What happen on my sgy???
Cannot install rom and cannot restore rom.
updated:
end... i flash again my GalY with odin...
Sent from my MT25i using xda app-developers app
original galaxy y? maybe to flash with odin i think to get normal again
Use cwm it will work
Globally recognised and certified NOOB
SGYAndroid110212 said:
What happen on my sgy???
Cannot install rom and cannot restore rom.
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
Bro!! It's Samsung STOCK Recovery. You need to have Clockworkmod Recovery in order to flash custom roms & perform backups & restore operation. Just search for Clockworkmod recovery for SGY on Google or Here... You'll find one for you!!!
Sent Via XDA Premium
Reason:
U formatted your system, cache, data as ext4..
Samsung android stock recovery was programmed to read /cache partition as rfs but now you have ext4 /cache...
so recovery can't mount it
use cwm recovery......
Same reason for charging battery bug while device is switched off because our system is formatted as ext4
Globally recognised and certified NOOB
ocoot said:
original galaxy y? maybe to flash with odin i think to get normal again
Click to expand...
Click to collapse
i want to install rom with cwm, but after that appear
E:failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
cannot restore rom from cwm... :crying:
SGYAndroid110212 said:
i want to install rom with cwm, but after that appear
E:failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
cannot restore rom from cwm... :crying:
Click to expand...
Click to collapse
Flash stock first with odiin and then install custrom it will work
Globally recognised and certified NOOB
SGYAndroid110212 said:
What happen on my sgy???
Cannot install rom and cannot restore rom.
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
Just change your sdcard... The same problem happened to me long time ago...
Related
I Use Odin 1.7 Flash My SGS with I9000DXJPE Sucuess But Phone Dead...(cannot go in Recovery Mode)
but if i reflash with I9000XWJM7 Sucuess and my phone is Reborn.
why i can't flash with froyo 2.2 with this I9000DXJPE firmware?
anything wrong step i do?
ngagegames said:
I Use Odin 1.7 Flash My SGS with I9000DXJPE Sucuess But Phone Dead...(cannot go in Recovery Mode)
but if i reflash with I9000XWJM7 Sucuess and my phone is Reborn.
why i can't flash with froyo 2.2 with this I9000DXJPE firmware?
anything wrong step i do?
Click to expand...
Click to collapse
I think that you need to flash DXJPE with 513.pit with re-partition checked.
i will try it...thank you
[Ramad] said:
I think that you need to flash DXJPE with 513.pit with re-partition checked.
Click to expand...
Click to collapse
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
ngagegames said:
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
Click to expand...
Click to collapse
I have tried DXJPE on my device and it only works with 513.pit not 512.pit(I hope you got the right pit file), try flashing it again using the 513.pit and see how it goes in the second flash, you know that the first boot takes some time, so give it time to boot.
ngagegames said:
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
Click to expand...
Click to collapse
The DXJPE is not a full package, and hence it will have this error when you flash it with odin with re-partition ticked.
Look for hardcore's DXJPA full package where it will wipe your data, and reformat all the rest of the partitions.
After that, flash the DXJPE without ticking the re-partition. You will have your phone running in no time.
Sent from my GT-I9000 using XDA App
g00ndu said:
The DXJPE is not a full package, and hence it will have this error when you flash it with odin with re-partition ticked.
Look for hardcore's DXJPA full package where it will wipe your data, and reformat all the rest of the partitions.
After that, flash the DXJPE without ticking the re-partition. You will have your phone running in no time.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You might be correct and ngagegames is flashing a one package firmware.
@ngagegames
I have the re-partition ready firmware here: http://www.multiupload.com/8T68X93AHU double click to extract and flash PDA.tar.md5 as PDA, PHONE.tar.md5 as PHONE and CSC.tar.md5 as CSC, all with 513.pit and re-partition checked, or download the package g00ndu suggested.
thank alll...i sof my problem it...thank you
DXJPE
I succesfully rooted my SGS i9000XJPB kernal version 2.6.32.9 [email protected]
ROM-FROYO,DXJPE
IM using SuperOneClickFix,Z4root
Do not root using phone,do it by ur pc,downlioad superoneclickfix at pc plug ur sgs with usb cable to do tat,it will not working if u download through sgs market Superoneclick app.Quadrant speed now is 1980.for best result empty ur phone internal memory and root it,working very fast,
BUT JUST GOT 1 problem ,i cant flash any rom,recovery mode can be use but cant flash any zip file..Anyway My SGS DXJPE rooted now was very fast like ferrari but drain oil,LOL
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
brother i have same problem any one plz help me..i do as say above...but all is vain...
irfansamsia said:
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
brother i have same problem any one plz help me..i do as say above...but all is vain...
Click to expand...
Click to collapse
Go to hardcore blogsite, and get the full package DXJPA. Then flash the DXJPE package that you have.
Sent from my GT-I9000
irfansamsia said:
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
brother i have same problem any one plz help me..i do as say above...but all is vain...
Click to expand...
Click to collapse
download a custom rom with a lag fix kernel, flash that, and then disable lagfix before flashing a stock rom..
that way you wont get that cant mount stuff..
good luck.
I had this problem last night... all i did was flash I9000UGJL2 from samfirmware with no repartition and no pit and it worked.... i dont know why.. I was reading use the 3 file odin flash but that never worked.
Probably just lucky I guess..
I've got an odd little problem with this phone. I can get it to boot up with no sweat but for some reason it doesn't recognize any internal memory (when I go to the SD section, it says 0.00B of internal memory) which means I can't download apps, among other things. I'd really like to be able to do this.
I've tried a whole host of different things but I've never been able to solve this particular problem.
I'd be interested in hearing any possible solutions.
Thanks.
i actually encountered this problem a few months ago and all i did was reflash ec07 and it seems to have fixed it
u need to just reflash the .pit file and whatever rom you were using and you should begood i had a thread about this awhile back when it happened to me.
heres my original thread about it.
http://forum.xda-developers.com/showthread.php?t=1214142
Bierce22 said:
u need to just reflash the .pit file and whatever rom you were using and you should begood i had a thread about this awhile back when it happened to me.
heres my original thread about it.
http://forum.xda-developers.com/showthread.php?t=1214142
Click to expand...
Click to collapse
That won't work with Miunia, since it doesn't have bootloaders, params, or cache (all 3 of which will be wiped if he repartitions). Bierce's suggestion is the correct one, but you are going to have to do the full stock ec07 package with the ec07 pit, repartition checked. Somehow (not sure how, without knowing what you were doing), your int-sd partition got corrupted. Either that, or you have a hardware failure on the internal flash drive. Since you can still read the drive, just not write to it, I'd imagine it is a corrupted partition.
So I tried this, according to your helpful instructions in the Dev sticky under Heimdall tutorial... I think this qualifies as following the instructions you said to do in your post.
My problem persists. If it helps, after my device is reset by Heimdall, it goes directly into the bootloader to wipe all data, but it gives a red error message: data wipe failed.
Then it reboots again, goes into stock recovery (3e) and starts with the following two errors:
E: Can't mount /dev/block/mmcblk0p1 (Invalid argument)
E: Can't mount /dev/block/mmcblk0p2 (Invalid argument)
And I thought what you suggested would have done it for sure.
none_of_the_above said:
So I tried this, according to your helpful instructions in the Dev sticky under Heimdall tutorial... I think this qualifies as following the instructions you said to do in your post.
My problem persists. If it helps, after my device is reset by Heimdall, it goes directly into the bootloader to wipe all data, but it gives a red error message: data wipe failed.
Then it reboots again, goes into stock recovery (3e) and starts with the following two errors:
E: Can't mount /dev/block/mmcblk0p1 (Invalid argument)
E: Can't mount /dev/block/mmcblk0p2 (Invalid argument)
And I thought what you suggested would have done it for sure.
Click to expand...
Click to collapse
can you go on the irc right now, i'll be on for the next hour
abby_nitewolf said:
can you go on the irc right now, i'll be on for the next hour
Click to expand...
Click to collapse
what is irc? a lot of threads ive read people say they can help and they will be on irc. What is irc? and im having the same issue.
E:Can't mount /dev/block/mmcblk0p1
(Invalid argument)
E:Can't mount /dev/block/mmcblk0p2
(No such file or directory)
stephangardner said:
what is irc? a lot of threads ive read people say they can help and they will be on irc. What is irc? and im having the same issue.
E:Can't mount /dev/block/mmcblk0p1
(Invalid argument)
E:Can't mount /dev/block/mmcblk0p2
(No such file or directory)
Click to expand...
Click to collapse
Internet Relay Chat, our hangout. Download XChat, select Freenode.net, and our channel is #Samsung-Continuum. And have you tried to repartition using the i500 pit and ec07 odex package?
or you can use this link for the irc http://webchat.freenode.net/?channels=Samsung-Continuum&uio=d4
Sent from my SCH-I400 using Tapatalk
i need help
i am very scared to repartition i need clear simple instructions in steps and web links for files to reflash DO NOT WANT TO BRICK WHILE REFLASHING PLEASE HELP AND THANKS
am using imnuts ec03 froyo rom
katypeaceperry said:
i am very scared to repartition i need clear simple instructions in steps and web links for files to reflash DO NOT WANT TO BRICK WHILE REFLASHING PLEASE HELP AND THANKS
am using imnuts ec03 froyo rom
Click to expand...
Click to collapse
Get in the irc, we are there right now, if not i can post some links later
Sent from my SCH-I400 using Tapatalk
I was using my M2 when i turned the BT on it restarted in a bootloop. And now it shows these msgs on re covery:
E:Can't mount CACHE:recovery/command
E:Can't mount CACHE:recovery/log
I've tried wiping and reflashing to no avail. Any ideas?
thiagomtl said:
I was using my M2 when i turned the BT on it restarted in a bootloop. And now it shows these msgs on re covery:
E:Can't mount CACHE:recovery/command
E:Can't mount CACHE:recovery/log
I've tried wiping and reflashing to no avail. Any ideas?
Click to expand...
Click to collapse
Try flash stock and then flash the ROM you're using again.
Already did it, as said before. SBF, bootstrap, recovery and then the error appears.
thiagomtl said:
Already did it, as said before. SBF, bootstrap, recovery and then the error appears.
Click to expand...
Click to collapse
Are you trying to restore a backup or flash the ROM completely new? After wiping my phone I had the same errors when trying to restore a backup, but it worked when I just flashed the ROM.
Hi,
I've a galaxy S4 I9505, I can't start anymore any ROM on my phone, when I try to boot the phone, it get stuck on the samsung page.
also when I open the cwm recovery i get the message:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log,
I already tried to wipe data, dalvik cache. and to format the cache. but it doesn't change anything
I also tried with custom ROM via Odin, or some other different ROMs, but I can't boot my phone yet,
Can I try something else?
Try flashing a full stock ROM with .pit
Sent from my GT-I9505 using xda app-developers app
fraibcicoi said:
Hi,
I've a galaxy S4 I9505, I can't start anymore any ROM on my phone, when I try to boot the phone, it get stuck on the samsung page.
also when I open the cwm recovery i get the message:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log,
I already tried to wipe data, dalvik cache. and to format the cache. but it doesn't change anything
I also tried with custom ROM via Odin, or some other different ROMs, but I can't boot my phone yet,
Can I try something else?
Click to expand...
Click to collapse
Flash the latest stock using odin without pit first and try woth wipe cache / dalvik
If that does not work then flash it with the correct pit
.
I already tried, I don't get any error in the installation, but it get stuck in the boot
Then try to go into recovery mode and to wipe everything cache,factory reset,dalvik's cache
update....
Flashed stock rom but when I try to make a backup it says:
Could not mount /data and unable to find cryptofooter
failed to mount '/data' (invalid argument)
...done
unable to mount storage
failed to mount '/data' (invaled argument)
full SELinux support is present.
unable to mout /data/media/TWRP/ .twrps
mtp enabled
updating partition details
failed to mount '/data' (invalid argument)
pls help me. I can't make backup so I don't dare to flash a rom....it seens it can't acces data or something?
liobeir said:
update....
Flashed stock rom but when I try to make a backup it says:
Could not mount /data and unable to find cryptofooter
failed to mount '/data' (invalid argument)
...done
unable to mount storage
failed to mount '/data' (invaled argument)
full SELinux support is present.
unable to mout /data/media/TWRP/ .twrps
mtp enabled
updating partition details
failed to mount '/data' (invalid argument)
pls help me. I can't make backup so I don't dare to flash a rom....it seens it can't acces data or something?
Click to expand...
Click to collapse
Read the instructions for flashing TWRP again.
dynospectrum said:
Read the instructions for flashing TWRP again.
Click to expand...
Click to collapse
What do you mean? I know how to flash TWRP. Flash the tar file through the AP section in odin? Can I flash it with the img file? Always did it with the tar file, never had this problem....I will check the TWRP installation guide again...
Thanks...
TWRP couldn't read my internal storage....what could have caused this? I have a lot of experience with bricked phones. I managed to flash the stock rom but yeah....I wanna flash a rom you know...
Grts
Thanks...will check this !
liobeir said:
What do you mean? I know how to flash TWRP. Flash the tar file through the AP section in odin? Can I flash it with the img file? Always did it with the tar file, never had this problem....I will check the TWRP installation guide again...
Thanks...
TWRP couldn't read my internal storage....what could have caused this? I have a lot of experience with bricked phones. I managed to flash the stock rom but yeah....I wanna flash a rom you know...
Grts
Thanks...will check this !
Click to expand...
Click to collapse
To find out why TWRP cannot read internal storage... Read TWRP instructions again