Database Users

[KERNEL][2.6.35.7] forumber.kernel - 02032013

This it's very much patched compared to the genokolar's cm7 kernel and it's aim is for performance/battery balance.
02032013
-revert all of net changes for fix sleep RIL while edge turned on
-update sound drivers from ics kernel
-Increase some parameters governing the random number generator. (entropy fix)
-Atmel Touch Screen driver updated by me (increased feedback,fixed the lag). Now, as good as in 2.6.32.9
-Update WiFi configs by dzo
-Some fixed for SD Card detection by dzo
-"Phone sometimes stuck on bootanimation" is fixed
10112012
-Updated VSYNC and mdp4 drivers
-Lag on Atmel TS is fixed but I'm not sure,please give me a feedback about this
03112012
- re-enabled gemini JPEG engine
29102012
- disabled gemini JPEG engine for prevent purple and red lines on JPEG
- fix in call volume on some phones
- changed some voltages for system stability. You can change voltage volues with Antutu CPU Master
- updated ext3 and ext4 drivers from HTC G2 kernel so phone don't boot on some ROM's (like WhiteLight) fixed and also set wrong file permission on some devices fixed
- changed bfq i/o from cyanogenmod kernel
- a lot of updates from cyanogenmod kernel
03102012
- fixed 720p video recording
- disabled haptic feedback for softkeys by default. You can enable this with X5 Settings (in attachments)
30092012.2
- fix for bluetooth problems
- some video/screen problems fixed
- removed 122Mhz,undorvolt some frq for battery
Features:
- It can overclock to 1.8 Ghz
- force phone mic with headphones & fix speakerphone echo by ksatta
- Updated smartassV2 from franco kernel
- updated video encode/decode
- Fix memory allocation for video decode
- Reduced keypad led brightness
- Reduced RAM requirement for camera
- Atmel Fixed (reduced sensitivy)
- Enable haptic feedback for soft keys
- ZRAM
- Latest kernel patches from ICS
- Internet/data speed was major improved by changing the TCP Congestion scheduler to a better one. (not tested)
- Various memory bugfixes and tweaks
Source:
https://github.com/forumber/2.6.35.7-u8800-cm7
Install:
Install zip by CWM (like ROM installation). No need wipe proccess. You can install all of 2.6.35.7 - 2.3.x ROMs (except of MIUIv3).
Thanks to:
ksatta,genokolar,dzo,stockwell,franco,ezeti,cyanogenmod team

Is this kernel already in your WhiteLight rom? if not do you recommend installing it with this kernel?

Edward Stanbury said:
Is this kernel already in your WhiteLight rom? if not do you recommend installing it with this kernel?
Click to expand...
Click to collapse
WhiteLight hasn't got this kernel yet,but you should install this kernel on WhiteLight.

forumber2 said:
WhiteLight hasn't got this kernel yet,but you should install this kernel on WhiteLight.
Click to expand...
Click to collapse
sweet as thanks mate will give it a go now what rom do you currently use for your everyday use ?

Omg! Im using miui v3 so sad wait for along time and now it's not used for miui v3
»»Sent From My U8800««

This kernel can be used in Aurora ou Elora ROMS???

Hey forumber, nice work:good:. Keep it up man. Would be great to have a really good .35 kernel for cm7.2, stockroms, lewa and mokeeOS. I take it you are building off the u8800_defconfig in Genos kernel? Just building it now, then will pull in your latest commits. Will try push some changes out to you this week.:good:

DriftGT said:
This kernel can be used in Aurora ou Elora ROMS???
Click to expand...
Click to collapse
No
PaulMilbank said:
Hey forumber, nice work:good:. Keep it up man. Would be great to have a really good .35 kernel for cm7.2, stockroms, lewa and mokeeOS. I take it you are building off the u8800_defconfig in Genos kernel? Just building it now, then will pull in your latest commits. Will try push some changes out to you this week.:good:
Click to expand...
Click to collapse
Yeap,I built it with geno's u8800_defconfig (with my changes). Thanks for your support

DriftGT said:
This kernel can be used in Aurora ou Elora ROMS???
Click to expand...
Click to collapse
please, read the first post!...aurora is kernel 3.xxx..

Ya I check that.
Thx

Kernel updated

forumber2 said:
Kernel updated
Click to expand...
Click to collapse
Are you still planning on doing a CM-7 build?

If you want this to also work on MIUI just checkout this commit https://github.com/Victor-android/kernel_huawei/commit/e8917f2bc490ec2604b439318927da6dd9837536

PaulMilbank said:
Are you still planning on doing a CM-7 build?
Click to expand...
Click to collapse
Sure

Can this work on stock roms?
Sent from my U8800 using xda premium

NeostarNeko said:
Can this work on stock roms?
Sent from my U8800 using xda premium
Click to expand...
Click to collapse
Sure;
forumber2 said:
You can install all of 2.6.35.7 - 2.3.x ROMs (except of MIUIv3).
Click to expand...
Click to collapse

Sweep2wake and 2way call recorder would be awesome =)

I'm using cm7 by ezet which is 32 based kernel...Can I instal it through that rom? Or I have to change into B5xx first...
Thanks in advance
Sent from my U8800 using xda app-developers app

iikbgsdw said:
I'm using cm7 by ezet which is 32 based kernel...Can I instal it through that rom? Or I have to change into B5xx first...
Thanks in advance
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
i want to know the same thing aswell...
thanks
Sent from my SGS-II powered by CM9

Have to be on b5xx first.
Sent from my U8800 using xda premium

discontinued new kernel thread*

check out the new thread here this will get my support from now on. the kernels on this thread are discontinued
##########
Hey guys,
Recently i've been building some kernels from source and slightly editing them.
Since some people liked my custom optimus kernel i got the idea to do this!
You can make requests for things you want to see in a kernel(base kernel/features from other kernels/toolchains)
if possible provide the commit so i dont have to search for it on github
optimus communitybuild is my "flagship" the other kernels are side projects
Android Marshmallow:
-Optimus kernel r14 with OC + intelliplug [status: done] V1
-Optimus kernel r14 with OC + intelli/thunder plug + ARCH_POWER [status: done] V2
-Optimus kernel r15 community build see post for features [status: done] V3 *recommended for Marshmallow*
-SquidKernelX, kernel with lots of added features, download with UberTC 6.x or UberTC 4.9 [Status: done]
-Kalinethunter port for osprey [status: beta 2] if you you have no wifi reflash patched kernel Do not clean flash! [WIP]
Android Nougat:
-Optimus kernel r15 community build see post for features [status: done] V4 *recommended for nougat*
-Cyanogenmod 14 modified kernel with lots of stuff download R2
-Optimus r15 unofficial for nougat: ubertc4.9 ubertc6

Thanks for this, great idea
If you are interested, you can check out about modifying a kernel to include kali nethunter here- https://github.com/offensive-security/kali-nethunter/wiki/Porting-Nethunter
Maybe squid or firekernel with this?
Thanks again.
Broadcasted from Zeta Reticuli

Gravemind2015 said:
Thanks for this, great idea
If you are interested, you can check out about modifying a kernel to include kali nethunter here- https://github.com/offensive-security/kali-nethunter/wiki/Porting-Nethunter
Maybe squid or firekernel with this?
Thanks again.
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
will try to patch the squidkernel for Kali-nethunter

new release in op

awesome, what about adding KSM
will this be beneficial on the osprey?
also
maybe
bumping the kernel version 3.10.102
or just adding Firekernel Oc into the new
squidkernel r17
(like explosion kernel but using firekernels oc)
:good:

Acidfire.TM said:
awesome, what about adding KSM
will this be beneficial on the osprey?
also
maybe
bumping the kernel version 3.10.102
or just adding Firekernel Oc into the new
squidkernel r17
(like explosion kernel but using firekernels oc)
:good:
Click to expand...
Click to collapse
KSM will use cpu power so not really good for battery, but ill try
oc on squidkernel is easy so expect that

Good job mate, i think you will be swallowed by all of requests hehe, so let me help with that
could you do this with squid kernel https://github.com/sultanqasim/android_kernel_motorola_msm8916
-merge it with latest cm comits (from aug 18 to aug 24 https://github.com/CyanogenMod/android_kernel_motorola_msm8916/commits/cm-13.0 )
-add USB Fast Charge
-add westwood tcp congestion algorithm
-Underclock GPU, so it can idle at 19mhz
-add ARCH_Power
-Disable CRC-Check
-Dynamic-FSync
Thanks

HelpMeruth said:
KSM will use cpu power so not really good for battery, but ill try
oc on squidkernel is easy so expect that
Click to expand...
Click to collapse
nevermind, i have lived without ksm this long lol.
but i would would still like to see an oc'ed squid

Acidfire.TM said:
nevermind, i have lived without ksm this long lol.
but i would would still like to see an oc'ed squid
Click to expand...
Click to collapse
deleted the caf thing ?

deleted

HelpMeruth said:
will try to patch the squidkernel for Kali-nethunter
Click to expand...
Click to collapse
As @Acidfire.TM said, you can make the squid-kali one oc'ed too. Or personally, i would like the firekernel for this (It's already overclocked so may save you some work, and I think we could use overclocked CPU and GPU for various kali tools). But I know its gonna take time and various trials, so please feel free, no hurry at all.[emoji2]
Broadcasted from Zeta Reticuli

deleted by myself.
thanks for the thanks

Acidfire.TM said:
i don't want the kali thing, so
I'f your planning on making an oc squid kern.
could you release it before you merge in
the kali. i would like the simpler version
Click to expand...
Click to collapse
I was not talking about your one LOL. I was saying that it was a good idea to integrate oc to my suggested build. Or making it with firekernel (I found it really really good,and customizable). Anyways, OC with squid is a nice idea, thanks.
Broadcasted from Zeta Reticuli

@Gravemind
lol, wow I'm an idiot.
hah
sorry.

Kali nethunter gonna be seperate because its not yet ported to our Device so it's gonna take time, Ill update the thread that's was confusing
+ Have to merge some ideas because my PC can't compile a kernel in 5 sec haha
+ Gonna work the list from the op so what's on top has priority

Hi
A feature that I think lacks, in all Osprey's kernels is voltage control. If you can add this feature in squid kernel or firekernel, will be very great!
I've searched some github pages, but I don't know how github goes, so hope these links may help:
https://github.com/Swapnil133609/An...ol-initial-voltage-control-for-MSM-Snap.patch
https://github.com/SimonSickle/andr...ts/lge/msm8916-c70_rgs_ca/msm8916-c70-pm.dtsi
https://github.com/f1vefour/mako/commit/d33d71d4ad39422d435d090f05e77c4100234205
https://github.com/SimonSickle/andr...dts/lge/msm8916-y50c_trf_us/msm8916-y50c.dtsi
https://github.com/SimonSickle/andr...ts/lge/msm8916-c30_trf_us/msm8916-c30-pm.dtsi
A big thanks,
Stefano 99
Inviato dal mio MotoG3 utilizzando Tapatalk

Stefano 99 said:
Hi
A feature that I think lacks, in all Osprey's kernels is voltage control. If you can add this feature in squid kernel or firekernel, will be very great!
I've searched some github pages, but I don't know how github goes, so hope these links may help:
https://github.com/Swapnil133609/An...ol-initial-voltage-control-for-MSM-Snap.patch
https://github.com/SimonSickle/andr...ts/lge/msm8916-c70_rgs_ca/msm8916-c70-pm.dtsi
https://github.com/f1vefour/mako/commit/d33d71d4ad39422d435d090f05e77c4100234205
https://github.com/SimonSickle/andr...dts/lge/msm8916-y50c_trf_us/msm8916-y50c.dtsi
https://github.com/SimonSickle/andr...ts/lge/msm8916-c30_trf_us/msm8916-c30-pm.dtsi
A big thanks,
Stefano 99
Inviato dal mio MotoG3 utilizzando Tapatalk
Click to expand...
Click to collapse
i dont think i can do that, as stated in op i just started doing this stuff but from what i know if an other device with sanpdragon 410 has volt control its easier to port. these commits are from different soc's

testing your arch_power, OC'ed Optimus kernel.
and it's working very nice.
i will benchmark it against fire kernel 5.6
and check back in with the results.

HelpMeruth said:
i dont think i can do that, as stated in op i just started doing this stuff [emoji14] but from what i know if an other device with sanpdragon 410 has volt control its easier to port. these commits are from different soc's
Click to expand...
Click to collapse
First is a patch for snapdragon 801
Second and third are kernels of two lg smartphones that have snapdragon 410 msm8916. But seems to be the full kernel, not only the voltage control, so probably it can't be inplemented in an osprey's kernel.
I've found only these kernels.
Anyway, thanks for your reply[emoji6]
Stefano 99
Inviato dal mio MotoG3 utilizzando Tapatalk

i just benchmarked firekernel 5.6 against
the Oc'ed+arch_power Optimus r14 kernel
and with identical settings in KA.
they benchmarked with almost identical score
they both averaged about 1660 on Geekbench.
i ran multiple tests and it was pretty consistent.
the main noticeable the amount of free ram i get with firekernel , over 50% on idle. and it reclaims used RAM insanely fast upon exiting an app.
(1 GB US varient)
unfortunately with optimus r14 official and unofficial versions.
i get much less free ram around 40% in the same conditions (on idle) aswell as slow used memory reclaiming.

[Kernel] VisionZ / fast - smooth - battery-friendly

--> Moved

Reserved

Does it work with camera mod and does it allow fast picture taking with moto camera app like stock kernel does? (This is something the TurboZ kernel failed at)

Does this kernel work with 7.1.1 nougat stock?

xamindar said:
Does it work with camera mod and does it allow fast picture taking with moto camera app like stock kernel does? (This is something the TurboZ kernel failed at)
Click to expand...
Click to collapse
dchitolie said:
Does this kernel work with 7.1.1 nougat stock?
Click to expand...
Click to collapse
you can only try it. it is an beta atm. i have to do more patches and test before i release it as stable.

Where is the download link ?, thanks

AuxXxilium said:
CPU up to 1.6 & 2.2 GHz (only works on Patched roms)
GPU up to 624 MHz
ElementalX,Ondemand, Interactive, Performance, Conservative, dancedance, nightmare, powersave CPU Governors
Adreno Idler
Adreno Boost
Anykernel Installer
more...
Click to expand...
Click to collapse
This sounds interesting,
does this kernel have also voltage & undervolting support ?
Mennpiko said:
Where is the download link ?, thanks
Click to expand...
Click to collapse
Haha, you're right. I didn't even realize that there is only the source linked ...
Either it's a skill test, and one needs at least to be able to compile kernel to use this one
or maybe AuxXxilium wants to test it a bit more, before releasing it into the wild^^

Please close this thread.

[KERNEL] Unofficial Guyver Kernel Builds Thread

https://forum.xda-developers.com/showthread.php?t=3602554
this thread closed for now
but MEGAX91 doesn't stopped develop.
so i decided to build this and share with others
Download
- 08/16
kernel with only his source https://www.androidfilehost.com/?fid=817550096634793028 -> linux 3.18.54
kernel with my work https://www.androidfilehost.com/?fid=961840155545589107 -> linux 3.18.65
credits
- MEGAX91
source
- MEGAX91 https://github.com/GUYVER91/Capricorn
- me https://github.com/nazunamoe/Capricorn-1/

reserved

which version of bootloader is needed?

357662149 said:
which version of bootloader is needed?
Click to expand...
Click to collapse
mm bootloader needed
Tapatalk を使用して私の MI 5s から送信

Will we ever find out why standalone kernels won't boot on nougat bootloader?

Gotta ask, did you fix the sleep of death issue? From version 1.9 too 2.2 my phone, either in sleep or in use, will lock up after a few hours and I have to force restart it. Clock speeds and everything else is irrelevant as there was something wrong in the kernel itself. Anyways thanks for continuing the development. The kernel was amazing besides the hangs

MIUI Stock Kernel with Overclock
*Sorry for my bad english
Can you make MIUI Stock kernel with adding CPU freq 2,3 Ghz Big Core ,2,2 Ghz Little Core CPU, and GPU to 650 Mhz ? ,
I just discovered that removing Thermal config in /etc/thermal-engine-8996.conf boost performance and stability for playing emulator game like Tekken 6 and Monster Hunter P3rd (both with OpenGL), and Digimon World 4 (Dolphin Emu) yet raising CPU to 64 degree Celcius,
I just Wanna know that adding 2,3 Ghz and 650 Mhz is really boost more perfomance for emulator or not.

can you add voltage control?op3t and mi5 have this funcation,and what about miui version

Does this kernel support MIUI or LOS.
Currently I'm on 3.18.31-DragonXia_MIUI_3.9.1 kernel

xUmaRix said:
Does this kernel support MIUI or LOS.
Currently I'm on 3.18.31-DragonXia_MIUI_3.9.1 kernel
Click to expand...
Click to collapse
That one supports mi5s?

Chaninoza said:
That one supports mi5s?
Click to expand...
Click to collapse
Yes it is .
Hit thanks if it works

xUmaRix said:
Yes it is .
Hit thanks if it works
Click to expand...
Click to collapse
Thanks, but im still at MM.

xUmaRix said:
Yes it is .
Hit thanks if it works
Click to expand...
Click to collapse
Hey!
Where is the official github and/or forum thread of the DragonXia kernel for Mi5s?
Thanks!

Up for this! Sounds interesting. What are features of this kernel? Thanks for sharing btw.

xUmaRix said:
Yes it is .
Hit thanks if it works
Click to expand...
Click to collapse
I installed this. It only change kernel name and doesn't have additional features. No oc, battery fast charge, ntfs support etc like original DragonXia.
Give us a source in this case.
Shame on you

Mind building actual version ?

kael2404 said:
I installed this. It only change kernel name and doesn't have additional features. No oc, battery fast charge, ntfs support etc like original DragonXia.
Give us a source in this case.
Shame on you
Click to expand...
Click to collapse
Well i can change the governor and enable lazyplug using this kernel.

xUmaRix said:
Well i can change the governor and enable lazyplug using this kernel.
Click to expand...
Click to collapse
Sorry if i being rude,
Can you add CPU OC and GPU OC?
*Edited
I mean, add CPU Freq 2,3 and GPU Freq 650 to Dragonxia kernel.

mumiji-lo said:
Sorry if i being rude,
Can you add CPU OC and GPU OC?
*Edited
I mean, add CPU Freq 2,3 and GPU Freq 650 to Dragonxia kernel.
Click to expand...
Click to collapse
I don't think it support OC.
I think we need to ask dragonxia or whoever maintain this kernel
I can't find it on github
I got it from here https://www.androidfilehost.com/?w=files&flid=168633

xUmaRix said:
I don't think it support OC.
I think we need to ask dragonxia or whoever maintain this kernel
I can't find it on github
I got it from here https://www.androidfilehost.com/?w=files&flid=168633
Click to expand...
Click to collapse
What app is this and where can i get it? :3

[CarbonROM][OC] CarbonKernel (E6653)

Some Russian developers want to release a kernel for Xperia Z5 on CarbonRom...
CarbonKernel​
What's new in kernel:
ZZMoove governor
Bricked Hotplug
Graphics optimizations
Built with Linaro toolchain
Voltage Control
Simple MSM Thermal engine
F2FS Support
SIO and FIOPS iosched's
Adreno Idler
FRandom
How to get it?
https://github.com/x0r3d/CarbonKernel_Z5/releases
Thanks to:
@Myself5 for amazing ROM
@HaoZeke for some patches
Fransisco Franco for graphics patches
P.S I'm new on XDA and my rights enought for post on Android Development section
Source code: https://github.com/x0r3d/CarbonKernel_Z5

Kernel going out in two modifications:
Stock: in main post
Hi-Perfomance:
Differences:
OC:
Big cluster to 2.2 GHz
Little cluster to 1.7 GHz
Perfomance boost in benches up to 15%
You can get the kernel there, but the Hi-Performance kernel will be prefixed with H

Hey, @FelenAmvrosiy is waiting, I'm glad you've decided to work on the Z5. Great having you here, hope you enjoy your stay!

Thanks for your work FelenAmvrosiy.
Does the kernel work for cm-14.1? It not booting on my cm-14.1 build.
Is there an recent CarbonRom build available somewhere?

dim.on said:
Thanks for your work FelenAmvrosiy.
Does the kernel work for cm-14.1? It not booting on my cm-14.1 build.
Is there an recent CarbonRom build available somewhere?
Click to expand...
Click to collapse
Try my CarbonROM build:https://yadi.sk/d/wPEXOxQzO_-HyQ
This ROM has a working Google Pay(need fix a SafetyNet)

FelenAmvrosiy is waiting said:
Try my CarbonROM build:https://yadi.sk/d/wPEXOxQzO_-HyQ
This ROM has a working Google Pay(need fix a SafetyNet)
Click to expand...
Click to collapse
Do you have a thread for this rom? Like I wonder how it looks like and what features it has?

sarp41 said:
Do you have a thread for this rom? Like I wonder how it looks like and what features it has?
Click to expand...
Click to collapse
I don't have thread for this ROM, but this is the original CarbonRom with fix GooglePay

I've compiled your current 14.1 kernel branch.
It boots and works on cm-14.1.
However the phone isn't going into deep sleep.
There are some commits regarding powermanagement and hotplug - maybe this is related.
Any ideas?

dim.on said:
I've compiled your current 14.1 kernel branch.
It boots and works on cm-14.1.
However the phone isn't going into deep sleep.
There are some commits regarding powermanagement and hotplug - maybe this is related.
Any ideas?
Click to expand...
Click to collapse
I'm deleted a ThunderPlug in makefile, try to build!

FelenAmvrosiy is waiting said:
I'm deleted a ThunderPlug in makefile, try to build!
Click to expand...
Click to collapse
Thx - I've tested it - it's still not going into deep sleep.
However I've found the wakelock preventing the device from going into deep sleep.
It's "f9200000.ssusb".

dim.on said:
Thx - I've tested it - it's still not going into deep sleep.
However I've found the wakelock preventing the device from going into deep sleep.
It's "f9200000.ssusb".
Click to expand...
Click to collapse
I've found what's preventing the phone from going deep sleep in cm-14.1
It's commit 0b4d677c7725e341255111051ab70b7fd08953ae "Disable DWC3 LPM".
Why did you removed lpm?

dim.on said:
Thx - I've tested it - it's still not going into deep sleep.
However I've found the wakelock preventing the device from going into deep sleep.
It's "f9200000.ssusb".
Click to expand...
Click to collapse
Kernel has Boeffla's WakeLock Blocker, I add this wakelock!
Thanks for support!

dim.on said:
I've found what's preventing the phone from going deep sleep in cm-14.1
It's commit 0b4d677c7725e341255111051ab70b7fd08953ae "Disable DWC3 LPM".
Why did you removed lpm?
Click to expand...
Click to collapse
I'm will needed to connect a mouse over OTG and mouse will be disabled by LPM

FelenAmvrosiy is waiting said:
Kernel going out in two modifications:
Stock: in main post
Hi-Perfomance:
Differences:
OC:
Big cluster to 2.2 GHz
Little cluster to 1.7 GHz
Perfomance boost in benches up to 15%
You can get the kernel there, but the Hi-Performance kernel will be prefixed with H
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------
1.6(H) Version​What's new:
Fixed a deep sleep
Initial support of DSDS devices
Some optimizations of perfomance

FelenAmvrosiy is waiting said:
-----------------------------------------------------------------------------------------------------------------------------
1.6(H) Version​What's new:
Fixed a deep sleep
Initial support of DSDS devices
Some optimizations of perfomance
Click to expand...
Click to collapse
Can I flash your 1.6H kernel over your "Carbon Rom with GooglePay fix" which you adressed with a link some posts above?

sarp41 said:
Can I flash your 1.6H kernel over your "Carbon Rom with GooglePay fix" which you adressed with a link some posts above?
Click to expand...
Click to collapse
Yes!

-power button is not working sometimes when you want to wake up the phone.