I have a Nook Simple Touch Glowlight with software verion 1.1.5. All the information that I've been able to Google is for 1.1.2, in fact that is the version that I still see on the B&N website.
I _think_ that I have found a suitable way to root the device with Nooter but I would like to know how to confirm that in fact this is the right project for my software version. I'm sorry that I cannot post a link to the Nooter project, but I have less than 10 posts.
Thanks.
There are at least two methods that work with the Glowworm.
You should not use any method until after you have
- made a noogie disk
- booted from it
- backed up your device
- restored that backup to a test disk (a 2 gig or larger microSD card, for instance) and confirmed that the test results in a disk that has 8 partitions.
Many people have made the backup but not tested it; when they tried to restore, they did bad to fatal things to their devices. A very common failure on restore seems to be only getting one partition restored and blowing out the other partitions.
I don't know if the stuff that eded is working on has come to fruition yet - he was looking at building a tool that could detect whether it was run on an NST or NSTG and root appropriately to the device.
The two routes I know work are:
- glownooter, the nooter project tool, includes Google apps and market support
- tinynoot, pasted together from various tools, gives you minimal root without google apps and with amazon appstore. Will work with either NST or NSTG because it's approach is so minimalist.
Thanks, roustabout! I will be sure to test the backups before I install anything else, then. Good to know!
In any case, what I am most concerned about is getting the right version of the rooting software for my device. I see that Nook devices have different firmware and that certain tools only work with certain firmware versions. I see no mention of my firmware version in any tools' websites, hence my apprehension.
hence the value of a backup
I saw your request on that and I think one of the issues here is that so many folks use Windows exclusively, and the backup process is so easy on linux that trying to tell people how to do it in Windows is like jabbing yourself in the eye with a stick, given that linux is free, vmware player is free, and linux can be installed and used for this job entirely in vmware player. On the other side of the coin, if you know nothing of linux, even using dd correctly will be a challenge since there's a pretty steep learning curve behind setting up a new OS successfully just to be able to get backups off an 80-130 dollar device.
In your case: as of now, there is only one firmware release for the glowlight. This is why the folks with the tools aren't mentioning it, aside from 'this is for a glowlight.'
I didn't mention it, but I also use Linux at home (Kubuntu, like Ubuntu but with a better UI). So many people are now using Ubuntu that I find it surprising that the instructions even bother mentioning the OSes for which the operation is as difficult as you say. I remember when doing things in Linux was hard and Windows was easy, and at that time Linux was hardly ever mentioned!
In your case: as of now, there is only one firmware release for the glowlight. This is why the folks with the tools aren't mentioning it, aside from 'this is for a glowlight.'
Click to expand...
Click to collapse
I did not realize that the 1.1.5 release is glowlight-only. Great, thanks, I'm on to hacking this thing!
ok, so for you the backup process is:
- make the noogie disk
- put it into your device
- power cycle your device
- when it boots to "rooted forever," connect the USB cable to your linux box
- once the linux box mounts the NSTG as storage, pay attention to which device it is mounting it at. Assuming it's sdX:
- backup with dd if=/dev/sdX of=backup.img bs=1M
When that's done, disconnect your NSTG, throw media of some sort, larger than 2G, onto your box and test your restore with
dd if=backup.img of=/dev/sdY bs=1M
Once that's done, do an
fdisk /dev/sdY
and a
p to print the partition table.
You should have 8 partitions (and your backup.img file should be just under 2 gig.)
Hack away; if you ever need to restore, you can just drop the virgin image back on.
I take a snapshot like this of my device every so often since remembering how I got to whatever config I liked is harder than just backing it up.
Thanks for the backup instructions, the idea of testing it on a DVD-ROM looks to save quite a bit of trouble with the actual device..
I rooted with this terrific guide:
http://forum.xda-developers.com/showthread.php?t=1675706
The process was simple. I do have an issue where I need to install a Hebrew font but ES File Manager doesn't seem to see the root folders. I'm having a hard time googling my way out of this one, bu all the other little issues were fairly simple.
One issue that I will mention that was hard to solve was the inability to perform searches in the Market. This page helped me resolve that issue:
blog.the-ebook-reader . com/2011/07/15/rooted-nook-touch-fixing-market-search-and-other-tips-and-tricks-video/
I just figured out that the file manager has to have Root permissions enabled. I've enabled it and added some fonts to /system/fonts but I still cannot get Hebrew text to display on this device. All I get are the typical rectangles instead of characters. Any ideas about how to proceed?
Thanks.
Restore Nook 1.1.2
roustabout said:
Many people have made the backup but not tested it; when they tried to restore, they did bad to fatal things to their devices. A very common failure on restore .
Click to expand...
Click to collapse
1. I made this exact same mistake yesterday and I ended up with a bad backup.
2. My Nook Simple Touch (1.1.2) is now not working because I wiped ALL the partitions before attempted to restore the backup (which I didnt know was bad at the time)
3. Please help me restore the Nook back to factory or any working state. Are there any restorable backup images that can be downloaded online?
p.s. I have tried touchnooter and installed touchformatv2 but all I get now is a Read Forever load screen.
Please Please Help Me Im so sad (I know this is down to carelessness on my part but I really need help)
bubblewrapper said:
1. I made this exact same mistake yesterday and I ended up with a bad backup.
2. My Nook Simple Touch (1.1.2) is now not working because I wiped ALL the partitions before attempted to restore the backup (which I didnt know was bad at the time)
3. Please help me restore the Nook back to factory or any working state. Are there any restorable backup images that can be downloaded online?
p.s. I have tried touchnooter and installed touchformatv2 but all I get now is a Read Forever load screen.
Please Please Help Me Im so sad (I know this is down to carelessness on my part but I really need help)
Click to expand...
Click to collapse
Few people who will be knowledgeable will find your post buried here under this thread. i suggest that you simply start a new thread with a good descriptive title so that the gurus will find it.
Not sure how to get hebrew working. One assumes that in addition to the characters, you need it to right to left? If it's the latter, I know there was a thread discussing doing this with Arabic, and I'm not sure how that turned out. You can also google around for folks looking at this on, I think, mobilereads.
roustabout said:
Not sure how to get hebrew working. One assumes that in addition to the characters, you need it to right to left? If it's the latter, I know there was a thread discussing doing this with Arabic, and I'm not sure how that turned out. You can also google around for folks looking at this on, I think, mobilereads.
Click to expand...
Click to collapse
Actually, I think that I just need the fonts (or at least that would be a great first step). I put fonts with Hebrew glyphs in /system/fonts (using ES File Explorer in Root mode) but even after a restart it does not find the fonts (i.e. Hebrew text still shows as rectangles). I will fight with it some more in the coming days, if I don't succeed I will start a new, concise thread on the topic. There are plenty of Google posts on the subject, but all of the ones that I have seen (not Nook-specific) suggest that dropping the fonts is /system/fonts should be enough. Perhaps it is a permissions issue, I'll see if I can SSH into the device to see permissions.
dotancohen said:
I have a Nook Simple Touch Glowlight with software verion 1.1.5. All the information that I've been able to Google is for 1.1.2, in fact that is the version that I still see on the B&N website.
I _think_ that I have found a suitable way to root the device with Nooter but I would like to know how to confirm that in fact this is the right project for my software version. I'm sorry that I cannot post a link to the Nooter project, but I have less than 10 posts.
Thanks.
Click to expand...
Click to collapse
Sorry that I am so slow to respond, but I think this is the information you need to root a Nook with Glow on version 1.1.5
It uses Glownooter
http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
and this is the backup routine
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
ladykayaker said:
Sorry that I am so slow to respond,
Click to expand...
Click to collapse
Thank you! You don't need to apologize for taking time to respond, you are under no obligation! But I very much do appreciate your assistance and am happy to wait patiently! You will notice that I usually google issues first to try to save us both the time!
I think this is the information you need to root a Nook with Glow on version 1.1.5
It uses Glownooter
http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
and this is the backup routine
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
Click to expand...
Click to collapse
Thank you. It seems that those posts are Windows-centric summerizations of information found here at XDA-developers. The root is pretty much the process that I used, but from the guide right here which has Linux directions as well.
By the way, the-ebook-reader site is often not responding for me. Is it just for me, or does everyone have trouble with that site?
Thanks!
version 1.2.0
UK glowlight ships with 1.2.0. Use tinynooter to root this. You may have issues installing apps atm though but you will get the browser at least.
http://forum.xda-developers.com/showthread.php?t=1961835
Thanks, Loney. In fact, I got this Glowlight in the US, and it reports that it has software verion 1.1.5. But the information will be good for others who might google this thread!
Related
Hello,
I'm new to the Nook Simple Touch and received it today. It's awesome so far!
1. Could someone tell me how I install CWM with it, is there a guide? I can't find any guide on the development section on xda, sorry.
2. Also, what is the best method to root my NST? Touch Nooter or Minimal Touch or another one?
3. Is there a stock ROM somewhere? I would want it, if I want to set my Nook back to the default settings and wipe everything if I'll mess it up somehow.
4. Can I update to the latest version 1.1.2 if I want to
+ root it
+ install CWM
+ install the multitouch function from here: http://forum.xda-developers.com/showthread.php?t=1563645
Is everything of this working with 1.1.2 or do I need 1.1.0?
5. And my last question is, what's the difference betwen N2E and NST in the development thread? (I know, NST = Nook Simple Touch, but what is N2E? I thought it's also the Nook Simple Touch)
I'm really, really sorry for those questions, but I'd be very happy if someone could answer them. I don't want to make something wrong with my beloved NST.
Thanks in advance!
Greetings,
Draygon
Welcome to the community!
Before you do anything, you're going to want to backup your Nook. Each Nook contains information specific to that Nook, such as the MAC address, serial number, etc., so this backup will be what will restore you to a stock out-of-the-box Nook. Just make sure you have an external card reader to write noogie.img to the SD card.
CWM is here, but there's no real reason to install it to the device itself. It's easier to install it to an SD card and just put that in when you need it. There's no custom ROMS yet, and it's better to use the backup you made earlier (hopefully).
Also, for rooting and installing multi-touch, I made a mini quick-start guide here.
For the most part, we haven't noticed much difference between rooting 1.1.0 vs. 1.1.2. And N2E stands for Nook Second Edition (this Nook came first).
Enjoy your Nook!
Hello Googie, Thanks a lot for your answer, they helped me a lot!
For sure I'll do the backup at frst.
Am I able to use N2E from the development forum on the NST? (like touchnooter?)
So, it's safe to update to 1.1.2 and root it? Because I have seen a few people on this forum complaning about bugs with a rooted 1.1.2, which aren't there with a rooted 1.1.0, such as that the search function is not working in the play stote with a rooted 1.1.2.
Would you recommend touch nooter or minimal touch?
Draygon said:
Am I able to use N2E from the development forum on the NST? (like touchnooter?)
Click to expand...
Click to collapse
The N2E is simply another name for NST, so it's safe to use anything with that name.
Draygon said:
So, it's safe to update to 1.1.2 and root it? Because I have seen a few people on this forum complaning about bugs with a rooted 1.1.2, which aren't there with a rooted 1.1.0, such as that the search function is not working in the play stote with a rooted 1.1.2.
Click to expand...
Click to collapse
There's not much difference between 1.1.2 and 1.1.0. B&N just addressed some WiFi issues with this update, not much has changed otherwise. And Google caused the searching issues by replacing Market with Google Play, it's just coincidence that the update came out when Google changed it.
Draygon said:
Would you recommend touch nooter or minimal touch?
Click to expand...
Click to collapse
I myself use Minimal Touch, but I haven't tried TouchNooter before. TouchNooter has some extra things with it (like a tool that under-clocks the CPU when it's not in use to save battery), but some times it fails to install correctly. And there's also the possibility that Market just won't work for 24 hours... but it's broken anyway.
Thanks again for the answers.
There's just one problem I have, which won't let me backup my NST:
From this guide: http://forum.xda-developers.com/showthread.php?t=1142983
I want to use the guide to backup the NST for windows 7 (post #2),
There's a big problem: the link to the noogie.img (which should be here: http://nookdevs.com/NookTouch_Rooting) was deleted.
1. Where can I get this noogie.img now? Could someone please upload it?
2. And the next problem is, how do I boot the noogie.img, if I have it? jocala just wrote, that you have to boot it. Not, how to boot it.
Thanks in advance!
http://www.thoughtsofthemasses.com/noogie.img.gz
burn the image it to sdcard, switch off your nook, plug in sdcard and turn nook on.
And small puzzle at the end: what does following message say about the nookdev page?
10:50, 11 January 2012 Spec (Talk | contribs) deleted "NookTouch Rooting" (content was: '#REDIRECT Nook_Simple_Touch/Rooting/Manual')
Are there any requirements that a microSD card must fill when used for this purpose? I have two fail notches on my lipstick case.
The first time I pulled a 256mb microSD card from an old phone; fail. Later I read it is recommended to use a Class 6 or greater. I bought a Class 10. Again, fail.
The adapter is electrically passive so that should not be a factor, right?
I never pay attention to that class stuff.
I always buy the Micro Center brand 4GB at $5.50 because they are only $1.50 more than 2GB.
Apparently they are Class 4.
Thank you, Renate NST. Then my problem lies elsewhere.
Between WinImage and Win32DiskImager has either shown a higher success rate for this project? Is one generally preferred by the community?
I use Win32DiskImager.
I've got about 10 different backups on my hard drive right now.
I've bricked my Nook multiple times trying to hack internals and restored from backup.
My backups end up by being 1,957,616,640 in size.
I don't use Clockwork or anything.
Thank you for providing the file size, that was helpful.
Is it odd that that the second backup (using noogie.img and DiskImage_1_6_WinAll.exe) was almost twenty-five times larger than the first? 79,675,392 verses 1,958,739,968.
If your backups are about 1.9xx Gigs then you are correctly backing up the entire physical internal memory of the Nook.
If your backups are 70 Megs or so you are either backing up only one of the 7 partitions on the Nook or
else you are backing up your SD card with Noogie on it.
Note:
After writing a Noogie image to an SD card you will find that the total size of the SD card has been reduced to 70 Megs or so.
To reclaim the entire size of the SD card for other uses you will need some tool like Partition Magic.
Windows Disk Management can not by itself repartition SD cards.
There's also something out there called SD formatter.
Or once you have your Nook running, you can just format it from that.
You have all been so very helpful. After watching the noob video I figured you people ate noobs for lunch.
Renate, you were right: I backed up the SD card. I hate to think of all the others who have done the same and won’t know the backup is useless until they need it. It’s an easy mistake to make but knowing an approximate file size was an excellent deterrent against disaster. Thanks for the heads up.
The rest was pure voodoo but I’m rooted. Still, there were some surprises and I have two final questions.
• Between failed rooting attempts, while in original mode, I updated the NS2 to 1.1.2. After rooting the device is using 1.1.0. Should I look for a way to root into 1.1.2 or just be content?
• Also while in original mode I wanted to change the registered gmail account for the device. I created a second B&N account using my preferred gmail, then did an “Erase and Deregister” to reregistered the device with the preferred gmail account. However, after rooting I couldn’t log into YouTube with my reregistered, preferred gmail, only the first gmail was accepted. Yet, when looking in Settings\Device Info\About Your Nook\Owner, my preferred gmail (not the first gmail) is listed. How do I get the rooted Nook to recognize my preferred gmail address in the market?
Hey Guys...
I'm about to buy a Nook. Cause I'm really in need to have a good ebook reader...
And I want to know if hacking and Android Developement for Nook simple Touch with Glow-edge (NTG) is progressed as much as Nook Simple Touch (NST)'s...
Are there any advantages for NST comparing with NTG in hacking?
For example is there any custom roms available for NST which is not available for NTG?
or, Is usb-host method working for NTG too?
I'll be Thankful if some one guides me...
Salar.m said:
Hey Guys...
I'm about to buy a Nook. Cause I'm really in need to have a good ebook reader...
And I want to know if hacking and Android Developement for Nook simple Touch with Glow-edge (NTG) is progressed as much as Nook Simple Touch (NST)'s...
Are there any advantages for NST comparing with NTG in hacking?
For example is there any custom roms available for NST which is not available for NTG?
or, Is usb-host method working for NTG too?
I'll be Thankful if some one guides me...
Click to expand...
Click to collapse
I bought the NST a few days ago. From what I can tell, pretty much the same hacking options are available for NST and NTG. For example, the custom kernel that I installed, which enables multitouch and fastmode, (see the thread by guevor) is available for both NST and NTG.
Both devices are pretty hackable.
Be very, very careful that
1) you make a full (~2 gig) backup of your device before you start;
2) you are completely comfortable with restoring that backup - test on an SD card to be sure that you can restore and wind up with 8 partitions on that card -- I've seen folks retore from a viable backup, and accidentally restore only 1 partition, and that's a problem
3) any hacks you try are for the correct device.
Most tools are device specific. The two I threw together, tinynoot and fat glowworm, actually do work on both devices (and tinynoot, with a trivial mod, works on the Nook Color as well, it's what I used to re-root after the last OTA that I was too slow to block.)
If you use an NST tool on an NSTG you will very likely need to restore to stock and start over. 8 failed boots will get you out of most jams, but when it won't, you need to be sure you can restore your disk image.
Tnx Guys...
but, would you plz link me to a step-by-step guide page...? (for backup)
,
So as you said, there will be no problems in hacking and custom mods for me if I buy a NTG... huh?
,
if I'm not wrong, NTG's NAND is partitioned to 8 different disk partitions by default... and they keep all of (roms, etc.) data which I have to make an image of it to have them all saved and backuped... Right?
,
And for the last Q.
Is a microSDHC 16GB class 2 compatible with NTG...?
,
Tnx,
Peace,...
Yes, eight partitions. Complete backup and restore instructions are in this thread. Not sure about class 2 mSD, but I expect it would be fine. The device will handle up to 32GB.
Actually, I think it's a poor idea for us to link to a specific post or posts on this topic.
Enough people have mucked up their devices by not doing their research that I would strongly recommend that you read through the threads yourself before you put your device at risk.
The device does have 8 partitions; the simplest way to get a full backup is to use linux, either as a physical machine or in vmware player (which has excellent USB support)
Terms you should be hip to before you start:
- partition
- noogie
- clockwork
- framework.jar
and of course, OS versioning, so if someone's referring to a 1.2 release you're already aware of which device that was intended for.
I apologize if I sound unhelpful, but I think what you find out on your own will always be more valuable so that when something works strangely, you know where you first read about it and can drill in for more.
the development area is definitely worth reading even if you're not developing.
the links you asked for
for NSTGL
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
The main difference, is that Nook Touch Tools is working on NST but not NSTGL
so on the NST you can map your QuickNav buttons to the app of your choice, but not in NSTGL
LK, please don't take this the wrong way, but this is why I wouldn't want to point to only a few sources:
Your post refers to the Glow.
The first link refers to both the Glow and the Touch
The second link refers only to the Glow
It's that device confusion that makes me want folks to really understand the landscape before they start into it.
Disclaimer
Before even consider reading this, know that I cannot be held responsible if following these steps will: brick your device, make your girl friend break up with you, start third world war or do any other kind of damage.
Motivation
This tutorial is intended to help people who did not make a full backup of their device and applied the Alpha-FormatTouch-2.zip to their device and as a result lost the GlowLight feature. It took me a couple of days to figure out how to revert to factory settings, and thus, I hope that I can save others time.
Preliminary
You need
Nook Simple Touch Glowlight, semibricked
SD Card
SD card reader
Downloads
Download the following files:
factory.zip - downloads[dot]nanophysics[dot]dk/nstg/factory[dot]zip (if you have a copy of your own factory.zip -- found on the partition /factory/ -- use that instead)
[ClockworkMod - downloads[dot]nanophysics[dot]dk/nstg/sd_128mb_clockwork-rc2[dot]zip
Install Clockworkmod on SD card
On Mac OS X, plug in the SD card and find the device using
Code:
$ diskutil list
I will assume that your device is /dev/disk1. Unmount the disk
Code:
sudo diskutil unmountDisk /dev/disk1
and write the ClockworkMod to it
Code:
sudo dd if=128mb_clockwork-rc2.img of=/dev/disk1
Copy the factory.zip to the disk and eject it.
On Windows you can use Win32Imager.
Install factory image
Power off your Nook and insert the SD card. Then power it up. After a while the CWM menu will appear (if you get a white screen press right-down). Select "install zip from sdcard" using the right side navigation to go up and down and u to enter. If you enter the wrong menu you can go back on right up. Now select "choose zip from sdcard" and choose factory.zip. Finally, click the option saying "yes - install factory.zip"
After a few minutes the installation is complete and if everything went ok, you should now be back to the original factory software.
Reset user settings (optional)
If you want your Nook to be completely reset, you can optionally do a reset of your settings. Power off you Nook. Power it up again and hold left and right down simultaneously for around 30 s. Answer yes twice. After a while your Nook has been reset.
Backup
Finally, it is time to do what you should have done in the first place (and probably also the reason why you are following this tutorial): Make a full backup of your Nooks internal SD card. See blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch for more information.
Thanks for the tutorial. However i just had a few queries.
1. My NSTG is rooted and functioning normally. Only glowlight does not work. Does your tutorial apply to such a device too.
2. How can i take backups of my current /rom and /factory partitions so that i can restore them in case of any eventuality.
Thanks a bunch in advance.
i just erase every thing . now my nook is completely messed up.
I can't find your factory.zip would you mind resend it please ?
shank21101985 said:
Thanks for the tutorial. However i just had a few queries.
1. My NSTG is rooted and functioning normally. Only glowlight does not work. Does your tutorial apply to such a device too.
2. How can i take backups of my current /rom and /factory partitions so that i can restore them in case of any eventuality.
Thanks a bunch in advance.
Click to expand...
Click to collapse
If your NSTG is rooted, this may remove rooting - at least I think, I did not try. However, you can always reroot.
Regarding backup, I would make a full image backup before starting. If you have a Windows box, follow the instruction on blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch and make a full backup of your system.
I have only done backup of individual partitions on Linux: Boot the device with noogie.img and plug it in. On Ubuntu,t 6-8 partitions should immediately appear.
jjinkou2 said:
i just erase every thing . now my nook is completely messed up.
I can't find your factory.zip would you mind resend it please ?
Click to expand...
Click to collapse
There was missing a slash in the URL. It has been fixed.
Are you able to register a device reimaged using this factory.zip to your BN account?
If not, it's a bit of a pain for folks.
I have a disk image made via
dd if=/dev/block/mmcblk0p1 of=/part1.img bs=1M
This contains teh whole of a US NSTG's first partition; restoring it using
dd if=part1.img of=/dev/block/mmcblk0p1 bs=1M
allows me to boot my device, and the glow still works.
This seems to be more likely to restore the glow function yet preserve the ability to register with BN - the factory.zip method is not generic, as far as I know, it will restore some other person's NST serial number, mac address and other identifiers to your device, won't it?
If someone will PM me, I'll send a zipped copy of my .img file to them and let them try using it to recover glow function and their own registration in a nook glow. If that works, it can be posted more widely.
roustabout said:
This seems to be more likely to restore the glow function yet preserve the ability to register with BN - the factory.zip method is not generic, as far as I know, it will restore some other person's NST serial number, mac address and other identifiers to your device, won't it?
If someone will PM me, I'll send a zipped copy of my .img file to them and let them try using it to recover glow function and their own registration in a nook glow. If that works, it can be posted more widely.
Click to expand...
Click to collapse
Remark that I recommend that people use their own factory.zip image. Nevertheless, all these data you mention are stored on the rom partition. To my awareness this partition is only overwritten if one applies rombackup.zip, but not by factory.zip. Thus, your B&N shop should be fully functional afterwards. I did apply someone elses factory.zip first, and I had no problems registering my device. However, if anyone would experience such an issue, please drop a line in this thread.
In any case, you should always do a full system image before following tutorials like this one, or for that matter, before apply someone elses partition images to your own device.
roustabout said:
Are you able to register a device reimaged using this factory.zip to your BN account?
If not, it's a bit of a pain for folks.
I have a disk image made via
dd if=/dev/block/mmcblk0p1 of=/part1.img bs=1M
This contains teh whole of a US NSTG's first partition; restoring it using
dd if=part1.img of=/dev/block/mmcblk0p1 bs=1M
allows me to boot my device, and the glow still works.
Click to expand...
Click to collapse
Judging from your other post (http://forum.xda-developers.com/showthread.php?t=1836188&page=4), the partition you have made a copy of, is the boot partition? If glow was already working, it will still work after overwriting the boot image.
However, if it was not working already, it is very unlikely that installing a new boot image will resolve the issue described here, since it is a consequence having downgraded the OS.
I had not understood that the device you're targeting with this thread is an NSTG running 100% noo simple touch software - the thread refers to a problem with the alpha touch formatter, but I had not realized that was the outcome of the tool.
I've seen a few people describe their NSTGs as "fine, but not glowing any more" and had not seen those folks explain that they were running NST software on the NSTG.
For those folks, I had thought copying in the boot environment and kernel would be helpful. My understanding was that the kernel in the NSTG at software 1.1.5 was different than the NST kernel; I was thinking that getting the kernel and other boot hooks ready was what was really missing.
Fortunately, there's now a 1.2.0 updater out, and I suspect that soon there will be a CWM installable 1.2.0 update which will be super helpful. (Though folks will still need a partition table - I think that would be another use of writing in a viable first partition followed by a restart, to get the partition table straightened out before proceeding.)
roustabout said:
I had not understood that the device you're targeting with this thread is an NSTG running 100% noo simple touch software - the thread refers to a problem with the alpha touch formatter, but I had not realized that was the outcome of the tool.
I've seen a few people describe their NSTGs as "fine, but not glowing any more" and had not seen those folks explain that they were running NST software on the NSTG.
For those folks, I had thought copying in the boot environment and kernel would be helpful. My understanding was that the kernel in the NSTG at software 1.1.5 was different than the NST kernel; I was thinking that getting the kernel and other boot hooks ready was what was really missing.
Fortunately, there's now a 1.2.0 updater out, and I suspect that soon there will be a CWM installable 1.2.0 update which will be super helpful. (Though folks will still need a partition table - I think that would be another use of writing in a viable first partition followed by a restart, to get the partition table straightened out before proceeding.)
Click to expand...
Click to collapse
Ok. No this thread is not intended for people who have destroyed partition tables etc., but only for people who have downgraded their software by using NST recovering guides on their NSTG device. I found it relevant to explain how this is done, since many people complain that their NSTG works, except that glow light no longer works. If they look into the software version they find something below 1.1.5, like 1.1 which was my case. I could not find a guide which explained me what to do after screwing up the software, hence this guide.
Partition tables and "accidently formatting" is a completely other issue. In the end, here the main problem is that people do not make a backup as they assume that everything is going to be fine. I assumed that myself. However, at some point I will have a look at the rom partition, because I think it is quite limited amount of information you find their. It should be possible to restore your Nooks serial number -- it is written on the package of the Nook -- after applying another Nooks image. I just received my second Nook so I am going to try this at some point.
Thank you so much for sharing the solution.. finally my glowlight works now !!
shank21101985 said:
Thank you so much for sharing the solution.. finally my glowlight works now !!
Click to expand...
Click to collapse
Hic, I cannot download the image file, my backup file was deleted, anyone can upload that image for me?
Thanks so much:crying:
factory.zip
I know it's a long shot, but if anyone has a copy of the factory.zip from a glowlight I'd really appreciate it. I've installed a non-glowlight one for now, but would really love my backlight back!
Cheers!
john2k10 said:
I know it's a long shot, but if anyone has a copy of the factory.zip from a glowlight I'd really appreciate it. I've installed a non-glowlight one for now, but would really love my backlight back!
Cheers!
Click to expand...
Click to collapse
So did you actually replace the factory.zip with one for the NST or did you just run a restore from, say, NookManager? I'm not too sure about this, but I think it's kind of difficult to wipe the factory.zip. Anyway, since I'm not familiar with the NTG, and you seem to have done something that others have also done before, have a look at this old thread and see if it gets you anywhere:
http://forum.xda-developers.com/showthread.php?t=1936458
john2k10 said:
I know it's a long shot, but if anyone has a copy of the factory.zip from a glowlight I'd really appreciate it. I've installed a non-glowlight one for now, but would really love my backlight back!
Cheers!
Click to expand...
Click to collapse
Mmm......have a look at this:
http://waveswirl.blogspot.com/2013/01/xda-developers-tutorial-how-to.html
nmyshkin said:
Mmm......have a look at this:
http://waveswirl.blogspot.com/2013/01/xda-developers-tutorial-how-to.html
Click to expand...
Click to collapse
Its dead I need a glowlight factory image
can someone please re-upload the glowlight factory image please.... Thank you in advance
Hello all ...
Please .. I need some advice..
This is my first post. My sister has given me her Nook Simple Touch Glowlight. I would like to root it, as I've been looking for a device to keep notes and stuff on. I went as far as booting up with noogie.img and backing up the firmware. I don't know what to do, because I read that having a certain firmware changes everything? I don't think my sister updated the nook. Here is the information from the Settings / Device Info / About Your Nook.
Software Version: 1. 1. 5
Model Number: BNRV350
I read someplace that the sizes of the firmwares are different. The simple touch is 1. 82 and the simple touch glow is 1. 86.
Mine is 1 .82, but yet it has the glowlight? It says to hold the button down for two seconds to turn it on.
I see that B&N have new firmware for the nst & nstg. 1. 3 I believe. It said on the site that this firmware would be installed when the nook is idle. (via wifi) Anyway, I'm wondering if it would be ok to go ahead and root the thing, or upgrade the firmware first to maybe - 1. 2 (if I can find it?) before I do anything else? Oh and should I stay away from B&N's new 1. 3 firmware?
Thank You Very Much !!
WillyS.......
If you indeed have the Nook Simple Touch with Glowlight (black bezel), then the most recent stock firmware is 1.2.1 which can be downloaded here. I would recommend that you update to this as the first thing you do. Next you need to decide which of the multitude of rooting methods is best for you. You need to take into account what you wish to achieve by rooting the Nook and your skill/comfort level with the processes. I have followed many of the different processes, doing a factory reset between root versions. By far the easiest is Nook Manager. I, personally, prefer the Minimal rooting - back to basics method because it allows you to install just what YOU want. However, this method requires a fair amount of command line work.
EDIT: I made the assumption that you are in the US and have a US model. I believe there is a different firmware number for the international model. In any case, you should update the Nook to the most recent firmware before rooting.
Rooting nook .. Glowlight ..
Hello David and Thank You kindly for the reply!
Yes, mine is a Canadian version and it has the black bezel.
Thank you .. for correcting me on the firmware. I was looking at the wrong Nook version. (nook.barnesandnoble.com/u/software-updates-nook-glowlight/379004086)
I downloaded the correct 1. 2. firmware for the nook and I (like you) would rather install what I want to and have more control over what gets put on it. After I update the firmware, I'll come back and follow the links you provided. If you know what threads have the latest / newest info on rooting the nstg, can you please point me to it? (If you haven't already) Thank You Very Much for your help .. David.
Cheers
WS
You're welcome. If you are comfortable with a lot of manual, command line manipulation, start with the Minimal rooting - back to basics thread. There are many more and newer rooting methods, but each of them installs a bunch of apps that the creators use, which may or may not be of importance to you. If you start with the Minimal rooting - back to basics, you can then pick and choose the apps and modifications you want to apply to give you the best experience for YOUR needs. I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.
Rooting Nook STG .. Firmware 1. 2 ...
Hi David and Thank You for the reference document.
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
I'm at the rooting - back to basics thread. I'm going to read all this stuff over and see if I can figure it all out. Thanks again for your help and the document.
WS...
WillySizard said:
...
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
...
Click to expand...
Click to collapse
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.
Don't really know where to go from here, or what to do ..
@ digixmax .. Thank You for the info on the SD-card. Good to know info!
@ david0226 .. I went to the page about rooting via the link and I have basic
understanding how / what needs to be done, but I'm not having much
luck finding and using the tools. I went and looked for the file used to
extract the 2 files from uRamdisk, but I couldn't find it. I did some reading
and looking around and found a program called Preboot (I think) by
Intel and it contained bootutil 32/64 and so on. I had to install preboot & then
uninstall it, to get bootutil and then install it. I tried using it to extract
the files, but I kept getting failed messages. Like invalid switch /x.
Invalid switch /v. Invalid file uRamdisk. I know I need to extract out 2
files: init.rc and default.prop. I tried to do so in the "Administrative Command
Window" on Win7_64bit, but it just wouldn't work with bootutil. Not the
one I had anyway. Any ideas? Thanks!
WillyS......
David0226 said:
...
I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.
Click to expand...
Click to collapse
What extensions does "Extended Power Menu" provide?
Also, which uImage and uRamdisk do you use as uRecImg and uRecRAM?
TIA.
Here are the links to the relevant threads.
Extended Power Menu
Clockworkmod based Recovery post #75, see the entire thread here.
If you are going to do the Extended Power Menu, be sure to do the Clockworkmod based Recovery also or you risk wiping out everything you have done by accidentally hitting recovery in the Extended Power Menu. I you have installed Clockworkmod Recovery and accidentally hit "Recovery", it will just boot to Clockworkmod and give you a chance to back out.
@willys. I will have to look up the software I use and post tomorrow. Sorry I missed your question earlier.
@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.
David0226 said:
@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.
Click to expand...
Click to collapse
Yes, I had to go to her profile and I found it there. I'll do this part first and see how it goes. After that (I think?) I need to get an android program (some kind of Installer maybe?) to do some other work with. Anyway, one step at a time. All for now. Thanks! ... WS.
digixmax said:
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.
Click to expand...
Click to collapse
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.
Almost done, but need a little more help . . .
Mnurlan said:
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.
Click to expand...
Click to collapse
OK .. Thank You Mnurlan!
@David0226 ...
Just getting to the point where I'm ready to add programs. have edited uRamdisk and re-installed the two files. I've download android-sdk package and have installed it. I have been in the nook via wifi using ndb shell as root. I am now following your notes file. I've created the archive folder on the nook - /system/archive and I've been moving files over from /system/apps folder. I got Nook Manager written to the sd-card and I have PackageInstaller.adk from it, but I I'm not sure how I get that onto the nook. When I boot with NookManager, it ask if I want to root. I have already done that and it is working. Should I let it do it anyway?
Thank You!
WillySizard . . . .
@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}
Nook Simple Touch Glowlight .. Need advice before rooting ..
David0226 said:
@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}
Click to expand...
Click to collapse
Ahhh .. ok. Good enough then. That should get me off and running.
Thank You .. David. Sorry I'm being such a pest.
Me, also
Just paid $5 for a BNRV350 at a rummage sale.
I understand BN disabled the web browser with the current operating system.
I can get a Google search window (by repeated tapping on the "Google" or maybe the "404" or the "that's all" links that appear when I try the "connect to social" settings menu choice for Google. And "find my account" worked when given the Gmail userid (because the keypad on the Nook lacks a period for typing a proper email address, in this view).
And I can get a Twitter login page. Neither works well -- typing even a single letter into the password field resets the page, so it's letter, then tap in the field window, then another letter, then tap in the field window. Sometimes it shows a row of dots for characters already entered, other times those are invisible but the entries are still there.
Just curious to add to the above fellow's thread for anyone searching for this Nook model number, if anyone has advice or suggestions about making it useful.
Reverting to the original OS to have use of the web browser would be a welcome option, if that's possible. Pointers welcome. Right now this Nook has version 1.1.5 installed -- I gather that's one of the improved versions that killed the stock web browser.
I bought a used nst glowlight (bnrv350), I made a backup, and then I tried to root using glownooter, but had a limited success : I could not install google market or opera mobile.
So I tried to restore the backup, but after "read forever, your nook is starting up", nothing happens, the message just stays there. I can boot with the back button, but it does the same.
I then tried to restore the factory image several times, using all the methods I could find in the internet, but it does the same as above. It has been going on for 24 hours.
The problem might have originated when I could not use winimage in my windows 10 computer to make the backup, and I used windows xp in a virtualbox in my linux computer instead. I used also dd, but I am afraid I don't remember the exact order. The backup size is 426.8 MB.
I reverted back to windows 10 with win32diskimager, with the same result.
Can anything be done ?
sinlog said:
I bought a used nst glowlight (bnrv350), I made a backup, and then I tried to root using glownooter, but had a limited success : I could not install google market or opera mobile.
So I tried to restore the backup, but after "read forever, your nook is starting up", nothing happens, the message just stays there. I can boot with the back button, but it does the same.
I then tried to restore the factory image several times, using all the methods I could find in the internet, but it does the same as above. It has been going on for 24 hours.
The problem might have originated when I could not use winimage in my windows 10 computer to make the backup, and I used windows xp in a virtualbox in my linux computer instead. I used also dd, but I am afraid I don't remember the exact order. The backup size is 426.8 MB.
I reverted back to windows 10 with win32diskimager, with the same result.
Can anything be done ?
Click to expand...
Click to collapse
That backup is too large, I think. Should be more in the neighborhood of 250 MB? Have you tried the factory re-image where you just see the booting up screen and then hold down the two bottom hardware buttons until you get a prompt?
It's difficult--but not impossible--to damage the factory image unless you've been messing with the partitions. If that method does not get you there, consider making a NookManager card and trying to access the re-image routine from its menu.
Thank you for your reply. I just used nookManager. After 5 seconds, it said the backup was successful, but there was no backup in the card. Similarly, it said that rooting was successful, but when I removed the card, it did the same as before : "starting up..." and it stays there.
Do you have another idea ? I downloaded the 1.2.2 update from the b&n site. Can nookManager install it ?
PS: The nook was already 1.2.2
Yes, I used the two lower buttons trick.
sinlog said:
Thank you for your reply. I just used nookManager. After 5 seconds, it said the backup was successful, but there was no backup in the card. Similarly, it said that rooting was successful, but when I removed the card, it did the same as before : "starting up..." and it stays there.
Do you have another idea ? I downloaded the 1.2.2 update from the b&n site. Can nookManager install it ?
PS: The nook was already 1.2.2
Yes, I used the two lower buttons trick.
Click to expand...
Click to collapse
5 seconds is not enough time for NookManager to correctly make a backup. And, backups can only be seen on the card if you connect your NSTG to your PC while NookManager is running. Otherwise the partition is invisible.
It's hard to know since I have no experience with the NSTG. If it were an NST I would suggest that you perform the region change flash, but it's not clear if that will remove your light function or, indeed, if the flash is deep enough to rewrite the areas of your device that appear to be preventing boot. AFAIK there are no ROM images for the NSTG available. But there might be. Somewhere.
I guess if you have exhausted all the possibilities, rather than trashing the device I would try the region change (just flash the US firmware again--I assume that's what's on there already). It may or may not preserve the glowlight capability, but it might at least produce a functioning e-reader. But only as a last resort.
Edit: Hmm.... seems like I've been down this winding road before: https://forum.xda-developers.com/showpost.php?p=72551413&postcount=57
But I emphasize that this process worked for a plain NST, not the NSTG, so it is an absolute last resort (and might not work anyway because you could have a completely different situation). Next thing is to look at the innards of the 1.1 updater and see if Glowlight updates could be substituted...
O.K. So here is a thread that contains a link to an NSTG image and the instructions to write to your device (read down in the thread).
https://forum.xda-developers.com/showthread.php?t=2608815
What "may" happen: your device could end up with a mismatched serial number and or MAC address depending on how this image was made. There is information on this forum for correcting the MAC address. Just a disclaimer. I don't know. IF this is successful, you can then do a manual update to 1.2.2 and then root with the updated NookManager. I've checked the link to the image and it is still good. I got a file that is about 245 MB--seems about right. Presumably you use the image in place of your backup in the restoring process described in the thread.
I am very grateful for your help, but I am afraid I need more. The nook is now functioning and I might not have done it without your hints. As you suspected, the serial number and mac address have changed (I wrote them down before all this). I suppose that's why it did not automatically upgrade to 1.2.2 . Also the device says it's connected to the internet, but it doesn't seem to be.
I searched xda (nstg mac address, nstg serial number), but I didn't find anything meaningful to me (there are posts by Renate and by ros87 but too complex). Can you help, please ?
sinlog said:
I am very grateful for your help, but I am afraid I need more. The nook is now functioning and I might not have done it without your hints. As you suspected, the serial number and mac address have changed (I wrote them down before all this). I suppose that's why it did not automatically upgrade to 1.2.2 . Also the device says it's connected to the internet, but it doesn't seem to be.
I searched xda (nstg mac address, nstg serial number), but I didn't find anything meaningful to me (there are posts by Renate and by ros87 but too complex). Can you help, please ?
Click to expand...
Click to collapse
Oy.
I didn't think you would act so rashly with all my disclaimers. Well, it's done. I actually don't think the MAC address is a big deal unless you begin to have issues.
Did you actually manage to register? If so then the serial number must not currently be in use and the change you effected was deep enough to pass muster. If not....well battery life is said to be shorter for devices that have skipped registration.
Correcting the MAC address is described (sort of) here: https://forum.xda-developers.com/showthread.php?t=1483600
As far as I can guess it involves editing a hex file. Doable, but maybe not needed. There is no way to correct the serial number. It is heavily encrypted with private keys. Again, if you managed to register then this is all moot.
How are you judging lack of internet connectivity?
I was not given the opportunity to register and I don't care about registration, but I'd like to have connectivity. The link you just gave me is for the ros87's thread that I mentioned, and I don't know how to use it. So I suppose I cannot upgrade to 1.2.2 . Should I root the device ?
PS : ros87's last activity was 2 years ago
EDIT : I copied nook_1_2_update.zip in the device and it was installed. I have now 1.2.2
sinlog said:
I was not given the opportunity to register and I don't care about registration, but I'd like to have connectivity. The link you just gave me is for the ros87's thread that I mentioned, and I don't know how to use it. So I suppose I cannot upgrade to 1.2.2 . Should I root the device ?
PS : ros87's last activity was 2 years ago
EDIT : I copied nook_1_2_update.zip in the device and it was installed. I have now 1.2.2
Click to expand...
Click to collapse
You didn't answer my question about connectivity. Are you not able to make a connection? With only the stock device there is nothing to connect to other than B&N. What does it say about "Owner" in the Settings?
Yes, you should root. Be sure to use the NookManager update or it won't work.
Before we even think about the MAC address issue you need root access and some way to tell if you actually have an internet connection. That means some kind of functioning browser, etc.
Do you still have that weird backup? If so, keep it safe somewhere. You may want that someday.
I tried to download a book and I got this : Unable to download, Internal error...
I can ping the nook from the computer.
I will look into rooting the device in 2 or 3 hours and then post again. I suppose this is what you're referring to :
https://forum.xda-developers.com/nook-touch/development/nst-g-updating-nookmanager-t3873048
Thank you for your patience with me.
sinlog said:
I tried to download a book and I got this : Unable to download, Internal error...
Click to expand...
Click to collapse
There is an entire galaxy of mystery contained in that statement. Download from where? Download with what? Do you have an sdcard inserted for storage?
nmyshkin said:
There is an entire galaxy of mystery contained in that statement. Download from where? Download with what? Do you have an sdcard inserted for storage?
Click to expand...
Click to collapse
I meant to download a book from the home page of the nook, where it says New reads. I am still unrooted and I don't leave an sdcard inserted.
sinlog said:
I meant to download a book from the home page of the nook, where it says New reads. I am still unrooted and I don't leave an sdcard inserted.
Click to expand...
Click to collapse
Hmm... I'm surprised there are any books populating that section at all since the device is not registered. In any case, that is no test of connectivity since without registration the NSTG will spit out all kinds of generic messages about connections and failures if you attempt anything that requires access of B&N servers--like buying/downloading a book (which you can't do unless you are registered).
Rooted with nookManager updated. Opera mobile needs to be reinstalled. I can connect to the computer using es file explorer, so wifi is ok. BUT I can't use nookManager because I can't read the icon labels. I'll restore the backup tomorrow and I will try another rooting method. There are 2 more, I think : tiny and glownooter. Are there others ?
sinlog said:
BUT I can't use nookManager because I can't read the icon labels.
Click to expand...
Click to collapse
? Do you mean ADW Launcher? You can fix the icon label issue in the Settings. As I recall the default font color is white. That needs to be changed to black. The size can also be changed. Depending on what icon style you pick the label will either be on one line or, if longer, on two. LOTS of Settings in ADW. Don't write it off without spending some time working with it.
Sorry, I used glownooter. It's a lot like touchnooter, with which I am familiar. I still have to sign in to my google account and to install opera mobile. I'll be back when finished.
Opera mobile is installed and working. I still can't sign in to google but I can use yalp store and that's good. Thanks again, nmyshkin, you saved my nook glowlight.