Related
I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!
hallamartin said:
I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!
Click to expand...
Click to collapse
I would get another ROM and reflash it, whether it's a ZIP ROM (CWM) or a NAND ROM via DFT.
it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work
hallamartin said:
it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work
Click to expand...
Click to collapse
Well there's lots of good roms out there... they are all very easy to flash back and forth from. I hate to say which one is "better" than another as that is purely subjective and everyone has a differing opinion. However, it seems a lot of people really like Sergios, MDJ's and CMYXLGO's ROMs. As a start you may want to check out one of those... Here is a link to the main Android NAND forum.
I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/
hallamartin said:
I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/
Click to expand...
Click to collapse
If it turns on and will boot to the bootloader, it's fixable So don't worry that much! Try out Sergio's ROM. It supports CWM. If you do use that one be sure to back up your SD card as you have to repartition it.
The steps to install it are:
Code:
HD2 COREDROID Desire HD V1
1. Extract downloaded zip to a folder of your choice
2. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
3. Boot into magldr and select USB Flasher option while phone is connected to PC
4. Run DAF.exe included in the zip and follow onscreen instructions.
5. After complete devise will reboot in magldr chose "Boot AD SD" option
6. Device will boot into Clockwork Recovery
7. Select advanced
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
11.Wait for the process too finish (do not restart device stay in ClockWork recovery)
12.Connect the Device into USB
13.select mounts and storage
14.select mount USB storage
15.Copy contents of copy_to_sd_root (initrd.gz, zImage) to the root of your sd card
16.Copy CoreDroid_HD_HD2_v*.zip to the root of your sd card
17.Press back key after finish
18.Press back key once more
19.Select install zip from sdcard
20.Select choose zip from sdcard
21.Select CoreDroid_HD_HD2_v* file and then confirm
22.Wait for it too finish
23.After flash options pop up again Press back Key
24.select reboot system now
25.Let it boot wait about +-10Min Enjoy
I haven't really examined the guide you followed that much, but make sure you have installed a recent version of Magldr (i.e. the one you can download in the official Magldr thread in the WinMo subforum, version 1.11 to be precise). The first version(s) have been notorious for the Gogogo! bug persistently affecting some users.
Just a fyi, ignore this if you already have this v1.11
I got the aMagldr V1.11
The rom you sendt me doesnt work, it stopps here:
Run DAF.exe included in the zip and follow onscreen instructions.
i allredy installed a Daf.exe can that be the problem?
hallamartin said:
i allredy installed a Daf.exe can that be the problem?
Click to expand...
Click to collapse
No, because it's not really an installer, but a flasher. I'm not really an expert on the CWM issues, but it seems to me like formatting your SD card(do a full format, not the quick one) might help you, since it's quite probably your SD card being the *****.
It may not help you, but if you've got a few minutes I'd say give it a shot. Don't forget to backup important SD (NAND isn't affected) first of course!
Oh, and there's also this small chance that your CWM download is corrupt. Not sure if that would give the gogogo error though.
Sorry for being a complete newb, but how do i do the hard format?
but do i need the DAF.exe to install the rom?
You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
DAF.exe is the tool which flashes CWM to your phone. Some other tools and/or ROMS use the same name for their flasher though.
after this one :
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
i can't do **** i cant open the device in windows. is there no way i can just system recover the whole device? or do i have to rom it?..
realy need this to be working, prefer android but windows is okey
StephanV said:
You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
Click to expand...
Click to collapse
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?
hallamartin said:
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?
Click to expand...
Click to collapse
It sure is no brick, as long as you can boot into bootloader (turn on phone while keeping volume down pressed) there's no problem at all. No need to return it either.
If you feel really desperate try the WinMo thing, you've got nothing to lose except for about 30 minutes of your time.
winmo thing? is there any guide?
if i download a format program i can format the sd card..
1. Flash WinMo, this should be no problem in bootloader
2. I think it's possible to format your SD card within WinMo. I've never used WinMo actually so I can't give instructions on that.
If you can't find it or if it isn't possible, mount your SD card so you can see it in Windows. Backup data if necessary. Then right click on it (in Windows), and choose format, then disable quick format which should be selected by default. After the format you should have a clean SD card.
4. Flash Magldr again, following instructions in the official Magldr thread. Download a new copy off xda, to eliminate the possibity of just having had a corrupt download.
6. Flash CWM, following instructions in the official CWM thread.
7. Flash ROM.
Edit: I used WinMo where I meant the mobile OS, and Windows where I meant the pc OS.
I did format the SD card, nothing new just that CWM disapeard.
Now its loading with aMagldr v1.11
And i Have Spl-2.08. Hspl 8g Xe
Can anyone send me a link to a good Win 6.5 rom and anykind of guide?
Just got an HD2,coming from my Hermes.
It's like going from a 19" monitor to a 32" monitor
Not new to flashing as I've been doing it for years on my Hermes,radios and roms.
New to the HD2 obviously so I need to get some things clear before I proceed.
Flashed HSPL 2.08 already.
I believe I need this version so that I can run android and win7?
Flashed my 1st rom,an energy one.
All is well except I'm not really keen on win 6.5 anymore.
Although most of my cabs work which is great
I want to try win7 and android.
Android
3 versions?
nand=runs from the phone?
magldr=?
SD=runs from the SD card?
Win7
Not quite sure as I've not read that far yet
Is flashing win7 same as flashing a win6.5 or do I need to do something extra?
Dual boot is working with HD2 or not?
Gen.Y DualBOOT v1.0.6.0 says no in the initial post.....
"Just to clear up the most asked question in this thread, this app will NOT work with the HTC HD2, because there is no android distro available yet for that platform (SnapDragon)"
....but that was over a year ago.
Anything else I need to know?
Your right on it all, magldr you install from the tri colour screen, its where Android is installed from on the nand, then you will need clock work mod, this is basically Android recovery, you can create back ups of your roms and also install Android roms directly from SD,
Win 6.5 is the past
I've not really done much with win7 Android is the way forward,
Gingerbread is the latest version of Android.
Look for clk versions in the Android nand thread
Clk = clockwork
Probably get started with
http://forum.xda-developers.com/showthread.php?t=769026
I've been on Android for a while now, the last time I dual booted I ran Win 6.5 from nand then I loaded android from SD
I'm using miui its a total re write and everything is themeable but is get used to Android first
Anything else
Sent from my HTC HD2 using Tapatalk
Hd2 toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
That will help, you will need to update your "leo_radio" aswell
Sent from my HTC HD2 using Tapatalk
Miui is here
http://forum.xda-developers.com/showthread.php?t=1117787
Sent from my HTC HD2 using Tapatalk
Thanks for all them
Not too sure how to 'flash' to an android?
or to load the cLK?
they come as disk image files (.img)
They come as .zip files.
Find the clk thread and learn how to install it, then you simply put the. Zip file on your SD and load clk then install Android from the zip
Sent from my HTC HD2 using Tapatalk
Ok
I'm going to use the Hd2 toolkit,this also cLK's my device.
Why does it need to partition my device and what's a good size?
I seem to have ran into some bother with fastboot command when doing cLK for dummies.
I'm getting.......
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
It partitions some of your SD to ext4 to make more internal memory for apps
I was about to write you a walk-through but I've stole this instead follow it step by step
Sent from my HTC HD2 using Tapatalk
langthang;12431253]How to flash ROM:
HD2 NAND Toolkit - Toolkit for HD2 Users (From ksubedi)
Use MAGLDR
1. Your phone need HSPL 2.08.HSPL first
2. Flash DFT_LEO_MAGLDR113_DAF
Link download MAGLDR113
- Go to Bootloader
- Connect your phone to PC
- Run ROMUpdateUtility.exe and follow guide step by step
- Phone auto reboot and goto MAGLDR113 menu
- Done
3. Flash Recovery
Link download newest Recovery 3.0.2.4: thanks seadersn
http://www.mediafire.com/?f81pamq6fbjmtw5
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
- Choose AD Recovery to go Recovery Menu
4. Wipe full data and Advance - Dalvik cache on Recovery Menu is recommand
- If you update from previous version, only need wipe cache/dalvik cache and all your data will saved
5. Flash ROM use Recovery
- Choose Install zip file from SD card
- Follow the guide
- Press Call button (Green button) to accept - Reject button (Red button) to Cancel
6. Reboot and see your result
Use cLK
Follow the guide in here:
http://forum.xda-developers.com/showthread.php?t=901305
Very easy way to prepare flash ROM use Tools here:
http://forum.xda-developers.com/showthread.php?t=1090783
How to enable Data2EXT in MIUI GINGER ROM (Thanks droidzone about these scripts):
Note: This feature require high speed SD card (Class 6 or higher) for best performance, the slower SD card work but the ROM is slow down
1.Partition your SD card
- Format SD card
- Create EXT Partition. There is the easy way to create EXT Partition by CWM Recovery:
+ Goto Recovery Menu
+ Cho Advanced -->Partition SD Card
+ Choose EXT size (Maximum is 2048Mb) and Swap size (Recommand is 128Mb)
+ Waiting until Done
2. Install Data2EXT feature:
- Install your ROM by CMW Recovery
- Install the A2SD Killer scripts file (attach file bellow)
- Reboot once after running the A2SD Killer and setup everything but don't install anything.
- Reboot to recovery once again and install the Data2SD Installer (attach file bellow)
- Reboot again and see result
ReInstall Data2EXT procedure:
http://forum.xda-developers.com/showpost.php?p=12999815&postcount=1744[/QUOTE]
Sent from my HTC HD2 using Tapatalk
Sent from my HTC HD2 using Tapatalk
Just can't seem to be able to install the recovery image.
Not getting past fastboot commands in windows
Going to try through android sdk...........
Have you installed windows drivers? And ran as admin?
Sent from my HTC HD2 using Tapatalk
whynot66 said:
Have you installed windows drivers? And ran as admin?
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
yes
placed the fastboot.exe and AdbWinApi.dll in the folder and it just sits there saying 'waiting for device'.
When you boot your hd2 into magldr then you scroll to "usb flasher" whilst usb is connected to pc? What happens, does windows recognise the device? Does it install drivers?
Sent from my HTC HD2 using Tapatalk
Download this http://www.mediafire.com/?f81pamq6fbjmtw5
Don't change anything in the folder just boot magldr click usb flasher connect usb and run daf.exe
Sent from my HTC HD2 using Tapatalk
whynot66 said:
When you boot your hd2 into magldr then you scroll to "usb flasher" whilst usb is connected to pc? What happens, does windows recognise the device? Does it install drivers?
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Went down the cLK route.
whynot66 said:
Download this http://www.mediafire.com/?f81pamq6fbjmtw5
Don't change anything in the folder just boot magldr click usb flasher connect usb and run daf.exe
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
I'll try that,thanks.
Ok both went well but not sure how to flash a magldr?
One says enter usb flasher and then run daf.exe in the rom but I don't see that in the rom I downloaded....CM7-v2.1.0-MAGLDR-CWM.zip
phone is sat in the magldr boot screen?
tried putting the rom onto the sd card with usb mass storage which went ok.
fails to flash when using boot AD Sd
load zimage
sd kernal open failed
it's a zip file?
__________________________________
Ok found another post that explains things a bit better,let's see what happens.......
The daf thing is old, now almost 99% of the ROMs use ClockworkMod. When you're on MAGLDR screen, using the volume rockers, go to USB flasher and select it by pressing the call button. Run the Android Toolkit and choose MAGLDR repartion, and select 150mb partition size from the left panel then click "Repartition" . After it finishs, go to magldr and choose "Android Recovery" or something similar, it will get you in an orange texted screen (CWM) . put the file you downloaded on your sd card and choose flash zip file, then choose it and let it do its thing .
kawazaki said:
The daf thing is old, now almost 99% of the ROMs use ClockworkMod. When you're on MAGLDR screen, using the volume rockers, go to USB flasher and select it by pressing the call button. Run the Android Toolkit and choose MAGLDR repartion, and select 150mb partition size from the left panel then click "Repartition" . After it finishs, go to magldr and choose "Android Recovery" or something similar, it will get you in an orange texted screen (CWM) . put the file you downloaded on your sd card and choose flash zip file, then choose it and let it do its thing .
Click to expand...
Click to collapse
Thanks for that
I'd just found that out.
Running Android now.
Thank guys I'm a flashaholic now
How do I get my music etc onto my SD card without booting into magldr?
Just plug the wire in whilst I'm android, you'll get a notification slide the top down and mount it
Sent from my HTC HD2 using Tapatalk
hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
edit:i tried to restore and it says md5 mismatch
thanx
If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.
Khan_ said:
hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
Click to expand...
Click to collapse
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...
Click to expand...
Click to collapse
its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.
i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo
Click to expand...
Click to collapse
which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshooting
went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
Click to expand...
Click to collapse
stuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
edit:i tried to restore and it says md5 mismatch
Click to expand...
Click to collapse
theres a few threads about fixing md5 sums, read them yet?
thanx
Click to expand...
Click to collapse
i would suspect a dodgy sd card, but thats only a first general guess based on little information.
icke said:
If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.
Click to expand...
Click to collapse
did that no luck
samsamuel said:
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshootingstuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
theres a few threads about fixing md5 sums, read them yet?
i would suspect a dodgy sd card, but thats only a first general guess based on little information.
Click to expand...
Click to collapse
ya as i said i did alot of search with no luck .
so finally i just installed
Code:
XXX.jayceooi.com/2011/01/14/how-to-install-windows-phone-7-on-htc-hd2-video/
but srsly i dont like but atleast it ws very simple to install,is there any way to install nand android just like this cuz i didnt find any
again thanx for replies guys
let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully
I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium
It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun
gdsbalaji said:
let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully
Click to expand...
Click to collapse
i really appreciate that bro ...yeah i really want android back on my hd2
kylew1212 said:
I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
i ll look into it definitely.
Taco123 said:
It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun
Click to expand...
Click to collapse
HSPL version is 2.08 i dont know about that radio version but i tried installing radio from provided in "easyandroid by kevin" and it also got stuck on 0%.did task 29 installed magdlr 1.13 and CWR 3.2.0.0 (also tried the latest version of CWR 5.0.2.8 i think) formated sd card did a partition as well mounted usb storage from ad recovery rebooted it the again went to ad recovery and pressed choose from sd card it goves me that error "installation aborted.
just a quick question i have these roms on my computer
http://forum.xda-developers.com/showthread.php?t=905060
http://forum.xda-developers.com/showthread.php?t=1013852
what should be the neccesary steps to install these i read the both developers guides but there is something that i am missing...
i hv DFT windows 7 installed on my hd2 so what should i do to get android back.
what is Clk i did not installed that in my view was clk is same thing like magdlr so i skipped installing that n i had (hspl 2.08,magdlr 1.13 and cwr 3.2.0.0) only
is this the problem causing?
regards
here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
gdsbalaji said:
here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
Click to expand...
Click to collapse
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files again(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.
Khan_ said:
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.
Click to expand...
Click to collapse
good luck.
gdsbalaji said:
good luck.
Click to expand...
Click to collapse
everything worked smooth untill the final test
i mounted usb storage copied HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR clicked power button selected install zip from sd card then selected choose zip from sd card selected HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR and selected Yes .
it says
installing :/sdcard/HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
Finding update package
Opening Update Package
E:cant open /sdcard.HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
(bad)
installation aborted
same old issue what i was getting.
edit:it was the sd card ...i changed the sd card copied rom and installed it smoothly thanks a ton bud i really appreciate the help u gave .God bless ya
Glad it worked dude...hv fun
Sent from my HTC HD2 using XDA App
HOW TO flash WP7 after having Android on my HD2
1. Task29 (and format SD Card too)
2. Install Radio
3. Install a WM6.5 ROM.
Then, checkout xboxmod instructions:
----How to Update: ----
-1st it's recommended to flash an old rom wm 6.5 and let it boot entirely
-Format your SD card too
-Flash magldr 1.13
-Enable 24MB extra memory in Magldr services
-Delete MBR of SDcard in Magldr services
-Flash the rom with DWI & Set a correct time & date.
-Install the lastest version of zune client.
- You can Run the zune update process like a real WP7 device & go to build 8107.
-but it's better to look the cab thread and install os update via cab this is really faster than zune.
Update Cab tweak thread
Flash WP7 after Android
It's pretty simple I've done this several timez cuz android sukz on my HD2 -.-
You need to wipe all your data on you Flash memory of yuor Phone. So Wipe (Task29) all your data, you can do this with the HD2 Toolkit From Here. After you have done this make shure you've got the correct Radio for WP7. Now you go into bootloader (power+vol down) and install MAGLDR (i guess you know how to install this). When you Phone reboots into MAGLDR select Services->UseLast24MB NAND [something like that] and after that choose USB Flasher from MAGLDR Main menue to flash the WP7 ROM you have choosen. I also recommend you to clean up your SD Card before flashing (delete all patitions and data)
I hope it helped you out. If you have further questions let me know i try to reply.
i recommended you Pdamatejam ROM, not Yuki....
Yuki ROM lock SD cards (dont forget this)... Pdamtejam also can update with CAB's files
http://forum.xda-developers.com/showthread.php?t=1356833
look in my signature... you have all there.... also read tutorial.... you find all links which you need (task29, MAGLDR, ROM, radio's)
neji4ever said:
It's pretty simple I've done this several timez cuz android sukz on my HD2 -.-
You need to wipe all your data on you Flash memory of yuor Phone. So Wipe (Task29) all your data, you can do this with the HD2 Toolkit From Here. After you have done this make shure you've got the correct Radio for WP7. Now you go into bootloader (power+vol down) and install MAGLDR (i guess you know how to install this). When you Phone reboots into MAGLDR select Services->UseLast24MB NAND [something like that] and after that choose USB Flasher from MAGLDR Main menue to flash the WP7 ROM you have choosen. I also recommend you to clean up your SD Card before flashing (delete all patitions and data)
I hope it helped you out. If you have further questions let me know i try to reply.
Click to expand...
Click to collapse
Whats the best wp7 rom out there?
Hi,
I am not very experienced with android installation and after trying few times now the phone is maybe bricked?
I only have cLK black screen with some lines of text (such as MsDOS prompt).
How can I fix it?
I would like to install either Windows 7 or Android 4.04.
Which one is better/faster?
But first I need to fix the phone if possible?
hrcoprco said:
Hi,
I am not very experienced with android installation and after trying few times now the phone is maybe bricked?
I only have cLK black screen with some lines of text (such as MsDOS prompt).
How can I fix it?
I would like to install either Windows 7 or Android 4.04.
Which one is better/faster?
But first I need to fix the phone if possible?
Click to expand...
Click to collapse
The screen you see with the text is just clk it self. Because you do not have a ROM for clk to boot you are seeing this screen. Click on the HD2 guid in my link and it will walk you through how to instll Clockwork Mod Recovery so you can flash a ROM. Or ypou can use the HD2 NAND Toolkit to flash Clockwork Mod Recovery. Or you can also just download the latest version of clk that is also linked in my guide also as it already has Clockwork Mod Recovery included with it.
Thanks for help and info.
I guess this is the link you are referring to:
http://forum.xda-developers.com/showthread.php?t=1021837
?
There are so many options, I have no idea where to start? What is the most simple solution? And how do I put Android on it?
Also, I am not sure if my battery is about 30% full, is it possible to charge it before I proceed. The red light does not come on.
Thanks
Hi
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this steps.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb primary (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 (it must be primary again) section. insert it into your HTC device.
1. do task29
2. install radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
Choose a proper win 6.5 ROM for you and, check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
HD2Toolkit ; it contains Task29, Magldr, Recovery, Clk and HSPL tools.
www.mediafire.com/?2qz0xa7xfxney47
Radio ROM 2.15.50.14;
www.mediafire.com/?1th8o158r2t6dba
Or more simple one
-Take any "RUU_signed.nbh" from an original win 6.5 ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
regards...
Sorry guys, it sounds to complicated to me.
How do I format those partitions?
Any software?
do I do it from PC?
my phone is not working at present
I would like to install latest android though.
Regards
http://www.youtube.com/watch?v=PLxiKkmXHVQ&feature=related
Yes you can do it from your PC. Please watch this video. It will give you some instruction.
Or read this one, cause more easy..
http://forum.xda-developers.com/wiki/SD_card_partitioning
This is the link what you want;
http://www.partitionwizard.com/download.html
**Download "Home" edition.
And please use "Thanks" button.
Regardss.
powerofthink said:
http://www.youtube.com/watch?v=PLxiKkmXHVQ&feature=related
Yes you can do it from your PC. Please watch this video. It will give you some instruction.
Or read this one, cause more easy..
http://forum.xda-developers.com/wiki/SD_card_partitioning
This is the link what you want;
http://www.partitionwizard.com/download.html
**Download "Home" edition.
And please use "Thanks" button.
Regardss.
Click to expand...
Click to collapse
Will do that now, it seems easier now.
What to I do in order to install latest android?
Step by step if possible?
Regards
Which Android ROM do you have in hand? Did you look for any android ROM, or which one do you want?
Some steps depends on your ROM which you have chosen.
I am still using an old Android ROM. You must choose a ROM firstly.
First off all the SD card partitioning is not needed to get Android running on your HD2. No offense to powerofthink but they are making this way more complicated than it has to be. The only real thing you need to be sure of is that your SD card is formatted with Fat 32, But most SD cards come formatted this way.
Now download clk 1.5 by Rick_1995, from his clk thread. This version already has Clockwork Mod Recovery included in it so you will have CWM when you flash this file. You flash it just like you flashed the other versionn of clk you flashed before.
Next download the ROM of your choice. Then boot into CWM by holding down the home button while you boot your HD2 up. When you see CWM appear on the screen use the volume buttons to scroll down to "Mounts and storage" and press the send button. Next connect your device to your computer via USB cable and then scroll down to "-mount USB storage" and press the send button. This will allow you to transfer your ROM's .zip file to your SD card by allowing your computer to mount your SD card as a removable. Go to the Windows Start Menu and click on computer and you should see your SD card listed as a removable drive, click on it then copy and past your ROM .zip file to your SD card. Once you have your ROM transferred to your SD card go back to your device and go back to the main menu of CWM by pressing the back button on your device. This will on mount your SD card from your computer. Next scroll down to "-install zip from sdcard" in the main menu of CWM and press the send buttonn. Then scroll down to "-choose zip from sdcard" and press the send button. Now scroll down until you see the .zip file for your ROM and select it by pressing the send button. Select yes in the next menu and let the ROM install. After the ROM is done installing use the back button to go back to the main menu of CWM and select reboot now. Then just let yopur device boot all the way up to the lock screen of the ROM and unlock it and go through the setup.
It is no need to partion when you use clk because clk does all the partitioning for you, unlike MAGLDR which you have to manually re partition manually when you change ROMs.
well I would like to install latest 4.04 ice cream sandwich, but modded for speed if possible?
my card is formatted in fat32 8gig.
Any links for that sort of ROM including procedure for beginners?
I am even more confused now
cheers
I can not do anything.
When I try to either use MAGLDR or cLK, phone responds more and less, but when it comes to progress bar it stays at 0% all the time regardless what procedure I want to do.
e.g.
Starting To Perform MAGLDR Installation
Setting Up Environment for MAGLDR
Starting Installation in 3
Starting Installation in 2
Starting Installation in 1
Checking phone for information!
Starting MAGLDR Installation, Check progress on Phone screen.
Is it a problem that I have cLK installed from before, in cLK progress is also at 0%.
I tried to use official Windows ROM 6.5 from HTC page but does not work too.
Did I brick the phone?