Database Users

Storage card flashing problem.. "No image file!"

Hello everybody,
2 days ago i flashed the dutty r5 NOR by accident, should have been NLD.
I cannot understand NOR whatsoever so i tried to re-flash my phone with the NLD version, but when i go into bootloader mode it cant find the image file. Im sitting at 90% battery charge.
What i do:
1) USB connection between phone and pc.
2) Copy + Paste the TOPAIMG.NHB in my storage card.
3) Disconnect USB between phone and pc.
4) Power off the phone (by holding the power button and press yes)
5) Press and hold volume down button and the power button
6) I see a rainbowscreen with the specs i persume from my phone
7) for 0,5 sec, i see the following:
Loading...
No image file!
8) Rainbowscreen again, and on the bottem 'serial' in the white color.
What did i do wrong? It should work..
Its very annoying to have a phone in a language you dont understand
Thanks in advance
J-r0en
Edit:
Currently i cant flash through my pc with active synch connection because my laptop is back to the factory for repair.
Cant find the Cd that came with the phone to install windows mobile device center, which is for vista+ , and this pc is xp professional. :\

2) Copy + Paste the TOPAIMG.NBH in my storage card.
Further try formatting your SD-card with FAT32. That in combination with renaming your file to the right extension, should work.

Thanks for the response.
I made a typo in the openingspost.
The image file on the storagecard is TOPAIMG.NBH.
I flashed the current ROM via the storagecard so it should
be fat32. I'll try to reformat the storagecard and see what happens.
*thumbs up*

It didnt work, any other ideas ?
my original rom was in another language, maybe that aint allowed? to flash a new rom in a different language.

True, unless you have HSPL this won't work.

Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work

J-r0en said:
Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work
Click to expand...
Click to collapse
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...

BumAround said:
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...
Click to expand...
Click to collapse
Nope, no typo's, "TOPAIMG.NBH" just like that =p

Have you tried TOPAIMG.nbh (lower case .nbh)?

I had the same issue flashing the original 6.5 OEM flash and Dutty's.
I have a 16GB card. I think that may be the issue. Perhaps 8GB or less will be recognised.
Anyway. All I did was use the wrapper method.
I booted to HardSPL and then connected it to the PC, ran the wrapper file included with the firmware and went through the modified firmware wizard on the PC and all sorted
- Geoff

In case anyone else comes across this thread while having this problem...
I had the same problem with my Rhodium. The problem disappeared when I switched from formatting that particular SD card with FAT to FAT32.
So, try FAT32 and see if that helps!

Finally!!!! took me forever to fix this. So my problem was the same, after flashing a custom ROM thru RUU, I got stuck in the splashing screen and kept getting "No image file" in HardSPL. So my solution was "SWITCH my FAT32 8GB microSD with a FAT32 4GB microSD". That's all! hope this will help someone else too.
Happy New Year!!!

Well i didnt fix it, still didnt flashed the rom that i wanted (in dutch) but i went back to WWE, that díd work.. eventually

No image or wrong image! when flashing PC36IMG.zip

I have reloaded the stock RUU back onto my phone with no issues, but when I try to flash PC36IMG.zip I get stuck. I have downloaded the file several times using multiple browsers and have even downloaded it using my phone and placed it in the root of the sd card with the same result. Here is the log that is generated when trying to load the image:
SD Checking...
Loading...[PC36DIAG.zip]
No image!
Loading...[PC36DIAG.nbh]
No image or wrong image!
Loading...[PC36IMG.zip]
No image!
Loading...[PC36.IMG.nbh]
No image or wrong image!
There may have been more lines but the only way I could get this log was to try to snap a picture of it because it only shows for about a second. I have noticed that several people are having the same issue and thought it would be nice to have a thread started to find a solution or determine if we are doing something wrong. Attached is a screenshot of the error.
Update: Reformating the card fixed the issue!

Use a different micro sd card, re-download on the new card

I am not using the original 8GB card, I am using a 16GB card but good suggestion I will try that. I hope it is that simple.

Format your SD card to FAT32

It is currently using FAT32 already but I am going to try a reformat and see what happens, will post results soon.

It's the card. I had the exact same problem using a 1gb card and ended up having to use the card from my Droid. I'm not sure why it happens though, I thought it was because hboot needed a sdhc card but your using one so I dunno.

Thanks a lot a reformat of the SD card did the trick! I have been trying everything and that worked!!! Im happy now

I had this problem too. I tried re-downloading the file, formatting the card in my Evo, formatting it with the sd card formatting app in Windows. Nothing fixed it. I FINALLY booted my netbook into Ubuntu (Linux) and formatted from Gparted (FAT32). That did it. So, if you have a Linux box available, try that. Or a live Linux CD/DVD would work too.

Same problem i formatted my card and it still doesnt work for me any advise?

acenick3 said:
Same problem i formatted my card and it still doesnt work for me any advise?
Click to expand...
Click to collapse
If you have access to a different MicroSD card I would try that, I can confirm that it is definitely a problem with the card though. One other suggestion is using Linux disk management program I heard one person say windows could not format it properly then used Linux and the card worked fine afterwards.

thanks jdickerman ill give it a try and post results soon

nope tried everything formatting the card and i got a new 4gb sd card and still the same problem

I had this same problem.
With Windows 7 machine, I formatted the stock 8GB microSD with Fat32(default) with 4096bytes. I used a "quick format" and then a copy and paste to move the PC63IMG.zip file to the card.
This worked for me.
-Sam

I am having the same problem - I've tried formatting using windows and now linux and still get the same results.
No image and No image or wrong image.
I also get a message saying - update failed Main version is older!
no matter what I've tried the results are always the same. Suggestions?

I - sort of - have the same problem.
When it hits "PC36DIAG.zip" it says "No image!"
when it gets to "PC36IMG.zip" though - it starts updating Boot/Bootloader/MICROP/etc etc
Am I missing something from the PC36DIAG.zip? Phone works fine...

Make sure the .zip is not corrupt by trying to extract it on your PC first.
I had this same error and noticed the file was corrupt when I tried to extract in on my notebook. I re-downloaded the file, copied it to the SD and all is well.

Remove the .zip on the file name. I had the same problem because I named the file PC36IMG.zip it already is a zip file so just name it PC36IMG. This worked for me. Goodluck!

will this get rid of these messages and still keep root??
i need to return my phone for i have the light leakage, and it is getting worse.

same problem
I am at my wits end. I have tried everything that has been suggested in this thread. When I try to update the radio in my HTC incredible, I get the message "no image or wrong image". It is weird because when the bootloader reaches the "ZIP" stage, it looks like it installs the software. I see a status bar on the right side of the screen. But then when I reboot, I have the same version of the radio.
I have reformatted the SD card twice now (both times using different FAT32 options). I have verified that the MD5 signature of the ZIP file is correct. I have made sure that I download the file directly to the phone and not copy it over the USB cable. Nothing works. I always have the same result.
This is really bothering me, because when I update to one of the modified ROMs, everything except my GPS functionality works. According to another thread, my problem is that I am using version 1.00xxx of the radio software. But nothing I do allows me to install the update.
The only thing I have not tried is reformatting using Linux. But I have very little confidence that will work, and given the amount of work it would take to install Linux...I am hoping there is another option. Other people in this forum seem to have been successful reformatting the SD card using windows.
Thanks for any pointers!

jdickerman76 said:
I have reloaded the stock RUU back onto my phone with no issues, but when I try to flash PC36IMG.zip I get stuck. I have downloaded the file several times using multiple browsers and have even downloaded it using my phone and placed it in the root of the sd card with the same result. Here is the log that is generated when trying to load the image:
SD Checking...
Loading...[PC36DIAG.zip]
No image!
Loading...[PC36DIAG.nbh]
No image or wrong image!
Loading...[PC36IMG.zip]
No image!
Loading...[PC36.IMG.nbh]
No image or wrong image!
There may have been more lines but the only way I could get this log was to try to snap a picture of it because it only shows for about a second. I have noticed that several people are having the same issue and thought it would be nice to have a thread started to find a solution or determine if we are doing something wrong. Attached is a screenshot of the error.
Update: Reformating the card fixed the issue!
Click to expand...
Click to collapse
same here …
I have no clue where to go with this and I cant update or get s-on because of it
please help

Help me please... X8 problem

I need your help to do with the phone, which i broke a little i think..
The thing is when try out custom rooms, everything ok, but did not like anything in the custom rooms so i put back original soft ..
I used the backup, as well as the use Seuss .. To do this all the old way, but there is only one problem, when i connect my phone to pc, it doesnt mount sd card.. or someting is just black...
When you make phone present at the computer, he dont mount USB MASS storige device ... In other words, do not show when I have a Mirco SD CARD added ...
Phone in itself recognizes card and read out there on the files in ... Putting Mirco SD card in the ordinary SD apdapter computers read everything okey ... Putting it in another phone the same X8 also read .. Something is wrong with the phone .. and i dont know how to fix it ... I try 100x times new updates .. nothing does not help .. But imposing version of 1.6 everything goes and works ... but again that has just under 2.1 Where is my usb dont mounts ...
Maybe someone is exposed it when doest mount usb ...
Google found a solution, but it is only 2.3 version of the original fighting android Rom, or as they are called ..
forum.xda-developers.com/showthread.php?t=859571
Perhaps there is some way to get this worked on my phone ..
Phone: Sony Ericsson X8 e15i
OS: 2.1

may i suggest a few tests?
1. try connecting the phone to a different USB port, preferably at the back of the pc. dont connect it to a usb hub
2. If you had previously made ext partitions to use the app2sd native faeature, then delete all partitions from sd and reformat fat32. even if u havent made any partitions i suggest u reformat the SD
3. change usb cable, i have seen it before.
Are u using the original 2GB SD card, or another one bigger capacity?
I assume that u have flashed with SEUS the stock ROM 2.1 and have again tried.
This might not be a phone or ROM problem but maybe PC problem....

I agree gxaris, it look like it's problem with pc.
Did You tried to reinstall PCcompanion (it could be just driver problem).

I have the same problem a long time ago. I think there's something wrong with the phone. I've tried my cousin's X8, my PC can detect and mounts his SD Card. so I think the problem is not PC, its the phone itself. tbh I do nothing with it. Taking out SD card and put it in card reader doesn't kill me, I can live with that.
Sorry for not giving help, but I've tried many times to fix it, but no luck man.

HaN6787 said:
I have the same problem a long time ago. I think there's something wrong with the phone. I've tried my cousin's X8, my PC can detect and mounts his SD Card. so I think the problem is not PC, its the phone itself. tbh I do nothing with it. Taking out SD card and put it in card reader doesn't kill me, I can live with that.
Sorry for not giving help, but I've tried many times to fix it, but no luck man.
Click to expand...
Click to collapse
Its realy sad, that for x10mini their is solution to download xrecovery 0.3... maybe some knowing people can make it to fix x8 phone to... I realy want so my phone can again mount to pc...
I hate using allthetime sd cardreader...
bigest questions is why.. with android 1.6 everythings works like it so postu do...
buth when i make 2.1 android version it dont mount again...
I used SEUS and PCcompenion...

Disconnect phone, uninstall driver, reboot pc and reinstall driver. Have you already formatted the sd card?
Sent from my X8 using xda premium

l1nkiboy said:
Disconnect phone, uninstall driver, reboot pc and reinstall driver. Have you already formatted the sd card?
Sent from my X8 using xda premium
Click to expand...
Click to collapse
do you think i dint do thath, did you read...my post.. i sed i have done everything...
formated 100x times sd card and card isnt problem.. updatet 100x times phones, flashing,reupdating nothing works...
allready one people have this problem like me... read post please
CAN SOMEONE PLEASE MAKE xRECOVERY 0.3 with usb mouting fixed so it can work with x8 ? so i can fix my problem...
If you can then turorial step by step how to do.. forum.xda-developers.com/showthread.php?t=859571

will anyone help ?

You can use CWM recovery, it have "mount sdcard" option - I used it few times.

bump.........

[Q] SD Card Trashed, any ideas?

Hoping someone may have a way out of this:
Running 'BTTF' ROM which I installed on a 4gb SD card in my EU HD2, all was working fine. I have an 8gb card which I know works with the ROM and I figured, somewhat foolishly it seems, that if I rebooted the phone with the blank 8gb card in the handset, it would be formatted for use in the phone automatically.
To cut a long story short, on reboot, the phone gave an error saying SD card had changed, not working or not compatibe - replace & reset etc. Tried a hard reset but stil no go. The card now seems to be unusable - windows won't recognise it, SD Formatter says 'Card Unsupported' (even though it was supported yesterday!).
What's worse, on re-inserting the original 4gb SD, the phone gives the same error, so I have effectively lost my BTTF installation. Reflashed back to stock wm6.5, phone says 'insert card' when i try to format.
Tried searching here but found no similar situations that people have resolved. Sure, I can just replace the card and re-install, but my nature is to try and figure it out, lol.
Anyone any ideas?
Cheers in anticipation...
Rich
Edit: I've tried the card in 2 different digital cameras to see if I could format it and both reported 'card error'. Does seems as though its beyond salvation...

Same problem, nokia can't format it either

Comforting to know I'm not alone erikstelt. Can anyone bring this to the attention of the Dev forum please? Unable to ask there because of post count...
Have searched n searched but to no avail...

Is is possible that your cards are now locked? I think this happened to me once as well. This is what I did.
1.) Reflash back to the stock wm6.5
2.) Reinstall Magldr 1.13
3.) Then flash the "Back To The Future" [xbmod-yuki] ROM with your card in the phone. Found here: http://forum.xda-developers.com/showthread.php?t=1236027
4.) Use the cab sender to install the Dev Unlock cab found here: http://xboxmod.sylvester20007.com/CABS/TWEAK.CAB/
5.) If it won't install, update to the nodo build (7392) and try again. That's what I did.
6.) Run the unlock app to unlock the card. If successful, immediately remove the card from the phone. You can now put in the other card and run it again.
7.) Now try to see if both cards are recognized on your windows machine or in SD Formatter. If so, reformat them for use again. Hope this helps.

Hi guys!
Sorry to hear that you are having problems WP is a little picky about the mem-card so best not to play around with it to much!
Anyway as an alternative I can report having had good results with ultimate boot cd Linux seems to be happy to unlock encrypted cards as long as you use the correct kernel... Give it a shot! Can be found on Google etc.
Regards!
/Anders

Sean Sounds said:
Is is possible that your cards are now locked? I think this happened to me once as well. This is what I did.
1.) Reflash back to the stock wm6.5
2.) Reinstall Magldr 1.13
3.) Then flash the "Back To The Future" [xbmod-yuki] ROM with your card in the phone. Found here: http://forum.xda-developers.com/showthread.php?t=1236027
4.) Use the cab sender to install the Dev Unlock cab found here: http://xboxmod.sylvester20007.com/CABS/TWEAK.CAB/
5.) If it won't install, update to the nodo build (7392) and try again. That's what I did.
6.) Run the unlock app to unlock the card. If successful, immediately remove the card from the phone. You can now put in the other card and run it again.
7.) Now try to see if both cards are recognized on your windows machine or in SD Formatter. If so, reformat them for use again. Hope this helps.
Click to expand...
Click to collapse
I would recommend the above quoted option, as this happened to me, however, i used DEV_STORAGELOCK instead of DEV_UNLOCK.
Found in http://xboxmod.sylvester20007.com/CABS/TWEAK.CAB/SDCARD/
If you get errors trying to apply the DEV_STORAGELOCK.cab, as I did, using the cab updater in win7 in this situation, you might try this trick (it always works for me).
Plug in HD2
Open Zune
Let Zune detect device
Open WP7 Update Cab Sender (put DEV_STORAGELOCK.cab in folder first), BUT DO NOT UPDATE JUST YET
Unplug/disconnect your Internet connect, then re-connect (kind of like the method of forcing Zune to update WP7 to Mango)
Immediately update using (S)end or (B)ackup in WP7 Update Cab Sender (may have to press several times as win7 attempts to reconnect to the interent.
Again, this worked for me, can't guarantee that it will work for you.

Sean Sounds said:
Is is possible that your cards are now locked? I think this happened to me once as well. This is what I did.
1.) Reflash back to the stock wm6.5
2.) Reinstall Magldr 1.13
3.) Then flash the "Back To The Future" [xbmod-yuki] ROM with your card in the phone. Found here: http://forum.xda-developers.com/showthread.php?t=1236027
4.) Use the cab sender to install the Dev Unlock cab found here: http://xboxmod.sylvester20007.com/CABS/TWEAK.CAB/
5.) If it won't install, update to the nodo build (7392) and try again. That's what I did.
6.) Run the unlock app to unlock the card. If successful, immediately remove the card from the phone. You can now put in the other card and run it again.
7.) Now try to see if both cards are recognized on your windows machine or in SD Formatter. If so, reformat them for use again. Hope this helps.
Click to expand...
Click to collapse
Thanks guys, this was going to be my next plan of attack - will try tonight and report back...

Well, re-flashing Yuki ROM didn't work - it installed ok but upon reboot gave the same 'SD Card Error' message!
I will try the Linux boot CD next...

rniblett said:
Hoping someone may have a way out of this:
Running 'BTTF' ROM which I installed on a 4gb SD card in my EU HD2, all was working fine. I have an 8gb card which I know works with the ROM and I figured, somewhat foolishly it seems, that if I rebooted the phone with the blank 8gb card in the handset, it would be formatted for use in the phone automatically.
To cut a long story short, on reboot, the phone gave an error saying SD card had changed, not working or not compatibe - replace & reset etc. Tried a hard reset but stil no go. The card now seems to be unusable - windows won't recognise it, SD Formatter says 'Card Unsupported' (even though it was supported yesterday!).
What's worse, on re-inserting the original 4gb SD, the phone gives the same error, so I have effectively lost my BTTF installation. Reflashed back to stock wm6.5, phone says 'insert card' when i try to format.
Tried searching here but found no similar situations that people have resolved. Sure, I can just replace the card and re-install, but my nature is to try and figure it out, lol.
Anyone any ideas?
Cheers in anticipation...
Rich
Edit: I've tried the card in 2 different digital cameras to see if I could format it and both reported 'card error'. Does seems as though its beyond salvation...
Click to expand...
Click to collapse
Same problem here! Two 8GB cards are broken... lets try boot cd solution...
Enviado desde mi Transformer TF101 usando Tapatalk

Dont bother wasting your time with the linux method it wont work!
I used a nokia N8 today at my local shop within a few seconds my card was formatted, ive tried everything else nothing worked! (well didn't try using cab sender never been able to send cabs)

waz000000 said:
Dont bother wasting your time with the linux method it wont work!
I used a nokia N8 today at my local shop within a few seconds my card was formatted, ive tried everything else nothing worked! (well didn't try using cab sender never been able to send cabs)
Click to expand...
Click to collapse
Now I need a N8...
Enviado desde mi Transformer TF101 usando Tapatalk

javieritos said:
Now I need a N8...
Enviado desde mi Transformer TF101 usando Tapatalk
Click to expand...
Click to collapse
No. Any nokia phone will work. I would try gparted as well.
Sent from my HTC HD2

Aurora ICS sdcard problem.

First I want to thank dzo for his amazing work. Thanks to him, we now have an almost fully functional ICS port!
Now, to get to the point... I upgraded from dzo's v.1.1 to v1.2 ICS yesterday. The ROM is very nice and smooth, and it seems like everything is functioning like it should. BUT, after my first reboot after flashing v1.2, I got the message about corrupt sdcard. So I rebooted into recovery, then rebooted to recovery through recovery again P), and then rebooted normal. The message was still there, so I unplugged the sdcard from my phone and plugged it into my computer through a cardreader. The PC said I had to format it before use, so that's what I tried.. the format-window hung up, and stood still on 0% for about an hour. I got kinda bored of waiting and unplugged the sdcard, then put it back into my phone. Now my phone says something like: "blank sdcard or has an unsupported filesystem etc.). I've tried several sdcard formatting programs, but nothing seems to work :S Now my PC doesn't even recognize my sdcard as an sdcard anymore, but as an empty disk or something.
The worst part is that I actually bought my sdcard yesterday, the same day as got corrupted/blank..
any tips would be appreciated!
edit: My sdcard is a SanDisk Class 4 16GB

Hi,
I have the same sdcard and in most cases my U8800 Pro does not mount correctly this microsd. I don't know if this is a kernel problem or a rom problem.
Anyway I advice you to format your sdcard with a specific format-tool, please download it here:
https://www.sdcard.org/downloads/formatter_3/sdfmt3_1.zip
This is a free software developed by Panasonic (if I'm not wrong).
This tool helped me with my sdcard BUT I have to say that Huawei U8800 is a little buggy for the sdcard mount.
Regards
kalo86

kalo86 said:
Hi,
I have the same sdcard and in most cases my U8800 Pro does not mount correctly this microsd. I don't know if this is a kernel problem or a rom problem.
Anyway I advice you to format your sdcard with a specific format-tool, please download it here:
https://www.sdcard.org/downloads/formatter_3/sdfmt3_1.zip
This is a free software developed by Panasonic (if I'm not wrong).
This tool helped me with my sdcard BUT I have to say that Huawei U8800 is a little buggy for the sdcard mount.
Regards
kalo86
Click to expand...
Click to collapse
Thanks for your reply! Actually I have allready tried ths program. I installed, and opened it. Then I connected the sdcard to the PC, but the program said it couldn't recognize it... So just to be sure it wasn't the program, I tried to connect another sdcard, and that one was recognized. Weird stuff...
Maybe the card is just broken?

This happened to me too. There is nothing you can do, the sd card is broken. Reformatting is impossible, since no reader will recognize the card. You'll just have to buy a new card or get it replaced via warranty.

I have the exact same problem olfyboy, I think the card is ruined

That sucks! :/
well.. time to use my good old 2gb then..

hello guys
plug you sd card in your mobile go in recovery and check did it show your sd card there if not go in advance option reboot in recovery again...
i hope this time you see your sd card
if it this method not work then put ur sd card in some Symbian phone (Nokia, sony ericsson) in symbian phone you are able to format
i hope this method work for you best of luck

maybe a software named Usboot can help you.

Pls try aurora 1.4. Dzo solved sdcard problem

Thanks for your replies guys!
Sadly I think my sdcard is completely broken. No device is able to recognize it, and those who can, says that it's completely blank or does not have a supported file-system.

olfyboy said:
Thanks for your replies guys!
Sadly I think my sdcard is completely broken. No device is able to recognize it, and those who can, says that it's completely blank or does not have a supported file-system.
Click to expand...
Click to collapse
From those devices that recognize it, can you format it? Put some files on it?

Blefish said:
From those devices that recognize it, can you format it? Put some files on it?
Click to expand...
Click to collapse
No..
Those who can recognize it, and says that it needs to be formatted, doesn't do anything when I click format.
And, no, I can't put any files on it.

olfyboy said:
No..
Those who can recognize it, and says that it needs to be formatted, doesn't do anything when I click format.
And, no, I can't put any files on it.
Click to expand...
Click to collapse
I'm still in the same position too, I've tried all the suggestions here.
I can read files but can't write or format.
Read speed is VERY slow (a few bytes per second)

I can't even read my files. I tried my sdcard with 2 different pcs. And none of them recognize it. I think its ruined.

Any news? Is there anyone with solution? :/

Özgürce said:
Any news? Is there anyone with solution? :/
Click to expand...
Click to collapse
No.. our sdcards are probably completely broken. Nothing to do with it :/ The only thing you can do about it, is really just to buy a new one.
I, myself, have ended up using an old 2gb sdcard..

I don't get why is happens or why it only happens to us. Any ideas what caused it? I don't care sd-card but I really want my images back in that card. =)

Maybe I can help you
Özgürce said:
I don't get why is happens or why it only happens to us. Any ideas what caused it? I don't care sd-card but I really want my images back in that card. =)
Click to expand...
Click to collapse
what is the OS on your PC?
maybe I can help you. first of all you have to install a recovery software on your PC ( I prefer "Recover My Files") and extract your photos from SD to your PC.
then if you ask me I will tell you how to format your SD and use it again.

Idk is it a same situation but 2 weeks ago my sd went broke. Ics was showing its empty which i was sure it wasnt. First i tried it with my old phone but no luck. I can connect it to my comp (both win and ubuntu) via sd card reader and no luck. Then i tried fix permissions in cwm and then it recognized, all my old files were there.
I know it doesnt make any sense but if you guys didnt try this just give it a luck.
G luck.
Sent from my U8800

mca_feat said:
what is the OS on your PC?
maybe I can help you. first of all you have to install a recovery software on your PC ( I prefer "Recover My Files") and extract your photos from SD to your PC.
then if you ask me I will tell you how to format your SD and use it again.
Click to expand...
Click to collapse
I think you misunderstood the situation. My phone or my pc doesn't recognize the sdcard. Thy not see ant disk when I attach it. I know what your meaning but the problem bigger than this.
,