[Q] HD2 Problem - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi , i am new here and i just got my HD2 and it had WM 6.5 and i replaced it with Android nand 2.3.5 but after i finished installing Android on the Device i found that there is no market included so i downloaded a new rom and tried to flash it after deleting the old one using task29 and followed all the steps to install but after the reboot of installation i found that same old rom still exists so i tried for another 3 times as a clean install but it didn't work again and still no market on the device so what is the best android rom for HTC HD2 ?
Help needed

Use ndt ginger rom or ndt miui rom
Probably the best
Do task 29
Flash magldr
Flash right cwm partition
Flash rom
And enjoy your rom with market after logging in via Google acc..
Sent from my HD2 using xda premium

Done
i finally fixed the problem but i have another one , my internet wireless connection requires an login id and password not from the router but when i open the browser every time i open my pc and try to connect but when i try to connect from my HD2 and open the browser the login page dosent come up it shows me that i am not connected to any service like Wi-Fi - Edge - 3G and i need it so hard to download and use applications on my HD2

Okay make sure it says connected when you are in settings / wifi.
If so you should try to open any website like google.com. It will try to connect to Google but will get to your login page.
Sent from my HD2 using xda premium

actually i tried doing this but it didn't work for me

okay i don´t know how to fix this atm..maybe flash another rom ..

my rom is very good and i am not having any problems with it all i need is some help for how to connect to my hotspot Wifi connection and not get that ( web page not available) screen

have u tried wifi protected setup and also,does your bluetooth work?

my bluetooth is working and i dont have a protected wifi its hotspot belongs to my neighbour and he knows that i am connected with him but i cant connect from my mobile and if u think that its the rom is not good tell me which rom to install and give me a link for it

I think it is the best roms SD
This is the best rum in the link
[16 SEP][SD/MAGDLR]MccMBoxmaX Transformer SS V6.5 Android 2.3.3[Sense 3.0] 3D GFX Fix
http://forum.xda-developers.com/showthread.php?t=1171237
Not what it seems.
fanning the flames you see the
Thank you
Google trnslate.

actually i am looking for a NAND rom cuz my SD card is just 2gb

Related

Android USB Debugging / Sorry! The application settings (process com.... issues

Hi,
Ive checked the forums but i cannot seem to find a thread that answers my question. Maybe this has not been asked or people have incorrectly titled their threads.
Ive just updated to the latest radio (no issues).
Changed my ROM to Chuckys GTX lite (no issues). Also used DUTTY Creme V4
I have then booted Google's android, using Darkstones 7/8/10 build of Froyo.
It boots into Android fine but upon start up i always get the message:
'sim card changed' then 'sorry! The application settings (process com.android.settings) has stopped unexpectedley. please try again'
which i then click force close
Im also having trouble finding the correct software to use USB mode to transfer my files to the phone in Android - I think i now have to use HTC Sync but HTC's site asks for a serial,.... which obviously i cannot download. I just seem to default to 'USB Debugging' which does nothing for me.
An help would be appreciated
Thanks
i also can not connect my HD2 with this build via USB...
any idea?
Currently using ChuckyDroidROM and the FroyoStone 07.08.2010 build, installed "Automount" from the Android Market, disabled "USB Debugging" and set Automount to enabled, and it works perfectly fine now, Windows XP, Windows 7 and Ubuntu 10.04 all see the microSD card and can access it perfectly
iiNFAMOUS CHRiS said:
Currently using ChuckyDroidROM and the FroyoStone 07.08.2010 build, installed "Automount" from the Android Market, disabled "USB Debugging" and set Automount to enabled, and it works perfectly fine now, Windows XP, Windows 7 and Ubuntu 10.04 all see the microSD card and can access it perfectly
Click to expand...
Click to collapse
Amazing, thank you very much, been serching for something like this for hours. You have made my day!!
has anyone else had the error in my OP, I dont know if its having any effect on the OS but its good piece of mind to know what it is.
Cheers
thanks a lot...gonna try right now...
great...it works...
now I can access my SD card, but when I paste something and then disconnect the USB cable, nothing appears in File Explorer... For example: I tried to make new folder "music"and to put there some music files. I did that, but then I couldn't find the folder... Any suggestions?
muscular said:
now I can access my SD card, but when I paste something and then disconnect the USB cable, nothing appears in File Explorer... For example: I tried to make new folder "music"and to put there some music files. I did that, but then I couldn't find the folder... Any suggestions?
Click to expand...
Click to collapse
Be careful about transferring files to your sdcard via android...
there's a reason DarkStone probably disabled it...
I was on older builds that supported this and ended up messing up the filesystem of the card... nothing a "repair without formatting" can't handle, but still takes some time to figure out...
Im running HSPL3, ChuckyROM GTX Lite, JMZ DualBoot and Android 2,1 i believe... The Desire one w. sense...
Everything works perfectly, but theres no connection trough the USB only charging.
Tried to turn op USB debugging and install Automount (No luck)
Alså tried to change the connect to pc setting fra just chargin to all of the other options... Still no luck
Anyone have any ideas?
I'm having same issue as OP.
Went from Desire v5 to Froyo darkstone (7/8), and no data connection, and same error "Sorry! The application Settings (process com.android .settings) has stopped ..etc when I try to accept the "Sim card changed " notification.
When I try to play with APN settings, it just constanlty says : Connection failed due to incorrect APN settings on Mobile Network screen.
There was a warning with this build about limited or no data, but didnt think it would not work at all, I had a cracking down rate with Desire V5, but would like to carry on running this Froyo build.
Any help?
To OP:
Just seen the following in the build thread:
Update:
a) APN settings crash, I will fix this asap.
Last edited by DarkStone1337; 8th August 2010 at 12:03 AM..
Re-EDIT!
Check this: worked for me..... http://forum.xda-developers.com/showpost.php?p=7514490&postcount=1179
Lol, I deleted the apn settings before the backup step. Lost my o2 internet now. Anyone had the issue of the mobile phone signal icon dropping every min it so. It will show full or half etc signal then the next min will show no signal bars then after another min or so full or half etc again. I can still make calls when the phone shows no signal though. This is with chucky gtx lite and darkstone latest froyo build. Same was with duty Rom also.
Another issue I've found is the screen going sort of black and white inverted and really bright. Anyone else got this if just me, I have to reboot the phone to fix. It's only happened twice though in a week.
Sent from my HTC Hd2 Android
using XDA App

[update] htc sync 3.0.5422--> 3.0.5481

if you use your HTC HTC sense build in HD2, you can sync with HTC sync tool.
here can download it, because you can download from htc.com only with a android phone serial number
old:
http://ul.to/hfluko setup_3.0.5422.exe 55.36 MB
new:
http://ul.to/eu1qaq htc sync_setup_3.0.5481.rar 68.57 MB
Thanks for the efforts, I will be happy to try it.
oh thanx works with mdeejay.
little bit strange that it works; a legend picture whos called htc hd2 and has 4gb free space
kendimce said:
if you use your HTC HTC sense build in HD2, you can sync with HTC sync tool.
here can download it, because you can download from htc.com only with a android phone serial number
http://ul.to/hfluko setup_3.0.5422.exe 55.36 MB
Click to expand...
Click to collapse
kendimce,
Thank you very much for this. HTC Sync installed and working fine! Without being able to sync my outlook stuff, I'd have to switch back to WinMo, but I'm keen to stick with Android now I've got over that major obstacle. Thanks again!
It works the 1st time (installed last week) and now it failed to detect my device (error message on PC: no device connected). I tried uninstall the HTC sync and drivers and reinstall it from fresh (4-5times) with no luck. I also tried many methods posted in variuos fourm and still have the same error message.
Have anyone experince this and how you resolve it? Please help.
Same here.
I get "No Device connected" on PC and "Unable to find HTC Sync" on phone.
I am on Artemis 27 and Matt c 1.7 Android.
and, yes, I am putting USB Mode into HTC Sync!
Any thoughts?
GG
Same here. Can install HTC Sync OK, but can't connect - "Unable to find HTC Sync on your PC.............." and "No device connected" messages.
I'm using Windows 7 - might this be an issue ?
only with HTC Build
HTC Sync will only work with HTC builds like HTC desire.
Hi I have a HTC HD2 and running sense.
Installed HTC sync the above version but i'm not able to sync. When i plugin my HD2 the system does not even react.
Any ideas?
Running Vista X64
kendimce said:
if you use your HTC HTC sense build in HD2, you can sync with HTC sync tool.
here can download it, because you can download from htc.com only with a android phone serial number
http://ul.to/hfluko setup_3.0.5422.exe 55.36 MB
Click to expand...
Click to collapse
Not true, I ve got it without serial number. It does not work at all though...... switching to WinMo, it DOES work. The Andriod in HD2 needs seriously still updates, you do not have any sound, no YouTube playing, can not configure the data access to my phone service.... buf........... is like iPhone actually.....
wilsojer said:
Same here. Can install HTC Sync OK, but can't connect - "Unable to find HTC Sync on your PC.............." and "No device connected" messages.
I'm using Windows 7 - might this be an issue ?
Click to expand...
Click to collapse
you can find these tips on htc site :
Tips 1:
If you cannot see the HTC Sync option when you connect your phone to the computer via USB, please follow the
Instructions below:
1. Make sure you select USB Debugging in Settings > Applications > Development before connecting your phone to the computer
2. Connect you Phone to the PC and wait 20 seconds for your phone to install HTC Sync on your phone.
3. Unplug the USB sync cable. Wait for 5 seconds. Reconnect the Phone to the PC using the USB cable.
4. Select “HTC sync” and wait for HTC Sync to recognize your Phone. This process could take up to a minute your first
time connecting to the computer.
Click to expand...
Click to collapse
SOURCE :http://www.htc.com/europe/SupportDownload.aspx?p_id=316&cat=3&dl_id=982
Few Pointers.
- make sure the android build you are using is a sense enabled build
- check with the android rom maker, if the HTC Sync functionality is supported by
the android ROM you are using.
- make sure you start the HTC syn app first and then connect the phone to ur pc.
Following the above, HTC sync should work straight off, once you put the phone in proper mode.
I have VBN ROM(Senseless) + Darkstone froyo(most complete ROM at the time,HTC Desire Build) and it works without any errors.
Hope this helps
kendimce said:
if you use your HTC HTC sense build in HD2, you can sync with HTC sync tool.
here can download it, because you can download from htc.com only with a android phone serial number
old:
http://ul.to/hfluko setup_3.0.5422.exe 55.36 MB
new:
http://ul.to/i8284r _htc sync_setup_3.0.5481.rar 68.57 MB
Click to expand...
Click to collapse
Hi Kendimice, I can't download 3.0.5481, can you confirm the link? I have done the 3.0.5481 upgrade from 3.0.5422 and it fails to sync. It shows connect but simply sync nothing to my HD2_MDJ_DHD v4.1. Do you have any clue on this? I try uninstall 3.0.5481 and install back 3.0.5422 and reload MCCM DHD beta2 and it fail to recognize (it was ok before I try MDJ v4.1 and 3.0.5481 upgrading).
yongck7 said:
Hi Kendimice, I can't download 3.0.5481, can you confirm the link? I have done the 3.0.5481 upgrade from 3.0.5422 and it fails to sync. It shows connect but simply sync nothing to my HD2_MDJ_DHD v4.1. Do you have any clue on this? I try uninstall 3.0.5481 and install back 3.0.5422 and reload MCCM DHD beta2 and it fail to recognize (it was ok before I try MDJ v4.1 and 3.0.5481 upgrading).
Click to expand...
Click to collapse
You can just download HTCSync from the htc website:
http://www.htc.com/www/SupportDownload.aspx?p_id=324&cat=3&dl_id=1058
Atleast something!
I downloaded 3.0.5481 from HTC website without problem.
I'm surpized you can have "HTC Sync" in the USB options of a non sens build (but never checked).
You can check is adobe air has not been updated. I think the HTC software need it.
I always had problem under winmo (crash of outlook after sync).
Now it's working ok with Android.
My PC config is actually:
Win7 X64
Outlook 2010 x32
DAMO 8.0.2 IF6
HTC Sync 3.0.5481
Adobe Air 2.5.1.17730
My HD2:
MDJ FroYo Matted V1.4
Kernel MDJ 7.5HD
HTC Sync stopped working when I tested the 7.1 kernel (from 6.1 to 7.1).
Impossible to connect the phone again!!!
(I don't say it's a kernel problem... I just describe what happened).
I reinstalled Android (format SD, fresh instal but back to 6.1)... same (so I don't think it was due to the Kernel update).
So I format, reinstall my PC. Then Ok.
Since then, no problem even after the latest Adobe Air Update.
Sometime I have an error message like "can't update PIM" or something like this with HTC Sync. I just restart my laptop (for info I never restart the OS, just idle it... don't know how you call it in English... it's the sleep state of a laptop).
Hope this could help...
HTC Sync older version
Hey guys,
Not sure if it was mentioned somewhere here before, but I found out (as I already read elsewhere) that with some ROMs, HTC Sync only works when you use the older version of the software (so 3.0.5422 in stead of 3.0.5481).
It didn't work for me (no recognition pc>phone & vice versa) with the latest version, so I uninstalled it. Now with the older version of the software, syncing seems to work fine for me!
Hope this helps some of you....
regards,
J
Thanks, this is wonderful. I would like to try it!

[Q] Can't sync

Hello all,
Im trying to flash a new NAND ROM. The Mdeejay gingerbread rom.
But i cannot get an sync connection with my phone.
I flashed my first nand rom threw windows active sync, but obviously i dont have winmo no more.
Im currently on Gauners Desire HD NAND build.
I have installed the htc sync software (with anti-virus disabled), and when i connect my phone and set the connection to HTC sync, its starts searching for sync on my laptop. This takes a while and after that it basicly tells me that htc sync cannot be found on my laptop This happens when im actually looking at the htc sync software on my laptop.
Anybody has an idea what could be the problem?
Thanks
you have try htc sync for htc desire not hd2 sync soft
download from wwwhtc.com/www/SupportDownload.aspx?p_id=324&cat=3&dl_id=982
I am using the software for the htc desire.
I have latest htc sync software installed.
Anyone else?
Windows version installed? XP, Vista, 7, 32b/64b? Need more info.
First thing you can try, exit htc sync on your computer (Make sure you right click the taskbar icon, and choose exit. now connect phone by USB, when your phone asks what type connection, choose htc sync, the phone will now look for the software, while its looking, run htc sync, if all goes well, it should find it.
If that doesnt work, then my first sentence stands.
Ok i have manged to get a sync now, edditing some stuff in MSconfig
(im on windows 7 ultimate) So now i have my connection, but as soon as i try to update to MAGLDR111 threw romupdateutility.exe
it says it cant find a connection, anybody have any ideas?
Nevermind, got it this thread can be closed.
Thanks guys!
Hi guys sorry but before you close the thread, I am having the exact same problem.
I flashed my first NAND Rom from Cotulla which is working brilliantly so far. However I just wanted to try another ROM but I cant get my phone to SYNC with the computer. I am using the latest version of HTC Sync for Desire
Please note that I was previously able to sync just fine..
Now when I connect the phone to the computer it says CONNECTING.... for around a minute then it just says UNABLE TO FIND HTC SYNC ON YOUR PC.... even though i have HTC Sync Installed just fine.
I have Windows XP. I have tried restarting computer and phone. Also uninstalled and reinstalled HTC Sync several times but to no avail.
Please could someone help me.... or the original poster please tell me how he sorted out the problem
You dont need the sync i found out.
If you go into the normal bootloader (hold down volume button and powerbutton)
Connect your usb, wait for the bootloader to say USB, then update to MAGLDR 1.11, and done
then just (as usual) open the 4th option in the MAGLDR menu, and flash your new rom.
Have fun
I have magldr 1.11 and I have a problem with syncing my hd2. I go into magldr menu, choose no. 4, says usb...usb, but when I try to flash the new rom, it says error, no connection. Is there a solution for this?
Sent from my HTC HD2 using XDA App

[Q] I can't access the internet via Data Connection

Hi All,
I have recently installed the DFT ROM om my HD2, I want to sync my contacts using my Windows Live account.
I got this message every time I tried to access the network data connection:
"can't connect
We're having a problem connecting to windows live. make sure you have good reception. if you do, the problem may be on the other end. wait a little while and try again"
and if I tried to access gmail:
"Not updated We're having a problem connecting to m.google.com. try again later.
Error Code: 80072FA8"
I tried both data connection and 3G connection.
does this ROM have such problems? what is the best ROM to install instead of my current ROM?
All the other roms are directly based off the original DFT rom. Only major difference would be the chevron is built in. Was fantastic for me since I had all sort of connect problems with chevron. I would use a rom that has that built in.
As far as data goes you would probably have to enter your apn. I had to. Or an easier way would be to load a rom that had chevron built in and download HTC Connection Setup from the market or sideload it and that should straighten that out.

[Q] Changing the Stock Desire ROM to new one

I have Eu HD2 which has the Stock Desire Rom installed and all is working fine but I would like to install a new ROM like one of the many that use Sense 3.0 or android 2.3.5. I would also like to have my SD card partitioned so I actually have space to install apps on my phone
How do I go about doing this?
PS- Sorry for the super Noob question :-/
PPS - the ROM I had in mind was
http://forum.xda-developers.com/showthread.php?t=1272440
please
read the stickies about CWM in the dev section
erm, any chance of a friendly link to get me started
vrchris said:
erm, any chance of a friendly link to get me started
Click to expand...
Click to collapse
Here.
Thats great cheers! One small problem at the moment is I can't get my phone to sync with my PC now. I can get it to connect and I can view the files on it in Explorer but it won't "sync" - any ideas?
I have Windows 7 64bit
reinstall the drivers for activesync
That instruction about syncing / getting an active sync connection doesn't mean what it appears to mean. It simply means get a USB connection.
Put phone in bootloader, connect to USB, when word. "Serial" becomes "USB", that's an activesync connection and you can flash.
Try this one:
http://forum.xda-developers.com/showthread.php?t=1185087

Categories

Resources