Related
Boston android ( Z71 )
kernel GINGERBREAD - 2.6.35.9-cyanomodgen (Battery Drain)
system GINGERBREAD - CM7
speed cpu 864 Mhz
battery - 22h-24h
kernel 2.6.32.9 ( Froyo ) - 2.6.32.9-SuperAosp [email protected] #2
system GINGERBREAD - CM7
speed cpu 864 Mhz
battery - 64h-70h
see 1d 4h battery 69 %
same config
identical speed both system
.. and why have you put this here ? It have nothing about Galaxy S which doesn't have an ARM v6 SoC.
180mb ram..:O
weird..
Another "wtf" thread from you.
Not good.
~drz
.Slane. said:
.. and why have you put this here ? It have nothing about Galaxy S which doesn't have an ARM v6 SoC.
Click to expand...
Click to collapse
Because my SGS with android 2.3.3 poor battery ohh
and my 2 boston is ok with kernel froyo and android 2.3.3
my HTC Desize HD is ok
the problem is kernel
What the purpose with this thread? kernel on armv6 chipset are very different... -." sorry useless i think
Sent from my GT-I9000
My20 said:
Because my SGS with android 2.3.3 poor battery ohh
Click to expand...
Click to collapse
of course but not necessary ... i think SGS have more power on Processor 1gHZ and this one factor for more consumption power i think.. but if you move on 2.3.3 with new kernel version .35 you have better batteey life..
if u have battery drain ....calibrate your battery after flashing rom
Sent from my GT-I9000
derrzredeem said:
Another "wtf" thread from you.
Not good.
~drz
Click to expand...
Click to collapse
instead "+Another "wtf"+"
trying to help, ok ?
try use another android phone, ok ?
with such people, the SGS always back
bududroid said:
of course but not necessary ... i think SGS have more power on Processor 1gHZ and this one factor for more consumption power i think.. but if you move on 2.3.3 with new kernel version .35 you have better batteey life..
if u have battery drain ....calibrate your battery after flashing rom
Sent from my GT-I9000
Click to expand...
Click to collapse
SGS android 2.3.3 Processor 1gHZ battery 18h-24h, oppss poor
try use kernel Froyo, stop here for my help, solution ?
as friend derrzredeem to help
android phone is not only SGS
My20 said:
instead "+Another "wtf"+"
trying to help, ok ?
try use another android, ok ?
with such people, the SGS always back
Click to expand...
Click to collapse
Ok your posts make no sense and your threads are useless. Just stop posting.
Same story here
http://forum.xda-developers.com/showthread.php?t=980495&page=109
PS Very confusing
mermigas said:
Same story here
http://forum.xda-developers.com/showthread.php?t=980495&page=109
PS Very confusing
Click to expand...
Click to collapse
exactly friend and another forum
My20 said:
instead "+Another "wtf"+"
trying to help, ok ?
try use another android phone, ok ?
with such people, the SGS always back
Click to expand...
Click to collapse
Hence a bit rude earlier, but it is the second thread from you which is pointless.
Instead of creating a new thread, you could do some research how to improve your battery life.
You should know, that CM7 for GT-i9000 is still in heavy development and the CM7 guys is putting their best effort to solve this issue(s) + they just got the GB source, which i think is going to improve CM7.
The simple way to get rid your drain, is to flash another ROM
derrzredeem said:
Hence a bit rude earlier, but it is the second thread from you which is pointless.
Instead of creating a new thread, you could do some research how to improve your battery life.
You should know, that CM7 for GT-i9000 is still in heavy development and the CM7 guys is putting their best effort to solve this issue(s) + they just got the GB source, which i think is going to improve CM7.
The simple way to get rid your drain, is to flash another ROM
Click to expand...
Click to collapse
know how to put the battery to operate 32h-36h
END post
solution? gets to me, can ruin your SGS
Kernel Tk-Glitch is very good kernel ... some corrections
END post
___________________
Galaxy S 16 Gb
CM7/MIUI 2.3.3
kernel +
battery 40h
Seriously, how old are you My20? Just asking.
So we're all in agreement that this was the most useless thread in XDA history?
And My20 is the most useless member in XDA history.
Furry Atom said:
So we're all in agreement that this was the most useless thread in XDA history?
And My20 is the most useless member in XDA history.
Click to expand...
Click to collapse
+1
10chars
My20 said:
solution? gets to me, can ruin your SGS
Kernel Tk-Glitch is very good kernel ... some corrections
END post
Click to expand...
Click to collapse
Flash JVK or JVB, the battery life on those is great.
btw. It's a bit hard to understand what you want. Yould you update the threadtitle?
also to all other posters on this thread:
Look, if he's trolling being offensive won't do any good. If he's honestly trying to find a solution for a problem rudeness won't help either. Pleas watch your tone or don't post. as far as I remember we're all here to help each other.
How many times is this guy going to pop up and spread his nonsense around?
Sure, the first few times it might have been comical, but now it's just sad bordering on aggravating.
i live in china, the mistakes of language please skip them
1. CPU
OMAP 3630 Ti factory frequency is 720mhz, not 1ghz
here is the Ti official link: focus.ti.c o m/pr/docs/preldetail.tsp?prelId=sc09020§ionId=594
i really appraciate the quality of Ti CPU...I'm using ms2 at 1.3ghz, compare with the factory frequency,580mhz more.
is there any danger to overclock so much?
please give me some suggestion
2.Touch screen
i don't the details about the problem that ms2 has the touch delay...
someone says that it is caused by rom, others think it's about the screen quality.
i just want to know is the ms2 in other countries have the problem?
or droid 2 have the same problem?
how to resolve the problem?
3.bootloader&bootstrap
MOTO's official rom is really ungelivable, and bootloader lock the rom...
but bootstrap can escape the bootloader and put in the rom without certification or authorizing...
so why there isn't enough rom we can use?
i know the agen2stone, but the temprature is really let me feel scared...sometimes over 50C (temprature in china and about 122F)...and i don't like the UI. the most important , it is based on the official rom...but it is much better than official rom...
expecting a2s 2.0...
3.1 CM7 AND unofficial rom
defy have already had the CM7 and MIUI...
MS2 AND DEFY both have the bootloader, to adjust roms for defy into ms2 is much easier than other way(personal thinking, may be not correct).
i'm not good at development, hoping some developers can take my suggestion to get success on the CM7 or unofficial rom for ms2...
i can't use link yet, skip the space between the c o m in the link.
thanks
1. Orig Milestone is based on TI OMAP 3430 with 550mhz processor. People overclocking it to 1,2ghz. Milestone 2 which is based on TI OMAP 3630 (as well as Droid 2) is overclocked to 1ghz, and Droid 2 Global to 1,2ghz with the same chip, and it's stock frequency set by Motorola. I think they wouldn't overclock it if there would be any danger. More dangerous to your cpu is to high vsel level and temperature
2. I bet it's a software/touchscreen drivers problem. Anyway I will report it to them with some vid samples with comparison to other devices . I hope they will fix it with next updates.
3.
so why there isn't enough rom we can use?
Click to expand...
Click to collapse
I'd love to know that as well...
mkmck said:
Milestone 2 which is based on TI OMAP 3630 (as well as Droid 2) is overclocked to 1ghz, and Droid 2 Global to 1,2ghz with the same chip
Click to expand...
Click to collapse
http://developer.motorola.com/products/droid2/ --> Motorola says Droid 2 is based on omap 3620 (I don't know the differences)
I find max frequency at 1350Mhz (with stock vsel 66) and from what I've seen in other european Milestone2, it seems to be the limit of this device.
patton82 said:
I find max frequency at 1350Mhz (with stock vsel 66) and from what I've seen in other european Milestone2, it seems to be the limit of this device.
Click to expand...
Click to collapse
Same here. Mine, with 1400 was rebooting
zhaoyihan said:
.......
MOTO's official rom is really ungelivable, and bootloader lock the rom...
......
Click to expand...
Click to collapse
I don't think a non-Chinese-speaking could get the meaning of ungelivable.
It's kind of kuso and totally Chinglish.
zhaoyihan said:
i live in china, the mistakes of language please skip them
1. CPU
OMAP 3630 Ti factory frequency is 720mhz, not 1ghz
here is the Ti official link: focus.ti.c o m/pr/docs/preldetail.tsp?prelId=sc09020§ionId=594
i really appraciate the quality of Ti CPU...I'm using ms2 at 1.3ghz, compare with the factory frequency,580mhz more.
is there any danger to overclock so much?
please give me some suggestion
2.Touch screen
i don't the details about the problem that ms2 has the touch delay...
someone says that it is caused by rom, others think it's about the screen quality.
i just want to know is the ms2 in other countries have the problem?
or droid 2 have the same problem?
how to resolve the problem?
3.bootloader&bootstrap
MOTO's official rom is really ungelivable, and bootloader lock the rom...
but bootstrap can escape the bootloader and put in the rom without certification or authorizing...
so why there isn't enough rom we can use?
i know the agen2stone, but the temprature is really let me feel scared...sometimes over 50C (temprature in china and about 122F)...and i don't like the UI. the most important , it is based on the official rom...but it is much better than official rom...
expecting a2s 2.0...
3.1 CM7 AND unofficial rom
defy have already had the CM7 and MIUI...
MS2 AND DEFY both have the bootloader, to adjust roms for defy into ms2 is much easier than other way(personal thinking, may be not correct).
i'm not good at development, hoping some developers can take my suggestion to get success on the CM7 or unofficial rom for ms2...
Click to expand...
Click to collapse
1.No need to worry about this
2.The cause is commomly considered to be the ROM itself.However, due to the BL , we can`t solve now.
3. There is a hardware checker in Milestone2, which will check the kernel everytime we boot the rom. Bootstrap just partly bypass the BL in software. STill not able to run custom kernel. So there is no real custom rom for us.
3.1 There is still some differences between their BLs. According to Mikevhl, MS2`s BL somehow locks more. But I think it`s just the matter of DEV`s effort. DEFY has many many many DEVS......while we MS2er just has MIKEVHL.........
For now, just support MIKEVHL and await him to release something
waigx said:
I don't think a non-Chinese-speaking could get the meaning of ungelivable.
It's kind of kuso and totally Chinglish.
Click to expand...
Click to collapse
ungelivable roughly means " Not work well "
Endless7 said:
1.No need to worry about this
Click to expand...
Click to collapse
Agreed,
Think about manufacture process of different CPUs which have the similar architecture.
They made from one silicon wafer but they labeled different clock rates depend on different stability levels in testing, and, this is not the frequency they designed for.
Manufacturers can also block some cores, L2-cache or something, so, that's AMD Phenom X3 and Phenom X4, some models of Intel Celeron and Pentium.
patton82 said:
http://developer.motorola.com/products/droid2/ --> Motorola says Droid 2 is based on omap 3620 (I don't know the differences)
I find max frequency at 1350Mhz (with stock vsel 66) and from what I've seen in other european Milestone2, it seems to be the limit of this device.
Click to expand...
Click to collapse
My limit is 1355Mhz with 72 vsel, 66vsel will cause force close in media playback.
Endless7 said:
ungelivable roughly means " Not work well "
Click to expand...
Click to collapse
Actually, this word came form a Chinese network language ( or slang ) "给力" which speaks just like "geli". It means energetic, very helpful or forcefulness. So "ungelivable" was made by the morphology of English words.
For example: The cheat sheet is sooooo ungelivable, I can't find anything related on it!
Congratulations, you got it.
Endless7 said:
My limit is 1355Mhz with 72 vsel, 66vsel will cause force close in media playback.
Click to expand...
Click to collapse
From the official web page from Ti, the difference between 3630 and 3620 is the 720p...3630 can play 720p originally, but 3620 wasn't...Maybe MOTO fortify it with PowerVR 530...
here is the pic:View attachment 607640
Guys i want to buy motorola defy or plus or mini which one should i buy and by the way i read tht defy has a speaker fault is tht true and in which its running is tht froyo r what...
And is defy could b overcloked and if it is thn how much and what is its chipset
And is mini avlble in india
Which 1 do i have reply pls
And currently im usng samsung galaxy y
I don't think Mini is available yet(Not in flipkart,letsbuy or ebay)?! I would say don't go for Mini go for either Defy or Defy+. If you are into MODs then I suggest go for Defy since it is almost similar to Defy+ but cheaper. However if you are not into MODs and want to stick with the stock go for Defy+. Both Defy and Defy+ can be overclocked easily to 1.2Ghz and with correct settings you may also try 1.4Ghz but 1.2 should be suffice in most cases! A Defy comes with Froyo and 800Mhz proc whereas Defy+ has 1Ghz proc and a stock GB. They have TI OMAP chipset 3610 and 3620 respectively, though both chipsets are debated to be the same with diff names.
Apart from that Defy+ have more memory(extra about 1.2GB for apps).
The Defy and Defy+ are almost identical, with the exceptions being the battery (bigger for the Defy+), stock overclocked CPU (1ghz for +), red lens only for +, Gingerbread kernel only for +.
The storage space is the same (around 1.2gb).
They have the same CPU (TI OMAP3630) despite Motorola's claims.
Trimis de pe Defy CM9
vap_66 said:
The Defy and Defy+ are almost identical, with the exceptions being the battery (bigger for the Defy+), stock overclocked CPU (1ghz for +), red lens only for +, Gingerbread kernel only for +.
The storage space is the same (around 1.2gb).
They have the same CPU (TI OMAP3630) despite Motorola's claims.
Trimis de pe Defy CM9
Click to expand...
Click to collapse
Errr the mempry management is little different bro! And new Defy has red lens!
Defy+ has got another extra 1GB for ROM ie. the ROM is not stored in the same 2GB internal memory available! An excerpt from comparision in gsmarena:
2 GB storage, 512 MB RAM 2 GB storage, 512 MB RAM, 1 GB ROM
URL: http://www.gsmarena.com/compare.php3?idPhone1=3514&idPhone2=4098
Yes, Defy+ has a red lens only, I posted that. The Defy had green and red lenses. RAM memory management is controlled by the software, so that doesn't depend on the hardware.
I don't particularly trust GSM Arena, could anyone with a Defy+ confirm the internal storage space differences?
Trimis de pe Defy CM9
I wub my defy ^^
but.. I'd get something with an unlocked bootloader ^^
Then you'll get a puppy that really flies!!
I like my defy.
Defy is easy root, easy to get into boot, as soon as you get rid of bloatware, find a good ROM its a pretty decent phone. Try and find one with red lens if you plan on flashing cm 9 (or even some cm7's).
vap_66 said:
The Defy and Defy+ are almost identical, with the exceptions being the battery (bigger for the Defy+), stock overclocked CPU (1ghz for +), red lens only for +, Gingerbread kernel only for +.
The storage space is the same (around 1.2gb).
They have the same CPU (TI OMAP3630) despite Motorola's claims.
Trimis de pe Defy CM9
Click to expand...
Click to collapse
I am curious... What the benefit of the red lens?
Anyways, I just recently purchased an unlocked Defy+ and it's a great little phone. Very responsive, amazing cellphone radio signal reception and the CrystalTalk technology is awesome. These are the main reasons why I still prefer a Moto phone over the usual slew of Androids.
http://www.cnet.com/8301-19167_1-10138219-100.html
However, the mobile hotspot feature is not working well for me at the moment...
Any ideas anyone?
vap_66 said:
Yes, Defy+ has a red lens only, I posted that. The Defy had green and red lenses. RAM memory management is controlled by the software, so that doesn't depend on the hardware.
I don't particularly trust GSM Arena, could anyone with a Defy+ confirm the internal storage space differences?
Trimis de pe Defy CM9
Click to expand...
Click to collapse
NOPE...1.2 GB Internal on Defy+ and not 1GB ROM and 2GB Internal
I knew it . Basically, the only differences are from the battery and GB kernel.
Trimis de pe Defy CM9
vap_66 said:
I knew it . Basically, the only differences are from the battery and GB kernel.
Trimis de pe Defy CM9
Click to expand...
Click to collapse
Yep that's true! Wish I knew about this forum and all the mod gyaan before I bought my Defy+ !!! Should I have known I would have bought a Defy instead!
i always prefer normal Defy. u can be sure to get a froyo-kernel! (more possibilities flashing different roms).
If the Defy+ is delivered with the newest GB-Version u can only flash GB-Kernel Roms (some Roms are only built with froyo-kernel, e.g. MIUI Pikachu).
Greetz
I installed the PVL Stock Plus on my DEFY+ red lens, but in bootmenu i set overclock, but it does not work, I set to 1.2 Ghz but it is only in 1 GHz Has anyone experienced this?
Sorry may bad english.
veneceus said:
I installed the PVL Stock Plus on my DEFY+ red lens, but in bootmenu i set overclock, but it does not work, I set to 1.2 Ghz but it is only in 1 GHz Has anyone experienced this?
Sorry may bad english.
Click to expand...
Click to collapse
Well, I can't really say why, but some roms just don't support overclock over a certain amount I think.
I've always been satisfied with 1 GHz, and plus, there's not so much difference between 1 and 1.2 on this
crappy TI OMAP processor of ours.
I'm facing some sluggish performance of my phone, I've not rooted it yet.
the problem is that when I'm playing TEMPLE RUN 2 it can not handle it while I've other phone XPERIA TIPO which have only 800MHz of Processor and still I can run play it...........
anyone out there who haven't rooted Defy+ plz answer me.....IS THAT SORT OF ISSUE YOU ARE ALSO FACING??
ALSO
anyone tell me the solution for this
( I HOPE THREAD IS IN RIGHT AREA )
Change visual quality to low
Sent from my MB526 using xda premium
Yup, change to low.
Yup, change to low. The official rom has only 350 mb usable RAM, while most custom roms have 450+. I have seen the bad performance on the official unrooted defy+.