I was using my M2 when i turned the BT on it restarted in a bootloop. And now it shows these msgs on re covery:
E:Can't mount CACHE:recovery/command
E:Can't mount CACHE:recovery/log
I've tried wiping and reflashing to no avail. Any ideas?
thiagomtl said:
I was using my M2 when i turned the BT on it restarted in a bootloop. And now it shows these msgs on re covery:
E:Can't mount CACHE:recovery/command
E:Can't mount CACHE:recovery/log
I've tried wiping and reflashing to no avail. Any ideas?
Click to expand...
Click to collapse
Try flash stock and then flash the ROM you're using again.
Already did it, as said before. SBF, bootstrap, recovery and then the error appears.
thiagomtl said:
Already did it, as said before. SBF, bootstrap, recovery and then the error appears.
Click to expand...
Click to collapse
Are you trying to restore a backup or flash the ROM completely new? After wiping my phone I had the same errors when trying to restore a backup, but it worked when I just flashed the ROM.
Related
Hello all,
I'm having trouble flashing frankenclean 2.8nv. it gets part way through copying files and ends with: E:Can't chown/mod /system/ (Too many open files) E: Failure at line 294: installation aborted. I'm currently on 2.5nv, but I am unable to flash 2.6 or 2.8. I'm using CwM Voodoo Lagfix Recovery v2.5.1.x Red. I can restore to my last backup, but can't flash anything new.
Anyone have any suggestions or tips to get 2.8 flashed?
gremnocht said:
Hello all,
I'm having trouble flashing frankenclean 2.8nv. it gets part way through copying files and ends with: E:Can't chown/mod /system/ (Too many open files) E: Failure at line 294: installation aborted. I'm currently on 2.5nv, but I am unable to flash 2.6 or 2.8. I'm using CwM Voodoo Lagfix Recovery v2.5.1.x Red. I can restore to my last backup, but can't flash anything new.
Anyone have any suggestions or tips to get 2.8 flashed?
Click to expand...
Click to collapse
did you wipe everything??
doctorj1 said:
did you wipe everything??
Click to expand...
Click to collapse
Yes, Wiped cache, and did a factory reset, the result was the same.
Q&A... i know its useless to try, it will never happen
Hey guys.
Got a GT-I9505 and was trying to look at some custom ROMs to install, even thinking of giving the beta AOKP a go, but I ran into an issue.
I was first able to gain root access without much issue from the pre-installed firmware, worked through Odin like a treat, but after I went to install the CyanogenMod Nightly through CWM Recovery, the ROM wouldn't install. I noticed the Factory Reset through CWM and that there was an Error mounting the cache partition. I checked the mounts and only the system partition was mounted, I couldn't mount anything else.
So,after essentially bricking the phone, I used Odin and flashed the Stock Firmware back on and followed on as instructed. but the same thing happened again.
Any suggestions would be great. I have been looking at other devices to see if there had been any problems with mounting cache through CWM and to check if they had solutions, but I was coming up pretty thin with explanations. I was thinking if I format through Odin while flashing the firmware back on, that might help?
Thanks in advance, hopefully.
Tried a few more times.
third time clearing cache, the entire screen started to go more and more green.
fourth time made it reboot
fifth time just cant factory reset at all. its ridiculous.
I honestly cant say im doing something different.
Is there a way to break and actually force the cache to be wiped?
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Argh. I don't understand why I cant access/wipe my cache. is this a recovery problem?
Okay, there may be a problem with the CWM recovery. I have been looking through a few of the threads and comments in particular with Philz touch CWM recovery, and It now works. but there stillseems to be a few problems popping up with installing aosp/aokp roms. backup and restore is working fine. cache/data wipe also working. but it's quite a pain for the whole process to get it to work.
ill post the threads in a bit.
here is the AOKP rom i was referring too
http://forum.xda-developers.com/showthread.php?t=2276722
and the recovery thread that helped solves some issues
http://forum.xda-developers.com/showthread.php?t=2281367&page=18
Hi,
I've a galaxy S4 I9505, I can't start anymore any ROM on my phone, when I try to boot the phone, it get stuck on the samsung page.
also when I open the cwm recovery i get the message:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log,
I already tried to wipe data, dalvik cache. and to format the cache. but it doesn't change anything
I also tried with custom ROM via Odin, or some other different ROMs, but I can't boot my phone yet,
Can I try something else?
Try flashing a full stock ROM with .pit
Sent from my GT-I9505 using xda app-developers app
fraibcicoi said:
Hi,
I've a galaxy S4 I9505, I can't start anymore any ROM on my phone, when I try to boot the phone, it get stuck on the samsung page.
also when I open the cwm recovery i get the message:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log,
I already tried to wipe data, dalvik cache. and to format the cache. but it doesn't change anything
I also tried with custom ROM via Odin, or some other different ROMs, but I can't boot my phone yet,
Can I try something else?
Click to expand...
Click to collapse
Flash the latest stock using odin without pit first and try woth wipe cache / dalvik
If that does not work then flash it with the correct pit
.
I already tried, I don't get any error in the installation, but it get stuck in the boot
Then try to go into recovery mode and to wipe everything cache,factory reset,dalvik's cache
Hello,
i got my root access running yesterday and backed up my apps with Titanium Backup.
Then it was time to flash cm 10.2. I backed up my stock rom and then wiped the data and cache partition.
Then I tried to flash cm, but it gave me an error. Now if I start cwm, the following errors appear:
Clockworkmod Recovery v6.0.3.2
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /chace recovery/log
E: Can't mount cache/recovery/last_log
E: Can't open /cache/recovery/last_log
When I try to flash CM also errors occur.
I also can't restore my backup, the following error appears: MD5 mismatch!
Please help me, it is quite urgent
Thanks A LOT in advance.....
Best regards, Simon
E: I have the I9505, if I forgot something else, please tell me, my start in that day was so terrible and it's only 7o'clock
E2: when I try to flash CM 10.2, the following messages appear:
-- Installing: /external_sd/AROOT/cm-10.2-jfltexx.zip
E: can't mount /cache/recovery/last_install
E: failed to open last_install: Invalid argument
Finding update package....
Opening Update package....
Installing Update....
Install from sdcard complete
Then when I try rebooting it doesn't go further then the CM Logo, which spins...
re: MD5
cH33zBurGer said:
Hello,
i got my root access running yesterday and backed up my apps with Titanium Backup.
Then it was time to flash cm 10.2. I backed up my stock rom and then wiped the data and cache partition.
Then I tried to flash cm, but it gave me an error. Now if I start cwm, the following errors appear:
Clockworkmod Recovery v6.0.3.2
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /chace recovery/log
E: Can't mount cache/recovery/last_log
E: Can't open /cache/recovery/last_log
When I try to flash CM also errors occur.
I also can't restore my backup, the following error appears: MD5 mismatch!
Please help me, it is quite urgent
Thanks A LOT in advance.....
Best regards, Simon
E: I have the I9505, if I forgot something else, please tell me, my start in that day was so terrible and it's only 7o'clock
E2: when I try to flash CM 10.2, the following messages appear:
-- Installing: /external_sd/AROOT/cm-10.2-jfltexx.zip
E: can't mount /cache/recovery/last_install
E: failed to open last_install: Invalid argument
Finding update package....
Opening Update package....
Installing Update....
Install from sdcard complete
Then when I try rebooting it doesn't go further then the CM Logo, which spins...
Click to expand...
Click to collapse
Go into CWM and or Rom Manger and find the option where it says "Ignore MD5"
or something to that effect and try restoring your nandroid backup with MD5 disabled.
The best thing you can do is download TWRP custom recovery for your specific phone's
model (i9505) and restore your nandroid backup using that, it's a lot better than cwm or
rom manager, and its also all "touch" and has large tabs to click on.
TWRP has the MD5 checking as an option which you cannot miss when you are creating
a nandroid backup or restoring one.
Good luck!
I am not 100% sure if cwm/rom manager has that MD5 option which
you can enable or disable. (I forgot, been so long since I used it).
I checked and I couldn't find an option to ignore MD5. Then I looked for it in google (for cwm). There I found, that a backup can be truly corrupted which could seriously harm the phone. Therefore I don't dare trying to restore my backup with another recovery...
Is there a way to fix the problem that cwm has? With beeing unable to mount or open the stuff I mentioned in my first post and therefore somehow hindering my system to start.
Thanks so far!
Wow, this is all really strange. I now formated chache (only works when cwm is rebootet in cwm). Then the errors do not occur again. Then I formated my data again, got stuck, shut my device on and tried again, then it worked. The same thing for installing cm. First try it gets stuck, second try it works....wtf..?
Well now it runs, but I am really not content with how it worked out...
Hi,
I have problem with wiping cache. When i am doing that i get 'Failed to mount '/cache' (NO such device) '.message.
I tried to do Factory Reset but cache was wiping so long so I turned off my phone. Now, when I try to do this again i get this alert. Is there any way to fix that?
Edit: OK , I repaired it. You can delete thread
Delvekk said:
Hi,
I have problem with wiping cache. When i am doing that i get 'Failed to mount '/cache' (NO such device) '.message.
I tried to do Factory Reset but cache was wiping so long so I turned off my phone. Now, when I try to do this again i get this alert. Is there any way to fix that?
Edit: OK , I repaired it. You can delete thread
Click to expand...
Click to collapse
Thread closed as problem solved