Flash My SGS with I9000DXJPE Sucuess But Phone Dead... - Galaxy S I9000 General

I Use Odin 1.7 Flash My SGS with I9000DXJPE Sucuess But Phone Dead...(cannot go in Recovery Mode)
but if i reflash with I9000XWJM7 Sucuess and my phone is Reborn.
why i can't flash with froyo 2.2 with this I9000DXJPE firmware?
anything wrong step i do?

ngagegames said:
I Use Odin 1.7 Flash My SGS with I9000DXJPE Sucuess But Phone Dead...(cannot go in Recovery Mode)
but if i reflash with I9000XWJM7 Sucuess and my phone is Reborn.
why i can't flash with froyo 2.2 with this I9000DXJPE firmware?
anything wrong step i do?
Click to expand...
Click to collapse
I think that you need to flash DXJPE with 513.pit with re-partition checked.

i will try it...thank you

[Ramad] said:
I think that you need to flash DXJPE with 513.pit with re-partition checked.
Click to expand...
Click to collapse
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same

ngagegames said:
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
Click to expand...
Click to collapse
I have tried DXJPE on my device and it only works with 513.pit not 512.pit(I hope you got the right pit file), try flashing it again using the 513.pit and see how it goes in the second flash, you know that the first boot takes some time, so give it time to boot.

ngagegames said:
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
Click to expand...
Click to collapse
The DXJPE is not a full package, and hence it will have this error when you flash it with odin with re-partition ticked.
Look for hardcore's DXJPA full package where it will wipe your data, and reformat all the rest of the partitions.
After that, flash the DXJPE without ticking the re-partition. You will have your phone running in no time.
Sent from my GT-I9000 using XDA App

g00ndu said:
The DXJPE is not a full package, and hence it will have this error when you flash it with odin with re-partition ticked.
Look for hardcore's DXJPA full package where it will wipe your data, and reformat all the rest of the partitions.
After that, flash the DXJPE without ticking the re-partition. You will have your phone running in no time.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You might be correct and ngagegames is flashing a one package firmware.
@ngagegames
I have the re-partition ready firmware here: http://www.multiupload.com/8T68X93AHU double click to extract and flash PDA.tar.md5 as PDA, PHONE.tar.md5 as PHONE and CSC.tar.md5 as CSC, all with 513.pit and re-partition checked, or download the package g00ndu suggested.

thank alll...i sof my problem it...thank you

DXJPE
I succesfully rooted my SGS i9000XJPB kernal version 2.6.32.9 [email protected]
ROM-FROYO,DXJPE
IM using SuperOneClickFix,Z4root
Do not root using phone,do it by ur pc,downlioad superoneclickfix at pc plug ur sgs with usb cable to do tat,it will not working if u download through sgs market Superoneclick app.Quadrant speed now is 1980.for best result empty ur phone internal memory and root it,working very fast,
BUT JUST GOT 1 problem ,i cant flash any rom,recovery mode can be use but cant flash any zip file..Anyway My SGS DXJPE rooted now was very fast like ferrari but drain oil,LOL

now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
brother i have same problem any one plz help me..i do as say above...but all is vain...

irfansamsia said:
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
brother i have same problem any one plz help me..i do as say above...but all is vain...
Click to expand...
Click to collapse
Go to hardcore blogsite, and get the full package DXJPA. Then flash the DXJPE package that you have.
Sent from my GT-I9000

irfansamsia said:
now my phone give error
update media,please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions
copy default media contect failed.
(i got press wipe data/factory reset)
but still same
brother i have same problem any one plz help me..i do as say above...but all is vain...
Click to expand...
Click to collapse
download a custom rom with a lag fix kernel, flash that, and then disable lagfix before flashing a stock rom..
that way you wont get that cant mount stuff..
good luck.

I had this problem last night... all i did was flash I9000UGJL2 from samfirmware with no repartition and no pit and it worked.... i dont know why.. I was reading use the 3 file odin flash but that never worked.
Probably just lucky I guess..

Related

[Q] No Internal Memory?

I've got an odd little problem with this phone. I can get it to boot up with no sweat but for some reason it doesn't recognize any internal memory (when I go to the SD section, it says 0.00B of internal memory) which means I can't download apps, among other things. I'd really like to be able to do this.
I've tried a whole host of different things but I've never been able to solve this particular problem.
I'd be interested in hearing any possible solutions.
Thanks.
i actually encountered this problem a few months ago and all i did was reflash ec07 and it seems to have fixed it
u need to just reflash the .pit file and whatever rom you were using and you should begood i had a thread about this awhile back when it happened to me.
heres my original thread about it.
http://forum.xda-developers.com/showthread.php?t=1214142
Bierce22 said:
u need to just reflash the .pit file and whatever rom you were using and you should begood i had a thread about this awhile back when it happened to me.
heres my original thread about it.
http://forum.xda-developers.com/showthread.php?t=1214142
Click to expand...
Click to collapse
That won't work with Miunia, since it doesn't have bootloaders, params, or cache (all 3 of which will be wiped if he repartitions). Bierce's suggestion is the correct one, but you are going to have to do the full stock ec07 package with the ec07 pit, repartition checked. Somehow (not sure how, without knowing what you were doing), your int-sd partition got corrupted. Either that, or you have a hardware failure on the internal flash drive. Since you can still read the drive, just not write to it, I'd imagine it is a corrupted partition.
So I tried this, according to your helpful instructions in the Dev sticky under Heimdall tutorial... I think this qualifies as following the instructions you said to do in your post.
My problem persists. If it helps, after my device is reset by Heimdall, it goes directly into the bootloader to wipe all data, but it gives a red error message: data wipe failed.
Then it reboots again, goes into stock recovery (3e) and starts with the following two errors:
E: Can't mount /dev/block/mmcblk0p1 (Invalid argument)
E: Can't mount /dev/block/mmcblk0p2 (Invalid argument)
And I thought what you suggested would have done it for sure.
none_of_the_above said:
So I tried this, according to your helpful instructions in the Dev sticky under Heimdall tutorial... I think this qualifies as following the instructions you said to do in your post.
My problem persists. If it helps, after my device is reset by Heimdall, it goes directly into the bootloader to wipe all data, but it gives a red error message: data wipe failed.
Then it reboots again, goes into stock recovery (3e) and starts with the following two errors:
E: Can't mount /dev/block/mmcblk0p1 (Invalid argument)
E: Can't mount /dev/block/mmcblk0p2 (Invalid argument)
And I thought what you suggested would have done it for sure.
Click to expand...
Click to collapse
can you go on the irc right now, i'll be on for the next hour
abby_nitewolf said:
can you go on the irc right now, i'll be on for the next hour
Click to expand...
Click to collapse
what is irc? a lot of threads ive read people say they can help and they will be on irc. What is irc? and im having the same issue.
E:Can't mount /dev/block/mmcblk0p1
(Invalid argument)
E:Can't mount /dev/block/mmcblk0p2
(No such file or directory)
stephangardner said:
what is irc? a lot of threads ive read people say they can help and they will be on irc. What is irc? and im having the same issue.
E:Can't mount /dev/block/mmcblk0p1
(Invalid argument)
E:Can't mount /dev/block/mmcblk0p2
(No such file or directory)
Click to expand...
Click to collapse
Internet Relay Chat, our hangout. Download XChat, select Freenode.net, and our channel is #Samsung-Continuum. And have you tried to repartition using the i500 pit and ec07 odex package?
or you can use this link for the irc http://webchat.freenode.net/?channels=Samsung-Continuum&uio=d4
Sent from my SCH-I400 using Tapatalk
i need help
i am very scared to repartition i need clear simple instructions in steps and web links for files to reflash DO NOT WANT TO BRICK WHILE REFLASHING PLEASE HELP AND THANKS
am using imnuts ec03 froyo rom
katypeaceperry said:
i am very scared to repartition i need clear simple instructions in steps and web links for files to reflash DO NOT WANT TO BRICK WHILE REFLASHING PLEASE HELP AND THANKS
am using imnuts ec03 froyo rom
Click to expand...
Click to collapse
Get in the irc, we are there right now, if not i can post some links later
Sent from my SCH-I400 using Tapatalk

Help; rom installation errors and boot lopping

Hi guys
Trying to fix my brother's i9000
Im getting errors trying to install any stock roms...
i have tried lots of stock roms. this log is from trying to install
GT_I9000_XXJVO_XXJVO_OXAJVO
used 512 pit and repartion and auto reboot and f.reset time
phone was locked on O2 UK i think. do i need to use bootloaders and how?
i just want to get back into anything. then root and install CM9 afterwards
phone get into download mode ok, i have endlessly search the forums and tried lots of solutions. no success
any help?
i get the following errors on restart....
^^#can't see above this line on the recovery screen#^^
your storage not prepared yet, please use UI menu for format and reboot actions.
meida files copy failed
--deleting filesystem...
E:failed to mount /data (file exists)
E:delete_data_files; Can't open mount /data
your storage not prepared yet, please use UI menu for format and reboot actions.
--updating filesystem...
verifying the filesystem. please wait.
already updated filesystem, finished
successfully updated filesystem
--wiping cache...
formatting cache...
cache wipe failed.
--Appling multi-CSC...
Installing multi-csc
applied the csc-code 'KOR'
Successfully applied multi-CSC
Click to expand...
Click to collapse
if i try formatting after those errors, i get this error
-- wiping data...
Formatting /data...
E:format_volume: rfs Format failed on /dev/block/mmcblk0p2
Formatting /dbdata...
deleting meta data
Formatting /cache...
data wipe complete.
Click to expand...
Click to collapse
on restart it endless boot looping the galaxy logo.
i found this but not sure if that will help.
plus im confused lol
http://forum.cyanogenmod.com/topic/6433-solved-messed-up-partitions-on-internal-storage/
try flashing jvu from samfirmware with odin3 v1.82 and pit512 with repartition
after you get PASS, restart the phone and wait until some processes will complete, the phone will automatically reboot, then take out & insert back the battery.
after that continue as usual with the flashing of custom kernel like semaphore 2.5.0.
now you'll be able to install custom roms
guy7685 said:
try flashing jvu from samfirmware with odin3 v1.82 and pit512 with repartition
after you get PASS, restart the phone and wait until some processes will complete, the phone will automatically reboot, then take out & insert back the battery.
after that continue as usual with the flashing of custom kernel like semaphore 2.5.0.
now you'll be able to install custom roms
Click to expand...
Click to collapse
+1
ive done alot of flashing
can u provide link to jvu etc
only other option i have found is using adb command and remake the partitions, but i can't get premission on the phone to do that via recovery. take a look at my other thread.
http://forum.xda-developers.com/showthread.php?p=24879740&posted=1#post24879740
re:
Try this:
http://forum.xda-developers.com/showthread.php?t=845708
Hope this can halp you, but you need to root your phone and some knowlege with abd. And when root first backup /EFS folder before you try anything.
Bye and good luck.

Can you help me to solve this problem??

What happen on my sgy???
Cannot install rom and cannot restore rom.
updated:
end... i flash again my GalY with odin...
Sent from my MT25i using xda app-developers app
original galaxy y? maybe to flash with odin i think to get normal again
Use cwm it will work
Globally recognised and certified NOOB
SGYAndroid110212 said:
What happen on my sgy???
Cannot install rom and cannot restore rom.
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
Bro!! It's Samsung STOCK Recovery. You need to have Clockworkmod Recovery in order to flash custom roms & perform backups & restore operation. Just search for Clockworkmod recovery for SGY on Google or Here... You'll find one for you!!!
Sent Via XDA Premium
Reason:
U formatted your system, cache, data as ext4..
Samsung android stock recovery was programmed to read /cache partition as rfs but now you have ext4 /cache...
so recovery can't mount it
use cwm recovery......
Same reason for charging battery bug while device is switched off because our system is formatted as ext4
Globally recognised and certified NOOB
ocoot said:
original galaxy y? maybe to flash with odin i think to get normal again
Click to expand...
Click to collapse
i want to install rom with cwm, but after that appear
E:failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
cannot restore rom from cwm... :crying:
SGYAndroid110212 said:
i want to install rom with cwm, but after that appear
E:failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
cannot restore rom from cwm... :crying:
Click to expand...
Click to collapse
Flash stock first with odiin and then install custrom it will work
Globally recognised and certified NOOB
SGYAndroid110212 said:
What happen on my sgy???
Cannot install rom and cannot restore rom.
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
Just change your sdcard... The same problem happened to me long time ago...

TWRP Error 7, show Storage Internal 0 MB. Please help, wrote full description

im using ASUS Zenfone 5 as my daily driver since it was came out. before everything screwed up, im using XOSP 6.3 it was stable, but recently bugging. first time i unlock bootloader with ASUS official unlocker. My history of custom rom are CM12, Ressurection Remix LP, DirtyUnicorn, Cleanstock, XOSP. long short story. im trying tanks0412's stable Ressurection Remix, follow the precise of the instruction which is wiping System, dalvik, cache, data and internal. wiping internal which leads me to this problem, this problem has been occured 1-2 times when i did it and i succesfully fix it by flashing RR LP or somehow it fixed. but this time, it wont. its been 3 days.
- it shows error 7 when flash rom, tried to remove asserts line in the rom. wont work
- TWRP shows internal storage 0 MB. tried to remount system with terminal. wont work
- tried to update TWRP, flashing via flashboot. wont work
- tried to downgrade TWRP to 2.8.7.0 with Zenfone Asist. wont work
- tried to flash CM13.1 system image with Zenfone Asist. says okay, everything fine in bootloader. reboot to recovery, says no os installed. Cant boot to system.
Device info =
ASUS Zenfone 5
- 8 GB internal storage
- 32 GB external storage
- 2 GB RAM
- ASUS T00J/F (i forgot)
- A500CG
- TWRP 3.0.M2-0
this is my first thread. correct me if im wrong
PLEASE HELP:crying:
Same problem
I'm having the same problem.. Did you find any solution for that?
Has anyone fixed this prob yet? Im facing it right now and it say failed to mount system data and cache.
earl0325 said:
Has anyone fixed this prob yet? Im facing it right now and it say failed to mount system data and cache.
Click to expand...
Click to collapse
Did you guys tried formatting data ? Don't wipe data but format data . I ran into this problem once this fixed the problem.
@Arrvinkumar
Boomshiva said:
Did you guys tried formatting data ? Don't wipe data but format data . I ran into this problem once this fixed the problem.
@Arrvinkumar
Click to expand...
Click to collapse
I tried that also stil facing the same errors.
Try this steps carefully :
1. Wipe cache, dalvic cache, system, data and internal storage.
2. After wiping press format data and then type "yes" .
3. After formating data, now go to install and flash the ROM you want with gapps.
4. After flashing rom and gapps now reboot system.
5. First boot will take some time.
(Note: keep in mind that after wiping cache,dalvik,system,data,internal you have to do format data (which you will see in bottom right corner of wipe section) )
Whenever I install new custom rom, i use only these steps. I never encounter these problems as i always format my data.
Try this things,hope you will use your device.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
juyel92 said:
Try this steps carefully :
1. Wipe cache, dalvic cache, system, data and internal storage.
2. After wiping press format data and then type "yes" .
3. After formating data, now go to install and flash the ROM you want with gapps.
4. After flashing rom and gapps now reboot system.
5. First boot will take some time.
(Note: keep in mind that after wiping cache,dalvik,system,data,internal you have to do format data (which you will see in bottom right corner of wipe section) )
Whenever I install new custom rom, i use only these steps. I never encounter these problems as i always format my data.
Try this things,hope you will use your device.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
Click to expand...
Click to collapse
I still have the error after trying your guide.
Failed to mount '/system' (invalid argument)
Failed to mount '/data' (invalid argument)
Failed to mount '/cache' ( invalid argument)
I badly need to fix this so i can use my phone again
earl0325 said:
I still have the error after trying your guide.
Failed to mount '/system' (invalid argument)
Failed to mount '/data' (invalid argument)
Failed to mount '/cache' ( invalid argument)
I badly need to fix this so i can use my phone again
Click to expand...
Click to collapse
Okay.
First check weather its mounted or not.
To do this go to twrp recovery mode, select Mount and check [√] every option. After that try to flash the rom again. It seems like your system,data and cache is not mounted. See if that helps or not.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
juyel92 said:
Okay.
First check weather its mounted or not.
To do this go to twrp recovery mode, select Mount and check [√] every option. After that try to flash the rom again. It seems like your system,data and cache is not mounted. See if that helps or not.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
Click to expand...
Click to collapse
It is not mounted and i cannot mount it on the TWRP>mount. Even though I pressed it, it doesnt [√]
earl0325 said:
It is not mounted and i cannot mount it on the TWRP>mount. Even though I pressed it, it doesnt [√]
Click to expand...
Click to collapse
Which version of twrp you are running?
juyel92 said:
Which version of twrp you are running?
Click to expand...
Click to collapse
Im on twrp 3.0m4.0
earl0325 said:
Im on twrp 3.0m4.0
Click to expand...
Click to collapse
Do one thing just revert back to stock ROM. After that root it again, unlock bootloader and install latest twrp and flash the custom ROM again.
juyel92 said:
Do one thing just revert back to stock ROM. After that root it again, unlock bootloader and install latest twrp and flash the custom ROM again.
Click to expand...
Click to collapse
I cant even revert to stock rom because when i flash fastboot.img and recovery.img then i try to enter recovery it leads me to twrp not the stock. Btw im the one your helping in the RR Nougat thread of tank
In twrp go to advanced -> select data -> change filesystem type and change it to f2fs and then ext4 after that. Do that with all the partitions
Adrao123 said:
In twrp go to advanced -> select data -> change filesystem type and change it to f2fs and then ext4 after that. Do that with all the partitions
Click to expand...
Click to collapse
Still didn't fixed the problem sir.
earl0325 said:
I tried that also stil facing the same errors.
Click to expand...
Click to collapse
Flash original kernel with adb command. hope u fix it
Kevin [email protected] said:
Flash original kernel with adb command. hope u fix it
Click to expand...
Click to collapse
Whre can i get the original kernel and can u give me the code yo input to flash kernel? Thanks ill try your recommendation.
im facing the sam problem too.. anyone can help???
kurzwelll said:
im facing the sam problem too.. anyone can help???
Click to expand...
Click to collapse
In your twrp does it also say failed to mount /system,/data, and /cache (invalid argument)
earl0325 said:
In your twrp does it also say failed to mount /system,/data, and /cache (invalid argument)
Click to expand...
Click to collapse
yess,, i face the same problem too.. i have trying install every rom but nothing change,, it just failed prosses after all... everything is "failed to mount" in twrp

can't flash stock firmware through odin

update....
Flashed stock rom but when I try to make a backup it says:
Could not mount /data and unable to find cryptofooter
failed to mount '/data' (invalid argument)
...done
unable to mount storage
failed to mount '/data' (invaled argument)
full SELinux support is present.
unable to mout /data/media/TWRP/ .twrps
mtp enabled
updating partition details
failed to mount '/data' (invalid argument)
pls help me. I can't make backup so I don't dare to flash a rom....it seens it can't acces data or something?
liobeir said:
update....
Flashed stock rom but when I try to make a backup it says:
Could not mount /data and unable to find cryptofooter
failed to mount '/data' (invalid argument)
...done
unable to mount storage
failed to mount '/data' (invaled argument)
full SELinux support is present.
unable to mout /data/media/TWRP/ .twrps
mtp enabled
updating partition details
failed to mount '/data' (invalid argument)
pls help me. I can't make backup so I don't dare to flash a rom....it seens it can't acces data or something?
Click to expand...
Click to collapse
Read the instructions for flashing TWRP again.
dynospectrum said:
Read the instructions for flashing TWRP again.
Click to expand...
Click to collapse
What do you mean? I know how to flash TWRP. Flash the tar file through the AP section in odin? Can I flash it with the img file? Always did it with the tar file, never had this problem....I will check the TWRP installation guide again...
Thanks...
TWRP couldn't read my internal storage....what could have caused this? I have a lot of experience with bricked phones. I managed to flash the stock rom but yeah....I wanna flash a rom you know...
Grts
Thanks...will check this !
liobeir said:
What do you mean? I know how to flash TWRP. Flash the tar file through the AP section in odin? Can I flash it with the img file? Always did it with the tar file, never had this problem....I will check the TWRP installation guide again...
Thanks...
TWRP couldn't read my internal storage....what could have caused this? I have a lot of experience with bricked phones. I managed to flash the stock rom but yeah....I wanna flash a rom you know...
Grts
Thanks...will check this !
Click to expand...
Click to collapse
To find out why TWRP cannot read internal storage... Read TWRP instructions again

Categories

Resources