hello every one
after using android for months and no stable version yet , and i need a stereo headset
am trying to re-install wm6.5 and i am using sspl
but the mobile restart at 1% and the pc gives the error wrong vendor id
Does any of u face this issu ? any solution ?
the pc running windows 7 64 bit is that has any realation to the error , becaous i remmeber that i installed shipped rom in my old laptop and it was fine "but that was befor starting install android "
There are many ROMs for this HTC HD Mini,
So You should try the Right one made for your phone, simply contact HTC support, and give them your phone's ID code, written in your box or in your phone. and they will give you the right WM6.5 ROM.
Related
I recently put windows mobile 6 on my Wizard, and I told my friend about the ability to do it. He found a wm6 rom somewhere and managed to screw it up. I found a windows mobile 6 rom (somewhere, idk which one) that installed correctly.
Output in the boot process: (not familiar with the apache, no idea what this means)
Code:
h/w 2 r none
m-12
u-4 d 3.50.00 wwe
When I try to use or check the settings on the phone portion of the device, I get "A wireless radio must be attached to use the phone."
I believe this means I need to update my radio. If so, I don't know which piece of software and which version to use or where to find it.
help please!
thanks,
Brewer
Hi, to everybody:
I have got a HTC P3300 device (Artemis) purchased in Spain in 2006, unlocked, so I've got no problems on that.
It's was updated by me to WM6 Professional (OS CE 5.2.1620, Build 18125.0.4.2) using official ROM for free devices.
ROM Ver.
ROM Ver: 3.13.412.1 ESN
Date: 8/28/2007
Radio ver: 02.94.90
Protocol ver: 4.1.13.44
ExtROM ver: 3.13.412.102
Now I would like to upgrade it to a cooked ROM like Shady's new ones with WM6.5 or another one with TouchFlo but I can't, altough I've tried almost everything. I'm not a newbie and I work like developer so I understand the most I read but now I'm completely lost; let me explain to you.
My laptop has Windows 7 Ultimate (32bit) installed and I know that this OS(and Vista) have problems so I also tried on XP Professional SP2 without success.
I tried to upgrade the device using the exe directly and trough USPL (from this site and others) but nothing works. I always get the same 2 errors; normally when I use USPL I have error 260 (connection) because the device doesn't go to bootloader screen and if I restart the device into bootloader manually, if the update process starts (not always), it reaches less than 5 or 10% returning a 270 error with message "File corrupt".
I read a lots of in this forum and similar ones checking steps one by one, even trying to update/install USB drivers for Vista but nothing works. When I use USPL, screen goes to black and "unkonwn device" plugged in to USB port is detected on the system so I think the problem is the program can't put the device in correct state, but if I activate bootloader by my self "Sync Device" appears in devices manager but I cannot go futher as I said before.
Do I must make a downgraded to original WM5 and start from it (maybe a problem with loader version)or there's anything that I forgot?. If someone knows a link or think that I missed some step, please help me.
Any kind of help would be appreciated so much. Thank you in advanced
Solved!
OK, here I am!.
Finnally I solved the problem. The issue was that I had have to "do a hard reset before" try to update the ROM. I read somewhere that an application locked the device avoiding the ROM upgrade. I just went to settings > system > emtpty memory and since then I was able to upgrade like the posts said .
Best regards
LoKatEs said:
OK, here I am!.
Finnally I solved the problem.
Click to expand...
Click to collapse
6 minutes between your first and second post and u say: finally i solved the prob!
hahaha
good to hear its working again
Can you post a link for the WM 6.5 version, i found two files, but couldn't install
in the rom section u can find a few wm 6.5 versions.
unlock your phone with USPL and then follow the installation instructions of the roms posted
shady313 and babbelut roms are the most current ones based on 6.5
neither of them have touchflo support though but babbelut rom has spb shell, a different kind of touch cube system
mvenneker said:
babbelut rom has spb shell, a different kind of touch cube system
Click to expand...
Click to collapse
which is really awesome!
its a shame i prefer the 6.1 simple style otherwise i would of kept his rom
when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !
i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?
where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.
it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???
can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.
hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.
Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.
It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)
KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.
HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.
sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me
aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!
Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers
Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.
Hello all, I have a T-Mobile HD2 with WP7 on it. I tried using the Mango update from elfinazz but I get the following error when running DWI.EXE.
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
HD2 has been running WP7 very stable for months, with Live services activated. When I originally put WP7 on it I installed MAGLDR 1.12. Today when I got the above error, I flashed it to 1.13 with no problems, so I think there might be a communications problem with DWI.EXE. I have also tried it on a different computer with the same results. I even tried downloading CustomRUU.exe and ran that from the folder.
When I connect my HD2 to USB, the message in the white area changes from serial to USB, so the phone is seeing the USB connection, but the computer doesn't. Also, if I run DWI.EXE and don't connect the HD2 I get the exact same error.
I am running it in administrator mode. Allow USB connections in Mobile Device center was checked at first, then I unchecked it. I can't find specific steps for upgrading from the original WP7 release to Mango, so I assume I am missing a step. I have been trying to get this working for a couple of hours now with no luck, any help would be appreciated.
Thanks!
Solution ..
Hi, I had the same problem, don't worry its so easy to solve it
Reinstall or install depends the case the Windows Mobile Device Center, the same one you used with WM6.5 and the problem will be solved, why ? because this problem its a driver problem, if you are using windows 7 you need the drivers of your mobile, and this drivers will be given in Windows Mobile Device Center once you installed connect the mobile, will start to recognize the phone and drivers and then try to flash again ....
I had same problem and solved by doing this
Look at me desperate LOL
http://forum.xda-developers.com/showthread.php?t=1131533
and answer from jorge_jomi almost at the end ...
Hey
Ill give that a try thanks jorge
Hi , i am new here and i just got my HD2 and it had WM 6.5 and i replaced it with Android nand 2.3.5 but after i finished installing Android on the Device i found that there is no market included so i downloaded a new rom and tried to flash it after deleting the old one using task29 and followed all the steps to install but after the reboot of installation i found that same old rom still exists so i tried for another 3 times as a clean install but it didn't work again and still no market on the device so what is the best android rom for HTC HD2 ?
Help needed
Use ndt ginger rom or ndt miui rom
Probably the best
Do task 29
Flash magldr
Flash right cwm partition
Flash rom
And enjoy your rom with market after logging in via Google acc..
Sent from my HD2 using xda premium
Done
i finally fixed the problem but i have another one , my internet wireless connection requires an login id and password not from the router but when i open the browser every time i open my pc and try to connect but when i try to connect from my HD2 and open the browser the login page dosent come up it shows me that i am not connected to any service like Wi-Fi - Edge - 3G and i need it so hard to download and use applications on my HD2
Okay make sure it says connected when you are in settings / wifi.
If so you should try to open any website like google.com. It will try to connect to Google but will get to your login page.
Sent from my HD2 using xda premium
actually i tried doing this but it didn't work for me
okay i don´t know how to fix this atm..maybe flash another rom ..
my rom is very good and i am not having any problems with it all i need is some help for how to connect to my hotspot Wifi connection and not get that ( web page not available) screen
have u tried wifi protected setup and also,does your bluetooth work?
my bluetooth is working and i dont have a protected wifi its hotspot belongs to my neighbour and he knows that i am connected with him but i cant connect from my mobile and if u think that its the rom is not good tell me which rom to install and give me a link for it
I think it is the best roms SD
This is the best rum in the link
[16 SEP][SD/MAGDLR]MccMBoxmaX Transformer SS V6.5 Android 2.3.3[Sense 3.0] 3D GFX Fix
http://forum.xda-developers.com/showthread.php?t=1171237
Not what it seems.
fanning the flames you see the
Thank you
Google trnslate.
actually i am looking for a NAND rom cuz my SD card is just 2gb