Database Users

[Q] Rooting newer Nook version: how to know which software?

I have a Nook Simple Touch Glowlight with software verion 1.1.5. All the information that I've been able to Google is for 1.1.2, in fact that is the version that I still see on the B&N website.
I _think_ that I have found a suitable way to root the device with Nooter but I would like to know how to confirm that in fact this is the right project for my software version. I'm sorry that I cannot post a link to the Nooter project, but I have less than 10 posts.
Thanks.

There are at least two methods that work with the Glowworm.
You should not use any method until after you have
- made a noogie disk
- booted from it
- backed up your device
- restored that backup to a test disk (a 2 gig or larger microSD card, for instance) and confirmed that the test results in a disk that has 8 partitions.
Many people have made the backup but not tested it; when they tried to restore, they did bad to fatal things to their devices. A very common failure on restore seems to be only getting one partition restored and blowing out the other partitions.
I don't know if the stuff that eded is working on has come to fruition yet - he was looking at building a tool that could detect whether it was run on an NST or NSTG and root appropriately to the device.
The two routes I know work are:
- glownooter, the nooter project tool, includes Google apps and market support
- tinynoot, pasted together from various tools, gives you minimal root without google apps and with amazon appstore. Will work with either NST or NSTG because it's approach is so minimalist.

Thanks, roustabout! I will be sure to test the backups before I install anything else, then. Good to know!
In any case, what I am most concerned about is getting the right version of the rooting software for my device. I see that Nook devices have different firmware and that certain tools only work with certain firmware versions. I see no mention of my firmware version in any tools' websites, hence my apprehension.

hence the value of a backup
I saw your request on that and I think one of the issues here is that so many folks use Windows exclusively, and the backup process is so easy on linux that trying to tell people how to do it in Windows is like jabbing yourself in the eye with a stick, given that linux is free, vmware player is free, and linux can be installed and used for this job entirely in vmware player. On the other side of the coin, if you know nothing of linux, even using dd correctly will be a challenge since there's a pretty steep learning curve behind setting up a new OS successfully just to be able to get backups off an 80-130 dollar device.
In your case: as of now, there is only one firmware release for the glowlight. This is why the folks with the tools aren't mentioning it, aside from 'this is for a glowlight.'

I didn't mention it, but I also use Linux at home (Kubuntu, like Ubuntu but with a better UI). So many people are now using Ubuntu that I find it surprising that the instructions even bother mentioning the OSes for which the operation is as difficult as you say. I remember when doing things in Linux was hard and Windows was easy, and at that time Linux was hardly ever mentioned!
In your case: as of now, there is only one firmware release for the glowlight. This is why the folks with the tools aren't mentioning it, aside from 'this is for a glowlight.'
Click to expand...
Click to collapse
I did not realize that the 1.1.5 release is glowlight-only. Great, thanks, I'm on to hacking this thing!

ok, so for you the backup process is:
- make the noogie disk
- put it into your device
- power cycle your device
- when it boots to "rooted forever," connect the USB cable to your linux box
- once the linux box mounts the NSTG as storage, pay attention to which device it is mounting it at. Assuming it's sdX:
- backup with dd if=/dev/sdX of=backup.img bs=1M
When that's done, disconnect your NSTG, throw media of some sort, larger than 2G, onto your box and test your restore with
dd if=backup.img of=/dev/sdY bs=1M
Once that's done, do an
fdisk /dev/sdY
and a
p to print the partition table.
You should have 8 partitions (and your backup.img file should be just under 2 gig.)
Hack away; if you ever need to restore, you can just drop the virgin image back on.
I take a snapshot like this of my device every so often since remembering how I got to whatever config I liked is harder than just backing it up.

Thanks for the backup instructions, the idea of testing it on a DVD-ROM looks to save quite a bit of trouble with the actual device..
I rooted with this terrific guide:
http://forum.xda-developers.com/showthread.php?t=1675706
The process was simple. I do have an issue where I need to install a Hebrew font but ES File Manager doesn't seem to see the root folders. I'm having a hard time googling my way out of this one, bu all the other little issues were fairly simple.
One issue that I will mention that was hard to solve was the inability to perform searches in the Market. This page helped me resolve that issue:
blog.the-ebook-reader . com/2011/07/15/rooted-nook-touch-fixing-market-search-and-other-tips-and-tricks-video/

I just figured out that the file manager has to have Root permissions enabled. I've enabled it and added some fonts to /system/fonts but I still cannot get Hebrew text to display on this device. All I get are the typical rectangles instead of characters. Any ideas about how to proceed?
Thanks.

Restore Nook 1.1.2
roustabout said:
Many people have made the backup but not tested it; when they tried to restore, they did bad to fatal things to their devices. A very common failure on restore .
Click to expand...
Click to collapse
1. I made this exact same mistake yesterday and I ended up with a bad backup.
2. My Nook Simple Touch (1.1.2) is now not working because I wiped ALL the partitions before attempted to restore the backup (which I didnt know was bad at the time)
3. Please help me restore the Nook back to factory or any working state. Are there any restorable backup images that can be downloaded online?
p.s. I have tried touchnooter and installed touchformatv2 but all I get now is a Read Forever load screen.
Please Please Help Me Im so sad (I know this is down to carelessness on my part but I really need help)

bubblewrapper said:
1. I made this exact same mistake yesterday and I ended up with a bad backup.
2. My Nook Simple Touch (1.1.2) is now not working because I wiped ALL the partitions before attempted to restore the backup (which I didnt know was bad at the time)
3. Please help me restore the Nook back to factory or any working state. Are there any restorable backup images that can be downloaded online?
p.s. I have tried touchnooter and installed touchformatv2 but all I get now is a Read Forever load screen.
Please Please Help Me Im so sad (I know this is down to carelessness on my part but I really need help)
Click to expand...
Click to collapse
Few people who will be knowledgeable will find your post buried here under this thread. i suggest that you simply start a new thread with a good descriptive title so that the gurus will find it.

Not sure how to get hebrew working. One assumes that in addition to the characters, you need it to right to left? If it's the latter, I know there was a thread discussing doing this with Arabic, and I'm not sure how that turned out. You can also google around for folks looking at this on, I think, mobilereads.

roustabout said:
Not sure how to get hebrew working. One assumes that in addition to the characters, you need it to right to left? If it's the latter, I know there was a thread discussing doing this with Arabic, and I'm not sure how that turned out. You can also google around for folks looking at this on, I think, mobilereads.
Click to expand...
Click to collapse
Actually, I think that I just need the fonts (or at least that would be a great first step). I put fonts with Hebrew glyphs in /system/fonts (using ES File Explorer in Root mode) but even after a restart it does not find the fonts (i.e. Hebrew text still shows as rectangles). I will fight with it some more in the coming days, if I don't succeed I will start a new, concise thread on the topic. There are plenty of Google posts on the subject, but all of the ones that I have seen (not Nook-specific) suggest that dropping the fonts is /system/fonts should be enough. Perhaps it is a permissions issue, I'll see if I can SSH into the device to see permissions.

dotancohen said:
I have a Nook Simple Touch Glowlight with software verion 1.1.5. All the information that I've been able to Google is for 1.1.2, in fact that is the version that I still see on the B&N website.
I _think_ that I have found a suitable way to root the device with Nooter but I would like to know how to confirm that in fact this is the right project for my software version. I'm sorry that I cannot post a link to the Nooter project, but I have less than 10 posts.
Thanks.
Click to expand...
Click to collapse
Sorry that I am so slow to respond, but I think this is the information you need to root a Nook with Glow on version 1.1.5
It uses Glownooter
http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
and this is the backup routine
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/

ladykayaker said:
Sorry that I am so slow to respond,
Click to expand...
Click to collapse
Thank you! You don't need to apologize for taking time to respond, you are under no obligation! But I very much do appreciate your assistance and am happy to wait patiently! You will notice that I usually google issues first to try to save us both the time!
I think this is the information you need to root a Nook with Glow on version 1.1.5
It uses Glownooter
http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
and this is the backup routine
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
Click to expand...
Click to collapse
Thank you. It seems that those posts are Windows-centric summerizations of information found here at XDA-developers. The root is pretty much the process that I used, but from the guide right here which has Linux directions as well.
By the way, the-ebook-reader site is often not responding for me. Is it just for me, or does everyone have trouble with that site?
Thanks!

version 1.2.0
UK glowlight ships with 1.2.0. Use tinynooter to root this. You may have issues installing apps atm though but you will get the browser at least.
http://forum.xda-developers.com/showthread.php?t=1961835

Thanks, Loney. In fact, I got this Glowlight in the US, and it reports that it has software verion 1.1.5. But the information will be good for others who might google this thread!

Cloned Nooks (I'm a dummie)

Hey everyone,
I rooted my NST Glow for the first time about a month ago and I was an idiot and didn't take a back up first. In the process I managed to totally mess it up. It got so bad that it was bricked and wouldn't boot no matter what I tried. Eventually I decided to try taking a backup of my wife's NST with glow and restored that to my Nook. That worked and allowed me to do a wipe, then root it properly etc. So everything was working and seemed good to go.
Today I was rooting my wife's nook and in the process put it online. At some point it said that there was an authentication error and it rebooted the nook and wiped it to factory.
I restored her nook from the fresh backup I took and it is back up and running, however it is unrooted and offline. My guess is that I cloned her nook's ID to mine when I restored from her backup and now B&N thinks that our nooks are the same device and registered to two different accounts. Thus anytime hers gets online it will get wiped.
Is there any way to reset my Nook's device ID or w/e so that it is unique again? How do I fix this problem?
And yes I learned my lesson and take backups regularly now.

unfortunately mate , we dont have any method to recover thr Rom partition that have ur unique files like nooks ID and MAc address and serial and etc , so i think if u dont have any chance to find an backup for ur device , then noway mate
but , u can use one device for online purpose and other offline always and for ever until u got recover ur original Rom partition
sry for ur loss mate , but try to remember that u take backup or anything or ur nook just will be used offline only
good luck

speedman2202 said:
unfortunately mate , we dont have any method to recover thr Rom partition that have ur unique files like nooks ID and MAc address and serial and etc , so i think if u dont have any chance to find an backup for ur device , then noway mate
but , u can use one device for online purpose and other offline always and for ever until u got recover ur original Rom partition
sry for ur loss mate , but try to remember that u take backup or anything or ur nook just will be used offline only
good luck
Click to expand...
Click to collapse
You could always try using Noogie to get at the rom partition - the S/N and MAC address are just text files
down in the devconf subdirectory on the rom partition. Nothing special, except no line termination.
If I were doing this from linux/Ubunto, I would try something like this after booting Noogie and attaching the
nook to my laptop, and assuming that Ubuntu mounted the Noogie-presented rom partition as /media/ROM:
echo -n "XXXXXXXXX" > /media/ROM/devconf/SerialNumber
echo -n "XXXXXXXXX" > /media/ROM/devconf/DeviceID
echo -n "58611Axxxxxx" > /media/ROM/devconf/MACAddress
If you log into your account on www.bn.com, go to manage your Nook, and put the pointer over the nook in
question, it will show you the S/N registered to that particular device associated with your account.
Of course, you say that you re-registered the nook, but if you're lucky, it will show up as a different device
under the management window(since it probably presented a different S/N from the original). Just ignore
the device with the S/N that matches what's in your cloned ROM(that S/N belongs to your wife). Hopefully
the original is still showing up as another Nook, which will have your original S/N. Put that into the
SerialNumber and DeviceID files.
As far as the MAC address, other than the 58611A prefix, which you need to leave the same(it's the manufacturer
code), pick a different series of six hexadecimal digits that are different from what you already have.
The MAC address only needs to be different from any other device attached to the same WiFi router.
If you pick something at random, you know it'll be different from your wifes Nook, and you've got a good
chance that you won't match anybody else that you're sharing a Wifi router with(at home, or the BN store, etc).
They must be 6 hexadecimal digits, and I would keep any alpha characters uppercase. Or you could just
pick 010101
What do you have to lose? I'm just guessing that this will work, but at this point what other options do you
have?
PS: If you do try this, please keep us updated.

Sure you can fix the serial number and mac address but you can't recover the public key and private key hash you need to authenticate with B & N. Fixing the serial number and mac address will keep you from messing up your wife's B&N authentication and allow you both to be on the same WiFi access point at the same time. But its unlikely you'll get B&N Authentication to work with the native NST apps. But you might be able to install the Nook app from the Market and use that to read your B&N books.

straygecko said:
Sure you can fix the serial number and mac address but you can't recover the public key and private key hash you need to authenticate with B & N. Fixing the serial number and mac address will keep you from messing up your wife's B&N authentication and allow you both to be on the same WiFi access point at the same time. But its unlikely you'll get B&N Authentication to work with the native NST apps. But you might be able to install the Nook app from the Market and use that to read your B&N books.
Click to expand...
Click to collapse
So this has already been tried, and it's known that the public/private key is used
to identify the specific Nook(not simply used for comm encryption to the BN server)?
If it were being used to identify the Nook shouldn't there have to be a full private key
half, as opposed to simply the hash? The only full "piece" of a key that I see is
the public half of the key, which you wouldn't normally use to specifically identify a
device.
Even then, even if it's a device identifier rather than a pre-loaded SSL or comm pubkey
for connecting securely to the Nook server(s), do we know that B&N has matched that
key to the device S/N, and keeps that matchup in a DB somewhere?
If not, then it should be possible to create a new key. You may lose the original registration
info, but re-registering should be possible.
Has anybody actually tried this yet?
...
Hmm, I just diff'ed the Pubkey in the rom backups for my NST and NST Glow, and
they're different, which doesn't make sense if it's an SSL/Comm pubkey being
used to connect to the same B&N server(s).

Thanks for the responses guys. It looks like I have made an erroneous assumption. I stumbled across this thread which says that the Nook Color Tools causes the factory reset, and that is exactly what I was doing when her nook reset on me.
I assumed that it was because I put the nook online for the first time since restoring mine with her image and B&N detected that they had the same ID or something.
When I get a chance this week I will check the serials and stuff in the ROM partition on both the nooks and see if they are the same or if mine is still unique from hers. The B&N website is only showing one nook under my account but says it was registered Sept 2, 2012 (long before I rooted it) and it lists a serial number there, so I am hopeful that my nook is still unique, and if not I may play with it and see if I can return it to the original serial. If I lose the ability to sync to B&N that isn't a big deal since I only have one book on my account (I sideload all my books through Calibre).
I'll let y'all know what I find out.

Here's a Nook Tablet users experience with restoring the serial number and mac address. Bottom line is he couldn't authenticate with B&N after restoring the serial and mac. He ended up lucky and got B&N to replace it under warranty.

serial number can found in the NST original Box , or u can found it when u look in memory card slot
for Mac address , i dont know how , but u can use cheat one , for how to edit , add this info to Rom partition , i dont know
good luck

You can follow that: http://forum.xda-developers.com/showthread.php?t=2104145
I faced a same situation and now my nook become normal :victory:

thanmeo78 said:
You can follow that: http://forum.xda-developers.com/showthread.php?t=2104145
I faced a same situation and now my nook become normal :victory:
Click to expand...
Click to collapse
That thread tells you how to save your ROM partition before overwriting it with a backup from a different Nook and then replacing the ROM partition with your backup. Unfortunately, it appears the OP had already restored a backup of another Nook before saving his ROM partition so the procedure on that thread is unlikely to do any good at this point.

Yah, unfortunately I did not back up my own ROM partition before writing a new one. I tried putting in my serial and changing the MAC address, but as in the other thread I could not register with B&N as I'm assuming the private keys don't match my serial (as they came from my wife's nook). So unless someone figures out how to recover or generate a new private/public key pair that will work with B&N's servers, I'm stuck with a cloned nook.
It's ok though because I side load all of my books and don't need to have it online or anything. So, it is working just fine for my purposes at this point.

Nook Simple Touch Glowlight .. Need advice before rooting.

Hello all ...
Please .. I need some advice..
This is my first post. My sister has given me her Nook Simple Touch Glowlight. I would like to root it, as I've been looking for a device to keep notes and stuff on. I went as far as booting up with noogie.img and backing up the firmware. I don't know what to do, because I read that having a certain firmware changes everything? I don't think my sister updated the nook. Here is the information from the Settings / Device Info / About Your Nook.
Software Version: 1. 1. 5
Model Number: BNRV350
I read someplace that the sizes of the firmwares are different. The simple touch is 1. 82 and the simple touch glow is 1. 86.
Mine is 1 .82, but yet it has the glowlight? It says to hold the button down for two seconds to turn it on.
I see that B&N have new firmware for the nst & nstg. 1. 3 I believe. It said on the site that this firmware would be installed when the nook is idle. (via wifi) Anyway, I'm wondering if it would be ok to go ahead and root the thing, or upgrade the firmware first to maybe - 1. 2 (if I can find it?) before I do anything else? Oh and should I stay away from B&N's new 1. 3 firmware?
Thank You Very Much !!
WillyS.......

If you indeed have the Nook Simple Touch with Glowlight (black bezel), then the most recent stock firmware is 1.2.1 which can be downloaded here. I would recommend that you update to this as the first thing you do. Next you need to decide which of the multitude of rooting methods is best for you. You need to take into account what you wish to achieve by rooting the Nook and your skill/comfort level with the processes. I have followed many of the different processes, doing a factory reset between root versions. By far the easiest is Nook Manager. I, personally, prefer the Minimal rooting - back to basics method because it allows you to install just what YOU want. However, this method requires a fair amount of command line work.
EDIT: I made the assumption that you are in the US and have a US model. I believe there is a different firmware number for the international model. In any case, you should update the Nook to the most recent firmware before rooting.

Rooting nook .. Glowlight ..
Hello David and Thank You kindly for the reply!
Yes, mine is a Canadian version and it has the black bezel.
Thank you .. for correcting me on the firmware. I was looking at the wrong Nook version. (nook.barnesandnoble.com/u/software-updates-nook-glowlight/379004086)
I downloaded the correct 1. 2. firmware for the nook and I (like you) would rather install what I want to and have more control over what gets put on it. After I update the firmware, I'll come back and follow the links you provided. If you know what threads have the latest / newest info on rooting the nstg, can you please point me to it? (If you haven't already) Thank You Very Much for your help .. David.
Cheers
WS

You're welcome. If you are comfortable with a lot of manual, command line manipulation, start with the Minimal rooting - back to basics thread. There are many more and newer rooting methods, but each of them installs a bunch of apps that the creators use, which may or may not be of importance to you. If you start with the Minimal rooting - back to basics, you can then pick and choose the apps and modifications you want to apply to give you the best experience for YOUR needs. I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.

Rooting Nook STG .. Firmware 1. 2 ...
Hi David and Thank You for the reference document.
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
I'm at the rooting - back to basics thread. I'm going to read all this stuff over and see if I can figure it all out. Thanks again for your help and the document.
WS...

WillySizard said:
...
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
...
Click to expand...
Click to collapse
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.

Don't really know where to go from here, or what to do ..
@ digixmax .. Thank You for the info on the SD-card. Good to know info!
@ david0226 .. I went to the page about rooting via the link and I have basic
understanding how / what needs to be done, but I'm not having much
luck finding and using the tools. I went and looked for the file used to
extract the 2 files from uRamdisk, but I couldn't find it. I did some reading
and looking around and found a program called Preboot (I think) by
Intel and it contained bootutil 32/64 and so on. I had to install preboot & then
uninstall it, to get bootutil and then install it. I tried using it to extract
the files, but I kept getting failed messages. Like invalid switch /x.
Invalid switch /v. Invalid file uRamdisk. I know I need to extract out 2
files: init.rc and default.prop. I tried to do so in the "Administrative Command
Window" on Win7_64bit, but it just wouldn't work with bootutil. Not the
one I had anyway. Any ideas? Thanks!
WillyS......

David0226 said:
...
I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.
Click to expand...
Click to collapse
What extensions does "Extended Power Menu" provide?
Also, which uImage and uRamdisk do you use as uRecImg and uRecRAM?
TIA.

Here are the links to the relevant threads.
Extended Power Menu
Clockworkmod based Recovery post #75, see the entire thread here.
If you are going to do the Extended Power Menu, be sure to do the Clockworkmod based Recovery also or you risk wiping out everything you have done by accidentally hitting recovery in the Extended Power Menu. I you have installed Clockworkmod Recovery and accidentally hit "Recovery", it will just boot to Clockworkmod and give you a chance to back out.

@willys. I will have to look up the software I use and post tomorrow. Sorry I missed your question earlier.

@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.

David0226 said:
@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.
Click to expand...
Click to collapse
Yes, I had to go to her profile and I found it there. I'll do this part first and see how it goes. After that (I think?) I need to get an android program (some kind of Installer maybe?) to do some other work with. Anyway, one step at a time. All for now. Thanks! ... WS.

digixmax said:
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.
Click to expand...
Click to collapse
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.

Almost done, but need a little more help . . .
Mnurlan said:
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.
Click to expand...
Click to collapse
OK .. Thank You Mnurlan!
@David0226 ...
Just getting to the point where I'm ready to add programs. have edited uRamdisk and re-installed the two files. I've download android-sdk package and have installed it. I have been in the nook via wifi using ndb shell as root. I am now following your notes file. I've created the archive folder on the nook - /system/archive and I've been moving files over from /system/apps folder. I got Nook Manager written to the sd-card and I have PackageInstaller.adk from it, but I I'm not sure how I get that onto the nook. When I boot with NookManager, it ask if I want to root. I have already done that and it is working. Should I let it do it anyway?
Thank You!
WillySizard . . . .

@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}

Nook Simple Touch Glowlight .. Need advice before rooting ..
David0226 said:
@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}
Click to expand...
Click to collapse
Ahhh .. ok. Good enough then. That should get me off and running.
Thank You .. David. Sorry I'm being such a pest.

Me, also
Just paid $5 for a BNRV350 at a rummage sale.
I understand BN disabled the web browser with the current operating system.
I can get a Google search window (by repeated tapping on the "Google" or maybe the "404" or the "that's all" links that appear when I try the "connect to social" settings menu choice for Google. And "find my account" worked when given the Gmail userid (because the keypad on the Nook lacks a period for typing a proper email address, in this view).
And I can get a Twitter login page. Neither works well -- typing even a single letter into the password field resets the page, so it's letter, then tap in the field window, then another letter, then tap in the field window. Sometimes it shows a row of dots for characters already entered, other times those are invisible but the entries are still there.
Just curious to add to the above fellow's thread for anyone searching for this Nook model number, if anyone has advice or suggestions about making it useful.
Reverting to the original OS to have use of the web browser would be a welcome option, if that's possible. Pointers welcome. Right now this Nook has version 1.1.5 installed -- I gather that's one of the improved versions that killed the stock web browser.

Can the NST with v1.2.2 be rooted?

I got my first ereader, a lightly used NST and am thoroughly delighted with how much easier it is to read than on my phone or laptop. I was hoping to remove some of the bloatware as all my books are sideloaded using Calibre, but my version is 1.2.2. I couldn't find any reference to this new version on the Nookmanager thread. Can I still root it with this version?
Additionally, I am finding it hard to organise and find my EPUBs on it. The shelf function requires manual selection, which will take a while for a lot of books. At the moment I'm just keeping 5-10 books at a time of what I'm actively reading, but ideally I'd like to have my whole collection on there. If I were to root it, are there any library apps which would group the books by tags? A bit like how Calibre does it?
If not, what workarounds have people with large collections on the NST used?

fsa259 said:
I got my first ereader, a lightly used NST and am thoroughly delighted with how much easier it is to read than on my phone or laptop. I was hoping to remove some of the bloatware as all my books are sideloaded using Calibre, but my version is 1.2.2. I couldn't find any reference to this new version on the Nookmanager thread. Can I still root it with this version?
Additionally, I am finding it hard to organise and find my EPUBs on it. The shelf function requires manual selection, which will take a while for a lot of books. At the moment I'm just keeping 5-10 books at a time of what I'm actively reading, but ideally I'd like to have my whole collection on there. If I were to root it, are there any library apps which would group the books by tags? A bit like how Calibre does it?
If not, what workarounds have people with large collections on the NST used?
Click to expand...
Click to collapse
1.2.2?! Are you sure it's an actual NST? There is nothing past 1.2.1 for the NST that I know. Look under Settings>Device Info>About Your Nook. The model number of the NST is BNRV300.

That is really odd. It definitely has the model no you mentioned and says v1.2.2. Now that you mention it, I can't find the 1.2.2. on the B&N software updates section of their website, but found a reference to it on another forum where a user says their NSTG updated to it automatically when on wifi this January.
Should I be worried?

fsa259 said:
That is really odd. It definitely has the model no you mentioned and says v1.2.2. Now that you mention it, I can't find the 1.2.2. on the B&N software updates section of their website, but found a reference to it on another forum where a user says their NSTG updated to it automatically when on wifi this January.
Should I be worried?
Click to expand...
Click to collapse
I don't know anything about software version 1.2.2. However, if you would like to try rooting it, I would start with this thread.
Minimal rooting - back to basics. If you can get a minimal root with those instructions, the other more "advanced" (or not) rooting tools should also work.

fsa259 said:
That is really odd. It definitely has the model no you mentioned and says v1.2.2. Now that you mention it, I can't find the 1.2.2. on the B&N software updates section of their website, but found a reference to it on another forum where a user says their NSTG updated to it automatically when on wifi this January.
Should I be worried?
Click to expand...
Click to collapse
I would not worry. In a pinch you could do a factory reset and return to the original firmware which is not 1.2.2 I'm sure. Then you could use the 1.2.1 update zip to get it ready for NookManager. If indeed B&N is pushing an update (I've not seen it and have used WiFi regularly) you can avoid WiFi until you've rooted with NM. If there is some kind of update it may involve security issues for those purchasing B&N books with their devices. That would explain why I have not seen it.

nmyshkin said:
I would not worry. In a pinch you could do a factory reset and return to the original firmware which is not 1.2.2 I'm sure. Then you could use the 1.2.1 update zip to get it ready for NookManager. If indeed B&N is pushing an update (I've not seen it and have used WiFi regularly) you can avoid WiFi until you've rooted with NM. If there is some kind of update it may involve security issues for those purchasing B&N books with their devices. That would explain why I have not seen it.
Click to expand...
Click to collapse
Thanks for your reply.
After creating a back up I attempted to root with NM and in the final screen everything had positive remarks except 'PackageInstaller not modified' and 'ModManager not available for 1.2.2'. I figured I needed these two, so I went through the deregistration and restore to factory settings and booted to NM to avoid connecting to wifi. Strangely, on the NM main menu, it still says the system is 1.2.2.
I'm not sure if I'm missing something. I'll try factory reset again, but I'm not sure how else to get back to 1.2.1

fsa259 said:
Thanks for your reply.
After creating a back up I attempted to root with NM and in the final screen everything had positive remarks except 'PackageInstaller not modified' and 'ModManager not available for 1.2.2'. I figured I needed these two, so I went through the deregistration and restore to factory settings and booted to NM to avoid connecting to wifi. Strangely, on the NM main menu, it still says the system is 1.2.2.
I'm not sure if I'm missing something. I'll try factory reset again, but I'm not sure how else to get back to 1.2.1
Click to expand...
Click to collapse
There are two distinct "factory" operations. The one you describe just deletes user info and settings.
The other one reimages the device from a hidden and protected factory image--that won't be 1.2.2. That's the one you want. One way to get there is by eight failed boot attempts. That's very tedious. There is another way involving holding one of the buttons down during boot. Let me see if I can find it.
Edit: power down. Power up and as soon as you get anything on the screen press and hold the two bottom buttons until the factory restore dialog appears.

nmyshkin said:
There are two distinct "factory" operations. The one you describe just deletes user info and settings.
The other one reimages the device from a hidden and protected factory image--that won't be 1.2.2. That's the one you want. One way to get there is by eight failed boot attempts. That's very tedious. There is another way involving holding one of the buttons down during boot. Let me see if I can find it.
Edit: power down. Power up and as soon as you get anything on the screen press and hold the two bottom buttons until the factory restore dialog appears.
Click to expand...
Click to collapse
Ah, now I understand, I didn't realise there were two different options. Thank you for this.
Unfortunately it has lead to something very strange: I held the two bottom buttons on restart, went through both prompts confirming if I want to factory reset. It went through the process and at the selecting WiFi screen I restarted to boot to NM which still says the system is 1.2.2! Could it be that the forced update to 1.2.2 also wrote over the protected factory image?
Edit: I found these instructions and am keeping my fingers crossed they work to get 1.2.1 back
https://sites.google.com/site/xcdguides/nook/nookregion

fsa259 said:
Ah, now I understand, I didn't realise there were two different options. Thank you for this.
Unfortunately it has lead to something very strange: I held the two bottom buttons on restart, went through both prompts confirming if I want to factory reset. It went through the process and at the selecting WiFi screen I restarted to boot to NM which still says the system is 1.2.2! Could it be that the forced update to 1.2.2 also wrote over the protected factory image?
Edit: I found these instructions and am keeping my fingers crossed they work to get 1.2.1 back
https://sites.google.com/site/xcdguides/nook/nookregion
Click to expand...
Click to collapse
Yes. That was going to be my next suggestion. I hope it works.

nmyshkin said:
Yes. That was going to be my next suggestion. I hope it works.
Click to expand...
Click to collapse
Thank you so very much for your help. 1.2.1 was installed successfully and rooting worked a breeze!
I found an old version of ES Explorer on here and I'm now just adding '.disable' to the apks as recommended on another thread here to optimise the NST.
Once again, many thanks!

Rooting with NookManager
The answer to the original thread question is "yes". See https://forum.xda-developers.com/nook-touch/general/nst-nstg-fw-1-2-2-update-t3785566

@nmyshkin ...
Its true there is a version 1.2.2 ... i just got a mailer for update ... specifies 29 June 2018 as the last date after which managing and purchases from the nook store will be blocked rescinded !!!
please respond on this thread ... HERE

[NST/NSTG] FW 1.2.2 update

I've been waiting around for more than a week for my second "new" NST to update. It finally did so yesterday. The update has been mentioned on the Mobileread forums and one XDA member has already asked about rooting it so I thought I'd see what I could learn. You apparently won't learn anything from B&N as they either respond as if this is something that should not happen (so beware!) or they say it provides minor enhancements. There is no notice of the update on their cobweb-ridden website for the NST, no opportunity to do a manual update. It takes about a week of WiFi on all the time to catch the rolling push.
Edit: B&N has since posted the update zip on their website. For users with non-US firmwares, I recommend flashing US 1.2.1 firmware (see https://sites.google.com/site/xcdguides/nook/nookB&N). You cannot register 1.2.1 but you can update it before registering. At the "welcome" screen connect the device to your PC and transfer the update zip from B&N. Let the device sleep and it will do the update. Then you can register if you desire.
Edit: The time for OTA updates is past and I'm not sure if devices still running 1.2.1 will act up in any way. Certainly you won't be able to contact B&N servers and this could lead to connection error messages when WiFi is turned on.
What's new?
I can't claim to have done a thorough shakedown but there is no obvious change in the device on FW 1.2.2. I suspect this is a security update to keep the devices in line with new security measures on B&N servers so that owners can still spend money at B&N via the devices But I was curious to see if the cacerts.bks file had been changed since some certificates have already failed (a few of which have been fixed already by @tshoulihane to keep the Kindle app working). No joy there--not that I was surprised. B&N doesn't need cacerts to ensure correct negotiation with their servers via their own apps. Everything seems exactly the same.
To update or not to update
If, like me, you rooted your device earlier with NookManager, the update will fail and your device will spontaneously reboot. This behavior (occurring every Sunday morning as I listened to NPR on the TuneIn app) is what lead me to the conclusion that it was the update process. If you don't give a hoot about the update but you're not keen on having your device reboot on a whim, here is a fix: https://forum.xda-developers.com/showpost.php?p=34433959&postcount=3
Edit: well, that seemed to work at first, but then the weekly reboots began until I finally updated.
I don't know about other rooting methods potentially interfering with the update process.
If you just must have the update, it is likely you will need to restore your device to stock, re-register it, and leave WiFi on for a week or so until the update occurs (I left mine on the Library screen so I would know when a reboot--taking you to Home--occurred).
Edit: at this point, you will have to manually download the 1.2.2 update zip from B&N and manually install it on your device. This will require you to invoke a factory re-image as the update will not work on a rooted device. A NookManager card (even an old one) can be used to start the factory reset. Once that's done and you're at the "Welcome" screen, connect your device to your PC and drag the 1.2.2 update zip to the "Nook" drive. Let the device sleep. Come back in awhile and see if the update zip is still visible on the "Nook" drive. If it's gone, the update has been done. Now for rooting.....
Can I root it?
The short answer is "yes".
NookManager is versatile and wonderful, but it does have a bit of dust on it by now. I plan to look into that and start another thread. For now, there are two files which need to be edited in order to use it successfully with FW 1.2.2. You'll want Notepad++ or similar.
Prepare the NookManager card as described in its thread. Examine the prepared card in your PC. You'll see one partition:
NookManager
In that partition find the folder "scripts". You need to edit these two files:
install_nookmods
install_old_installer
In both files the change is the same. Near the top of the file you will find this line:
Code:
if [ "$SYSTEM" != "1.2.0" -a "$SYSTEM" != "1.2.1" ]; then
You want to change it to look like this:
Code:
if [ "$SYSTEM" != "1.2.0" -a "$SYSTEM" != "1.2.1" -a "$SYSTEM" != "1.2.2"]; then
Not sure how touchy spaces, etc., are, but try to follow what's already there. Save the files and you're good to go.
Now....there is an issue with a few apps like Opera Mobile and Tasker not wanting to install. They are the only two I have encountered so far. Here is the "fix": https://forum.xda-developers.com/showpost.php?p=76873102&postcount=5

Thanks!!
It works, Thanks! I just rooted my new NSTG with no issues.
:good:

Hi, I have followed all the steps, but when I restarted my Nook its directly booting into NOOK system instead of NookManager.
Can you please help me here, I don't see any logs to upload.
Thanks

tiniwings said:
Hi, I have followed all the steps, but when I restarted my Nook its directly booting into NOOK system instead of NookManager.
Can you please help me here, I don't see any logs to upload.
Thanks
Click to expand...
Click to collapse
If it's not booting off the card then one or more of the files on the card must be damaged. Rather than trying to figure it out, it would be easier to just make a new card (try formatting your old one and writing the image again). I wouldn't even make the changes needed for 1.2.2 until you establish whether the card boots. You don't have to use NookManager, just see if it will boot and then exit if it does. Then you can make the needed changes and try again. If it doesn't boot after you've done the minimal edits, then somehow the card has been mishandled. Be sure to eject the card safely from your PC.

nmyshkin said:
If it's not booting off the card then one or more of the files on the card must be damaged. Rather than trying to figure it out, it would be easier to just make a new card (try formatting your old one and writing the image again). I wouldn't even make the changes needed for 1.2.2 until you establish whether the card boots. You don't have to use NookManager, just see if it will boot and then exit if it does. Then you can make the needed changes and try again. If it doesn't boot after you've done the minimal edits, then somehow the card has been mishandled. Be sure to eject the card safely from your PC.
Click to expand...
Click to collapse
Thanks, I have tried multiple times (Format and reload) but till it does not boot into sdcard. I will try once again from scratch in the weekend.

Great!
Its works perfectly, i rooted my nook simple one touch with update 1.2.2

I am in the UK and have a Nook Simple Touch Glow-light. It was on f/w version 1.2.1 and would not connect to the internet. I downloaded the nook_1_2_update.zip from the USA B&N site at copied it to the Nook using the USB connection from my PC. However it would not update to 1.2.2, the zip file just disappears.
I then used the excellent Nook Region Changer, and changed the Nook to USA region. I again wrote the nook_1_2_update.zip file to the Nook using the USB connection, and after the next wake up cycle on my nook it updated to 1.2.2 and allowed me to register on the USA B&N website and browse books, etc, but not do any social media things, and also I cannot buy books or download free ones as I do not have a USA home address, which is required.
I again used Nook Region Changer and put my nook back to UK version, but this process 'lost' the 1.2.2 update so I am back to square one.
Apparently the two firmware updates to move a USA NST/G to FW 1.2.2 (downloaded from USA B&N site) and the one to ove a UK NST/G to 1.2.2 (downloaded from the now defunct UK B&N website) are different and incompatible.
My questions is "Does anyone have a copy of the UK version of the nook_1_2_update.zip file please?"
I would like to thank you guys at XDA for your very comprehensive and detailed information about the NST/G, and the tools supplied.

due23 said:
I am in the UK and have a Nook Simple Touch Glow-light. It was on f/w version 1.2.1 and would not connect to the internet. I downloaded the nook_1_2_update.zip from the USA B&N site at copied it to the Nook using the USB connection from my PC. However it would not update to 1.2.2, the zip file just disappears.
I then used the excellent Nook Region Changer, and changed the Nook to USA region. I again wrote the nook_1_2_update.zip file to the Nook using the USB connection, and after the next wake up cycle on my nook it updated to 1.2.2 and allowed me to register on the USA B&N website and browse books, etc, but not do any social media things, and also I cannot buy books or download free ones as I do not have a USA home address, which is required.
I again used Nook Region Changer and put my nook back to UK version, but this process 'lost' the 1.2.2 update so I am back to square one.
Apparently the two firmware updates to move a USA NST/G to FW 1.2.2 (downloaded from USA B&N site) and the one to ove a UK NST/G to 1.2.2 (downloaded from the now defunct UK B&N website) are different and incompatible.
My questions is "Does anyone have a copy of the UK version of the nook_1_2_update.zip file please?"
I would like to thank you guys at XDA for your very comprehensive and detailed information about the NST/G, and the tools supplied.
Click to expand...
Click to collapse
There will never be another update other than the US one you have already tried. I think you may be expecting too much from the device at this point. A made-up USA address might be of some use, but I doubt it. Even with US firmware from the US I could never get the Google stuff to work and I just assume that B&N never cared much about updating URLs and APIs for the social media stuff and just wanted to be sure US customers could still purchase books. But that's my somewhat cynical take.
Anyway, you can always go back to US 1.2.2 and then delete ALL the B&N stuff and build your own reader if that suits you. See here: https://forum.xda-developers.com/nook-touch/general/nst-g-removing-bn-apps-t3972941

Thanks for the quick reply, I will do as you suggest. The Nook is a reasonable little reader and the glowlight is a nice feature.
You are quite right, I think I am expecting a little too much from it.
All the best,
Alan

Hello
I'm looking for update 1.2.2 zip - tried to download from b&n website but its faulty.
I'm trying to turn nook into gps device but cant connect to internet (connecting to wifi but shows network-related error)
I hope version 1.2.2 will fix it.
Thank you

fdxx said:
Hello
I'm looking for update 1.2.2 zip - tried to download from b&n website but its faulty.
I'm trying to turn nook into gps device but cant connect to internet (connecting to wifi but shows network-related error)
I hope version 1.2.2 will fix it.
Thank you
Click to expand...
Click to collapse
Faulty? What happens?
Did you remember to do a factory reset before trying the update? You cannot update a rooted device with that zip.

nmyshkin said:
You cannot update a rooted device with that zip.
Click to expand...
Click to collapse
maybe thats the problem... I need to find original 1.2.1 (or something) software first and then update...

region change to US is the way to go with 1.2.2 update

fdxx said:
region change to US is the way to go with 1.2.2 update
Click to expand...
Click to collapse
Well, yes. I should have asked that question also...

Where does one download the 1.2.2.zip file? It's not on B&N anywhere I can find.
Thank you.

jteed said:
Where does one download the 1.2.2.zip file? It's not on B&N anywhere I can find.
Thank you.
Click to expand...
Click to collapse
They didn't make it easy.
Go here: https://help.barnesandnoble.com/app...212/~/having-trouble-connecting-to-your-nook?
Scroll down to a list of the various Nook models and click on Nook Simple Touch: 1.2.2
That will drop you down farther on the same page where you'll find manual installation instructions and below that, little pictures of the devices with the word "Download" under each.

Please, someone has the files? The links are down!!!
Thank you

dant3 said:
Please, someone has the files? The links are down!!!
Thank you
Click to expand...
Click to collapse
This is a direct link. I just tried it.
https://su.barnesandnoble.com/nook/nook2/1.2.2/351e26527e80156183e74be2da2ce89f/nook_1_2_update.zip

due23 said:
I am in the UK and have a Nook Simple Touch Glow-light. It was on f/w version 1.2.1 and would not connect to the internet. I downloaded the nook_1_2_update.zip from the USA B&N site at copied it to the Nook using the USB connection from my PC. However it would not update to 1.2.2, the zip file just disappears.
I then used the excellent Nook Region Changer, and changed the Nook to USA region. I again wrote the nook_1_2_update.zip file to the Nook using the USB connection, and after the next wake up cycle on my nook it updated to 1.2.2 and allowed me to register on the USA B&N website and browse books, etc, but not do any social media things, and also I cannot buy books or download free ones as I do not have a USA home address, which is required.
I again used Nook Region Changer and put my nook back to UK version, but this process 'lost' the 1.2.2 update so I am back to square one.
Apparently the two firmware updates to move a USA NST/G to FW 1.2.2 (downloaded from USA B&N site) and the one to ove a UK NST/G to 1.2.2 (downloaded from the now defunct UK B&N website) are different and incompatible.
My questions is "Does anyone have a copy of the UK version of the nook_1_2_update.zip file please?"
I would like to thank you guys at XDA for your very comprehensive and detailed information about the NST/G, and the tools supplied.
Click to expand...
Click to collapse
I was having this exact problem but I couldn't use the Nook Region Changer because step #4 is to reset the device which I couldn't do because it couldn't connect to the internet (RAGE!!!). I have spent days trying to sort this out it's absolutely ridiculous.
I have finally found this page: https://heeed.net/resetting-a-nook-simple-touch/ which has helped me to reset it to factory settings and get it working to a basic level again without being registered.
I'm furious really that B&N won't give us a working update so we can at least use Wifi on our devices, WTF?! Disgusting customer service! Anyway, hope that link helps someone else!

Birdish said:
I was having this exact problem but I couldn't use the Nook Region Changer because step #4 is to reset the device which I couldn't do because it couldn't connect to the internet (RAGE!!!). I have spent days trying to sort this out it's absolutely ridiculous.
I have finally found this page: https://heeed.net/resetting-a-nook-simple-touch/ which has helped me to reset it to factory settings and get it working to a basic level again without being registered.
I'm furious really that B&N won't give us a working update so we can at least use Wifi on our devices, WTF?! Disgusting customer service! Anyway, hope that link helps someone else!
Click to expand...
Click to collapse
Well, I also have learned a bit since my original post. See here: https://forum.xda-developers.com/t/nst-g-dealing-with-non-us-aka-uk-devices-in-2021.4233411/
I think there are options there which may give you a better result.