Rom help - Galaxy 3 General

Hellou.. i have a question..
I am searching for daily use rom..that has everything worling perfectly.. so with no bugs.
Which one you recomend?
Thanks a lot!!
sent from my HTC - jic.

I am also searching for some guide how to instal cuatom rom.. because i havent found one.
Phone is not rooted and still with android 2.1 eclair..
I have never done anything on samsung's phones.. so i need some help.
And thaaanks a lot!!
sent from my HTC - jic.

papaver said:
I am also searching for some guide how to instal cuatom rom.. because i havent found one.
Phone is not rooted and still with android 2.1 eclair..
I have never done anything on samsung's phones.. so i need some help.
And thaaanks a lot!!
sent from my HTC - jic.
Click to expand...
Click to collapse
Galaxy 3 has officially froyo upgrade but we have cm7/Gb and now cm10 developed by marcell;but it has some bug like camera and video recording but these are stable and daily usable rom.
Flashing guide:- http://forum.xda-developers.com/showthread.php?t=873645
Samsung Galaxy 3 (I5801/I5800) Flashing Guide
Rom and kernel list for galaxy 3:-
http://forum.xda-developers.com/showthread.php?t=1234591
Sent from my GT-I5800 using xda premium

Hello.. thank you very much!
sent from my HTC - jic.

I am using kyrillos v9.6 overclocked to 1ghz. It is fast and stable and everything works
Sent from my GT-I5800 using xda app-developers app

schnelle said:
I am using kyrillos v9.6 overclocked to 1ghz. It is fast and stable and everything works
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Thanks..
sent from my HTC - jic.

I'm also on Kyrillos v9.6 JPU OC for daily use. I can totally recommend it, everything works fine, no crashes or strange behaviour whatsoever.

sfand said:
I'm also on Kyrillos v9.6 JPU OC for daily use. I can totally recommend it, everything works fine, no crashes or strange behaviour whatsoever.
Click to expand...
Click to collapse
Thank you..
So i think this will be the one )))
sent from my HTC - jic.

papaver said:
Thank you..
So i think this will be the one )))
sent from my HTC - jic.
Click to expand...
Click to collapse
Don't forget to install setcpu after flashing the rom. My recommendations:
Min 200mhz max 600 for great battery life but slow phone
Min 200 or 300mhz max 800 for average performance
Min 300mhz max 1ghz for good performance and so-so battery life
My phone works stable even on 1.1 and 1.2 ghz but then I get big battery drain.
Another tip: default phone dialer is very slow/laggy. I use exDialer from playstore instead
Sent from my GT-I5800 using xda app-developers app

schnelle said:
Don't forget to install setcpu after flashing the rom. My recommendations:
Min 200mhz max 600 for great battery life but slow phone
Min 200 or 300mhz max 800 for average performance
Min 300mhz max 1ghz for good performance and so-so battery life
My phone works stable even on 1.1 and 1.2 ghz but then I get big battery drain.
Another tip: default phone dialer is very slow/laggy. I use exDialer from playstore instead
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Thanks for advice.
sent from my HTC - jic.

about overclock
iv tried overclock my phone to 1ghz but im kind coward to do it, whats the worst that could happend if you do it?

lfpaulinp said:
iv tried overclock my phone to 1ghz but im kind coward to do it, whats the worst that could happend if you do it?
Click to expand...
Click to collapse
Battery will drain faster, phone will be warmer. Some CPU's can't handle 1GHz so your phone may lag and you will have to change to a non-oc kernel.
Sent from my GT-I5800 using xda app-developers app

For me purumod3.0 is too good
It is non overclocked... simply fast ..no lags... battery charging lasts for >36 hrs depends on ur usage.... impresses with his work(jason)
Sent from my GT-I5800 using xda premium

Related

Need fast and battery optimized rom

Hey guys,
I've lost track on all the roms out there. So I hope you guys could help me finding a fast and battery optimized rom.
I'm currently using Darky's ROM, which is kind of nice,
but uses to much battery for me (only have 1.5 days).
I don't care about any special feature... just speed, market showing all apps and long battery life. Anything else is a nice to have...
thanks for your help
Hi,
Ive tried them all, but get best battery on darkyy 5.5, with voodoo advanced 1.1 oc 1200 kernel.
Dont know why but it is awesome!
Sent from my GT-I9000 using XDA App
how often do you need to refresh your battery?
And what is special about this kernel?
digitalcoder said:
Hi,
Ive tried them all, but get best battery on darkyy 5.5, with voodoo advanced 1.1 oc 1200 kernel.
Dont know why but it is awesome!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
lol! How can you get the best battery when you overclock!?
I'm now running JPY stock and I think you get the best battery life by using the stock kernel (no overclock, no other filesystem like ext4). It's plenty fast as well...
dagrim1 said:
lol! How can you get the best battery when you overclock!?
..
Click to expand...
Click to collapse
Theres a good post from curio on why this works, will try and dig it out. Essentially, less processor time is used for the same number of commands. (Oc doesnt mean your devices constantly runs at 1200 mhz tho)
Sent from my GT-I9000 using XDA App

OverClock...!!!

Now we have root on ARC, its high time we overclock it...
SetCpu doesn't work...
Can someone provide a comprehensive tutorial on overclocking and benchmarking ARC...???
First you need a custom kernel
and search..there's already a thread for this.
Sent from The Arc!
And also setcpu does work
Sent from my LT15i using XDA Premium App
festa20 is right setcpu is working on ARC.
yousif666 said:
festa20 is right setcpu is working on ARC.
Click to expand...
Click to collapse
Will try once again.. By the way whats the frequency you set your cpu on ???
Sent from my LT15i using XDA Premium App
adiktz said:
Will try once again.. By the way whats the frequency you set your cpu on ???
Sent from my LT15i using XDA Premium App
Click to expand...
Click to collapse
With "setCPU works" they just mean it works. you can't go above 1Ghz that's how it is for now.
Please, edit the tittle.
The speed of my heart have been increased
commodoor said:
With "setCPU works" they just mean it works. you can't go above 1Ghz that's how it is for now.
Click to expand...
Click to collapse
Exactly thats what I observed... That simply means it isn't workig as it should...!!!
Sent from my LT15i using XDA Premium App
That's because you don't know how setCPU works apparently
It works perfectly, setCPU allow you to modify the frequency of the processor within the range allowed by the kernel.
So once again, we need a custom kernel that modifies the voltage and frequencies allowed for setCPU to go higher than 1Ghz.
Just curious why do you wan't to overclock the phone, is it to slow?
What will happen if you overclock:
- higher battery drain
- Phone gets really hot
- it makes the cpu unstable
I never overclocked my phones and even the hero still runs fast.
piflechien said:
That's because you don't know how setCPU works apparently
It works perfectly, setCPU allow you to modify the frequency of the processor within the range allowed by the kernel.
So once again, we need a custom kernel that modifies the voltage and frequencies allowed for setCPU to go higher than 1Ghz.
Click to expand...
Click to collapse
The title says, "OverClocking"... I don't want to my cpu to work at lower freqs... I need overclocking...
Besides we r not here to discuss setCpu...
Waiting for custom Kernel...!!!
yup guys setcpu is working in our Arc in terms of 'battery saving' for now
overclocking is for later (or sooner i hope)
The MSM8255 can be overclocked to 1.8GHz on the Desire HD. I'll try to make an overclock kernel this week, but it's definately more work than I thought.
Sent from my Nexus S using XDA App
adiktz said:
Will try once again.. By the way whats the frequency you set your cpu on ???
Sent from my LT15i using XDA Premium App
Click to expand...
Click to collapse
If u know how to make a kernal go ahead so I can use more cpu but it works anyway the development isnt all too good at the minute but will be hopefully then we will have roms and hopefully kernals but u cant ***** about things if you cant try things your self just my opinion
Sent from my LT15i using XDA Premium App
Thijs96 said:
The MSM8255 can be overclocked to 1.8GHz on the Desire HD. I'll try to make an overclock kernel this week, but it's definately more work than I thought.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
And the dhd can run at 1998 ghz lol just correcting lol obviously its not the best of things to run at this but people do
Sent from my LT15i using XDA Premium App
commodoor said:
With "setCPU works" they just mean it works. you can't go above 1Ghz that's how it is for now.
Click to expand...
Click to collapse
Yes you are right the maximum is 1024 cant go any further i didn't know that he meant to go above 1024
before open such threads you should know about overclocking, of course setcpu wont enable overclock with stock kernel, why should it???
Speed is something which we always want more .. If we get Dual Core with 1.2Ghz still we need to over to push the limit. That's human nature ....
I have got overclocked Xperia Neo and when it was on 1.8 ghz it was 1. stable 2. cold 3. and really fast! but when you start to play somethink yes then it is really hot and it drain a battery too much I think oc is good.
Sorry for my bad English

V14 kernel

I started this thread because i want to be able to use Sparksco kernel v14 but it freezes when its set to 1.0GHZ I been running v10 as my daily kernel and its bottomline on my top list of kernels. Any help will be much appreciated, im on the latest nightly CM255, i had to revert back to v10 because i need speed to check emails and surf the internet...If theres another update for the V14 in the future i hope that can be a fix or its probably my setup that prevents me from reaching any higher speeds, overall Sparksco you the man!!! By the way ICS devs yall get mad props peace...
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
notsointeresting said:
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
Click to expand...
Click to collapse
I'm notsointeresting in hearing what u got to say but I get the point XDA supervisor...
peanjr said:
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I'm going to have to give that a shot homie...
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
sparksco said:
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
Oh okay i see Sparksco thanks for clarifying the setup, i dont mean to steer anybody in the wrong direction especially from working on a ICS BUILD which is the most highly anticipated OS for android. But im going to flash v14 and try out the setting and will get back and let you know thanx homie...
No luck but its amazing how you guys achieve the speeds... Tried the settings but my phone cant handle the pressure lol...Im gonna stick with this kernel tho... My bad for posting this thread in the wrong section its a rookie mistake...
peanjr said:
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
It worked i only needed to do a full wipe, thanx homie...
By the way Sparksco i got your setup on my rom, fully functional overclocked at the max with no feezes, thanx homie...
YOU'RE USING THE WRONG GOVERNOR MIN/MAX SETTINGS
For example:
IF I want to get 2ghz out of my phone I use the performance governor and use min/max of 2ghz.
OR:
I would use:
Gov: Smartass
Min CPU: 300mhz
Max CPU: 1.5ghz
You would freeze too if you were a CPU constantly going from 100mhz to 2000mhz all the time!
prguzman1978 said:
By the way Sparksco i got your setup on my my rom, fully functional overclocked at the max with no feezes, thanx homie...
Click to expand...
Click to collapse
Glad you got it working.
Sent from my PG06100 using xda premium
jefftet said:
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Smartass2 was made for the HTC Sensation which is a dual core gsm phone much like the Evo 3D (but cdma instead). I could never get it to clock passed 1.4ghz so I don't think it likes our phones much. It's a great concept but the normal old smartass still works much better for the shift.
Sent from my PG06100 using xda premium
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
danibri82 said:
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
Click to expand...
Click to collapse
Again, it depends on the governor and the min cpu. I ran scary stable at 1.9ghz for 24 hours+ straight, no lockups.
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
danibri82 said:
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
Click to expand...
Click to collapse
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
VICODAN said:
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
Click to expand...
Click to collapse
I think what he's saying is that he ran this kernel (pershoot v14) with a low min and a high max and it ran fine.
Sent from my PG06100 using xda premium

Overclock galaxy note

Hello,
Is it possible to overclock and underclock the galaxy note without custom kernel?
I have root but standart kernel.
Thanks for the help
regards
Sent from my GT-N7000 using xda premium
gofwar said:
Hello,
Is it possible to overclock the galaxy note without custom kernel?
I have root but standart kernel.
Thanks for the help
Best regard
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes you can use Tegrak Overclock (Ultimate) from the market, works on stock kernels
But be very carefull with your voltages, you are warned!
Do you maybe have good settings for the program?
is it possible to underclock to?
Can i leave the voltage standart and only set the cpu to 1.5 or 1.6
Thank you
Sent from my GT-N7000 using xda premium
gofwar said:
Do you maybe have good settings for the program?
is it possible to underclock to?
Thank you
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
You might want to look in the kernel threads (FM kernel, Abyss, etc) in development, there is enough info concerning your question, and yes you can underclock with tegrak.
With tegrak you can use any cpu speed you want, is not fixed to a few settings.
I don't recommend overclocking
cpt_shawky said:
I don't recommend overclocking
Click to expand...
Click to collapse
I think i wait with overclocking, its fast enough but sometimes its fun to tweak, but its to mutch risk i think, so after i downloaded the app and set it to 1.5, i did set it to default via the app and removed it
Sent from my GT-N7000 using xda premium
One useful thing to do is underclock and undervolt. This phone works perfectl in 1.0ghz with -50 voltage on all clocks and a maximum of 500mnz with screen off, and itll save u a lot of battery.
Sent from my PocketDock
gee2012 said:
Yes you can use Tegrak Overclock (Ultimate) from the market, works on stock kernels
But be very carefull with your voltages, you are warned!
Click to expand...
Click to collapse
I didn't know you could overclock on stock kernal, thanks for that.
I have installed Tegrak and am run at 1.5Ghz from now on. If I notice any issues at all I will report back.
cpt_shawky said:
I don't recommend overclocking
Click to expand...
Click to collapse
Why not?
Sent from my Galaxy Note using xda premium
AdzUK said:
I didn't know you could overclock on stock kernal, thanks for that.
I have installed Tegrak and am run at 1.5Ghz from now on. If I notice any issues at all I will report back.
Click to expand...
Click to collapse
What voltage are you using?
i want to overclock but when i read the message be carefull with the voltage it scared me a bit, dont want to destroy it so fast haha.
is it faster on 1.5 or almost not?
@viamonte: do you mean underclocking the slowest cpu speed when it is in deep sleep?
Sent from my GT-N7000 using xda premium
gofwar said:
What voltage are you using?
i want to overclock but when i read the message be carefull with the voltage it scared me a bit, dont want to destroy it so fast haha.
is it faster on 1.5 or almost not?
@viamonte: do you mean underclocking the slowest cpu speed when it is in deep sleep?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I've not touched the voltage. If my s2 could handle 1.5ghz I'm sure the Note will be just fine.
Why would you want to overclock the fastest phone ever available?
Yuretsz said:
Why would you want to overclock the fastest phone ever available?
Click to expand...
Click to collapse
Why not? Its never fast enough haha.
I have mine now on standart 1.4, when i think its to slow then i wil overclock it to 1.6 or flash a custom rom and overclock it to 1.7.
Does somebody now what the speed is from the gpu?
Sent from my GT-N7000 using xda premium
i've set my cpu to 1.6 and didn't touch the voltages, i left it at 1250mv and 1100mv for core and internal voltages respectively. been on this setting for 2 days now and i haven't had any problems so far. but i was wondering with that cpu frequency is it possible to undervolt?
Yuretsz said:
Why would you want to overclock the fastest phone ever available?
Click to expand...
Click to collapse
Because you can?
Why wouldn't you?
My PC is a 2.66Ghz which has been running at 4.0Ghz since day 1. Like I said, if more power is available at no risk, and absolutely no extra cost, then the question isn't why, the question is WHY NOT?
AdzUK said:
Because you can?
Why wouldn't you?
My PC is a 2.66Ghz which has been running at 4.0Ghz since day 1. Like I said, if more power is available at no risk, and absolutely no extra cost, then the question isn't why, the question is WHY NOT?
Click to expand...
Click to collapse
True! My PC is a Core i7 2600k 3.4GHz which has has been overclocked to 4.7GHz.
Why? Because you can as you said! It's simply to make an insanely fast product run even faster!!

Is merruk's 2.5 kernel stable ?

Is merruk's 2.5 latest kernel stable & having all the features of kuro's kernel.
And as I have read in JellyblastV3 thread is it true that we can over clock our gt s 5360 to 1.2 Ghz?
Sent from my GT-S5360 using xda premium
yes it's true, we can overclock our sgy to 1.24GHz
Check my signature sign.
rmhoh said:
yes it's true, we can overclock our sgy to 1.24GHz
Check my signature sign.
Click to expand...
Click to collapse
Does it increase the performance points when bench marked using antutu. & does it effect the battery life
Sent from my GT-S5360 using xda premium
Sent from my GT-S5360 using xda premium
sunamit37 said:
Does it increase the performance points when bench marked using antutu. & does it effect the battery life
Sent from my GT-S5360 using xda premium
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Pretty sure it definitely affects battery life.
Sent from my GT-S5360 using xda premium
Mitko said:
Pretty sure it definitely affects battery life.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
sunamit37 said:
Does it increase the performance points when bench marked using antutu. & does it effect the battery life
Sent from my GT-S5360 using xda premium
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
I don't know 'cause i don't benchmark my sgy, i just see the smoothness and performance with battery saver too.
---------- Post added at 12:42 AM ---------- Previous post was at 12:38 AM ----------
Mitko said:
Pretty sure it definitely affects battery life.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Yes!
It affects my battery let's say:
Daily use like texting, bluetooth, wifi, etc. = 2 to 4 days (depending on your cpu configuration)
Playing music, videos, games, browsing, etc = 1 to 2 days (also depends on cpu configuration)
I'll post some proof that it will last 2 to 4 and 1 to 2 days )
sunamit37 said:
Is merruk's 2.5 latest kernel stable & having all the features of kuro's kernel.
And as I have read in JellyblastV3 thread is it true that we can over clock our gt s 5360 to 1.2 Ghz?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
i sont think its stable because when i flashed it i got the problem of random reebot and many other issues such as wifi,calling,bootloop after rebooting itself....
Guys
But Merruk Kernel 2.5.
Is Unstable
It messes Everything..
Cool.yash17 said:
Guys
But Merruk Kernel 2.5.
Is Unstable
It messes Everything..
Click to expand...
Click to collapse
Merruk kernel doesnt messes anythng....
Plz follow the instructions of flashing it properly....
Sent from my GT-S5360 using xda app-developers app
hariskoirala said:
i sont think its stable because when i flashed it i got the problem of random reebot and many other issues such as wifi,calling,bootloop after rebooting itself....
Click to expand...
Click to collapse
Cool.yash17 said:
Guys
But Merruk Kernel 2.5.
Is Unstable
It messes Everything..
Click to expand...
Click to collapse
I cannot guarantee it's stableness, so it's really up to the user to test it out if it works. There are mixed reviews for Merruk Kernel at the moment, and i for one have encountered and fair share of problems, though i did manage to boot up with the kernel, it's now just a matter of seeing if i can be able to fix the things the don't work.
same thing here, i managed to boot with merruk 2.5 but later when i used the 1.2ghz i'm starting to experienced random restart. I try to used a lot of combination of governor and i/o but still i can't stabilize my sgy.. im using jellyblast v3.4 rom.
virel07 said:
same thing here, i managed to boot with merruk 2.5 but later when i used the 1.2ghz i'm starting to experienced random restart. I try to used a lot of combination of governor and i/o but still i can't stabilize my sgy.. im using jellyblast v3.4 rom.
Click to expand...
Click to collapse
same prob with me bro...so now i am with savie...
why i can't use wifi on merruk kernel ??
kayamokid said:
why i can't use wifi on merruk kernel ??
Click to expand...
Click to collapse
I haven't faced such issue though try using whitexp's wifi drivers search forum.
Sent from my GT-S5360 using Tapatalk 2
Merrill kernel has a common issue like the phone reboots frequently.. This can be avoided by setting cpu governer as smartassv2 and freq as 600 min and 1200 maximum. Whatever it is it is still in alpha stage. For wife u need to just flash the driver from whitespace...
Gud luck
Sent from my GT-S5360 using xda app-developers app
optimusinc said:
Merrill kernel has a common issue like the phone reboots frequently.. This can be avoided by setting cpu governer as smartassv2 and freq as 600 min and 1200 maximum. Whatever it is it is still in alpha stage. For wifi u need to just flash the driver from whitespace...
Gud luck
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Lol for wifi not wife
Dont take seriously ... FTFY
ROM EVOLUTION X3
KERNEL HELL FUSION
ALINS JB THEME + EVOLUTION S3 STATUS BAR.
technosavie said:
Lol for wifi not wife
Dont take seriously ... FTFY
ROM EVOLUTION X3
KERNEL HELL FUSION
ALINS JB THEME + EVOLUTION S3 STATUS BAR.
Click to expand...
Click to collapse
Was it really needed?
Sent from my Quad-core 1.5GHz 512MB RAM GT-S5360 using xda premium
Mitko said:
Was it really needed?
Sent from my Quad-core 1.5GHz 512MB RAM GT-S5360 using xda premium
Click to expand...
Click to collapse
sometyms strng thngs happen in xda
technosavie said:
Lol for wifi not wife
Dont take seriously ... FTFY
ROM EVOLUTION X3
KERNEL HELL FUSION
ALINS JB THEME + EVOLUTION S3 STATUS BAR.
Click to expand...
Click to collapse
Sent from my GT-S5360 using Tapatalk 2
optimusinc said:
Merrill kernel has a common issue like the phone reboots frequently.. This can be avoided by setting cpu governer as smartassv2 and freq as 600 min and 1200 maximum. Whatever it is it is still in alpha stage. For wife u need to just flash the driver from whitespace...
Gud luck
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
whitexp's driver will not work with merruk....
just turn wifi on/off when it shows error......
it will start again.....
I just keep my music player running at 0 volume....never let your phone sleep
hi buddy, if you use lionheart and sio then there is no need of keeping ur musicplayer on.
see this img.
SENT FROM NeMES|S PHO€NiX with MT 2-5 #206©®

Categories

Resources