Related
SOLVED!!!! I had a look at http://forum.xda-developers.com/showthread.php?p=5954764
and my phone is back to live!!
Thank you guys for your help.
Hi,
I have a GSM512 HD2 with HSPL installed.
I have been flashing fine Miri's 6.5.X ROMs on my HD2.
Today I tried to flash this ROM
RUU_Leo_SKT_KR_1.74.911.2_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Test
via MicroSD card.
(I copied the .nbh file onto my microSD card and renamed it to LEOIMG.nbh).
But while it was on the progress of flash,
the flash failed in the middle of the progress.
Then, everytime I try to turn on the phone, I'm stuck at the tricolor screen,
which says
HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Is there anything I can do?
Now the computer can't recognize the phone via USB connection, so I am not able to access the microSD card!!! I can't seem to find any way to access the card and put a shipped ROM and flash it again.
I have no microSD card reader at home..
Please help!!!
Use Custom RUU to flash HSPL again and then flash again MIri's Rom using Custom RUU
typed brick in the search bar on here..the fix is simple..
RUU_Leo_SKT_KR_1.74.911.2_Radio_15.37.50.07U_2.10. 50.08_2_Signed_LEO_Test
where did you get this?
giacominos said:
Use Custom RUU to flash HSPL again and then flash again MIri's Rom using Custom RUU
Click to expand...
Click to collapse
The problem is that the computer cannot recognize the USB connection, so Custom RUU can't work.
Anyway, I've just bought a microSD card reader and I'm downloading a shipped ROM and I'll try to see if my phone can go back to live by flashing the shipped ROM from the microSD card.
Sultan1993 said:
RUU_Leo_SKT_KR_1.74.911.2_Radio_15.37.50.07U_2.10. 50.08_2_Signed_LEO_Test
where did you get this?
Click to expand...
Click to collapse
I got the test ROM here http://www.mobileunderground.info/showthread.php?t=94&p=33884
5pteron said:
The problem is that the computer cannot recognize the USB connection, so Custom RUU can't work.
Click to expand...
Click to collapse
It's weird, are you sure of that? If you put your mobile in boot mode, connect it to your pc at the bottom ( white stripe ) does it say usb or serial? ( If It says Usb the phone is recognized don't expect to see anything on your PC) Anyway maybe you can solve with a card reader
giacominos said:
It's weird, are you sure of that? If you put your mobile in boot mode, connect it to your pc at the bottom ( white stripe ) does it say usb or serial? ( If It says Usb the phone is recognized don't expect to see anything on your PC) Anyway maybe you can solve with a card reader
Click to expand...
Click to collapse
You mean Pressing down the vol bottom and turning on the power button?
Yeah at the tricolor bootloader thing, it doesn't say that when I connect the phone to computer via USB cable.
In addition to
HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
at the bottom it will also say
'Upgrade ROM code error
please try again'
and then very fast it will go into an eternal gray screen with 'Loading...' on it.
take a look here http://forum.xda-developers.com/showthread.php?t=502167 I think that's the same issue that you're experiencing and it was solved
giacominos said:
take a look here http://forum.xda-developers.com/showthread.php?t=502167 I think that's the same issue that you're experiencing and it was solved
Click to expand...
Click to collapse
No,
The ROM has a diffrent CID from what your device is allowed to have.
You need to flash the original ROM what came with ur HD2.
Or else use a goldcard and reflash any official stock rom again.
That's it, nothing to be worried about.
Why are all the shipped ROMs out there in InstallShield exe format? When I open the exe files, the inside files (.nbh, etc.) do not show up!!!
I would really appreciate if anyone can redirect me to an URL that downloads a shipped LEO ROM that is extractable, or even better, the RUU_Signed.nbh file itself.
I'm looking at almost an end to get my phone back to live, but because of this other paltry sh*ts, I'm getting tired.
5pteron said:
Why are all the shipped ROMs out there in InstallShield exe format? When I open the exe files, the inside files (.nbh, etc.) do not show up!!!
I would really appreciate if anyone can redirect me to an URL that downloads a shipped LEO ROM that is extractable, or even better, the RUU_Signed.nbh file itself.
I'm looking at almost an end to get my phone back to live, but because of this other paltry sh*ts, I'm getting tired.
Click to expand...
Click to collapse
Right click on the exe file and select "Extract here" to unpack the files and there you will have the nbh file
ClydeB1 said:
Right click on the exe file and select "Extract here" to unpack the files and there you will have the nbh file
Click to expand...
Click to collapse
The exe file was not an extractable file as it was packed in InstallShield.
Anyway, I extracted the files using an InstallShield extractor called 'Universal Extractor.'
Here is another problem though.
After extracting the .nbh file from the shipped HTC HD2-RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2
and renaming the file to LEOIMG.nbh and copying the file to Storage card
and pressing volume down and pressing power button,
it will still load into a bootloader that won't flash, but says this below:
RUUNBH
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Upgrade ROM code error
Please try again
Serial
and to say it one more time, I can't turn on the phone but the erratic bootloader screen, and I can't connect the phone to ActiveSync or WMDC. Also I tried to Hardreset but while it says Hardreset successful, I still can't turn on the device (the phone does turn on, but goes onto that erratic bootloader screen).
And the shipped ROM I tried is a rather random one, because my phone is a debranded one that I don't know the specific ROM the phone came with.
So far thank you for your help, and I will appreciate further help.
The straightforward question from me:
What is the official shipped ROM that is flashable via SDcard on any debranded HD2 without HSPL?
5pteron said:
The straightforward question from me:
What is the official shipped ROM that is flashable via SDcard on any debranded HD2 without HSPL?
Click to expand...
Click to collapse
Try one of these - http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html. I think it is dependent on your region however and not just that the device is unbranded.
Solved!! This method worked for me!!
A bunch of thanks to hdpsytes for this.
Oh, and thank you every one, too
hdpsytes said:
1 - Download an official rom.
2 - Download HxD Hex Editor from here: http://download.cnet.com/HxD-Hex-Editor/3000-2352_4-10891068.html?tag=mncol
3 - Download the Goldcard image: (thanks Ancola66) http://forum.xda-developers.com/attachment.php?attachmentid=287634&d=1267433544
4 - Create the Goldcard:
Open HxD Hex Editor
Go to Extra tab> Open Disk. Under Physical disk, select Removable Disk (SD card), uncheck "Open as Readonly), click OK.
Go to Extra again, Open Disk Image, open up goldcard.img
Press OK when prompted for "Sector Size" 512 (Hard disks / floppy disks)
-Now, you should have two tabs, one is your removable disk, the other is goldcard.img
On goldcard.img tab. Select All> Copy.
On the "removable disk" tab. Select offset offset 00000000 till 00000170 (including the 00,000,170 line), click on Edit tab and then Paste Write.
Click on File> Save. Now you can exit the program.
5 - After that try load the official rom with the Card in. Or load by SD.
Sorry for my English
Good luck.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=5954764
This fix from the HD2 TMOUS_1024 section appears to allow Telstra users to finally use HSPL2.
Thanks to bgcfb - http://forum.xda-developers.com/showpost.php?p=6855002&postcount=1 and to samsamuel for pointing this out .
Although this fix is for the TMOUS device, it has been confirmed to work on a Telstra device by tvailment and using HSPL2 he was able to load 1.66.hspl - http://forum.xda-developers.com/showpost.php?p=6872412&postcount=1866
Step1: Create a text file named ModelIDCheckBypass.txt and save it to C:\
Step2: Edit the text file to contain the following entry - PB81110
Step3: Save file and set as Read Only
Step4: Run HSPL2
This has now been confirmed to work by a few more users (see below)
PS! I'm only referencing this fix here as I know many Telstra users want to be able to use HSPL2 and have not been able to. I take no responsibility for anything that may go wrong with your device as a result of bypassing the modelid check within HSPL2 - so use at your own risk.
Telstra T9193 SPL 1.66.0000
Dear ClydeB1,
I know you have been great on the Board. I did try what've been said on creating ModelIDCheckBypass.txt and so on.
When I run HSPL2_RUN, it still give me Err 0000004, Bad Model ID, etc.
Any advice?
lol actually worked haha
Thanks a million!
Confirmed this works 100% on Telstra T9193.
I tested both 1.66 and 2.08 and both work.
(Just wondering why this hasn't been posted by Bepe....it's obviously something coded into the exe to check for bypass).
the_scotsman said:
Thanks a million!
Confirmed this works 100% on Telstra T9193.
I tested both 1.66 and 2.08 and both work.
(Just wondering why this hasn't been posted by Bepe....it's obviously something coded into the exe to check for bypass).
Click to expand...
Click to collapse
Yes ... that omission has caused a lot of grief
Still, it works, so newer ModelID's can be HSPL'd and customised now
For those still unsure, the Telstra T9193 ModelID is PB81110
Thanks for the heads up, worked beautifully. I now have HSPL1.66
Thank you ClydeB1, Just flashed 1.66...worked perfectly.
using 2.08 beautifully
Thanks to all who have tried and confirmed working. Great news for all Telstra users who can now finally use HSPL2.
wyen2002 said:
Dear ClydeB1,
I know you have been great on the Board. I did try what've been said on creating ModelIDCheckBypass.txt and so on.
When I run HSPL2_RUN, it still give me Err 0000004, Bad Model ID, etc.
Any advice?
Click to expand...
Click to collapse
In bootloader, what model id do you have? It should be in the format of PB81xxxx.
Worked!
Woohooo....worked on my Telstra T9193 model....thanks mate.
works fine in my Telstra HD2 Device..
the_scotsman said:
Thanks a million!
Confirmed this works 100% on Telstra T9193.
I tested both 1.66 and 2.08 and both work.
(Just wondering why this hasn't been posted by Bepe....it's obviously something coded into the exe to check for bypass).
Click to expand...
Click to collapse
My pleasure m8, I know you've been looking for this for ages, glad it worked.
callpartha said:
Woohooo....worked on my Telstra T9193 model....thanks mate.
Click to expand...
Click to collapse
bataHD2 said:
works fine in my Telstra HD2 Device..
Click to expand...
Click to collapse
Pleasure, thanks for confirming that it works. So far there only seems to be 1 person who hasn't been successful, but lots who have been.
Telstra T9193 SPL 1.66.0000 PB 81110
My model ID: PB81110 HX-BC
SPL 1.66.000 XE
ROM date 02/23/10
Steps I took:
1 - created a txt file ModelIDCheckBypass.txt in my user document folder,
2 - move the ModelIDCheckBypass.txt to C:\,
3 - make C:\ModelIDCheckBypass.txt Read-only,
4 - run Windows Mobile Device Center in PC Windows7,
5 - showed "connected" in Windows Mobile Device Center,
6 - Right-click HSPL2_RUN in user/administrator folder, and run as Adminstrator,
7 - DF file executed, click "next",
8 - showed "waiting for USB ..." in DF window,
9 - T9193 turned into tri-color boot mode,
10 - PC Windows lost Windows Mobile Device Center after showed "disconnected",
11 - .... showed "...Error 0..04, :Bad Model ID" in DF window
thanks,
wyen2002 said:
My model ID: PB81110 HX-BC
SPL 1.66.000 XE
ROM date 02/23/10
Steps I took:
1 - created a txt file ModelIDCheckBypass.txt in my user document folder,
2 - move the ModelIDCheckBypass.txt to C:\,
3 - make C:\ModelIDCheckBypass.txt Read-only,
4 - run Windows Mobile Device Center in PC Windows7,
5 - showed "connected" in Windows Mobile Device Center,
6 - Right-click HSPL2_RUN in user/administrator folder, and run as Adminstrator,
7 - DF file executed, click "next",
8 - showed "waiting for USB ..." in DF window,
9 - T9193 turned into tri-color boot mode,
10 - PC Windows lost Windows Mobile Device Center after showed "disconnected",
11 - .... showed "...Error 0..04, :Bad Model ID" in DF window
thanks,
Click to expand...
Click to collapse
I think you are missing this step - You need to enter the following text in the ModelIDCheckBypass.txt file - PB81110.
In step 9 after turning to tri-colour bootloader screen, does USB show up in the bottom section of the screen?
Telstra T9193 SPL 1.66.0000 PB 81110
Oh, I am so sorry forgetting to write it - I did have "PB81110" in the ModelIDCheckBypass.txt file.
When the T9193 turned into the tri-color bootloader mode, it did show "USB" on the top of the fourth white color band below the RGB tri-color band.
thanks,
Sorry bud, not sure what seems to be the problem with yours. I don't have a Telstra device so I can't recheck the steps but it is strange that it works for others and with yours for some reason the ModelIDCheckBypass is not working and that's why you still get the Bad ID error.
Are you 100% sure that you have named the file correctly, have the correct modelid (ie PB81110) in the file, you have saved it to the root of your pc hard drive (ie C:\) and that you have saved the .txt file as Read Only in the file properties and you are running HSPL2 from the C: drive (right click "Run as Administrator") ? Carefully check the spelling of the file name and the modelid.
EDIT: Use this attached file, save it to C:\
Successfully upgraded to 2.08HSPL. Been waiting for age
Thanks mates.
hpacura said:
Successfully upgraded to 2.08HSPL. Been waiting for age
Thanks mates.
Click to expand...
Click to collapse
Pleasure
Dont use the 1024 HSPL2 either, just the regular HSPL2 and it will work.
Hi,
I've just set up my HTC HD2 with Android - Froyo Stone sense...
I flashed it with the latest ROM from HTC website then installed HSPL3 and then upgraded the RADIO which allowed me to boot into Android...
It works quite well but freezes sometimes, not sure if anyone can help with that...
My real question is that when I try to turn the wireless on it just says error and doesnt do anything... Any ideas what might be up and how I can fix it...
When I hold down the volume button and power on the phone it says
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
And then on the HTC boot screen before Windows it shows the following.
R2.12.50 02~2
G15.40 50 07U
D1.7282124
Hope you can help.
Regards
Dave.
I've actually seen this before too. I'm on Miri with Bangers 1.3. I noticed it only happens when I use the actual power control widget but when I am in settings and I see error turning it on and off there get it work fine. I thought mine was a complication from using Juice Defender at the same time.
hillda01 said:
Hi,
I've just set up my HTC HD2 with Android - Froyo Stone sense...
I flashed it with the latest ROM from HTC website then installed HSPL3 and then upgraded the RADIO which allowed me to boot into Android...
It works quite well but freezes sometimes, not sure if anyone can help with that...
My real question is that when I try to turn the wireless on it just says error and doesnt do anything... Any ideas what might be up and how I can fix it...
When I hold down the volume button and power on the phone it says
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
And then on the HTC boot screen before Windows it shows the following.
R2.12.50 02~2
G15.40 50 07U
D1.7282124
Hope you can help.
Regards
Dave.
Click to expand...
Click to collapse
Searching would've eventually brought you to an answer about getting an Error message when turning on Wifi but...
Try this:
first copy bcm4329.ko on the root of your sd card (or just change the path name on the Terminal command to point to where it is)
On Terminal Emulator type (you'll also need Superuser for root access if you don't already have it):
su
mount -o remount rw /system
cp /sdcard/bcm4329.ko /system/lib/modules
Then go back and turn on Wifi from the settings.
i have the same problem on mdeejay 2.1a
wifi error. i try from settings and from power control widget, and from HTC wifi toggle widget. none work.
i did replace the file in modules. as well as the tun.ko from mitchyprima r11 (i have extended battery)
any ideas?
malaeus said:
i have the same problem on mdeejay 2.1a
wifi error. i try from settings and from power control widget, and from HTC wifi toggle widget. none work.
i did replace the file in modules. as well as the tun.ko from mitchyprima r11 (i have extended battery)
any ideas?
Click to expand...
Click to collapse
Did you replace it via terminal emulator. That's the only way I can ever get it to work.
hillda01 said:
Hi,
I've just set up my HTC HD2 with Android - Froyo Stone sense...
I flashed it with the latest ROM from HTC website then installed HSPL3 and then upgraded the RADIO which allowed me to boot into Android...
It works quite well but freezes sometimes, not sure if anyone can help with that...
My real question is that when I try to turn the wireless on it just says error and doesnt do anything... Any ideas what might be up and how I can fix it...
When I hold down the volume button and power on the phone it says
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
And then on the HTC boot screen before Windows it shows the following.
R2.12.50 02~2
G15.40 50 07U
D1.7282124
Hope you can help.
Regards
Dave.
Click to expand...
Click to collapse
do the homework
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
ibrahim-windeck said:
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
Click to expand...
Click to collapse
SPL 3.03 isn't compatible with HSPL sir.
But you can run Android on your Stock Rom 3.14!
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
somaking said:
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
Click to expand...
Click to collapse
Hi, I am a complete n00b at this but I have spl 3.03.0000 as well on my HD2 and I want to run android with sense - considering the FroyoStone Sense v3.2 like you have.
Before anyone completely grills me... I've done my research and downloaded everything I needed up until I came across a few posts on xda about not needing HSPL3 and radios etc if I had spl 3.03 on my phone because Android can run on spl 3.03.
I came across this post and didn't want to miss the opportunity to ask. So my question is, do I still proceed with flashing HSPL3, installing a radio, flashing a custom WinMo rom (ie. Energy's rom), format sd card and putting Android on it, then do the CLRCAD and haret to run Android?
Or (correct me if I'm wrong), can I simply format my sd card and put Android on it and do the CLRCAD and haret in order to run Android, without doing anything to my phone?
I do appologize for being long winded, it seems like we both have the same spl 3.03 and want to use FroyoStone Sense v3.2, and since you got it to work, I wanted to know how you did it.
Any help would be must appreciated,
Cheers!!
When you have SPL 3.03 on your device, don't tray to install HSPL. installing HSPL over SPL 3.03 isn't possible.
and installing a SPL 3.03 ROM over HSPL will limit your program memory to +/- 50Mb. (except on T-mous devices)
Android is compatible with latest stock ROM (SPL 3.93 / Radio 2.15)
If you have robotic voice, try to change the Kernel version.
You don't need to do something special on your device in this condition. Just format your SD card and put Android on it, and run the CLRCAD and haret in order to run Android.
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Creativus said:
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Click to expand...
Click to collapse
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Is it possible to downgrade software? For example if I'm running 1.66 now and wish to try the newest rom but find that I do not like it, could I downgrade back to 1.66?
west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
Thanks dude, I'll give it a try right now.
EDIT:
IT WORKS! BIG THANKS!
west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
What if i need to go back to the stock ROM, do i need to run stock rom again or just use the wipe all function?
Ask how to install android for a European version of HD2
I want to install android for my running HD2 ship rom 3.14.707.3,
2:15 radio contest to select the appropriate version of android to do, I heard that Android can run on hd2 (512) HSPL forward without your help, many thanks.
Same Rom other Problem
Sinds i have the 3.14 stock rom from HTC i get a the error i cannot install unsigned apps, and so i cannot run Android roms etc..
What is the easyst way to fix this.
Marc.
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Did you run the ROMUpdateUtility.exe as Administrator???
You MUST run it as Administrator or it will not work correctly.
juniogyn said:
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Click to expand...
Click to collapse
HELLO
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
flopesneves said:
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
Click to expand...
Click to collapse
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
HI
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
kurt-willems said:
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
Click to expand...
Click to collapse
flopesneves said:
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
Click to expand...
Click to collapse
Maybe a suggestion, try a other Android build.
HI
kurt-willems said:
Maybe a suggestion, try a other Android build.
Click to expand...
Click to collapse
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
flopesneves said:
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
Click to expand...
Click to collapse
the android builds on the hd2 android development subforum are all sd card builds, you can try any one of them
Can i upgrade my device to WP7?
if yes than please teach me step by step,
if i upgrade it to WP7 than can i downgrade to WM6.5?
Here is my device details:
HTC HD2 T8585
PB81100
SPL-3.03.000 xe
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
------------------
Model No: T-Mobile_LEO
Platform: PocketPC
IME: 3541XXXXXXXXXXX
S/N number: HTXXXXXXXXXX
------------------
OS ver: 5.2.21913 (21913.5.0.94)
Manila ver: 2.5.20181527.0
ROM ver: 3.14.720.3 (04666) WWE
Rom Date: 10/08/10
Radio Ver: 2.15.50.14
Protocol ver: 15.42.50.11U
------------------
CPU Qualcomm(R) 8250B
Speed: 1024 MHz
RAM Size: 448 MB
Flash Memory Size: 512MB
data bus: 32 bits
Thanks in advance
Bhupal R Raut
wp7 on hd2
bhupalraut said:
Can i upgrade my device to WP7?
if yes than please teach me step by step,
if i upgrade it to WP7 than can i downgrade to WM6.5?
Here is my device details:
HTC HD2 T8585
PB81100
SPL-3.03.000 xe
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
------------------
Model No: T-Mobile_LEO
Platform: PocketPC
IME: 3541XXXXXXXXXXX
S/N number: HTXXXXXXXXXX
------------------
OS ver: 5.2.21913 (21913.5.0.94)
Manila ver: 2.5.20181527.0
ROM ver: 3.14.720.3 (04666) WWE
Rom Date: 10/08/10
Radio Ver: 2.15.50.14
Protocol ver: 15.42.50.11U
------------------
CPU Qualcomm(R) 8250B
Speed: 1024 MHz
RAM Size: 448 MB
Flash Memory Size: 512MB
data bus: 32 bits
Thanks in advance
Bhupal R Raut
Click to expand...
Click to collapse
You would need to install hspl inorder to install wp7 on the hd2. But im not sure. Look in the Thread here for more info bout this. http://forum.xda-developers.com/showthread.php?t=912414:cool:
no progress
till this step all ok
hen enter your bootloader (hold volume down and power button while device is off)
Connect to your computer and start the RomUpdateUtility provided in the MAGLDR112 folder.
Follow the prompts and update to MAGLDR 1.12
its nothing happen
its only shows HTC on upper line n progress bar on lower line
its shows 0% on progress bar.
thanks
Bhupal R Raut
bhupalraut said:
till this step all ok
hen enter your bootloader (hold volume down and power button while device is off)
Connect to your computer and start the RomUpdateUtility provided in the MAGLDR112 folder.
Follow the prompts and update to MAGLDR 1.12
its nothing happen
its only shows HTC on upper line n progress bar on lower line
its shows 0% on progress bar.
thanks
Bhupal R Raut
Click to expand...
Click to collapse
you don't have hspl. must downgrade to 2.8
First you have to install an older StockROM, because you can not install HSPL 2.08 when you have SPL-3.03.000.
To install HSPL look here.
when i try to downgrade to RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship ver. following error
Uploaded with ImageShack.us
You need to go to HTC's website and use your phone's serial number to download an allowed ROM for your phone. It may be stock or telecom branded. As long as it isn't the 3.14 ROM.
bhupalraut said:
when i try to downgrade to RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship ver. following error
Uploaded with ImageShack.us
Click to expand...
Click to collapse
you need a GOLD CARD to flash i assume !