation everything goes smoothly, but the phone has no OS, and therefore still does not boot!
It would please me very much if you could help me!
NO FORUM COULD HELP ME FOR NOW!
Sorry 4 my bad english
can noone help me??? i think thats the best xda forum ....
what happens if you try hard reset ?
nothing. same problem.
Try From SD card
Try recover from sd card.
TUTORIAL:
DOWNLOAD ORIGINAL ROM
EXTRACT (with WinRAR) File RUU nbh ...
FORMAT sd card in FAT 32 (as does HD2 2GB SD Sandisk)
COPY FILE to SD CARD
RENAME FILE RUU: PHOTIMG.nbh
SD CARD TO PUT IN THE PHONE
TURN IN BOOTLOADER (volume down + POWER)
VIDEO TO FOLLOW THE INSTRUCTIONS.
ROM (EU ROM) TESTED ON MY PHONE 100%
osmarsilva said:
Try recover from sd card.
TUTORIAL:
DOWNLOAD ORIGINAL ROM
EXTRACT (with WinRAR) File RUU nbh ...
FORMAT sd card in FAT 32 (as does HD2 2GB SD Sandisk)
COPY FILE to SD CARD
RENAME FILE RUU: PHOTIMG.nbh
SD CARD TO PUT IN THE PHONE
TURN IN BOOTLOADER (volume down + POWER)
VIDEO TO FOLLOW THE INSTRUCTIONS.
ROM (EU ROM) TESTED ON MY PHONE 100%
Click to expand...
Click to collapse
It's not cool to copy other people's things and publish as your own. So You bring yourself to the risk that someone might think you're very smart, and someone else that you are a thief. Link to other users post instead of copying it.