I started this thread because i want to be able to use Sparksco kernel v14 but it freezes when its set to 1.0GHZ I been running v10 as my daily kernel and its bottomline on my top list of kernels. Any help will be much appreciated, im on the latest nightly CM255, i had to revert back to v10 because i need speed to check emails and surf the internet...If theres another update for the V14 in the future i hope that can be a fix or its probably my setup that prevents me from reaching any higher speeds, overall Sparksco you the man!!! By the way ICS devs yall get mad props peace...
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
notsointeresting said:
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
Click to expand...
Click to collapse
I'm notsointeresting in hearing what u got to say but I get the point XDA supervisor...
peanjr said:
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I'm going to have to give that a shot homie...
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
sparksco said:
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
Oh okay i see Sparksco thanks for clarifying the setup, i dont mean to steer anybody in the wrong direction especially from working on a ICS BUILD which is the most highly anticipated OS for android. But im going to flash v14 and try out the setting and will get back and let you know thanx homie...
No luck but its amazing how you guys achieve the speeds... Tried the settings but my phone cant handle the pressure lol...Im gonna stick with this kernel tho... My bad for posting this thread in the wrong section its a rookie mistake...
peanjr said:
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
It worked i only needed to do a full wipe, thanx homie...
By the way Sparksco i got your setup on my rom, fully functional overclocked at the max with no feezes, thanx homie...
YOU'RE USING THE WRONG GOVERNOR MIN/MAX SETTINGS
For example:
IF I want to get 2ghz out of my phone I use the performance governor and use min/max of 2ghz.
OR:
I would use:
Gov: Smartass
Min CPU: 300mhz
Max CPU: 1.5ghz
You would freeze too if you were a CPU constantly going from 100mhz to 2000mhz all the time!
prguzman1978 said:
By the way Sparksco i got your setup on my my rom, fully functional overclocked at the max with no feezes, thanx homie...
Click to expand...
Click to collapse
Glad you got it working.
Sent from my PG06100 using xda premium
jefftet said:
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Smartass2 was made for the HTC Sensation which is a dual core gsm phone much like the Evo 3D (but cdma instead). I could never get it to clock passed 1.4ghz so I don't think it likes our phones much. It's a great concept but the normal old smartass still works much better for the shift.
Sent from my PG06100 using xda premium
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
danibri82 said:
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
Click to expand...
Click to collapse
Again, it depends on the governor and the min cpu. I ran scary stable at 1.9ghz for 24 hours+ straight, no lockups.
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
danibri82 said:
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
Click to expand...
Click to collapse
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
VICODAN said:
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
Click to expand...
Click to collapse
I think what he's saying is that he ran this kernel (pershoot v14) with a low min and a high max and it ran fine.
Sent from my PG06100 using xda premium
Related
How can I reduce over heating while I overclock?
Sent from my HTC G2 using Tapatalk
Cpu profiles are about your best bet bro. And reducing needless overclocking.
Sent from my HTC Vision using XDA App
.... also the UV (undervolted) kernel in the dev forum SHOULD reduce overheating.
wileykat said:
.... also the UV (undervolted) kernel in the dev forum SHOULD reduce overheating.
Click to expand...
Click to collapse
Even then speeds over like 1.2ghz begin to get overvolted for stability. Also, none of the current GB roms have a dedicated UV kernel even though the stock one is very close to pershoots from what I've been reading (haven't looked at the voltage tables myself).
Sent from my HTC Vision using XDA App
Oh right,... I assumed it was UV'd straight through,... but that makes sense that it could fail at higher clock speeds when UV'd. Let us know your findings if you take a butchers at the 2.3 kernel.
How hot is too hot in your opinion?
Sent from my HTC Vision using Tapatalk
urfavoritemazn said:
How hot is too hot in your opinion?
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
I have a profile with warning tone and underclock to 768 if it hits 40 degree. Thats Celsius though.
stevencpoynter said:
Even then speeds over like 1.2ghz begin to get overvolted for stability. Also, none of the current GB roms have a dedicated UV kernel even though the stock one is very close to pershoots from what I've been reading (haven't looked at the voltage tables myself).
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Thought you might want to read this,.... might be diff from when you last checked,.....
pershoot said:
Kernel 2.6.32.27 – OC-UV-NEON_FP (1.516GHZ) – G2
-based off of HTC's vision-MR-2.6.32-g9ab3677 (developer.htc.com) and supplied vision_defconfig (2.6.32.17)
-merged up to kernel.org's 2.6.32.27
-merged in coolbh3k's oc patch
-frequency range is from 806 to 1516; default bootup is 245-806.
-undervolt all frequencies (max mv is 1300)
-merged in zinx's GAN_ETH wifi calling module modifications
-merged in a few changes from cyanogen's github.
-optimisations based off of .35 release from Nexus/DS.
-added/amended a few things to the config (-xtra (please see below and in github)).
Note:
This is a Work in Progress. Undervolt/Frequencies will be adjusted over the next coming weeks, as well as merging in further optimisations/tweaks from the DS/Nexus .35 release.
http://droidbasement.com/db-blog/
Click to expand...
Click to collapse
Now we have root on ARC, its high time we overclock it...
SetCpu doesn't work...
Can someone provide a comprehensive tutorial on overclocking and benchmarking ARC...???
First you need a custom kernel
and search..there's already a thread for this.
Sent from The Arc!
And also setcpu does work
Sent from my LT15i using XDA Premium App
festa20 is right setcpu is working on ARC.
yousif666 said:
festa20 is right setcpu is working on ARC.
Click to expand...
Click to collapse
Will try once again.. By the way whats the frequency you set your cpu on ???
Sent from my LT15i using XDA Premium App
adiktz said:
Will try once again.. By the way whats the frequency you set your cpu on ???
Sent from my LT15i using XDA Premium App
Click to expand...
Click to collapse
With "setCPU works" they just mean it works. you can't go above 1Ghz that's how it is for now.
Please, edit the tittle.
The speed of my heart have been increased
commodoor said:
With "setCPU works" they just mean it works. you can't go above 1Ghz that's how it is for now.
Click to expand...
Click to collapse
Exactly thats what I observed... That simply means it isn't workig as it should...!!!
Sent from my LT15i using XDA Premium App
That's because you don't know how setCPU works apparently
It works perfectly, setCPU allow you to modify the frequency of the processor within the range allowed by the kernel.
So once again, we need a custom kernel that modifies the voltage and frequencies allowed for setCPU to go higher than 1Ghz.
Just curious why do you wan't to overclock the phone, is it to slow?
What will happen if you overclock:
- higher battery drain
- Phone gets really hot
- it makes the cpu unstable
I never overclocked my phones and even the hero still runs fast.
piflechien said:
That's because you don't know how setCPU works apparently
It works perfectly, setCPU allow you to modify the frequency of the processor within the range allowed by the kernel.
So once again, we need a custom kernel that modifies the voltage and frequencies allowed for setCPU to go higher than 1Ghz.
Click to expand...
Click to collapse
The title says, "OverClocking"... I don't want to my cpu to work at lower freqs... I need overclocking...
Besides we r not here to discuss setCpu...
Waiting for custom Kernel...!!!
yup guys setcpu is working in our Arc in terms of 'battery saving' for now
overclocking is for later (or sooner i hope)
The MSM8255 can be overclocked to 1.8GHz on the Desire HD. I'll try to make an overclock kernel this week, but it's definately more work than I thought.
Sent from my Nexus S using XDA App
adiktz said:
Will try once again.. By the way whats the frequency you set your cpu on ???
Sent from my LT15i using XDA Premium App
Click to expand...
Click to collapse
If u know how to make a kernal go ahead so I can use more cpu but it works anyway the development isnt all too good at the minute but will be hopefully then we will have roms and hopefully kernals but u cant ***** about things if you cant try things your self just my opinion
Sent from my LT15i using XDA Premium App
Thijs96 said:
The MSM8255 can be overclocked to 1.8GHz on the Desire HD. I'll try to make an overclock kernel this week, but it's definately more work than I thought.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
And the dhd can run at 1998 ghz lol just correcting lol obviously its not the best of things to run at this but people do
Sent from my LT15i using XDA Premium App
commodoor said:
With "setCPU works" they just mean it works. you can't go above 1Ghz that's how it is for now.
Click to expand...
Click to collapse
Yes you are right the maximum is 1024 cant go any further i didn't know that he meant to go above 1024
before open such threads you should know about overclocking, of course setcpu wont enable overclock with stock kernel, why should it???
Speed is something which we always want more .. If we get Dual Core with 1.2Ghz still we need to over to push the limit. That's human nature ....
I have got overclocked Xperia Neo and when it was on 1.8 ghz it was 1. stable 2. cold 3. and really fast! but when you start to play somethink yes then it is really hot and it drain a battery too much I think oc is good.
Sorry for my bad English
Is there one or as simple trial and error kind of thing?
Thanks
Sent from my NookColor using Tapatalk
SillyRice said:
Is there one or as simple trial and error kind of thing?
Thanks
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Just trial and error. I would start at 1.2ghz on stepping 5 and increase by 50mhz being sure to thoroughly test each clock rate.
Do NOT use the set on boot option until you are sure it is stable.
dalingrin said:
Just trial and error. I would start at 1.2ghz on stepping 5 and increase by 50mhz being sure to thoroughly test each clock rate.
Do NOT use the set on boot option until you are sure it is stable.
Click to expand...
Click to collapse
I ended up testing/benchmarking in 25mhz increments. I know it was a bit more time consuming, but I found that my NC could handle 1275 while using multimedia intensive apps, but a friend could get his up to 1325 running benchmarks and not rebooting.
I think we got in one or two runs at 1350, but it definitely wasn't stable. Broke 4200 in quadrant, for whatever that's worth.
I have it set at 1300 and performance and get 2582 how do you get 4200?
Sent from my NookColor using XDA Premium App
meber said:
I have it set at 1300 and performance and get 2582 how do you get 4200?
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
This was a fresh install with no other background tasks running. All we did was get the CM7 ROM loaded, OC Kernel and gapps.
I'll get some screenshots of his quad scores when he gets back from helping a buddy move. I think we took screenshots of everything 1250+. I might try getting a full reload working and see if I can break that barrier.
I'm running 1325 and the best score I can get is high 3100s.
Can you guys tell me what settings you have under performance menu?
Sent from my NookColor using XDA Premium App
I got similar scores to them and I used the default settings In performance... I think its a matrer of what you have installed and your device. Also don't worry about quadrant scores they are not that important. If your nook runs smooth what does it matter?
Sent from my NookColor using Tapatalk
Each machine will have to be trial and error. Different device..even same hardware are really all different to one degree or another....example...I have 2 nooks..both running the same version of cm..and kernel...my second one never gets past 3200 on quadrant...go figure...same exact software running on both.
I did this test with benchmarks back to back on higher cpu frequencies, and i ended up with 1325 being the highest stable i could go. Very low 3000's for benchmarks in quadrent which dont mean anything of course, but there ya go. Runs like a champ.
Sorry for the ignorant reply...but what will overclocking actually do? I have a NC with a dual boot CM7 SDcard. Didn't do it, bought it from Jonathan on Ebay, works great!
So I just opened up is monitor and happened to go to the processor tab and discovered that the second core was underclocked to 456MHz with the governor set to conservative. Now my xoom is flying. Its great.
Step by step:
Open os monitor (im on tiamat 2.2.2)
Go to misc tab
Tap on more next to CPU
Change it to the settings you want
???
Profit
Let me know if you have any success with this.
Sent from my Xoom using xda premium
Just ran Antutu to do some benches and noticed on my cpu usage bar that only one core was used in the benchmarking process, except for reading/writing to the sdcard which did use both cores.
Sent from my Xoom using xda premium
Good lookin. Ill have to check mine out now
Sent from my PG86100 using Tapatalk
Over night my core got underclocked again. So im thinking its the OS doing this to save battery when it doesn't absolutely need that core.
Sent from my Xoom using xda premium
Worked like a Charm
d3athsd00r said:
So I just opened up is monitor and happened to go to the processor tab and discovered that the second core was underclocked to 456MHz with the governor set to conservative. Now my xoom is flying. Its great.
Step by step:
Open os monitor (im on tiamat 2.2.2)
Go to misc tab
Tap on more next to CPU
Change it to the settings you want
???
Profit
Let me know if you have any success with this.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
Thanks on this one, I had no issues and checked quadrant and got a personal high of 3796 I really don't understand why the Xoom gets such a bad rep, I love mine and to this day still able to find new things to learn about it.
-NooRotic
Both cores running at full clock on stock.
mcnob said:
Both cores running at full clock on stock.
Click to expand...
Click to collapse
I was running Rogue's 1.4.1 kernel and it was underclocking the second core. Now I'm back on Tiamat kernel and it isn't underclocked.
Seems to be kernel specific.
d3athsd00r said:
I was running Rogue's 1.4.1 kernel and it was underclocking the second core. Now I'm back on Tiamat kernel and it isn't underclocked.
Seems to be kernel specific.
Click to expand...
Click to collapse
ooh i wouldn't say so... i'm using rogue 1.4.1 and both cores are the same freq.
Lizzo said:
ooh i wouldn't say so... i'm using rogue 1.4.1 and both cores are the same freq.
Click to expand...
Click to collapse
Bah. Idk then. I saw some people complaining about it elsewhere but didn't take the time to find anything out.
Sent from my Xoom using xda premium
Hey guys with all the quadrant scores being posted everywhere, I haven't seen a topic dedicated to these alone. So that's what this thread is for. Here are the rules:
Rule 1: when you post a quadrant please tell everyone what Rom/Kernel you are running so if anyone wishes to follow your steps they may do so.
Rule 2: Please merge your posts if your going to post one after another or simply edit your post and update it to maintain order.
That's it. Thanks guys and here is my quadrant. AOKP 40.1 devil .97 with v6 super charger and kak
Sent from my SCH-I500 using xda premium
It's a freakin' rocket-sled from hell it is!!
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Azuma73 said:
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Click to expand...
Click to collapse
Hey azuma how did you get your CPU so high? Also I need you to test something for me. Antutu tels me I'm pulling over 3200 in a quad. But quad pro tells me just over 2600. I'm unsure which to believe
Sent from my SCH-I500 using xda premium
I believe antutu runs more tests than quadrant, therefore showing a higher score, but I could be mistaken?
My phone IS fast and stable, but now I think I need to work on better battery!?
Sent from my SCH-I500 using xda premium
Dim your screen. Go to (I think development) and put a chexk in kill background processes and leave no programs running. I also use toolbox pro to freeze apps that continuously run and use the mobile web version of them.
Sent from my SCH-I500 using xda premium
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: smartassV2
min-max frequency: 200-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
Yeak I got a couple for ya.
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
vrahn said:
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
Click to expand...
Click to collapse
Ok I believe the Force GPU rendering definitely made the biggest difference. My 2d and 3d scores jumped up. I updated my post. For some reason in the ROM controls it took a couple tries for the new cpu and governor settings to stick after reboot.
5042 on my stock rooted gs3
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
ATRIXXIRTA said:
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
Cm7 turns this phone into one of the beastlyiest devices going. Not sure if beastlyiest is a real word, but its a good way to describe the awesomeisity of Cm7.... haha I'm a grammar god!!
Sent from my MB860 using xda app-developers app
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
MunkyDrunky that still seems a little low considering what everyone else is pulling. Try this as well. And I'll include the files from my phone when I get to my computer with instructions.
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Click to expand...
Click to collapse
Ok Ive used Rom toolbox when I was using the Gummy rom. Would I still use devil kernel config or manager for the cpu and ram free value changes? How do I make sure the changes will always stick, ive had trouble with that after reboot.
vrahn said:
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
I should say my running apps are usually not many. Right now its Rom Control, Android keyboard, Maps, Nova Launcher, and Rom Toolbox, and Superuser. I test my gps a lot with Maps. Otherwise I dont have a lot running since this isnt my daily use phone. I want it to be again but want to get it flying first.
Thank you for the good advice and help. Trying SD boost now...will try v6 and 3g speed boost later
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
rjkxb2 said:
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
Click to expand...
Click to collapse
i also get very low scores on my fascinate.
What settings are you using with v6
Sent from my SCH-I500 using xda premium
vrahn said:
What settings are you using with v6
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
fix emissions, 3g enhancements, wheel alignment, minfrees: 8,14,55,70,85,100 MB. It says I'm 100% supercharged. I feel like there has been an improvement I'm just thinking I may have missed some setting that would help even more.
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
sageDieu said:
View attachment 1195920
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
I hit 5694 with mine today