I have oc my play but even at 1.9 my games like GTA still lag ,I'm using v6 debloated 2.3.4 Rom with doomkernel v14 ? any suggestions thanks in advance
Shaun27 said:
I have oc my play but even at 1.9 my games like GTA still lag ,I'm using v6 debloated 2.3.4 Rom with doomkernel v14 ? any suggestions thanks in advance
Click to expand...
Click to collapse
1.9Ghz? Hope you're kidding. Overclocking with too high Mhz can destroy your device (or it will drain battery).
Max. recommended clock: 1500Mhz (1,5Ghz)
Min. recommended clock: 1200Mhz (1,2Ghz)
I ran it at 1.9 for about 2 hours playing GTA with no problems but still a little laggy
Yes It can be possible my last stabile value is 1.7 - 1.8 but i run my play with 1.6
Gesendet von meinem R800i mit Tapatalk 2
For some people Ram manager helps, but it is a paid application. There might me other similar apps, though.
Lol. Then you can say goodbye to your play in 1-2 yrs. As i said, if you didnt want to **** up je device, use recommended clocks for gaming. Hope youll not be ignorant and read this post, lol.
Sent from my R800i using xda app-developers app
Shaun27 said:
I have oc my play but even at 1.9 my games like GTA still lag ,I'm using v6 debloated 2.3.4 Rom with doomkernel v14 ? any suggestions thanks in advance
Click to expand...
Click to collapse
mine is overclocked to 1.4 ghz, but i sometimes do 1.6 for gaming. i don't recommend 1.9ghz, but i'd laugh if your phone literally melts
wuby said:
1.9Ghz? Hope you're kidding. Overclocking with too high Mhz can destroy your device (or it will drain battery).
Max. recommended clock: 1500Mhz (1,5Ghz)
Min. recommended clock: 1200Mhz (1,2Ghz)
Click to expand...
Click to collapse
uh i have ran at 2ghz for 2 days on end while gaming and it was and still is fine . Not recommending it though
Sent from my R800i using Tapatalk 2
For gaming, then sure, but not for long time.
Sent from my R800i using xda app-developers app
Related
I started this thread because i want to be able to use Sparksco kernel v14 but it freezes when its set to 1.0GHZ I been running v10 as my daily kernel and its bottomline on my top list of kernels. Any help will be much appreciated, im on the latest nightly CM255, i had to revert back to v10 because i need speed to check emails and surf the internet...If theres another update for the V14 in the future i hope that can be a fix or its probably my setup that prevents me from reaching any higher speeds, overall Sparksco you the man!!! By the way ICS devs yall get mad props peace...
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
notsointeresting said:
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
Click to expand...
Click to collapse
I'm notsointeresting in hearing what u got to say but I get the point XDA supervisor...
peanjr said:
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I'm going to have to give that a shot homie...
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
sparksco said:
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
Oh okay i see Sparksco thanks for clarifying the setup, i dont mean to steer anybody in the wrong direction especially from working on a ICS BUILD which is the most highly anticipated OS for android. But im going to flash v14 and try out the setting and will get back and let you know thanx homie...
No luck but its amazing how you guys achieve the speeds... Tried the settings but my phone cant handle the pressure lol...Im gonna stick with this kernel tho... My bad for posting this thread in the wrong section its a rookie mistake...
peanjr said:
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
It worked i only needed to do a full wipe, thanx homie...
By the way Sparksco i got your setup on my rom, fully functional overclocked at the max with no feezes, thanx homie...
YOU'RE USING THE WRONG GOVERNOR MIN/MAX SETTINGS
For example:
IF I want to get 2ghz out of my phone I use the performance governor and use min/max of 2ghz.
OR:
I would use:
Gov: Smartass
Min CPU: 300mhz
Max CPU: 1.5ghz
You would freeze too if you were a CPU constantly going from 100mhz to 2000mhz all the time!
prguzman1978 said:
By the way Sparksco i got your setup on my my rom, fully functional overclocked at the max with no feezes, thanx homie...
Click to expand...
Click to collapse
Glad you got it working.
Sent from my PG06100 using xda premium
jefftet said:
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Smartass2 was made for the HTC Sensation which is a dual core gsm phone much like the Evo 3D (but cdma instead). I could never get it to clock passed 1.4ghz so I don't think it likes our phones much. It's a great concept but the normal old smartass still works much better for the shift.
Sent from my PG06100 using xda premium
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
danibri82 said:
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
Click to expand...
Click to collapse
Again, it depends on the governor and the min cpu. I ran scary stable at 1.9ghz for 24 hours+ straight, no lockups.
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
danibri82 said:
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
Click to expand...
Click to collapse
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
VICODAN said:
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
Click to expand...
Click to collapse
I think what he's saying is that he ran this kernel (pershoot v14) with a low min and a high max and it ran fine.
Sent from my PG06100 using xda premium
I am able to run GTAIII on my X8 smoothly with little lag (lags a bit when driving a car)
I was using:
GTA III settings (found it in XDA, forgot where.. Search for it)
Overclocked to 748mhz (highest for me with some reboots)
Was running on:
MiniCM7 2.18
nAa kernel 10
I don't know if it will run smoothly for others thought... Give it a try. And I also did not try it on 600mhz.
Was also running:
V6 Supercharger U9 RC5
Kick Ass Kernelizer (RC3?)
And on GTAIII settings set everything to lowest.
It's hard to type on phone...
Edit: I forgot... i was using 512mb swap (partition) i know its too much.. but hey!
And to nobodyAtall.. thanks for your awesome rom and kernel! Keep up the good work...
Sent from my E15i using xda premium
Great success, may try something also.
really cool.
amieow98 said:
I am able to run GTAIII on my X8 smoothly with little lag (lags a bit when driving a car)
I was using:
GTA III settings (found it in XDA, forgot where.. Search for it)
Overclocked to 748mhz (highest for me with some reboots)
Was running on:
MiniCM7 2.18
NaA kernel 10
I don't know if it will run smoothly for others thought... Give it a try. And I also did not try it on 600mhz.
Was also running:
V6 Supercharger U9 RC5
Kick Ass Kernelizer (RC3?)
And on GTAIII settings set everything to lowest.
It's hard to type on phone...
Sent from my E15i using xda premium
Click to expand...
Click to collapse
what gta version are you using?
I have already downloaded that launcher, but I'm useing v1.0 and it says that cannot find settup file, but gta working smoothly for me with 600mhz and without chainfire3d. maybe because of rom working so good
ty really cool
Sorry for no reply from me but... thanks for the replies! I appreciate it
Sent from my E15i using xda premium
Renegeits said:
what gta version are you using?
I have already downloaded that launcher, but I'm useing v1.0 and it says that cannot find settup file, but gta working smoothly for me with 600mhz and without chainfire3d. maybe because of rom working so good
Click to expand...
Click to collapse
Uh.. i heard there was a problem in the launcher that it doesn't detect the GTAIII
Install location... but i dont know how to fix it...
Sent from my E15i using xda premium
amieow98 said:
I am able to run GTAIII on my X8 smoothly with little lag (lags a bit when driving a car)
I was using:
GTA III settings (found it in XDA, forgot where.. Search for it)
Overclocked to 748mhz (highest for me with some reboots)
Was running on:
MiniCM7 2.18
nAa kernel 10
I don't know if it will run smoothly for others thought... Give it a try. And I also did not try it on 600mhz.
Was also running:
V6 Supercharger U9 RC5
Kick Ass Kernelizer (RC3?)
And on GTAIII settings set everything to lowest.
It's hard to type on phone...
Edit: I forgot... i was using 512mb swap (partition) i know its too much.. but hey!
And to nobodyAtall.. thanks for your awesome rom and kernel! Keep up the good work...
Sent from my E15i using xda premium
Click to expand...
Click to collapse
okey im gonna try to run GTA III on miniCM7.2 on Alfs v7 ICS(using it now ) swapping the same as u did .... and get back to u with the results thanx for the heads up!
Playing GTA3 Smooth
im playing GTA3 smooth with swap/undervolt and 19 ~ 480mhz
no lags promise
NaA minicm + NaA Kernel
xpraken said:
im playing GTA3 smooth with swap/undervolt and 19 ~ 480mhz
no lags promise
NaA minicm + NaA Kernel
Click to expand...
Click to collapse
Wow nice!
Sent from my E15i using xda premium
xpraken said:
im playing GTA3 smooth with swap/undervolt and 19 ~ 480mhz
no lags promise
NaA minicm + NaA Kernel
Click to expand...
Click to collapse
nice i trust you
xpraken said:
im playing GTA3 smooth with swap/undervolt and 19 ~ 480mhz
no lags promise
NaA minicm + NaA Kernel
Click to expand...
Click to collapse
You're using GTA III with sound or without sound ?
Sorry for my bad english
hmmm. I'm using swap 256, OC 768, RAM Manager "hard gaming", Chainfire3d powervr plugin, GTA Settings (everything low), playing version 1.0 without sounds and it's still laggy on MiniCM 2.1.9 and NaA11 kernel
Hellou.. i have a question..
I am searching for daily use rom..that has everything worling perfectly.. so with no bugs.
Which one you recomend?
Thanks a lot!!
sent from my HTC - jic.
I am also searching for some guide how to instal cuatom rom.. because i havent found one.
Phone is not rooted and still with android 2.1 eclair..
I have never done anything on samsung's phones.. so i need some help.
And thaaanks a lot!!
sent from my HTC - jic.
papaver said:
I am also searching for some guide how to instal cuatom rom.. because i havent found one.
Phone is not rooted and still with android 2.1 eclair..
I have never done anything on samsung's phones.. so i need some help.
And thaaanks a lot!!
sent from my HTC - jic.
Click to expand...
Click to collapse
Galaxy 3 has officially froyo upgrade but we have cm7/Gb and now cm10 developed by marcell;but it has some bug like camera and video recording but these are stable and daily usable rom.
Flashing guide:- http://forum.xda-developers.com/showthread.php?t=873645
Samsung Galaxy 3 (I5801/I5800) Flashing Guide
Rom and kernel list for galaxy 3:-
http://forum.xda-developers.com/showthread.php?t=1234591
Sent from my GT-I5800 using xda premium
Hello.. thank you very much!
sent from my HTC - jic.
I am using kyrillos v9.6 overclocked to 1ghz. It is fast and stable and everything works
Sent from my GT-I5800 using xda app-developers app
schnelle said:
I am using kyrillos v9.6 overclocked to 1ghz. It is fast and stable and everything works
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Thanks..
sent from my HTC - jic.
I'm also on Kyrillos v9.6 JPU OC for daily use. I can totally recommend it, everything works fine, no crashes or strange behaviour whatsoever.
sfand said:
I'm also on Kyrillos v9.6 JPU OC for daily use. I can totally recommend it, everything works fine, no crashes or strange behaviour whatsoever.
Click to expand...
Click to collapse
Thank you..
So i think this will be the one )))
sent from my HTC - jic.
papaver said:
Thank you..
So i think this will be the one )))
sent from my HTC - jic.
Click to expand...
Click to collapse
Don't forget to install setcpu after flashing the rom. My recommendations:
Min 200mhz max 600 for great battery life but slow phone
Min 200 or 300mhz max 800 for average performance
Min 300mhz max 1ghz for good performance and so-so battery life
My phone works stable even on 1.1 and 1.2 ghz but then I get big battery drain.
Another tip: default phone dialer is very slow/laggy. I use exDialer from playstore instead
Sent from my GT-I5800 using xda app-developers app
schnelle said:
Don't forget to install setcpu after flashing the rom. My recommendations:
Min 200mhz max 600 for great battery life but slow phone
Min 200 or 300mhz max 800 for average performance
Min 300mhz max 1ghz for good performance and so-so battery life
My phone works stable even on 1.1 and 1.2 ghz but then I get big battery drain.
Another tip: default phone dialer is very slow/laggy. I use exDialer from playstore instead
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Thanks for advice.
sent from my HTC - jic.
about overclock
iv tried overclock my phone to 1ghz but im kind coward to do it, whats the worst that could happend if you do it?
lfpaulinp said:
iv tried overclock my phone to 1ghz but im kind coward to do it, whats the worst that could happend if you do it?
Click to expand...
Click to collapse
Battery will drain faster, phone will be warmer. Some CPU's can't handle 1GHz so your phone may lag and you will have to change to a non-oc kernel.
Sent from my GT-I5800 using xda app-developers app
For me purumod3.0 is too good
It is non overclocked... simply fast ..no lags... battery charging lasts for >36 hrs depends on ur usage.... impresses with his work(jason)
Sent from my GT-I5800 using xda premium
Thanks for your feedback!, Ive found the best setup!
Higher my friend.
Sent from my R800i using xda app-developers app
JunDavis said:
Higher my friend.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Herro there
So what set cpu setup u rocking?
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
JunDavis said:
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Thanks man, ill try your set up out after my xplay has charged and will post results later of how smooth it is with mc4 and some other games like rr3
JunDavis said:
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I tried out your Set CPU setup and it was kind of bad, because of the lagfree governor,i did some research and i found a thread explaing all governors and lagfree doesn't actually make your phone "Lag free" it saves battery by throttling it down to the minimum clock speed for a simple task but when it needs more juice it will throttle higher providing more performance, but it doesn't work well as i have had regular force closes with apps like FlipBoard, Falcon Pro and messaging (which force closed alot)
Thanks anyways for contributing
Pizza_Dox said:
I tried out your Set CPU setup and it was kind of bad, because of the lagfree governor,i did some research and i found a thread explaing all governors and lagfree doesn't actually make your phone "Lag free" it saves battery by throttling it down to the minimum clock speed for a simple task but when it needs more juice it will throttle higher providing more performance, but it doesn't work well as i have had regular force closes with apps like FlipBoard, Falcon Pro and messaging (which force closed alot)
Thanks anyways for contributing
Click to expand...
Click to collapse
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
JunDavis said:
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
Click to expand...
Click to collapse
Sorry man for the mistake
I will try to read better next time,
I am currently using Doom Kernel so i don't have the darkside governor.
I will try the lupus Kernel maby tomorrow as i need my phone for social purposes right now,
OMG!!!
JunDavis said:
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
Click to expand...
Click to collapse
Awesome stuff man.
I decided to install Lupus Kernel (720p) and I failed so many times because ADB wasn't detecting my phone in fastboot and reason is because i use a mini usb hub (it connects into 1 hub and makes 5 hubs) so adb and fastboot dident have direct conntact with my phone and today i had a strange feeling and pluged it in to main usb port on my pc and it worked like a charm,i flashed lupus and i am enjoying it.
I think it is considerably faster that Doomkernel and smoother AND reliable,i used to get random force closes every now and then but now its super smooth and Touch screen response seems to be 100x better,
I also tried out your setup and shadowgun,Dead trigger(ULTRA GFX setting) and MC4 runs smooth at around 50 FPS
Glad I could help!
Sent from my R800i using xda app-developers app
Lupus ICS+GB Or Just Normal GB
Im Currently seeing what i can get the most speed out of what is better and does zram help with gaming
I don't think zRam helps with gaming that much,u might get 1-2 FPS boost
Sent from my R800i using xda app-developers app
Pizza_Dox said:
I don't think zRam helps with gaming that much,u might get 1-2 FPS boost
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Yes, it is true
Hello. I have question. What is the best rom for my defy? I have: CM 7.2 ; Android Gingerbread 2.3.7 and overclocked cpu from 800 mhz to 1100 mhz. Some games have lags, but in csr racing when i play hmm maybe 2 minutes maybe 3 i have no lags in race but in menu still have lags!? My friend told me best android is GB 2.3.4 stock, but i can't find this andoid, and i can't install :/ i'm beginner in android systems. Please help me with choose stable and smooth system for my defy . Oh i use Set CPU (not Set Vsel (****, more lags, cpu still change speed)) and sysctl config. I can wait for your ideas
DjEvill said:
Hello. I have question. What is the best rom for my defy? I have: CM 7.2 ; Android Gingerbread 2.3.7 and overclocked cpu from 800 mhz to 1100 mhz. Some games have lags, but in csr racing when i play hmm maybe 2 minutes maybe 3 i have no lags in race but in menu still have lags!? My friend told me best android is GB 2.3.4 stock, but i can't find this andoid, and i can't install :/ i'm beginner in android systems. Please help me with choose stable and smooth system for my defy . Oh i use Set CPU (not Set Vsel (****, more lags, cpu still change speed)) and sysctl config. I can wait for your ideas
Click to expand...
Click to collapse
I played games with this option:
latest CM7 Euroskank Gingerbread+1.15Ghz Overclock+LMK Set by Autokiller Memory optimizer(extreme)+removed useless system apps
have you tried taki_jeden rom?
it's very fluent and smooth, no scroll cache, i use inter-active governor and cpu runs on 1.1ghz
Sent from my MB526 using xda app-developers app
runeupo said:
have you tried taki_jeden rom?
it's very fluent and smooth, no scroll cache, i use inter-active governor and cpu runs on 1.1ghz
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
What is the taki_jeden rom? Oh i see it's JB . But it's only spain language?
taki_jeden rom is in Polish and in English
Sent from my MB526 using xda app-developers app
runeupo said:
have you tried taki_jeden rom?
it's very fluent and smooth, no scroll cache, i use inter-active governor and cpu runs on 1.1ghz
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Lol
Rom has a lot of bugs mate
Xperia d 4.1 is best for gaming
I played almost every hd game in it
Sent from my MB526 using xda premium
Rawwr said:
Lol
Rom has a lot of bugs mate
Xperia d 4.1 is best for gaming
I played almost every hd game in it
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
perhaps some of the common jb bugs, though in my daily use i don't experience bugs, only 2 or 3 fc's when updating in playstore, but that's playstore or my undervolting (57/1100)
other than that, to use your own words in development: "smooth and stable"
don't know about gaming though.
Sent from my MB526 using xda app-developers app