This it's very much patched compared to the genokolar's cm7 kernel and it's aim is for performance/battery balance.
02032013
-revert all of net changes for fix sleep RIL while edge turned on
-update sound drivers from ics kernel
-Increase some parameters governing the random number generator. (entropy fix)
-Atmel Touch Screen driver updated by me (increased feedback,fixed the lag). Now, as good as in 2.6.32.9
-Update WiFi configs by dzo
-Some fixed for SD Card detection by dzo
-"Phone sometimes stuck on bootanimation" is fixed
10112012
-Updated VSYNC and mdp4 drivers
-Lag on Atmel TS is fixed but I'm not sure,please give me a feedback about this
03112012
- re-enabled gemini JPEG engine
29102012
- disabled gemini JPEG engine for prevent purple and red lines on JPEG
- fix in call volume on some phones
- changed some voltages for system stability. You can change voltage volues with Antutu CPU Master
- updated ext3 and ext4 drivers from HTC G2 kernel so phone don't boot on some ROM's (like WhiteLight) fixed and also set wrong file permission on some devices fixed
- changed bfq i/o from cyanogenmod kernel
- a lot of updates from cyanogenmod kernel
03102012
- fixed 720p video recording
- disabled haptic feedback for softkeys by default. You can enable this with X5 Settings (in attachments)
30092012.2
- fix for bluetooth problems
- some video/screen problems fixed
- removed 122Mhz,undorvolt some frq for battery
Features:
- It can overclock to 1.8 Ghz
- force phone mic with headphones & fix speakerphone echo by ksatta
- Updated smartassV2 from franco kernel
- updated video encode/decode
- Fix memory allocation for video decode
- Reduced keypad led brightness
- Reduced RAM requirement for camera
- Atmel Fixed (reduced sensitivy)
- Enable haptic feedback for soft keys
- ZRAM
- Latest kernel patches from ICS
- Internet/data speed was major improved by changing the TCP Congestion scheduler to a better one. (not tested)
- Various memory bugfixes and tweaks
Source:
https://github.com/forumber/2.6.35.7-u8800-cm7
Install:
Install zip by CWM (like ROM installation). No need wipe proccess. You can install all of 2.6.35.7 - 2.3.x ROMs (except of MIUIv3).
Thanks to:
ksatta,genokolar,dzo,stockwell,franco,ezeti,cyanogenmod team
Is this kernel already in your WhiteLight rom? if not do you recommend installing it with this kernel?
Edward Stanbury said:
Is this kernel already in your WhiteLight rom? if not do you recommend installing it with this kernel?
Click to expand...
Click to collapse
WhiteLight hasn't got this kernel yet,but you should install this kernel on WhiteLight.
forumber2 said:
WhiteLight hasn't got this kernel yet,but you should install this kernel on WhiteLight.
Click to expand...
Click to collapse
sweet as thanks mate will give it a go now what rom do you currently use for your everyday use ?
Omg! Im using miui v3 so sad wait for along time and now it's not used for miui v3
»»Sent From My U8800««
This kernel can be used in Aurora ou Elora ROMS???
Hey forumber, nice work:good:. Keep it up man. Would be great to have a really good .35 kernel for cm7.2, stockroms, lewa and mokeeOS. I take it you are building off the u8800_defconfig in Genos kernel? Just building it now, then will pull in your latest commits. Will try push some changes out to you this week.:good:
DriftGT said:
This kernel can be used in Aurora ou Elora ROMS???
Click to expand...
Click to collapse
No
PaulMilbank said:
Hey forumber, nice work:good:. Keep it up man. Would be great to have a really good .35 kernel for cm7.2, stockroms, lewa and mokeeOS. I take it you are building off the u8800_defconfig in Genos kernel? Just building it now, then will pull in your latest commits. Will try push some changes out to you this week.:good:
Click to expand...
Click to collapse
Yeap,I built it with geno's u8800_defconfig (with my changes). Thanks for your support
DriftGT said:
This kernel can be used in Aurora ou Elora ROMS???
Click to expand...
Click to collapse
please, read the first post!...aurora is kernel 3.xxx..
Ya I check that.
Thx
Kernel updated
forumber2 said:
Kernel updated
Click to expand...
Click to collapse
Are you still planning on doing a CM-7 build?
If you want this to also work on MIUI just checkout this commit https://github.com/Victor-android/kernel_huawei/commit/e8917f2bc490ec2604b439318927da6dd9837536
PaulMilbank said:
Are you still planning on doing a CM-7 build?
Click to expand...
Click to collapse
Sure
Can this work on stock roms?
Sent from my U8800 using xda premium
NeostarNeko said:
Can this work on stock roms?
Sent from my U8800 using xda premium
Click to expand...
Click to collapse
Sure;
forumber2 said:
You can install all of 2.6.35.7 - 2.3.x ROMs (except of MIUIv3).
Click to expand...
Click to collapse
Sweep2wake and 2way call recorder would be awesome =)
I'm using cm7 by ezet which is 32 based kernel...Can I instal it through that rom? Or I have to change into B5xx first...
Thanks in advance
Sent from my U8800 using xda app-developers app
iikbgsdw said:
I'm using cm7 by ezet which is 32 based kernel...Can I instal it through that rom? Or I have to change into B5xx first...
Thanks in advance
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
i want to know the same thing aswell...
thanks
Sent from my SGS-II powered by CM9
Have to be on b5xx first.
Sent from my U8800 using xda premium
Related
1-stockwell new kernel update
2-Franco 10 sept kernel
which is the best and whats different between
and which governor we must be prefer
franco test bqm
stockwell update come with deadline
and vr
??????
Only you can decide which is the best so try them. And if you bother to read the threads for the kernels you will know the differences.
Some people are so lazy...
stockwell kernel is just updated today.
I cant see any much difference between kernels,the most obvious thing is battery life.
And todays stockwell kernel update on MIUI improve my video recording quality so far.
And i obviously love the feature of lower brightness compare to the default lowest brightness.
@fbl It is not about laziness always I am afraid, sometimes you need to seek for the optimum solution which is/was tested by others, and this is not a bad thing IMHO.
and also my compass i working again
flibblesan said:
Only you can decide which is the best so try them. And if you bother to read the threads for the kernels you will know the differences.
Some people are so lazy...
Click to expand...
Click to collapse
flibblesan ı am not lazy. ı read the difference... but all of forum s person not a devoloper so we ask the devoloper's comments.. they will be test which one is the best for us ...
otherwise, post the property there does not make any sense...
---------- Post added at 05:10 PM ---------- Previous post was at 05:08 PM ----------
septavios said:
and also my compass i working again
Click to expand...
Click to collapse
my friends which kernel did you install??
In stockwells latest kernel, compass work flawlessly.
Stockwell did a hell of a job with his last kernel!
Thanks Stocky!
Brgds,
S.
Is there an easy way to combine the two? Each seem to be pretty awesome. Surely doubly awesome together
Sent from my u8800 using xda premium
mejobloggs said:
Is there an easy way to combine the two? Each seem to be pretty awesome. Surely doubly awesome together
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
franco.Kernel compiled from his github with the same toolchain he uses. dzo's latest fixes and more
It works great for me, stable and all. [email protected] without SD card IO
andreasha said:
franco.Kernel compiled from his github with the same toolchain he uses. dzo's latest fixes and more
It works great for me, stable and all. [email protected] without SD card IO
http://www.multiupload.com/YOV516KAP9
Click to expand...
Click to collapse
compass is work with 13 sept franco kernel After this application...: install stockwell new kernel + run compass +install franco kernel
now compass is run with franco kernel
andreasha said:
franco.Kernel compiled from his github with the same toolchain he uses. dzo's latest fixes and more
It works great for me, stable and all. [email protected] without SD card IO
http://www.multiupload.com/YOV516KAP9
Click to expand...
Click to collapse
Good to know, thanks for that
calmet said:
compass is work with 13 sept franco kernel After this application...: install stockwell new kernel + run compass +install franco kernel
now compass is run with franco kernel
Click to expand...
Click to collapse
Compass works fine for me atleast.
calmet said:
compass is work with 13 sept franco kernel After this application...: install stockwell new kernel + run compass +install franco kernel
now compass is run with franco kernel
Click to expand...
Click to collapse
I think i accidently did this.bcoz b4 this i cant use compass with Franco kernel.then i try use stockwell kernel.so i am sticking with stockwell kernel for now.
Sent from my u8800 using XDA Premium App
Fresh kernel! franco.Kernel-14092011+ksatta_v2
andreasha said:
Fresh kernel! franco.Kernel-14092011+ksatta_v2
http://www.multiupload.com/OU50791DC7
Click to expand...
Click to collapse
when ı install new kernel, my phone 2 times restarted in deep sleep.. ı dont touch anything and ı dontrun any process..
This is the new kernel from FFranco???
Druida69 said:
This is the new kernel from FFranco???
Click to expand...
Click to collapse
Lets call it beta or something, it not a relese from him. I've just compiled it from his source at github.
andreasha said:
franco.Kernel compiled from his github with the same toolchain he uses. dzo's latest fixes and more
It works great for me, stable and all. [email protected] without SD card IO
http://www.multiupload.com/YOV516KAP9
Click to expand...
Click to collapse
Why are you sharing this? Its not ready for release, I appreciate you for not doing this again thank you.
Sent from my IDEOS X5 using xda premium
franciscofranco said:
Why are you sharing this? Its not ready for release, I appreciate you for not doing this again thank you.
Sent from my IDEOS X5 using xda premium
Click to expand...
Click to collapse
Okay sorry!
This it's very much patched compared to the genokolar's cm7 kernel and it's aim is for performance/battery balance.
03102012
- fixed 720p video recording
- disabled haptic feedback for softkeys by default. You can enable this with X5 Settings (click me for download)
30092012.2
- fix for bluetooth problems
- some video/screen problems fixed
- removed 122Mhz,undorvolt some frq for battery
Features:
- It can overclock to 2.1 Ghz
- force phone mic with headphones & fix speakerphone echo by ksatta
- Updated smartassV2 from franco kernel
- updated video encode/decode
- Fix memory allocation for video decode
- Reduced keypad led brightness
- Reduced RAM requirement for camera
- Atmel Fixed (reduced sensitivy)
- Enable haptic feedback for soft keys
- ZRAM
- Latest kernel patches from ICS
- Internet/data speed was major improved by changing the TCP Congestion scheduler to a better one. (not tested)
- Various memory bugfixes and tweaks
- and other
Source:
https://github.com/forumber/2.6.35.7-u8800pro-cm7
Install:
Install zip by CWM (like ROM installation). No need wipe proccess. You can install all of 2.6.35.7 - 2.3.x ROMs.
Thanks to:
ksatta,genokolar,dzo,stockwell,franco,ezet
Which zip should be installed?
First or second?
dingila said:
Which zip should be installed?
First or second?
Click to expand...
Click to collapse
I put only one zip?
kernel
brother a question, how do I integrate the standard kernel in a roms I'm cooking, I'd appreciate the help. Sorry for my English google.
Installed on CM7.2, works great!
I installed it by cwm, but i have loop in boot screen. Havee you any idea?
themonio said:
I installed it by cwm, but i have loop in boot screen. Havee you any idea?
Click to expand...
Click to collapse
Your signature says that you are using huawei ideos u8150. If so, this kernel is not for your phone. It's for Huawei U8800 Pro. To fix this problem, just restore using a backup.
rankiao2330 said:
brother a question, how do I integrate the standard kernel in a roms I'm cooking, I'd appreciate the help. Sorry for my English google.
Click to expand...
Click to collapse
Are you working on a ROM?
roms
forumber2 said:
Are you working on a ROM?
Click to expand...
Click to collapse
una lewaos y una miui
Yes friend! I have u8800pro! I resolved the problem by remove the battery and reflashing the kernel! This is a great job! Now my phone works 100% fine!
Inviato dal mio U8800pro con Tapatalk 2
is this kernel better and more stable than geno's 2.6.35.7 kernel found on Kalo's rom and others?I am using Kalo's rom,is there any impovement or bugs on forumber kernel?
korekore1 said:
is this kernel better and more stable than geno's 2.6.35.7 kernel found on Kalo's rom and others?I am using Kalo's rom,is there any impovement or bugs on forumber kernel?
Click to expand...
Click to collapse
This kernel based on geno's kernel. I can't say anything about comparison because I didn't test Kalo's ROM.I tested it on B528 (Offical Huawei ROM,as same as Kalo's ROM) and I haven't encountered any problems. Can you write Kalo's default kernel's information?
rankiao2330 said:
una lewaos y una miui
Click to expand...
Click to collapse
You can do with bootimg tools,or abootimg,or dsixda kitchen. Please speak English
forumber2 said:
This kernel based on geno's kernel. I can't say anything about comparison because I didn't test Kalo's ROM.I tested it on B528 (Offical Huawei ROM,as same as Kalo's ROM) and I haven't encountered any problems. Can you write Kalo's default kernel's information?
You can do with bootimg tools,or abootimg,or dsixda kitchen. Please speak English
Click to expand...
Click to collapse
thanks to MIUI it can integrate standard, but in no porq lewaos not know where this file boot.img
Camera whit 720p frozen..
With this kernel the camera to 720p freezes ..
(I installed the rom cyanogen)
Lucatechno said:
With this kernel the camera to 720p freezes ..
(I installed the rom cyanogen)
Click to expand...
Click to collapse
Same thing for me - CM 7.2 with this kernel, video recording freezes.
Videorecording 720p not working
[Warning]
720p camera record not working.. image freezed
ROM: CM7 By Genokolar
Lucatechno said:
With this kernel the camera to 720p freezes ..
(I installed the rom cyanogen)
Click to expand...
Click to collapse
CrysisLTU said:
Same thing for me - CM 7.2 with this kernel, video recording freezes.
Click to expand...
Click to collapse
zchuxz3x said:
[Warning]
720p camera record not working.. image freezed
ROM: CM7 By Genokolar
Click to expand...
Click to collapse
I fixed and updated kernel
forumber2 said:
I fixed and updated kernel
Click to expand...
Click to collapse
thanks you very much!
now video recording work perfect :good:... if is possible, can you update CM7 Sources?.. genokolar not update his CM7 ROM anymore:crying: u.u
thanks you again
Kernel
forumber2 said:
I fixed and updated kernel
Click to expand...
Click to collapse
Thank you
often there are problems with stability of the data connection. When the connection is active, the icons change color from white to green and the connection start fine. however, the connection jumps continuously and recovery of the signal is very slow and frustrating. Is there a way to improve the stability? Maybe changing some parameters in build.prop? My internet experience whit this devices is mortyfing. I had some improvements with this kernel, but a further effort would be appreciated!! thanks
Here is something I have been working on and thought I would share.
It is a 3.08 kernel based on DZOs source and modified with some governer settings the way I like them, a bit of tuning of the voltages and cpu freqs, and a lot of cherry picks from different sources.
Sources:
Mine:
https://github.com/PaulMilbank/kernel_huawei.git
Build off the master branch with the u8800_defconfig if you want to compile yourself.
Where I borrowed from:
https://github.com/Blefish/android_kernel_huawei_u8800: Quite a few cherry picks from the ICS_Chocolate source.
https://github.com/virtuous/htc7x30-3.0.git: Mostly KGSL fixes from here.
https://github.com/ezeteze/u8800-kernel: Gave me an idea about how much to undervolt by.
https://github.com/dzo/kernel_huawei: Pulled some old fixes from the .35 ICS source
https://github.com/TomGiordano/kernel_huawei: Pulled some changes from the .35 ICS Source
Mostly these have been cherry picks that I integrated into my kernel and some tuning by me.
Also thanks to fjsferreira for his guide on compiling DZO source: http://forum.xda-developers.com/showthread.php?t=1577876
Everything that worked on DZOs kernel should work here and it should also fix a few annoying bugs.
Notes:
First Kernel:
The battery life is largely improved. I easily get 24 hours use and could probably get up to 2 days if I turned wifi off and turned mobile data off when I was not using it.
I have not seen the random text corruption on this kernel. I did see it a few times on the original aurora kernel.
It seems at least as smooth as the original Aurora kernel, maybe a bit smoother.
It should leak slightly less memory and handle kernel events better.
It is not magic though, you may still have the odd reboot and not everything is perfect. It should be at least as good as the original and hopefully a lot better.
Not so much distortion over back speaker.
Added SIO cpu scheduler.
07/10/2012 update kernel#22:
Swap and Zram enabled, need to test.
1.8ghz is back
368mhz minimum clock.
13/10/2012 update kernel #54
Some CAF and Huawei pro wifi code for testing.
Changed readahead (may need to wipe cache, dalvic cache for this, seems to cause some apps to force close without those wipes.)
Couple more KGSL tweaks
Couple of Bluetooth tweaks.
14/10/2012 update kernel #55
Revert most wifi changes, I am still getting wifi sticking on, will likely have another revert here too.
Reduce readahead some more, please wipe cache, dalvic cache and fix permissions when flashing after this change.
fix a line of code I forgot to add
Revert a franco change.
Boost lowmwmory killer values to hold a bit more ram free and kill appps/background processes a little earlier.
SuperStock Kernel
Test kernel for those with issues. Just latest DZO config, latest DZO source fresh from his github, no CAF or Franco changes
Undervolt from 308 Kernel
368mhz minimum, might need to set this to 245 to match DZO kernel
lowmemorykiller updated
swap and zram enabled.
Hopefully this should show where issues are occurring in my other kernel.
If you get a reboot, do the following from a terminal or over adb:
Code:
su
cat /dev/block/mmcblk0p7 > /sdcard/crash.txt
Then post the crash file (if it has anything in it) here.
Get it Here:
07/10/2012 Kernel #22: http://www.mediafire.com/?o5niwi1jb73j2jn
13/10/2012 update #54: http://www.mediafire.com/?ih5iy936irt326i
14/10/2012 update #55: http://www.mediafire.com/?u29faeh4v1l0sfw
SuperStock Kernel: http://www.mediafire.com/?67o0y9kc2956fy1
Works in Aurora and Miui, I tried it in AOKP, but it did not boot so something went wrong there, not sure what yet.
Will update here and on GitHub too as I make more changes.
Cheers
Paul
PaulMilbank said:
Here is something I have been working on and thought I would share.
It is a 3.08 kernel based on DZOs source and modified with some governer settings the way I like them, a bit of tuning of the voltages and cpu freqs, and a lot of cherry picks from different sources.
Sources:
Mine:
https://github.com/PaulMilbank/kernel_huawei.git
Build off the master branch with the u8800_defconfig if you want to compile yourself.
Where I copied from:
https://github.com/Blefish/android_kernel_huawei_u8800: Quite a few cherry picks from the ICS_Chocolate source
https://github.com/virtuous/htc7x30-3.0.git
Click to expand...
Click to collapse
Please can u explain the changes in more detail? and where is download link?
Sorry, posted instead of hitting the preview button. Everything up now.
Is it possible to provide only the Kernel update?
Can we undervolt even more?
Actually just noticed... since u modified only the kernel, why you post the whole ROM?
Sent from my U8800
firstly, thank you so much!
I just want to request a tuning in camera, cause camera on aurora 4.1a is a little bit slow (it's delay like 0.3s and blurry as hell:crying
AceDroidX said:
Can we undervolt even more?
Actually just noticed... since u modified only the kernel, why you post the whole ROM?
Sent from my U8800
Click to expand...
Click to collapse
yea, why is that?
EDIT
Ive just saw this
I will sort out an anykernel updater soon, but until then I have put it into Aurora 4.1 with all the updates applied and Geno's Miui 2.9.14.
Click to expand...
Click to collapse
Thanks to you, the screen tearing problem that I had on DZO's 4.1 ICS is gone.
Thank you!
Sorry guys, as it says, will sort out a kernel updater soon, just need a little time. I just already had the roms I had been testing with.
Sent from my U8800 using xda premium
Unicorn9x said:
firstly, thank you so much!
I just want to request a tuning in camera, cause camera on aurora 4.1a is a little bit slow (it's delay like 0.3s and blurry as hell:crying
Click to expand...
Click to collapse
Is this just on my kernel or the original Aurora too? have you tried tap to focus or holding the button down until the square goes green to show it is focussed? Should not be blurry if it is focussed correctly.
Anykernel updater posted.
can you try to compile JB source from code Aurora with this kernel. it might get quite stable now.
Thanks Paul your kernel + init.d tweaks = super silky smooth ui great work mate
Glad it is helping people. What init.d tweaks did you use?
Also I won't be compiling roms from source. I don't have the hardware to do it. Kernels are about my limit.
I get random touches in the right edge of the screen with this kernel. Synaptics digitizer.
PaulMilbank said:
Glad it is helping people. What init.d tweaks did you use?
Also I won't be compiling roms from source. I don't have the hardware to do it. Kernels are about my limit.
Click to expand...
Click to collapse
I used zephyr1988's one, I only just realized he updated it to work with the latest version of aurora
Link: http://forum.xda-developers.com/showpost.php?p=27398688&postcount=1
faekplastik3s said:
I get random touches in the right edge of the screen with this kernel. Synaptics digitizer.
Click to expand...
Click to collapse
Not sure about this, have not changed anything with the synaptics driver. If it worked in DZOs kernel, it should work here.
so if u want to use on aurore i only need to download the file on the first page and your kernel is already there?
Can I use this kernel on Elora ROM?
I was waiting for any kernel!!
Already testing and tearing screen problem gone, WiFi is super fast! You have done really great job!
Huawei u8800 - Tapatalked
CM10 JellyBean 4.1.2 build for Acer Iconia A500 (picasso)
All thanks to :
- waydownsouth
- CyanogenMod
Whats not working:
- Face unlock
Features
- CPU overclock to 1.5GHz
- BFQ, SIO, VR I/O Scheduler
- Lulzactive governor
- CIFS Build in
- ISO9660
- Native NTFS [Read only] USB Mass Storage Watcher OTG for Write
- USB LAN driver
- USB audio
- Voodoo sound
- WiFi & Bluetooth Tether
- 3GUSB Huawei
- Update wifi Driver [BCM4329 to BCMDHD]
Installation :
- Unlocked bootloader
- Flash Rom in custom recovery
- Wipe data/cache [If you are coming from another ROM]
- Flash ROM
- Flash Gapps
- Reboot
Screenshort 1
Screenshort 2
CM Changelog :
review.cyanogenmod.com
Build 3 Changelog :
- Fixed mic.
- USB LAN driver [ [Have been confirmed from Shieldbreaker ]
- Enabled WiFi & Bluetooth Tether
- Add Lulzactive governor
- Voodoo sound [Testing] [Tell me if it does not work]
Build 2 Changelog :
- Update wifi Driver [BCM4329 to BCMDHD]
- 3G huawei [Not tested]
- USB Audio [Have been confirmed from Czayen
- Sync from CM10 Stable
Build 1 Changelog :
- Initial release.
Download ROM:
Build 3 : cm-10-20121122-UNOFFICIAL-a500.zip
Build 2 : cm-10-20121114-UNOFFICIAL-a500.zip
Build 1 : cm-10-20121027-UNOFFICIAL-a500.zip
Download Gapps:
Jelly Bean Gapps 20121011
CM Source : https://github.com/CyanogenMod
My source : https://github.com/PlayOSS-Dev
Thanks to :
- waydownsouth
- CyanogenMod
Awesome work
Indeed, great ROM! Thanks for sharing! Quite a bite faster than the other JB ROMs around.
Best regards, maris
what about SODs? Defeated?
No SOD yet (since yetserday evening).
Best regards, maris
but how did you flash it yesterday if this thread is posted today?
You use EGL libraries from which firmware?
Filatov.p said:
but how did you flash it yesterday if this thread is posted today?
Click to expand...
Click to collapse
Was originally on different forum have been using two days no sod or memory leak so far :laugh:
blucmal said:
Was originally on different forum have been using two days no sod or memory leak so far :laugh:
Click to expand...
Click to collapse
nice, i got it. What about 3G, GPS, brightness sensor?
Skrilax_CZ said:
You use EGL libraries from which firmware?
Click to expand...
Click to collapse
I use EGL from CM10 Preview by waydownsouth and I use sysctl.conf https://github.com/PlayOSS-Dev/andr...mmit/ee5b6b45ec167e527308069327bbe17442db312f
Filatov.p said:
nice, i got it. What about 3G, GPS, brightness sensor?
Click to expand...
Click to collapse
I have not tried to use 3G, But GPS is working well.
let's see
downloading now..fingers crossed
Still having memory leak in browser. When logged in xda the screen gets a blury layer and some sites render the page slow when scrolling real fast.
The rest is really smooth but had a random reboot.
Thanks for this ROM pjsports. I have been using it now for a few days and it runs without any issue for me. It's smooth, fast and battery life is good.
GPS seem a little less sensitive (could be my location and will test further) than in ICS versions, but quite usable.
Pretty fast, thanks!!
Keep it up :good:
I keep getting an error every time I try to flash. I did the data and cache wipe.
Sent from my EVO using xda premium
guitarman584 said:
I keep getting an error every time I try to flash. I did the data and cache wipe.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
What bootloader and cwm are you using?
Sent from my A500 using Tapatalk 2
I am using an ICS bootloader that came with http://forum.xda-developers.com/showthread.php?t=1675939. Not sure what CWM i'm using. Where do I find that out?
guitarman584 said:
I am using an ICS bootloader that came with http://forum.xda-developers.com/showthread.php?t=1675939. Not sure what CWM i'm using. Where do I find that out?
Click to expand...
Click to collapse
Your bootloader and cwm are up to date. You are using thor recovery 1.7.3. You may have to redownload the ROM again. It looks like you have a corrupted ROM download.
Sent from my GT-S5570 using Tapatalk 2
Downloading
Downloading this rom, I hope it does not have any bugs. Thanks to the developers for providing A500 customers better software to continue enjoying this wonderful tablet that does not envy any other around.
Actually I'm using Ra 3.17 recovery. Thor wouldn't work correctly when I tried it. I downloaded the ROM again and tried to flash but still the same thing happened.
Deception kernel for cm based roms
Check this out
http://www.darksideteam.com/forums/98-Rom-s-y-Desarrollo-del-Moto-G-3G-(Falcon)(if u want to report bugs or talk to developer refer here)
Or
http://www.htcmania.com/showthread.php?t=880869(download it from here from google drive link)
Recommended app-synapse (https://play.google.com/store/apps/details?id=com.af.synapse)
That's the best kernel I've found until now.
Hope they get Asop version n I'll try
just tried with my xt1033...
seems not function normally....the process.phone keep forced closing...
xt1033 might not be supported at this moment?(i can't read Spanish)
ivanlau said:
just tried with my xt1033...
seems not function normally....the process.phone keep forced closing...
xt1033 might not be supported at this moment?(i can't read Spanish)
Click to expand...
Click to collapse
Do a clean install
English description is there in the link scroll down a little
This works with MultiRom?
Decepticon kernel for cm11 based rom released
http://www.darksideteam.com/Tema-KE...28f-actualizacion-continua?pid=32159#pid32159
where is the download link ?
Tracy James said:
where is the download link ?
Click to expand...
Click to collapse
Go in htcmania link u will see there Google drive link click on that link
flash this kernel decepticon_kernel_rev.1.v.0.29f_aosp-signed.zip on Spirit 1.5 result is wifi can't get IP Address.
flash this kernel decepticon kernel rev1.v.0.28f(1).zip on Spirit 1.5 result is wifi can not work/ON.
krupuk said:
flash this kernel decepticon_kernel_rev.1.v.0.29f_aosp-signed.zip on Spirit 1.5 result is wifi can't get IP Address.
flash this kernel decepticon kernel rev1.v.0.28f(1).zip on Spirit 1.5 result is wifi can not work/ON.
Click to expand...
Click to collapse
U need to manually write ip address
Go to static ip and change the ip address and then press connect
what is the correct version for 4.4.3. stock?
does it feature deep sleep s2w and dt2w with pocket mode?
I see that there is a bug in gpu overclock. After 450mhz there is 50mhz in fauxapp. Maybe it have to be 500mhz
anyone have some reccommended settings? it's bettere faux123 or synapse to set it?
fer2503 said:
anyone have some reccommended settings? it's bettere faux123 or synapse to set it?
Click to expand...
Click to collapse
I think faux 123 app is the best for kernel tweaking!
But u can try trickster too!
Since I can't post yet in development discussions I will ask here.
I'm using faux kernel with his app and sometimes I'm having camera problem. I'm using his recommended settings with 384 diskcache, by increasing this like to 512 will I resolve my problem?
Thanks
Inviato dal mio XT1032
Hi, Im Angua, Elitemovil´s beta and the creator of his jobs threads. Elitemovil is the developer of decepticon kernel for peregrine and falcon. We recommend to use Synapse for kernel configuration. Is importan take a look to the changelog to see the options that kernel has because there are a lot and continually changing. If you need suport we are at Darksideteam forum, thanks all that use this kernel
Angua 666 said:
Hi, Im Angua, Elitemovil´s beta and the creator of his jobs threads. Elitemovil is the developer of decepticon kernel for peregrine and falcon. We recommend to use Synapse for kernel configuration. Is importan take a look to the changelog to see the options that kernel has because there are a lot and continually changing. If you need suport we are at Darksideteam forum, thanks all that use this kernel
Click to expand...
Click to collapse
Hi, i have random reboot since rev2 0.9 (now i'm on 1.1) i set 96mhz-1400mhz intelliactive, hotplug, intellitermal for cpu and 450mhz for gpu with msm-adreno-tz. Any idea about?
fer2503 said:
Hi, i have random reboot since rev2 0.9 (now i'm on 1.1) i set 96mhz-1400mhz intelliactive, hotplug, intellitermal for cpu and 450mhz for gpu with msm-adreno-tz. Any idea about?
Click to expand...
Click to collapse
I respond you in darkside, you posted there too. I see faster your questions in darkside forum because tapatalk notice to me [emoji6]