Database Users

black screen of death

hi i just tried to upgrade my friends galaxy s from eclair to gingerbread bt it failed at odin n its stucked on black screen of death ie phone-!-pc .Now i cant set it back to download mode neither pc recognize it . i m in delimma heard abt usb jig bt i cant get it here since i m in hostel is there any other way to boot it back to download mode?
thankx

kensheen said:
hi i just tried to upgrade my friends galaxy s from eclair to gingerbread bt it failed at odin n its stucked on black screen of death ie phone-!-pc .Now i cant set it back to download mode neither pc recognize it . i m in delimma heard abt usb jig bt i cant get it here since i m in hostel is there any other way to boot it back to download mode?
thankx
Click to expand...
Click to collapse
do you have rebootet the pc?

ken2802 said:
do you have rebootet the pc?
Click to expand...
Click to collapse
yes i rebooted my pc n tired on other 2 pc too.also changed the usb cable bt no luck .

and the "downloading" screen doesnt shows up?

just hold the 3 key salute buttons to go back, with the USB cable plugged in, to go back to Download mode
you did keep the usb cable plugged in?

nyloncrack said:
just hold the 3 key salute buttons to go back, with the USB cable plugged in, to go back to Download mode
you did keep the usb cable plugged in?
Click to expand...
Click to collapse
No need to, you can reach download mode with or without the usb cable.
B.

BenjaminX2 said:
No need to, you can reach download mode with or without the usb cable.
B.
Click to expand...
Click to collapse
can u clarify me plz?

USB not detected by PC

Dear friends,
Recently I damaged by USB port. So, I sent my phone for repairing at Samsung Servicing Centre where they replaced my USB port. After they replaced my USB port, my phone is not detected by PC anymore. Nothing happens at all if I connect my phone to a PC. There is no notification at all. My phone is only charging. I tried pulling up and down the tongue - like structure inside my USB port but it's of no use at all. I am at a delimma. Please help.

thadoukuki said:
Dear friends,
Recently I damaged by USB port. So, I sent my phone for repairing at Samsung Servicing Centre where they replaced my USB port. After they replaced my USB port, my phone is not detected by PC anymore. Nothing happens at all if I connect my phone to a PC. There is no notification at all. My phone is only charging. I tried pulling up and down the tongue - like structure inside my USB port but it's of no use at all. I am at a delimma. Please help.
Click to expand...
Click to collapse
repairs are usually covered by warranty upon the same issue incase they were unable to fix it.
take it back to them and demand to resolve the issue,
you paid good money for the repair and therefore should be entitled to it

maybe u haven't installed samsung usb drivers

the same problem with mine., i just changed my usb chord after that i cannot connect to usb mass storage anymore even i installed usb driver still can't access storage

rio. said:
the same problem with mine., i just changed my usb chord after that i cannot connect to usb mass storage anymore even i installed usb driver still can't access storage
Click to expand...
Click to collapse
here's what i do when that happens:
(1) re-install drivers
(2) reboot pc and also cp
(3) connect chord and wait till the pc auto installs the drivers
(4) press "ok" connect phone storage
ps: also try to straighten the chord and flex it a bit. hehe

Reynaldi said:
maybe u haven't installed samsung usb drivers
Click to expand...
Click to collapse
I have installed Samsung Galaxy Y USB Drivers on my PC.
Sent from my GT-S5360 using xda premium

sheen_bebe said:
here's what i do when that happens:
(1) re-install drivers
(2) reboot pc and also cp
(3) connect chord and wait till the pc auto installs the drivers
(4) press "ok" connect phone storage
ps: also try to straighten the chord and flex it a bit. hehe
Click to expand...
Click to collapse
Sorry bro, it's not working.
Sent from my GT-S5360 using xda premium

deathnotice01 said:
repairs are usually covered by warranty upon the same issue incase they were unable to fix it.
take it back to them and demand to resolve the issue,
you paid good money for the repair and therefore should be entitled to it
Click to expand...
Click to collapse
I didn't trust them anymore bro. They know little about software. They flatly told me that my USB was blocked.
Sent from my GT-S5360 using xda premium

Deleted

Deleted

The main problem is that it is not even detected by my PC as connected. There is no notification of the phone being connected at all both in PC and phone. Can this be due to the USB cable that I am using? Or is the new USB port incompatible with my phone? Will reflashing the Rom solve the problem? The Samsung Servicing Centre fellows have no solution at all. They simply said that it is a software problem because I am on a custom Rom and that my USB is blocked. I don't think USB port can get blocked because of flashing a custom Rom because it was working fine before the repair. Please please please help me.
Sent from my GT-S5360 using xda premium

thadoukuki said:
The main problem is that it is not even detected by my PC as connected. There is no notification of the phone being connected at all both in PC and phone. Can this be due to the USB cable that I am using? Or is the new USB port incompatible with my phone? Will reflashing the Rom solve the problem? The Samsung Servicing Centre fellows have no solution at all. They simply said that it is a software problem because I am on a custom Rom and that my USB is blocked. I don't think USB port can get blocked because of flashing a custom Rom because it was working fine before the repair. Please please please help me.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
this also happens to me sometimes and ive already given you my own solution to this
if your phone is charging when you connect to the pc..
it means the chord is maybe working..
try to tighten the usb chord connector to the usb socket of your pc..
are you sure you are using the right drivers?? kindly check or use the kies cd
be patient and wait for the phone drivers to be automatically installed by the pc when you connect the phone fr the 1st time..
try turning off you anti-virus.. (not related but....)

thadoukuki said:
The main problem is that it is not even detected by my PC as connected. There is no notification of the phone being connected at all both in PC and phone. Can this be due to the USB cable that I am using?
Click to expand...
Click to collapse
There are charge only cables that do not data connect. If it is trickle charging the phone that is the problem. But you say there is no indication of a connection; sorry I just kinda jumped in at random. Your post popped up in the new posts list.
Sent from my SubGenius™ LG P925 with XBSA 3D ICS ROM and downloadable Slack™

Are ur usb ports properly functioning ? ie pendrive or other are working properly ?
also is your usb cable working ? if possible you can try with your friends usb cable which can go in your phones port .
if nothing works flash stock rom again
Sent from my GT-S5670 using xda premium

sheen_bebe said:
this also happens to me sometimes and ive already given you my own solution to this
if your phone is charging when you connect to the pc..
it means the chord is maybe working..
try to tighten the usb chord connector to the usb socket of your pc..
are you sure you are using the right drivers?? kindly check or use the kies cd
be patient and wait for the phone drivers to be automatically installed by the pc when you connect the phone fr the 1st time..
try turning off you anti-virus.. (not related but....)
Click to expand...
Click to collapse
I am using the latest Samsung USB drivers for mobile phones. My phone is only charging. No notification nor sound of connection to PC.
Sent from my GT-S5360 using xda premium

soham jambhekar said:
Are ur usb ports properly functioning ? ie pendrive or other are working properly ?
also is your usb cable working ? if possible you can try with your friends usb cable which can go in your phones port .
if nothing works flash stock rom again
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Pen drives are working properly. I don't think its the cable because it is the original USB cable provided with the phone. I have tried with other USB cables but same result. Will flashing stock Rom really solve the problem? I can't flash stock Rom because I can't connect to Odin boy longer.
Sent from my GT-S5360 using xda premium

drastic00 said:
There are charge only cables that do not data connect. If it is trickle charging the phone that is the problem. But you say there is no indication of a connection; sorry I just kinda jumped in at random. Your post popped up in the new posts list.
Sent from my SubGenius™ LG P925 with XBSA 3D ICS ROM and downloadable Slack™
Click to expand...
Click to collapse
I am using the USB cable supplied with the phone. It was working flawlessly before.
Sent from my GT-S5360 using xda premium

if its charging and pendrive is working then we can eliminate hardware issues
now for software its either pc or mobile
try connecting with another pc . it it doesn't work then its not pc problem
all I can say is flash stock rom then
Sent from my GT-S5670 using xda premium

soham jambhekar said:
if its charging and pendrive is working then we can eliminate hardware issues
now for software its either pc or mobile
try connecting with another pc . it it doesn't work then its not pc problem
all I can say is flash stock rom then
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
How will I flash stock Rom when USB is not working? Or is there a flashable zip of Stock Rom available?
Sent from my GT-S5360 using xda premium

[HELP] Can`t Odin My Device

Who Can Help Me ..
Why Can`t I Connect My Device To Odin ..
I Already Install USB Samsung Driver ..
But Yet My Device Don`t Appear Via Odin ..
I`m Using Odin v1.84 Only For GT-S5360 ..
And My Device SGY GT-S5360 ..
-[Sorry . I`m Not Good In English]-

enable usb debugging 1st then go to download mode then connect it to pc..

ImBJ said:
enable usb debugging 1st then go to download mode then connect it to pc..
Click to expand...
Click to collapse
I Know Sir ..
But My Device Was Brick . Stuck On Samsung Logo ..
How I Supposed Enable USB Debugging ..
Any Other Idea ??

Lemon_Lime`s said:
I Know Sir ..
But My Device Was Brick . Stuck On Samsung Logo ..
How I Supposed Enable USB Debugging ..
Any Other Idea ??
Click to expand...
Click to collapse
I use odin 3.07 although I dont think that makes any difference - if you can get into recovery mode you can just flash any custom rom
if only download mode is available try the following
remove the battery from phone
connect usb cable to pc
push vol down home power button on phone to start download mode
push vol up
wait till pc installs drivers or it shows adb android device in your pcs device manager
open odin
if that doesnt work you can enable usb debugging via adb commands
pull default.prop from the root of your phone (if you havent got one you can create one)
make it look like this
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=0
ro.debuggable=1
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
then push it back with adb
of course it requires adb and usb drivers installed so if you can do that you should be able to get into download mode and connect

Lemon_Lime`s said:
I Know Sir ..
But My Device Was Brick . Stuck On Samsung Logo ..
How I Supposed Enable USB Debugging ..
Any Other Idea ??
Click to expand...
Click to collapse
make sure the driver is the right 1 !! and u have to be on download mode before u connect ur phone to pc..

ImBJ said:
enable usb debugging 1st then go to download mode then connect it to pc..
Click to expand...
Click to collapse
How To Do It . I'm Newbie . Dun Know ??
I`m Using GT-S5360

Lemon_Lime`s said:
How To Do It . I'm Newbie . Dun Know ??
I`m Using GT-S5360
Click to expand...
Click to collapse
open phone settings
click applications
click development
tick enable usb debugging
with odin you just need to install the samsung usb drivers and put your phone in download mode

Remove all drivers first
Install Kies
Kill kies from task manager
and then try
This method should work

Usb
Simple and clear .......... make sure if ur Usb is working or not bcuz thats exactly what happened to me.... It does charge when its connected but it wont show up in d Odin ......... So try it with someother USB

marcussmith2626 said:
open phone settings
click applications
click development
tick enable usb debugging
with odin you just need to install the samsung usb drivers and put your phone in download mode
Click to expand...
Click to collapse
okeyy thanks . i try it
[iPhone 6] or [Samsung Galaxy S5]
>>Samsung Galaxy Y - Hyperion 8 Rom<<
>>Samsung Galaxy S3 mini - Official Stock Rom<<

Wait
After you install the required drivers(for example i was using v1.3 driver) you must plug it for the first time and wait for read it by your computer. if you see an error message in balloon notification, restart the device if you on the download mode. then, plug it again. your computer will now recognized your phone and it must be shown the full detection in the balloon notification.

[Q] odin cannot find my phone

I made a mistake while changing my rom.Instead of using recovery mode i use download mode so its all messed up.This samsung galaxy logo hanging but nothing happens.Its bricked totally.And when i connect my device GT S 5360 with usb and open odin it does not recognise nothing happens not even that yellow colour.I've done many times changing my rom rom from this to that but this is the first time i face this type of probs which i cant solve.Any type of suggestion will be most appreciated.
Thanks

Reinstall the USB drivers on your PC and then try.

aniket.lamba said:
Reinstall the USB drivers on your PC and then try.
Click to expand...
Click to collapse
i already did that but doesnt help:crying:

I am facing that problem too.
Both mass storage and download mode is not been recognized. But it works wither other phones.

use usb jig

oden cannot read ur galaxy y
Gexg said:
I made a mistake while changing my rom.Instead of using recovery mode i use download mode so its all messed up.This samsung galaxy logo hanging but nothing happens.Its bricked totally.And when i connect my device GT S 5360 with usb and open odin it does not recognise nothing happens not even that yellow colour.I've done many times changing my rom rom from this to that but this is the first time i face this type of probs which i cant solve.Any type of suggestion will be most appreciated.
Thanks
Click to expand...
Click to collapse
sir/maam have you tried installing again the usb driver.. then turn your phone to download mode.. try this in many trials.. godbless

Minions_Army said:
use usb jig
Click to expand...
Click to collapse
How to make it? And wont it hardbrick?

Jig is for unbrick,so it cant brick your device,look in general section for it or on facebook,ive and some others posted info about it.
GREETZ FROM TEAM-OPTIMA!!!

I finally solved my problem.Its easy yet very tactical.Its not about reinstalling the usb driver on ur pc or it doesnt have anything to do with ur odin version.Just get another GT S 5360 from ur friend and connect that mobile with ur pc.And now try yours u will see the magic.
HURRAY:silly::good:

Gexg said:
I finally solved my problem.Its easy yet very tactical.Its not about reinstalling the usb driver on ur pc or it doesnt have anything to do with ur odin version.Just get another GT S 5360 from ur friend and connect that mobile with ur pc.And now try yours u will see the magic.
HURRAY:silly::good:
Click to expand...
Click to collapse
or try to off your phone before connecting to pc then go to odin mode while connecting to pc.

Uninstall the USB drivers, and reinstall the newest version.

Trouble fixing up my Samsung SG-9006V hard bricked

Hello to everybody. I hope, you can understand me, because my english is terrible. I flashed the bootloader of my phone with a wrong image and I did a hard bricked, but my phone is not dead at all, so I have some hope to get it back. The first signal is that when I prees the power bottom a soft white bright appear on the left side of display, passed a second this light turn off and after turn up, and do this cyclically. The other sign is when I press the combination volume up+menu+power buttoms and appear a menu with three option, normal boot, recovery boot, fastboot, I must press volume down to ok, but when I press it dont work, dont work with any bottom I press. Well I saw in other post the sd card class 10 method to boot my phone but it didnt work. Today I dismantling it, I found 4 pins (RDX1, RDX2) (TXD1, TXD2). I assumed it was the serial port signal so, with a rs232 integrated circuit did something to connect to my pc with a usb-serial port cable, but it didnt work, odin and ADB not recognized my phone. Is there some software that work with DOS OS?. Somebody with more experience know something more?. I thinked to use a BOX software that they work with COM port but I dont know if it will work. Thank

Does Volume Down & Home & Power take you to download mode?
If yes, flash TWRP, and then the correct bootloader from TWRP recovery
Or just try flashing a full stock ROM with ODIN from download mode

*Detection* said:
Does Volume Down & Home & Power take you to download mode?
If yes, flash TWRP, and then the correct bootloader from TWRP recovery
Or just try flashing a full stock ROM with ODIN from download mode
Click to expand...
Click to collapse
My phone is dead, I cant enter to download mode, what mean for you the expression hard bricked? It is not the same to soft bricked

pindonga123 said:
My phone is dead, I cant enter to download mode, what mean for you the expression hard bricked? It is not the same to soft bricked
Click to expand...
Click to collapse
Hard bricked is hardware bricked.
Soft bricked is software bricked.
You say you have signs of life so it's not the hardware......
If the download mode button combination doesn't work, buy a USB jig off eBay.....They cost pocket change....
Plugging it into the usb socket in your phone will force the phone into download mode.....even if it's powered off.
Then you can flash the correct software.
http://i.imgur.com/rVnFwJM.jpg

keithross39 said:
Hard bricked is hardware bricked.
Soft bricked is software bricked.
You say you have signs of life so it's not the hardware......
If the download mode button combination doesn't work, buy a USB jig off eBay.....They cost pocket change....
Plugging it into the usb socket in your phone will force the phone into download mode.....even if it's powered off.
Then you can flash the correct software.
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
But all the USB jig I saw are for micro usb plug, my phone has a USB 3.0 Micro-B plug

pindonga123 said:
But all the USB jig I saw are for micro usb plug, my phone has a USB 3.0 Micro-B plug
Click to expand...
Click to collapse
The micro usb socket 'form' (shape/design) is standard right across the Galaxy range....I've used a Galaxy W, a Galaxy S2, a Galaxy S4, a Galaxy S5 and a Note 4......They all use the same usb socket.....
The difference between usb 2 and 3 is purely data transfer speed......
In all other respects, usb 3 is backwards compatible with usb 2.......
The jig WILL work......If anything does....
http://i.imgur.com/rVnFwJM.jpg

keithross39 said:
The micro usb socket 'form' (shape/design) is standard right across the Galaxy range....I've used a Galaxy W, a Galaxy S2, a Galaxy S4, a Galaxy S5 and a Note 4......They all use the same usb socket.....
The difference between usb 2 and 3 is purely data transfer speed......
In all other respects, usb 3 is backwards compatible with usb 2.......
The jig WILL work......If anything does....
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
It didnt work

pindonga123 said:
It didnt work
Click to expand...
Click to collapse
What do you mean it didn't work?
I know ebay deliver fairly quickly, but last time I checked, they weren't offering a same day delivery service....so unless you already had one, there is no way on earth you could have tried it....
http://i.imgur.com/rVnFwJM.jpg

pindonga123 said:
My phone is dead, I cant enter to download mode, what mean for you the expression hard bricked? It is not the same to soft bricked
Click to expand...
Click to collapse
What mean for you the expression of - if you're going to talk to people trying to help you like that, fix it yourself?

*Detection* said:
What mean for you the expression of - if you're going to talk to people trying to help you like that, fix it yourself?
Click to expand...
Click to collapse
Apologies, but I I thought you didnt read the post carefully, I thought you read very quickly. But I think my english is very bad, sorry for that it wasnt my intention to offend.
I didnt buy the jig I did it. It´s easy to do, I saw information in the net. It comes a resistance of 300Kohm between pin 4 and 5. I had in my home the plug and the resistances