Related
Hi there!
Please, can anyone help me where I can get setcpu.txt file to set up my SetCpu on custom
iivanovic said:
Hi there!
Please, can anyone help me where I can get setcpu.txt file to set up my SetCpu on custom
Click to expand...
Click to collapse
You can create it, cimple create a new text file, rename it to setcpu.txt, and add frequencies. Example: 176000,480000,5280000,576000
Edit: I added my setCPU.txt
Thank you so much,guys!
Take care!
Mod edit: not dev related, moved to general
I just tried this but my 32b does not change to max 710 even though I am selecting that...it still shows 576...an ideas?
I am running Cyanogen 6 btw.
Where do you put this .txt so system can recognize it? Isn't it kernel related cpufreq, so you can clock your cpu?
WoblyGoblin said:
Where do you put this .txt so system can recognize it? Isn't it kernel related cpufreq, so you can clock your cpu?
Click to expand...
Click to collapse
30 seconds on Google got me here.
THx a lot DonJuan, but can you post you screenshots of your profiles, i installed program,put .txt file, found it with prog,put widged,ignore listed,made profiles and still it says 576 MHz
Your not going to get above 576 MHz unless you flash a OC kernel. Google for dumfuq kernel and you should find a thread called kernel corner that's here in the XDA forums. I'm using the 614 MHz kernel right now and I've been running for over 24 hours without a hiccup.
Sent from my HTC Magic using XDA App
Thx a lot, so I was right at first it is kernel related, but thx again, will try
Does this work on the Gome Flytouch with 256MB of RAM. I see it posted for Android OS v1.6 but there is no SetCPU.txt for ARM926xx which runs at 350MHz but on all these sites that read VIA 8505 suppose to do 450MHz to 533MHz.
Well I assumed that since you posted in the myTouch 3G forums that you had one.
Sent from my HTC Magic using XDA App
DonJuan692006 said:
Your not going to get above 576 MHz unless you flash a OC kernel. Google for dumfuq kernel and you should find a thread called kernel corner that's here in the XDA forums. I'm using the 614 MHz kernel right now and I've been running for over 24 hours without a hiccup.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
I tried that and now I am stuck on the My Touch booting screen...any ideas?
Type in the SetCPU in the Google Search this is were I had ended up.
shaolin95 said:
I tried that and now I am stuck on the My Touch booting screen...any ideas?
Click to expand...
Click to collapse
You flashed the wrong one. Put your fastboot info here (back+power).
Sent from my HTC Magic using XDA App
Serris said:
You can create it, cimple create a new text file, rename it to setcpu.txt, and add frequencies. Example: 176000,480000,5280000,576000
Edit: I added my setCPU.txt
Click to expand...
Click to collapse
...i´m lg optimus x2 user. which values do i have to put in the setcpu.text?
Doesn't work the way I wanted it to. You can make your own .txt file but that doesn't mean it will listen to it. The app allows you to set it but the device doesn't run at those frequencies that you've put in the .txt.
It's really too bad too. I wanted to O/C mine to 1.5ghz and I suppose the kernel only allows 1400 & 1600. No middle point! 1400 is fast and 1600 is too much. 1500 is perfect yet I can't set that.
sigh.
franky_z said:
...i´m lg optimus x2 user. which values do i have to put in the setcpu.text?
Click to expand...
Click to collapse
Franky did you ever find the values for the setcpu.txt fe? if not i may have some ideas. or if you have could you take the time to post them? i have a G2x and need specific values.
Hi, folks! Are you ok?
I'm new here (indeed in the Android's world), I can't post in development forum, so here I am.
I have instaled my first custom ROM right now, Kyrillos' ROM, but looks like de overclock feature not works.
My decision to choice this ROM its about a video I saw in YouTube showing the overclock in 1.3GHz, so, for me, this is a very important feature.
I check this in the setCPU and the value stills 667. I followed all the instructions, all the rest its run like a charm, I can run live wallpapers now and all the stuff, but the overclock thing is perturb me...
Anyone can help me with that?
PS: Sorry about not put the thread in the [OFFICIAL] Kyrillos' ROM Problems, Questions & Answers...
Hi..
choose a kernel from [URL="forum.xda-developers.com/showthread.php?t=1129367]here[/URL] which best suits your needs and flash it just like you flashed the rom.. You'll be able to overclock after that
Next time ask here dude...
vikraam said:
Next time ask here dude...
Click to expand...
Click to collapse
He gave a PS
Rapier07 said:
Hi..
choose a kernel from [URL="forum.xda-developers.com/showthread.php?t=1129367]here[/URL] which best suits your needs and flash it just like you flashed the rom.. You'll be able to overclock after that
Click to expand...
Click to collapse
Hi! Thank you for your fast reply!
So, that's another flash thing. OK. So, my serious doubts:
1 - Overclock that way may harm my phone? Life time of processor, battery temperature, things like that...
2 - What you indicate to my device (Samsung Galaxy 3 i5800), "performance" or "ultimate"?
Regards!
vikraam said:
Next time ask here dude...
Click to expand...
Click to collapse
My mistake, very sorry...
tarciozemel said:
Hi! Thank you for your fast reply!
So, that's another flash thing. OK. So, my serious doubts:
1 - Overclock that way may harm my phone? Life time of processor, battery temperature, things like that...
2 - What you indicate to my device (Samsung Galaxy 3 i5800), "performance" or "ultimate"?
Regards!
Click to expand...
Click to collapse
1.Well the voltages aren't raised so overclocking won't hurt..
2. You can give them both a try. Had some flickering issues with ultimate so I'm using performance now..
Rapier07 said:
1.Well the voltages aren't raised so overclocking won't hurt..
2. You can give them both a try. Had some flickering issues with ultimate so I'm using performance now..
Click to expand...
Click to collapse
Tell me one thing, if the voltages are not raised, how come battery consumption is more?? I am guessing, increase in frequency increases temperature and hence raises consumption. Or is it something else??
dhirend_6d said:
Tell me one thing, if the voltages are not raised, how come battery consumption is more?? I am guessing, increase in frequency increases temperature and hence raises consumption. Or is it something else??
Click to expand...
Click to collapse
I've got no idea about that but overclocking doesn't cause much battery drain.. It drains more due to data connection specifically 3G..
Rapier07 said:
1.Well the voltages aren't raised so overclocking won't hurt..
2. You can give them both a try. Had some flickering issues with ultimate so I'm using performance now..
Click to expand...
Click to collapse
Understood.
But, a last thing before try this: in the thread, theres a warning "Convert filesystems to rfs before flashing kernel."... So, how exactly I do that?
Thank you again!
tarciozemel said:
Understood.
But, a last thing before try this: in the thread, theres a warning "Convert filesystems to rfs before flashing kernel."... So, how exactly I do that?
Thank you again!
Click to expand...
Click to collapse
Navigate to android/data/fugumod on your sdcard.. Make a new file named
fs.convert
Open it and in a text editor and type
Stl6 rfs
stl7 rfs
Stl8 rfs
Save the file and reboot your phone
Rapier07 said:
Navigate to android/data/fugumod on your sdcard.. Make a new file named
fs.convert
Open it and in a text editor and type
Stl6 rfs
stl7 rfs
Stl8 rfs
Save the file and reboot your phone
Click to expand...
Click to collapse
You don t have to convert. That was only for the earlier versions of G3Mod. You can flash kernel directly without converting.
dhirend_6d said:
You don t have to convert. That was only for the earlier versions of G3Mod. You can flash kernel directly without converting.
Click to expand...
Click to collapse
Indeed, the instalation was automatic and painless and now I'm at 950MHz!
Last doubt: I need keep the setCUP installed for anything?
tarciozemel said:
Indeed, the instalation was automatic and painless and now I'm at 950MHz!
Last doubt: I need keep the setCUP installed for anything?
Click to expand...
Click to collapse
Yes. It controls the CPU frequency. If you don t have that how will you change frequency and set profiles?? You have to have it.
@Rapier07
@dhirend_6d
Guys, very very thank you for your patience! Thanks to you my phone is mutch better now!
I'll continue exploring this fantastic Android's world!
Great regards!
so when we flash this kernel will it replace Kyrillos ROM or is it an add-on ??
shubhamvadhera said:
so when we flash this kernel will it replace Kyrillos ROM or is it an add-on ??
Click to expand...
Click to collapse
The kernel won't change the Rom.. your data.and settings will be intact.. it allows you to overclock your device
tarciozemel, can u tell me step by step, how u chg ur kernel , because mine have same problem with u, unable to overclock more then 667ghz , thks!
fnixirix said:
tarciozemel, can u tell me step by step, how u chg ur kernel , because mine have same problem with u, unable to overclock more then 667ghz , thks!
Click to expand...
Click to collapse
Download the the kernel that you want from here.
The details of the various kernels are as follows : -
Lite : - NON OC
Performance : - 190-950 MHz
Ultimate : - 200-1200 MHz
Extreme : - 200-1400 MHz
Copy the required .zip of the kernel to the SD card and apply via CWM recovery or just flash the .tar as one package using ODIN.
Then use SET CPU to overclock.
Hello EPIC users (my second family) Two EVO gurus Carhauler1969 and Ropadope Have spent countless hours creating a simple Memory tweak for the EVO. I now share its goodness with you. I have tested it on my Wifes EPIC and have found it to very smooth and extremly easy to apply This is not my work! So please enjoy and give credit where credit is due.
http://vaelek.com/index.php?/topic/1916-
Would try, but v6 and adrenaline are good enough for me. And I don't wanna make another account
saramon said:
Would try, but v6 and adrenaline are good enough for me. And I don't wanna make another account
Click to expand...
Click to collapse
No discredit to v6 or zepplinrox His work and assistance is amazing!
Sent from the EVO I had implanted in my skull
Tryin this out cuz I didnt put v6 back on my epic after changing ROMs so whet the heck lets see how it is
Sent from my SPH-D710 using xda premium
I wish someone would put up a sticky on memory management. I've seen a lot of competing information about what tweaks work and whether or not they have any substantial effect on speed and reliability. Some say that stock GB does fine, others swear by the adrenaline or V6 tweaks, and now we add another suitor to the mix. Any chance someone with a good understanding of the mechanics would be willing to put something definitive together for the community?
I see more free ram when I use them but don't notice any real difference when using the phone.
Sent from my SPH-D700 using xda premium
I noticed a major jump in quadrant scores vs. stock, the reason I use v6 and adrenaline is because they work in conjunction, and it leads to an amazing phone. I am sure this would work well, but I don't want to wipe out my init.d scripts I already have, and not sure if it would work with 3g supercharger either... and that is a must for me. Thanks for the post though.
Carhauler and ropodope updated their tweak check it out if you haven't yet. no messing with scripts just plain easy! my wifes epic is smoother than melted butter she hated that i wanted to root her phone but now she is grateful. She is running toadlifes CLEANGB build 16 with go launcher and has no lag... AT ALL..
ok, so where do you find the link to download this memory tweak?
where can i find the download link for car-o-dopes memory tweak for the epic?
I used to run v6 until I saw several forced reboots. Since then I've stuck with stock mem management. Not enough of a benifit as any time gained through the tweaks was lost 10 fold waiting for the phone to boot up a couple times.
I do use the sd card tweaks and it does seem to help slightly.
Sent from my SPH-D700 using XDA App
mookiemoo said:
where can i find the download link for car-o-dopes memory tweak for the epic?
Click to expand...
Click to collapse
There is no download just two apps from the market if you dont already have them... This tweak was meant for EVO but i have tested it on my wife epic with very impressive results just subscribe to the thread and follow the super easy instructions.
rocket321 said:
I used to run v6 until I saw several forced reboots. Since then I've stuck with stock mem management. Not enough of a benifit as any time gained through the tweaks was lost 10 fold waiting for the phone to boot up a couple times.
I do use the sd card tweaks and it does seem to help slightly.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Then this tweak is exactly for you it was written for users like you and I who hate hassling with scripts and waiting for boots.... no script hassles just super simple to apply all you need is two apps from the market and follow the instructions.
Didn't Work For Me
jayshocka said:
There is no download just two apps from the market if you dont already have them... This tweak was meant for EVO but i have tested it on my wife epic with very impressive results just subscribe to the thread and follow the super easy instructions.
Click to expand...
Click to collapse
I just tried this. The following instruction from the guide regarding the use of System Tuner says: "Click "tweaks", select SD Cards, change your io scheduler from bfq to deadline, click boot settings, select Re-apply SD tweak and select init.d script. exit system tuner."
I found a couple of differences when I followed their instructions. When I got to the System Tweaks page, my IO Scheduler was already set at "Deadline". Then, when I clicked on "Root Settings", then selected "Re-Apply SD Tweak", I was given only two choices: "Disabled" and "On boot completed". There was no option for "init.d script". So I could not complete the process.
I followed the guide to the letter (and picture). What did I do wrong? I'm currently running the GB update with Nubernel's Kernel (Firmware version: nubernel - 2.6.35_v0.0.1. Baseband version: S700.0.5S.EI22. Kernel version: 2.6.35.7-nubernel+)
Lorenzo L said:
I just tried this. The following instruction from the guide regarding the use of System Tuner says: "Click "tweaks", select SD Cards, change your io scheduler from bfq to deadline, click boot settings, select Re-apply SD tweak and select init.d script. exit system tuner."
I found a couple of differences when I followed their instructions. When I got to the System Tweaks page, my IO Scheduler was already set at "Deadline". Then, when I clicked on "Root Settings", then selected "Re-Apply SD Tweak", I was given only two choices: "Disabled" and "On boot completed". There was no option for "init.d script". So I could not complete the process.
I followed the guide to the letter (and picture). What did I do wrong? I'm currently running the GB update with Nubernel's Kernel (Firmware version: nubernel - 2.6.35_v0.0.1. Baseband version: S700.0.5S.EI22. Kernel version: 2.6.35.7-nubernel+)
Click to expand...
Click to collapse
do you mean stock GB update?
I do not believe it supports init.d
I am running CLEANGB rom with success... I am not the developer just a messenger post this back in the forum they might be more helpful than I could be sorry I promise it is worth it
Sent from my PC36100 using XDA App
Very nice work, must have put alot of time into this.
49ml said:
Very nice work, must have put alot of time into this.
Click to expand...
Click to collapse
not me give thanks to the authors of the thread carhauler1969 and ropodope
Sent from my PC36100 using XDA App
rocket321 said:
I used to run v6 until I saw several forced reboots. Since then I've stuck with stock mem management. Not enough of a benifit as any time gained through the tweaks was lost 10 fold waiting for the phone to boot up a couple times.
I do use the sd card tweaks and it does seem to help slightly.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Could you please share the link to sd card tweak? Thanks
Naddict said:
Could you please share the link to sd card tweak? Thanks
Click to expand...
Click to collapse
There is a SD tweak included in this
Sent from my PC36100 using XDA App
Most of the roms include the sd tweak to increase the read cache to 2048k, so you may already have it.
Sent from my SPH-D700 using XDA App
My phone is nothing without games .
As we all no theres many laggy games .
There's alot of people fixing this by a lot of process,risk and steps .
Can we know everything we can do for smooth gaming !
This Thread will be helpfull to all if you all share what process,risk,steps whatever you did . So tell us .
1. O.C
2. Chainfired3D
3. Build.prop (editing)
4. Your opinion .
You can Thank me now .
Also you can increase max CPU frequency of your phone and make swap
mst_murder said:
Also you can increase max CPU frequency of your phone and make swap
Click to expand...
Click to collapse
O.C is increasing the max CPU.
Can someone explain to how to swap...
I tried but it said that he cant locate the swap file.
Do i need unlocked boot?
Medo2 said:
Can someone explain to how to swap...
I tried but it said that he cant locate the swap file.
Do i need unlocked boot?
Click to expand...
Click to collapse
yUp!Stock kernel doesn't support swap partition...
swap only works in custom kernels like nAa and alfs..
u need to unlock bootloader to flash these kernels..
hit the thanks button
GingerDX + Alfs Kernel + Swap + Overclock (with setcpu profiles)
With this settings your phone should be suitable for HD Gaming
Try AtiFroyoV8
Use swapper2 from market if ur phone is at risky level
I guess I ships probably start overclocking to stop one of my games lagging lol
Sent from my X8 using XDA App
i may say that too many apps in your phone make phone lag and battery drain.
always try to put your apk in internal memory. putting apk in sdcard has so many issue like the speed of sdcard.
for rom try kuyadroid 4.5 with alfs 6.. OC to 748 and try your game. 3D games will be more smooth when you use chainfire3d
dipusen said:
Try AtiFroyoV8
Click to expand...
Click to collapse
what is this? rom?
Sent from my X8 using xda premium
I install chainfire 3d and swapper 2 from market and its really help.
Angry Birds stop laging.
I just bought a zte blade...i flashed cyanogen stable 7.1 and now i wonder how i can unlock the 512 ram..cause the phone is bought in greece and for all i know the greek ones have limited their ram by software at 256 or something like this..
So...firstly..by installing cyanogen did it already got unlocked ,and if not how do i unlock it?
Mods,please move to general...
Sent from my ZTE Blade using XDA app
you came in just to say the obvious? (I found out just 2 minutes before that i was in wrong section)
Y U NO helpfull?!?!?!
Use this to unlock your 512mb ram (Greek Blades only) - http://amphoras.co.uk/index.php/downloads/blade-tpts#g2v2a
Read the instructions on the page.
Moved to general
I dont really understand which one i should install or what these numbers mean...which one will make my phone less laggy in games? data or system?
Sent from somewhere with big effort
bakas666 said:
I dont really understand which one i should install or what these numbers mean...which one will make my phone less laggy in games? data or system?
Sent from somewhere with big effort
Click to expand...
Click to collapse
It wont make any difference to speed at all. You can choose from either Gen2 v2a, or Gen2 stock, none of the others will work for you. Either version will unlock the 512mb ram. The only difference is how the storage space is partitioned.
You want the gen2 v2a version for CyanogenMod 7, or the gen2 stock version if you ever want to install CyanogenMod 9.
They will wipe your phone. You should backup in clockworkmod first & then restore from clockworkmod afterwards. There is a small risk of bricking your phone, especially if you do it wrong, so read all the instructions.
System is where the rom is, if it's smaller than the rom that you want to use then it wont work. Data is where your apps & their saved data are.
Cache is only used for market downloads, most custom roms will redirect that to somewhere else, so you don't need much cache because it never gets used.
If you use the v2a version you'll have more room to install apps, but CyanogenMod 9 & other ICS roms won't work, because they're too big for the small system size.
If you go for the stock gen2 then you'll have the same space available for apps as you do now. Apps2Ext is a better way to get more room to install apps, download Simple2Ext from Google Play to get it working on CyanogenMod 7.
This is all assuming your Greek Blade was sold to you with Android 2.2. If it was sold to you second hand with CyanogenMod 7 installed, then it's likely that somebody else has already done it & you don't need to because you already have 512mb ram unlocked. If the Gen2 TPTs from Amphoras' page don't do anything, then it's almost certainly already been done.
Make sure that you really don't have over 256mb, download 'Android System Info', look under RAM, at the Max, if it's about 420MB, then you don't need to do anything, you've already got 512mb ram enabled.
wow wbaw....that was really helpfull...so i have gen2 ,not the 512 ram...
now...if i follow the guide and unlock more space...i will have to first backup cyanogen7 with clockwork and after i unlock the memory,i restore again through clockwork,and ill have 512 AND cyanogen7?
Also if i want to install cm9 which one you suggest?
i know it is personal choise which rom to install but i need a starting point
Sent from my Blade using XDA
bakas666 said:
wow wbaw....that was really helpfull...so i have gen2 ,not the 512 ram...
now...if i follow the guide and unlock more space...i will have to first backup cyanogen7 with clockwork and after i unlock the memory,i restore again through clockwork,and ill have 512 AND cyanogen7?
Also if i want to install cm9 which one you suggest?
i know it is personal choise which rom to install but i need a starting point
Sent from my Blade using XDA
Click to expand...
Click to collapse
As of now coldfusionx is the favorite. It had camera issues but saaransh recently posted a camera fix
thnx a lot...and wat is the max cpu freq. i can set?
Sent from my Blade using XDA
bakas666 said:
thnx a lot...and wat is the max cpu freq. i can set?
Sent from my Blade using XDA
Click to expand...
Click to collapse
you have to test it using setcpu whith governor at performance and try all frequences by incresing step by step
Send from my ZTE Blade!
Gokh said:
you have to test it using setcpu whith governor at performance and try all frequences by incresing step by step
Send from my ZTE Blade!
Click to expand...
Click to collapse
Nearly all blades can remain stable at 710 MHz. However some, (like mine and karthiknr's) are stable at 748 too.
Ans while testing, DO NOT CHECK THE SET ON BOOT options
QuantumFoam said:
Nearly all blades can remain stable at 710 MHz. However some, (like mine and karthiknr's) are stable at 748 too.
Ans while testing, DO NOT CHECK THE SET ON BOOT options
Click to expand...
Click to collapse
Mine work also at 748 but I know blade which freeze at 675.
Send from my ZTE Blade!
wbaw said:
You want the gen2 v2a version for CyanogenMod 7, or the gen2 stock version if you ever want to install CyanogenMod 9.
If you use the v2a version you'll have more room to install apps, but CyanogenMod 9 & other ICS roms won't work, because they're too big for the small system size.
If you go for the stock gen2 then you'll have the same space available for apps as you do now. Apps2Ext is a better way to get more room to install apps, download Simple2Ext from Google Play to get it working on CyanogenMod 7.
Click to expand...
Click to collapse
can you please specify more something?
you said that if i want to install cm9/ics i have to get v2a but then you say that it wont work on v2a.. :S so which one i need?
Gokh said:
Mine work also at 748 but I know blade which freeze at 675.
Send from my ZTE Blade!
Click to expand...
Click to collapse
That is so weird!
bricked and de-bricked lets go again
QuantumFoam said:
As of now coldfusionx is the favorite. It had camera issues but saaransh recently posted a camera fix
Click to expand...
Click to collapse
can you post or send me a pm with how to fix the cam problem in ColdfusionX ? when i start the cam app, it shoots photos normally...saves normally...but screen wont or will will work partially......otherwise great rom...
Just flash this via cwm(credits : kahush)
https://hotfile.com/dl/154509589/6aad98e/Pre-CM9-AOKP-REMIX-RC6.1fix-BLADE-full-signed.zip.html
Btw cwm in auto correct is cement. Lol
i flashed it..and google play doensnt work now...
reflashing minigapps....
after flashing minigapps...it got bricked...-.-