1-stockwell new kernel update
2-Franco 10 sept kernel
which is the best and whats different between
and which governor we must be prefer
franco test bqm
stockwell update come with deadline
and vr
??????
Only you can decide which is the best so try them. And if you bother to read the threads for the kernels you will know the differences.
Some people are so lazy...
stockwell kernel is just updated today.
I cant see any much difference between kernels,the most obvious thing is battery life.
And todays stockwell kernel update on MIUI improve my video recording quality so far.
And i obviously love the feature of lower brightness compare to the default lowest brightness.
@fbl It is not about laziness always I am afraid, sometimes you need to seek for the optimum solution which is/was tested by others, and this is not a bad thing IMHO.
and also my compass i working again
flibblesan said:
Only you can decide which is the best so try them. And if you bother to read the threads for the kernels you will know the differences.
Some people are so lazy...
Click to expand...
Click to collapse
flibblesan ı am not lazy. ı read the difference... but all of forum s person not a devoloper so we ask the devoloper's comments.. they will be test which one is the best for us ...
otherwise, post the property there does not make any sense...
---------- Post added at 05:10 PM ---------- Previous post was at 05:08 PM ----------
septavios said:
and also my compass i working again
Click to expand...
Click to collapse
my friends which kernel did you install??
In stockwells latest kernel, compass work flawlessly.
Stockwell did a hell of a job with his last kernel!
Thanks Stocky!
Brgds,
S.
Is there an easy way to combine the two? Each seem to be pretty awesome. Surely doubly awesome together
Sent from my u8800 using xda premium
mejobloggs said:
Is there an easy way to combine the two? Each seem to be pretty awesome. Surely doubly awesome together
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
franco.Kernel compiled from his github with the same toolchain he uses. dzo's latest fixes and more
It works great for me, stable and all. [email protected] without SD card IO
andreasha said:
franco.Kernel compiled from his github with the same toolchain he uses. dzo's latest fixes and more
It works great for me, stable and all. [email protected] without SD card IO
http://www.multiupload.com/YOV516KAP9
Click to expand...
Click to collapse
compass is work with 13 sept franco kernel After this application...: install stockwell new kernel + run compass +install franco kernel
now compass is run with franco kernel
andreasha said:
franco.Kernel compiled from his github with the same toolchain he uses. dzo's latest fixes and more
It works great for me, stable and all. [email protected] without SD card IO
http://www.multiupload.com/YOV516KAP9
Click to expand...
Click to collapse
Good to know, thanks for that
calmet said:
compass is work with 13 sept franco kernel After this application...: install stockwell new kernel + run compass +install franco kernel
now compass is run with franco kernel
Click to expand...
Click to collapse
Compass works fine for me atleast.
calmet said:
compass is work with 13 sept franco kernel After this application...: install stockwell new kernel + run compass +install franco kernel
now compass is run with franco kernel
Click to expand...
Click to collapse
I think i accidently did this.bcoz b4 this i cant use compass with Franco kernel.then i try use stockwell kernel.so i am sticking with stockwell kernel for now.
Sent from my u8800 using XDA Premium App
Fresh kernel! franco.Kernel-14092011+ksatta_v2
andreasha said:
Fresh kernel! franco.Kernel-14092011+ksatta_v2
http://www.multiupload.com/OU50791DC7
Click to expand...
Click to collapse
when ı install new kernel, my phone 2 times restarted in deep sleep.. ı dont touch anything and ı dontrun any process..
This is the new kernel from FFranco???
Druida69 said:
This is the new kernel from FFranco???
Click to expand...
Click to collapse
Lets call it beta or something, it not a relese from him. I've just compiled it from his source at github.
andreasha said:
franco.Kernel compiled from his github with the same toolchain he uses. dzo's latest fixes and more
It works great for me, stable and all. [email protected] without SD card IO
http://www.multiupload.com/YOV516KAP9
Click to expand...
Click to collapse
Why are you sharing this? Its not ready for release, I appreciate you for not doing this again thank you.
Sent from my IDEOS X5 using xda premium
franciscofranco said:
Why are you sharing this? Its not ready for release, I appreciate you for not doing this again thank you.
Sent from my IDEOS X5 using xda premium
Click to expand...
Click to collapse
Okay sorry!
Related
I have made a quick patch for premature flash problem in evo kernels. I have tested it with hastarin source taken from his git repository.
This is a quick patch and somebody with more knowledge in android kernels can make a better solution.
The problem is not in premature flash but in missing flash. In desire kernels camera flash is activated twice (function msm_camera_flash in msm_camera.c) first time with low intensity (MSM_CAMERA_LED_LOW) and second time, while taking a picture, with high intensity (MSM_CAMERA_LED_HIGH). In evo kernels flash is activated only once with low intensity and because of that we only see the first activation of flash/led. Maybe someone knows from where the function msm_camera_flash is called and add a second call to that function with high intensity.
EDIT:
zImage with wifi modules on post:
h__p://forum.xda-developers.com/showpost.php?p=8635032&postcount=46
Congratulations on finding that. It makes sense a lot.
UPDATE: Everybody can now use hastarin 7.4 kernel since its updated with the code in this thread. Credit goes to mdebeljuh
http://forum.xda-developers.com/showthread.php?t=787588
Thank you very much mdebeljuh!
what we have to do with your file? can you provide how to steps?
How do i have to install this patch?
it's a kernel patch. if you don't know how to use it, you'll have to wait till one of the kernal-builders will implement it. hastarin and michyprima are very quick at adopting patches.
For testing
Ok, for testing purposes i have attached the latest hastarin kernel with patch included
mdebeljuh said:
Ok, for testing purposes i have attached the latest hastarin kernel with patch included
Click to expand...
Click to collapse
Thank you m8...will test it right now
@ Screemi
Thanks for explaining it so detailled...
Yes how do we use this patch file ?
First you need to know how to compile the kernel:
h__p://htc-linux.org/wiki/index.php?title=QuickDeveloperStartGuide#Kernel
Next you can apply the patch to the source you have downloaded from git and compile the kernel with, i hope, working flash.
You can use the patch with the next command (execute from your local git repository root directory)
patch -p1 < /path_to_patch/0001-Patch-for-premature-flash-missing-flash.patch
Thank you for your work
I can confirm, flash triggers as intended in a dark room.
Also I've let the developers know about it, Cass said he will do some tests as well.
Good work!
wow! its working! nice! thanks
please upload modules for this kernel
mdebeljuh said:
Ok, for testing purposes i have attached the latest hastarin kernel with patch included
Click to expand...
Click to collapse
Hi, thank you !
Is this based on hastarin 7.3 version?
Thanks
Sent from my HTC HD2 using XDA App
Yes it is based on hastarin sources from Friday October 15 2010
hi..
i tested this Zimage..
flash work.. but not work WIFI ..
i cant use in mdeejay froyo sense v.2.2 nextsense
mdebeljuh said:
Yes it is based on hastarin sources from Friday October 15 2010
Click to expand...
Click to collapse
OK, so I have to upgrade to 7.3 Wi-Fi module..
Thank you!
Sent from my HTC HD2 using XDA App
mannyy said:
hi..
i tested this Zimage..
flash work.. but not work WIFI ..
i cant use in mdeejay froyo sense v.2.2 nextsense
Click to expand...
Click to collapse
First you have to upgrade to version 7.3 modules..
Sent from my HTC HD2 using XDA App
iosub said:
First you have to upgrade to version 7.3 modules..
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
modules for kernel without OC
mdebeljuh said:
Ok, for testing purposes i have attached the latest hastarin kernel with patch included
Click to expand...
Click to collapse
tested..work as it should be..
but we need .ko file error on wifi..
edit..
ups didn't see post above..so this is base on 7.3 no OC..
Ok, I just realized (again, and until the next time) that Froyo Pro is the best choice for me..
But I will miss custom kernel.. I tried Alfs once, and it was all right but WiFi was not working at all. Copying Wifi libs from GDX didn't help
Can someone re-make Alfs kernel to make it work on FroyoPro? (some ramdisk changes and wifi fix)
I would be grateful... and I'm sure many others..
+1
Sent from my E15i using XDA App
+1............
It could be done but kernel should be made from cm6 core.because all kernels for x8 are made from cm7(gingerbread) core.like alfs,gdx,fxp kernel,nAa...so it would be hard,because fxp gave sources only for cm7 kernel,and most of our kernels are based on fxp kernel source.
Sent from my X8 using xda premium
nice. ....
Its preety easy.We just need to compile kernel from se source and everything should work even on eclair.
I will try and report.
Sent from my E15i using Tapatalk
oh god im waiting for Custom Kernel on Froyo sooooooooo much
and also if im on gingerbead and for example Alfs kernel when im by clockwork install custom zip with froyo i need to change kernel to stock right?
yeap, i love froyo pro and i also love alf's kernel, especially it's OC, i get by far the best results with it, fully stable 787 mhz with smartass v2 i just wish i could combine the 2.
yes yes yes +1 for a kernel for froyo
if we compile those kernels with the same Ramdisk that we have in Stock kernel, probably it should work better in Eclair and Froyo roms, right?
flash this in cwm and you will have working alfs + wifi on froyo pro
http://forum.xda-developers.com/showpost.php?p=20191172&postcount=490
Is this confirmed to work? TIA
Beans
Sent From The Arrow In My Knee
yes, i tried it everything works fine
Hefko said:
yes, i tried it everything works fine
Click to expand...
Click to collapse
WTF is this? you TRIED IT???? i am trying to stay calm so i will be brief....stop trying to scam people here making them trying stuff that just DONT WORK!!!!!
the rest of you reading this, DONT try this, it DOESNT work and will NEVER WORK!!
No, you are wrong, alfs kernel works fine with froyo pro + that fix which repairs wifi. If you want, i can make video with working kernel and froyo pro
Hefko said:
No, you are wrong, alfs kernel works fine with froyo pro + that fix which repairs wifi. If you want, i can make video with working kernel and froyo pro
Click to expand...
Click to collapse
sure make a video i would like to see that....
This is Wifi fix for the ICS kernel by shaky156.
Please see the below link for the thread
http://forum.xda-developers.com/showpost.php?p=26159482&postcount=3730
Also, i added the latest adreno drivers into the zip. So the zip contains the following things
1. Latest N1 kernel from Shaky156 (I didnt modify this)
2. Recompiled wifi kernel module
3. Latest adreno libraries from Qualcomm
Please flash it from recovery.
Note:
It has been known to work with the latest Evervolv's Aosp TexasIce and AOKP for Passion roms..
No idea about any other roms. try it on your own risk..
Edit 31/04/2012:
I have made a modified version of new Evervolv kernel. Please check it out here..
http://forum.xda-developers.com/showpost.php?p=26782507&postcount=29
SUPER!!
It's super smooth! much better performance on TexasICS! I could find wifi signal but didn't try to login. would try it later.
I can confirm I have 100% working wifi after flashing this on texasice's ics rom....and OMG TEH SMOOTH.
glad to know
glad to know it works..
the smoothness is due to the HWA changes by Shaky156 and the Qualcomm driver.
please refer to this thread for more details..
http://forum.xda-developers.com/showthread.php?t=1655475
Is it for the New sense 4 rom ?
Sent from my HTC Nexus One using Tapatalk 2
xeloni said:
Is it for the New sense 4 rom ?
Sent from my HTC Nexus One using Tapatalk 2
Click to expand...
Click to collapse
That is what is was created for, however it works on any ICS Rom..and works very well too.
WIFI doesn't work on sense 4
Must i flash just after i installed the rom or wait until it booted ?
Wifi doesn't work with MIUI either . I try to turn it on, but it will not turn on...
I didnt release the wifi module when i released the kernel for test hence why it doesnt work on some roms, sense 4 doesnt have wifi working in first place
Sent from my HTC Desire HD
I think this thread needs to be moved to the Development section so other developers could review and provide their inputs.
fake_japanese_guy said:
This is Wifi fix for the ICS kernel by shaky156.
Please see the below link for the thread
http://forum.xda-developers.com/showpost.php?p=26159482&postcount=3730
Also, i added the latest adreno drivers into the zip. So the zip contains the following things
1. Latest N1 kernel from Shaky156 (I didnt modify this)
2. Recompiled wifi kernel module
3. Latest adreno libraries from Qualcomm
Please flash it from recovery.
Note: I tested this on my N1 with TouchRecovery.
Someone please test this and tell me if its working.
Click to expand...
Click to collapse
I flashed the kernel on AOKP Milestone 5 ROM and it's very smooth. Wifi works. I set max cpu to 1190Mhz, if set above that got bootloop. Min cpu 245Mhz with no SoD.
Flashed over BCM. Wifi is working. It's super smooth and stable.
Thanks
Sent from my icy cool nexus
taodan said:
I think this thread needs to be moved to the Development section so other developers could review and provide their inputs.
Click to expand...
Click to collapse
i didnt have enough posts to put this thread in the developments section.. thats why i posted it here..
LuckyJ26 said:
Wifi doesn't work with MIUI either . I try to turn it on, but it will not turn on...
Click to expand...
Click to collapse
sorry for your trouble.
This was never meant for MIUI roms.. works only on the latest Evervolv's Aosp TexasIce and AOKP for Passion roms..
Tested on BCM. Great Kernel!
Works absolutely great on BCM CM9.
Yeah, I confirm how well its working on the BCM 9. Awesome Job
Could someone post the kernel from Shaky's 0.4 beta?
mrhohoha said:
Could someone post the kernel from Shaky's 0.4 beta?
Click to expand...
Click to collapse
The kernel is attached on the first post on this thread.
Fantastic kernel it is too. Using it on BCM ICS and in conjunction with GreenPower free I'm getting fantastic battery life.
I've 55% left after 13.5 hours with 2 hours screen on usage. Half on 3G half on wifi. Very impressed.
Sent from my Nexus One using XDA
taodan said:
The kernel is attached on the first post on this thread.
Click to expand...
Click to collapse
Erm... are you sure this is the *latest* kernel? Its dated 18/5, the one that was Shakys initial release. The 0.4 beta is dated 24/5.
Or are there no updates to the kernel? On the dev thread Shaky says there are.
Sent from my Nexus One using XDA
Do you feel the CM10 917+ Builds are less buttery or more choppy... It is due to a change in the CM source that removes VSYNC and replaces it with IOCTL that is much more power efficient.! Anyway if you want the smoothness over power until CM fixes it...
Flash this pack to revert the changes to the VSYNC.! [works with 917&918]
PS: Make sure you flash Either CM10 914 Kernel or Semaphore 2.1.0/2.1.0s or Devil before 917 , else you will have a black screen, after flashing the pack as they require kernel change.!
PS: New NOMUTEX Patch by pawitp. Download.! [Flash in Recovery. No need for kernel changes.]
ok, good to know there is a workaround for when the latest flashed cm10 is lagging, thx for that!
one question though: you only write cm10kernel or semaphore, is it not possible to use this with devil-kernel?
EDIT: 1.4.1 of DerTeufel's jellybean-kernel should work, too, shouldn't it?
it was made before the vsync-change and it is a kernel for cm10.
or is there any specific reason why devil-kernel not works for this?
EDIT2: ok, i just saw your edit right now, thx!
so everybody that wants to use cm10 WITHOUT the new vsync-change WITH devil-kernel should flash version 1.4.1 of it after flashing this mod.
greetz n thx,
sUsH
Is hellybean using VSYNC or IOCTL (knowing that devil kernel is vsync)
exadeci said:
Is hellybean using VSYNC or IOCTL (knowing that devil kernel is vsync)
Click to expand...
Click to collapse
Yes the latest version is.
yeah i experience the same problem
after flashing back to 9/14
all problem gone
I think there's bug in 17and 18 version
I read from the thread that the 918 build solves the problem... Don't quote me on this though.
so for the NOMUTEX-patch-thing it is NOT necessary to flash an older kernel, is that right?
greetz,
sUsH
Thanks nice that someone works on it!
Sent from my GT-I9000 using xda premium
sUsH667 said:
so for the NOMUTEX-patch-thing it is NOT necessary to flash an older kernel, is that right?
Click to expand...
Click to collapse
Nope kernel mod not required.
sUsH667 said:
so for the NOMUTEX-patch-thing it is NOT necessary to flash an older kernel, is that right?
greetz,
sUsH
Click to expand...
Click to collapse
mnazim said:
Nope kernel mod not required.
Click to expand...
Click to collapse
ah, ok, i get it, no kernel mod required cause there is a kernel included that gets flashed when using this zip...
so i better ask again:
can this new patch be used with other kernels?
and since there is a kernel included, the way would be
1. flash rom
2. flash patch
3. flash wished kernel
is that right?
EDIT: any idea what the patch.diff in the flashable is good for?
thx for clarification!
greetz,
sUsH
mnazim said:
Yes the latest version is.
Click to expand...
Click to collapse
What is IOCTL ?
sUsH667 said:
EDIT: any idea what the patch.diff in the flashable is good for?
Click to expand...
Click to collapse
I believe IOCTL will hold a lock on the framebuffer that is released only during the next vsync. this is the reason for microlags.
Read more Here.
AlwaysDroid said:
What is IOCTL ?
Click to expand...
Click to collapse
IOCTL is Input Output Control. It is a specific system call/api that does i/o operations in the system.
Read More.!
This it's very much patched compared to the genokolar's cm7 kernel and it's aim is for performance/battery balance.
02032013
-revert all of net changes for fix sleep RIL while edge turned on
-update sound drivers from ics kernel
-Increase some parameters governing the random number generator. (entropy fix)
-Atmel Touch Screen driver updated by me (increased feedback,fixed the lag). Now, as good as in 2.6.32.9
-Update WiFi configs by dzo
-Some fixed for SD Card detection by dzo
-"Phone sometimes stuck on bootanimation" is fixed
10112012
-Updated VSYNC and mdp4 drivers
-Lag on Atmel TS is fixed but I'm not sure,please give me a feedback about this
03112012
- re-enabled gemini JPEG engine
29102012
- disabled gemini JPEG engine for prevent purple and red lines on JPEG
- fix in call volume on some phones
- changed some voltages for system stability. You can change voltage volues with Antutu CPU Master
- updated ext3 and ext4 drivers from HTC G2 kernel so phone don't boot on some ROM's (like WhiteLight) fixed and also set wrong file permission on some devices fixed
- changed bfq i/o from cyanogenmod kernel
- a lot of updates from cyanogenmod kernel
03102012
- fixed 720p video recording
- disabled haptic feedback for softkeys by default. You can enable this with X5 Settings (in attachments)
30092012.2
- fix for bluetooth problems
- some video/screen problems fixed
- removed 122Mhz,undorvolt some frq for battery
Features:
- It can overclock to 1.8 Ghz
- force phone mic with headphones & fix speakerphone echo by ksatta
- Updated smartassV2 from franco kernel
- updated video encode/decode
- Fix memory allocation for video decode
- Reduced keypad led brightness
- Reduced RAM requirement for camera
- Atmel Fixed (reduced sensitivy)
- Enable haptic feedback for soft keys
- ZRAM
- Latest kernel patches from ICS
- Internet/data speed was major improved by changing the TCP Congestion scheduler to a better one. (not tested)
- Various memory bugfixes and tweaks
Source:
https://github.com/forumber/2.6.35.7-u8800-cm7
Install:
Install zip by CWM (like ROM installation). No need wipe proccess. You can install all of 2.6.35.7 - 2.3.x ROMs (except of MIUIv3).
Thanks to:
ksatta,genokolar,dzo,stockwell,franco,ezeti,cyanogenmod team
Is this kernel already in your WhiteLight rom? if not do you recommend installing it with this kernel?
Edward Stanbury said:
Is this kernel already in your WhiteLight rom? if not do you recommend installing it with this kernel?
Click to expand...
Click to collapse
WhiteLight hasn't got this kernel yet,but you should install this kernel on WhiteLight.
forumber2 said:
WhiteLight hasn't got this kernel yet,but you should install this kernel on WhiteLight.
Click to expand...
Click to collapse
sweet as thanks mate will give it a go now what rom do you currently use for your everyday use ?
Omg! Im using miui v3 so sad wait for along time and now it's not used for miui v3
»»Sent From My U8800««
This kernel can be used in Aurora ou Elora ROMS???
Hey forumber, nice work:good:. Keep it up man. Would be great to have a really good .35 kernel for cm7.2, stockroms, lewa and mokeeOS. I take it you are building off the u8800_defconfig in Genos kernel? Just building it now, then will pull in your latest commits. Will try push some changes out to you this week.:good:
DriftGT said:
This kernel can be used in Aurora ou Elora ROMS???
Click to expand...
Click to collapse
No
PaulMilbank said:
Hey forumber, nice work:good:. Keep it up man. Would be great to have a really good .35 kernel for cm7.2, stockroms, lewa and mokeeOS. I take it you are building off the u8800_defconfig in Genos kernel? Just building it now, then will pull in your latest commits. Will try push some changes out to you this week.:good:
Click to expand...
Click to collapse
Yeap,I built it with geno's u8800_defconfig (with my changes). Thanks for your support
DriftGT said:
This kernel can be used in Aurora ou Elora ROMS???
Click to expand...
Click to collapse
please, read the first post!...aurora is kernel 3.xxx..
Ya I check that.
Thx
Kernel updated
forumber2 said:
Kernel updated
Click to expand...
Click to collapse
Are you still planning on doing a CM-7 build?
If you want this to also work on MIUI just checkout this commit https://github.com/Victor-android/kernel_huawei/commit/e8917f2bc490ec2604b439318927da6dd9837536
PaulMilbank said:
Are you still planning on doing a CM-7 build?
Click to expand...
Click to collapse
Sure
Can this work on stock roms?
Sent from my U8800 using xda premium
NeostarNeko said:
Can this work on stock roms?
Sent from my U8800 using xda premium
Click to expand...
Click to collapse
Sure;
forumber2 said:
You can install all of 2.6.35.7 - 2.3.x ROMs (except of MIUIv3).
Click to expand...
Click to collapse
Sweep2wake and 2way call recorder would be awesome =)
I'm using cm7 by ezet which is 32 based kernel...Can I instal it through that rom? Or I have to change into B5xx first...
Thanks in advance
Sent from my U8800 using xda app-developers app
iikbgsdw said:
I'm using cm7 by ezet which is 32 based kernel...Can I instal it through that rom? Or I have to change into B5xx first...
Thanks in advance
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
i want to know the same thing aswell...
thanks
Sent from my SGS-II powered by CM9
Have to be on b5xx first.
Sent from my U8800 using xda premium