Related
What governer do u use on cm7?
Sent from my Liberty using XDA App
I use smartass
Sent from my Liberty using XDA App
lilhaiti said:
I use smartass
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Is the battery life better than the stock way?
Sent from my Liberty using XDA App
Ive used on demand for the most part. I've been trying out Interactive the past couple days and it seems just a hair snappier. I haven't noticed a negative impact on battery either.
Sent from my cm7 Aria.
Javi97100 said:
Is the battery life better than the stock way?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Smartass
You don't need profile for screen off 120-320 screen off 400-806(or whatever Max you have set) screen on scaling like interactive
Been good on battery life for me
Sent from my Liberty using XDA App
drowningchild said:
Smartass
You don't need profile for screen off 120-320 screen off 400-806(or whatever Max you have set) screen on scaling like interactive
Been good on battery life for me
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
what do all the interactive, userspace, and conservative do? i get the other ones.
I'm going to try smartass. I've turned off screen off profile on setpcu. Since yesterday I was using interactive 120/78?. Not bad, the battery life been pretty good to me.
Sent from my Liberty using XDA Premium App
foreverzero89 said:
what do all the interactive, userspace, and conservative do? i get the other ones.
Click to expand...
Click to collapse
Governors Explanation
Which ROMs are you using that have support for this new fangled smartass governor?
I'm currently running 7.0.0 with the stock kernel and I have access to all but smartass.
It's kernels, not ROMs, my friend.
Sent from my PC36100 using XDA App
Flash smartass over any cm7
Sent from my Liberty
Funkmon said:
It's kernels, not ROMs, my friend.
Click to expand...
Click to collapse
Right, I am aware of the difference. I was curious as to which ROMs people were using that included the kernel, I didn't realise everyone had specifically flashed a smartass kernel.
Thanks for the clarification.
There aren't any roms that include this kernel. You flash separately.
cm7 rc4 ladios, 6-7 kernel
Jimmeh83 said:
Right, I am aware of the difference. I was curious as to which ROMs people were using that included the kernel, I didn't realise everyone had specifically flashed a smartass kernel.
Thanks for the clarification.
Click to expand...
Click to collapse
I'm personally using drowningchilds 6-7 kernel, which has the smartass governor. The thread can be found in the aria development section
Sent from my cm7 Aria.
Drowningchild has a kernel for CM7 and one for Liberated. I use CM7 with the 6-7 kernel on smartass governor overclocked at 320-787.
On a side note, I did take the advice from drowningchild's kernel thread and it has proven to work: if you flash the kernel, do not flash the GPS old libs, as it will make your CPU usage skyrocket and you'll get horrible battery life.
Sent from my Liberty using XDA App
lsusparky621 said:
Drowningchild has a kernel for CM7 and one for Liberated. I use CM7 with the 6-7 kernel on smartass governor overclocked at 320-787.
On a side note, I did take the advice from drowningchild's kernel thread and it has proven to work: if you flash the kernel, do not flash the GPS old libs, as it will make your CPU usage skyrocket and you'll get horrible battery life.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
its the gps libs period that cause errors
and i have no liberated kernel built
My apologies
Sent from my Liberty using XDA App
I'm not responsible to any damage which is caused by applying this kernel (boot.img) to your phone ！
I've built a new kernel with BFS scheduler which is created by Con Kolivas (http://ck-hack.blogspot.com/) by patching genokolar's overclock kernel source (http://forum.xda-developers.com/showthread.php?t=1059029).
I've tested this new kernel on my phone, I'm running the custom rom 160 which is created by stockwell (http://forum.xda-developers.com/showthread.php?t=1059753), so far I'm quite impressed by the quick responsiveness of the phone even I set the cpu clock back to 800MHz in conservative mode.
Unfortunately the WiFi is not working, I hope later I can do factory reset to see if that will fix it, anyone willing to give it a trial and let me know the result is very appreciated !
Please note you may need to wipe the dalvik cache after install and reboot several times.
Updated : 2011-Jun-16
Looks like firefox adblock plus block my upload file.
I've tested this kernel several days, it works quite stable for me as long as you can boot it up, there may be a pop up says that system is not response during boot up, just ignore it.
There two things I found so far...
1. wifi is not working
2. battery drains out faster and warmer, I guess that's relate to overclock, if I set the clock back 800MHz, it seems ok.
wmi543 said:
I'm not responsible to any damage which is caused by applying this kernel (boot.img) to your phone ！
I've built a new kernel with BFS scheduler which is created by Con Kolivas (http://ck-hack.blogspot.com/) by patching genokolar's overclock kernel source (http://forum.xda-developers.com/showthread.php?t=1059029).
I've tested this new kernel on my phone, I'm running the custom rom 160 which is created by stockwell (http://forum.xda-developers.com/showthread.php?t=1059753), so far I'm quite impressed by the quick responsiveness of the phone even I set the cpu clock back to 800MHz in conservative mode.
Unfortunately the WiFi is not working, I hope later I can do factory reset to see if that will fix it, anyone willing to give it a trial and let me know the result is very appreciated !
Please note you may need to wipe the dalvik cache after install and reboot several times.
Click to expand...
Click to collapse
What's the profit with a Brain **** Scheduler?
Cm7 uses the Bfs too.
Wikipedia says that that is speeding up the responsibility from your phone.
Sent from my Desire HD using XDA Premium App
But will it serve good purpose ?
What happens if they add a bogus algorithm instead of the brain **** one?
as soon as wifi is working i can try it and report bugs (if there are any)...
levibuko said:
Cm7 uses the Bfs too.
Wikipedia says that that is speeding up the responsibility from your phone.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
CM7 does not use BFS. We decided it was too buggy. It causes all sorts of instability on the Blade and other devices. Probably has a similar effect on the U8800 after a while
levibuko said:
Cm7 uses the Bfs too.
Wikipedia says that that is speeding up the responsibility from your phone.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Using wiki as reference isn't the best.
However seeing that it does some bogus at points where the active thread of a normal priority process wants another time slice, and in ready block there is a lower priority process who wants a brief time slice it gives the time slice to the active thus allowing stupid **** ups. I guess its not good at all ?
Some good patches to add might be BFQ and the smartass CPU scheduler. Both seem to be stable and have good performance on my Blade and my Wildfire
HCDR.Jacob said:
Some good patches to add might be BFQ and the smartass CPU scheduler. Both seem to be stable and have good performance on my Blade and my Wildfire
Click to expand...
Click to collapse
Genokolars kernal has smartass, im not sure about BFQ but im pretty sure it does..
ryronz said:
Genokolars kernal has smartass, im not sure about BFQ but im pretty sure it does..
Click to expand...
Click to collapse
Okay sorry, I'm unfamiliar with what the kernels have at the minute
Sent from my Blade using XDA App
HCDR.Jacob said:
CM7 does not use BFS. We decided it was too buggy. It causes all sorts of instability on the Blade and other devices. Probably has a similar effect on the U8800 after a while
Click to expand...
Click to collapse
Im sry...
Sent from my Desire HD using XDA Premium App
levibuko said:
Im sry...
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Lol why sorry? Just clarifying that while CM may have used it in the past, no official CyanogenMod ROMs include it
BFS404 is pretty stable and I've been running it on my kernels for about a month and I have no complains, everything runs smooth, fast and battery friendly.
I started this thread because i want to be able to use Sparksco kernel v14 but it freezes when its set to 1.0GHZ I been running v10 as my daily kernel and its bottomline on my top list of kernels. Any help will be much appreciated, im on the latest nightly CM255, i had to revert back to v10 because i need speed to check emails and surf the internet...If theres another update for the V14 in the future i hope that can be a fix or its probably my setup that prevents me from reaching any higher speeds, overall Sparksco you the man!!! By the way ICS devs yall get mad props peace...
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
notsointeresting said:
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
Click to expand...
Click to collapse
I'm notsointeresting in hearing what u got to say but I get the point XDA supervisor...
peanjr said:
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I'm going to have to give that a shot homie...
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
sparksco said:
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
Oh okay i see Sparksco thanks for clarifying the setup, i dont mean to steer anybody in the wrong direction especially from working on a ICS BUILD which is the most highly anticipated OS for android. But im going to flash v14 and try out the setting and will get back and let you know thanx homie...
No luck but its amazing how you guys achieve the speeds... Tried the settings but my phone cant handle the pressure lol...Im gonna stick with this kernel tho... My bad for posting this thread in the wrong section its a rookie mistake...
peanjr said:
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
It worked i only needed to do a full wipe, thanx homie...
By the way Sparksco i got your setup on my rom, fully functional overclocked at the max with no feezes, thanx homie...
YOU'RE USING THE WRONG GOVERNOR MIN/MAX SETTINGS
For example:
IF I want to get 2ghz out of my phone I use the performance governor and use min/max of 2ghz.
OR:
I would use:
Gov: Smartass
Min CPU: 300mhz
Max CPU: 1.5ghz
You would freeze too if you were a CPU constantly going from 100mhz to 2000mhz all the time!
prguzman1978 said:
By the way Sparksco i got your setup on my my rom, fully functional overclocked at the max with no feezes, thanx homie...
Click to expand...
Click to collapse
Glad you got it working.
Sent from my PG06100 using xda premium
jefftet said:
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Smartass2 was made for the HTC Sensation which is a dual core gsm phone much like the Evo 3D (but cdma instead). I could never get it to clock passed 1.4ghz so I don't think it likes our phones much. It's a great concept but the normal old smartass still works much better for the shift.
Sent from my PG06100 using xda premium
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
danibri82 said:
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
Click to expand...
Click to collapse
Again, it depends on the governor and the min cpu. I ran scary stable at 1.9ghz for 24 hours+ straight, no lockups.
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
danibri82 said:
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
Click to expand...
Click to collapse
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
VICODAN said:
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
Click to expand...
Click to collapse
I think what he's saying is that he ran this kernel (pershoot v14) with a low min and a high max and it ran fine.
Sent from my PG06100 using xda premium
Is there such thing as a safe overclock speed? Will my phone blow up for running it at 1.2 on a daily basis? (I searched for this topic but couldn't find anything specific to the glacier)
Sent from my HTC Glacier using XDA
The cpu in this phone overclocks well. 1.2 definitely won't hurt it. I've known people who ran everyday at 1.5.
I have an excellent cable internet service, with wireless. As such, I don't notice a real difference when I'm on WiFi. I wouldn't want to overclock anymore than 1.2 to 1.4
Sent from my HTC Glacier using XDA Premium
jjbadd385 said:
I have an excellent cable internet service, with wireless. As such, I don't notice a real difference when I'm on WiFi. I wouldn't want to overclock anymore than 1.2 to 1.4
Sent from my HTC Glacier using XDA Premium
Click to expand...
Click to collapse
Hmmm, what does web service gotta do with overclocking the devices cpu?
coupetastic-droid said:
Hmmm, what does web service gotta do with overclocking the devices cpu?
Click to expand...
Click to collapse
I was wondering the same thing
Sent from my HTC Glacier using xda premium
I'm just referring to the overall speed and performance of the handset. I haven't noticed any better performance with my phone being overclocked...isn't that the purpose of overclocking, to increase speed & performance? If not I am misunderstanding the purpose of overclocking?
I was just saying that with browsing and overall usage on my WiFi connection its hard to notice any changes whether I'm running at 1 GHz or 1.5 GHz ....
Sent from my HTC Glacier using XDA Premium
Overclocking doesn't speed up internet service though. It just speeds up scrolling through pages, windows, opening applications and overall performance within the applications and device.
I would get SetCPU, then you probably are fine up to 1.4 ghz. I really can't recommend pushing it higher because there isn't a noticable performance increase. I use SetCPU and i am clocked at around 122Mhz-1.3Ghz with a screen off profile of 122-768Mhz and a temperature profile of 32C> 122Mhz-1.0Ghz.
I know, a lot to take in but i get really good battery life with that stuff. If you get SetCPU, experiment.
Also, here are the take away messages.
1. USE SETCPU, ITS AWESOME
2.DON'T PUSH IT TO 2GHZ. YOU WILL FRY YOUR MOTHERBOARD
---If i have help, well you know the button to push---
THEindian said:
I would get SetCPU, then you probably are fine up to 1.4 ghz. I really can't recommend pushing it higher because there isn't a noticable performance increase. I use SetCPU and i am clocked at around 122Mhz-1.3Ghz with a screen off profile of 122-768Mhz and a temperature profile of 32C> 122Mhz-1.0Ghz.
I know, a lot to take in but i get really good battery life with that stuff. If you get SetCPU, experiment.
Also, here are the take away messages.
1. USE SETCPU, ITS AWESOME
2.DON'T PUSH IT TO 2GHZ. YOU WILL FRY YOUR MOTHERBOARD
---If i have help, well you know the button to push---
Click to expand...
Click to collapse
Lol I looked for the free download from xda for setcpu and found the thread but not the download. Will look harder now though!
Sent from my HTC Glacier using XDA
Lol, its a paid app, i can't encourage pirating,,,Its only 2 or so dollars though so buy it and support the devs
It's free or was on xda. The developer puts the free version on here. No pirating.
Sent from my PG86100 using XDA App
THEindian said:
Lol, its a paid app, i can't encourage pirating,,,Its only 2 or so dollars though so buy it and support the devs
Click to expand...
Click to collapse
Dude its free to xda members from what I hear but is a paid/donate version on market. If only I had a credit card...
Sent from my HTC Glacier using XDA
I prefer nofrills cpu control. It's also free.
Sent from my HTC Glacier using xda premium
I have been running at 1.2 for a year now and no problems whatsoever. Actually, what I have found has helped performance was to set the minimum CPU a little higher. It allows for a little less lag while your CPU is "spinning up." (I mean at 230, not at 500 or something)
1.2 is a very stable Overclock. You shouldn't run into any problems with that setting. Anything above 1.5 I wouldn't mess with, and you probably wouldn't see much of a real world speed increase from it anyway.
Sent from my HTC Glacier using Tapatalk 2
morbidmrmartin said:
1.2 is a very stable Overclock. You shouldn't run into any problems with that setting. Anything above 1.5 I wouldn't mess with, and you probably wouldn't see much of a real world speed increase from it anyway.
Sent from my HTC Glacier using Tapatalk 2
Click to expand...
Click to collapse
+1
Not to mention battery life goes in the toilet at high clockspeeds
Hey guys with all the quadrant scores being posted everywhere, I haven't seen a topic dedicated to these alone. So that's what this thread is for. Here are the rules:
Rule 1: when you post a quadrant please tell everyone what Rom/Kernel you are running so if anyone wishes to follow your steps they may do so.
Rule 2: Please merge your posts if your going to post one after another or simply edit your post and update it to maintain order.
That's it. Thanks guys and here is my quadrant. AOKP 40.1 devil .97 with v6 super charger and kak
Sent from my SCH-I500 using xda premium
It's a freakin' rocket-sled from hell it is!!
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Azuma73 said:
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Click to expand...
Click to collapse
Hey azuma how did you get your CPU so high? Also I need you to test something for me. Antutu tels me I'm pulling over 3200 in a quad. But quad pro tells me just over 2600. I'm unsure which to believe
Sent from my SCH-I500 using xda premium
I believe antutu runs more tests than quadrant, therefore showing a higher score, but I could be mistaken?
My phone IS fast and stable, but now I think I need to work on better battery!?
Sent from my SCH-I500 using xda premium
Dim your screen. Go to (I think development) and put a chexk in kill background processes and leave no programs running. I also use toolbox pro to freeze apps that continuously run and use the mobile web version of them.
Sent from my SCH-I500 using xda premium
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: smartassV2
min-max frequency: 200-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
Yeak I got a couple for ya.
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
vrahn said:
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
Click to expand...
Click to collapse
Ok I believe the Force GPU rendering definitely made the biggest difference. My 2d and 3d scores jumped up. I updated my post. For some reason in the ROM controls it took a couple tries for the new cpu and governor settings to stick after reboot.
5042 on my stock rooted gs3
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
ATRIXXIRTA said:
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
Cm7 turns this phone into one of the beastlyiest devices going. Not sure if beastlyiest is a real word, but its a good way to describe the awesomeisity of Cm7.... haha I'm a grammar god!!
Sent from my MB860 using xda app-developers app
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
MunkyDrunky that still seems a little low considering what everyone else is pulling. Try this as well. And I'll include the files from my phone when I get to my computer with instructions.
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Click to expand...
Click to collapse
Ok Ive used Rom toolbox when I was using the Gummy rom. Would I still use devil kernel config or manager for the cpu and ram free value changes? How do I make sure the changes will always stick, ive had trouble with that after reboot.
vrahn said:
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
I should say my running apps are usually not many. Right now its Rom Control, Android keyboard, Maps, Nova Launcher, and Rom Toolbox, and Superuser. I test my gps a lot with Maps. Otherwise I dont have a lot running since this isnt my daily use phone. I want it to be again but want to get it flying first.
Thank you for the good advice and help. Trying SD boost now...will try v6 and 3g speed boost later
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
rjkxb2 said:
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
Click to expand...
Click to collapse
i also get very low scores on my fascinate.
What settings are you using with v6
Sent from my SCH-I500 using xda premium
vrahn said:
What settings are you using with v6
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
fix emissions, 3g enhancements, wheel alignment, minfrees: 8,14,55,70,85,100 MB. It says I'm 100% supercharged. I feel like there has been an improvement I'm just thinking I may have missed some setting that would help even more.
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
sageDieu said:
View attachment 1195920
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
I hit 5694 with mine today