SOLVED!!!! I had a look at http://forum.xda-developers.com/showthread.php?p=5954764
and my phone is back to live!!
Thank you guys for your help.
Hi,
I have a GSM512 HD2 with HSPL installed.
I have been flashing fine Miri's 6.5.X ROMs on my HD2.
Today I tried to flash this ROM
RUU_Leo_SKT_KR_1.74.911.2_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Test
via MicroSD card.
(I copied the .nbh file onto my microSD card and renamed it to LEOIMG.nbh).
But while it was on the progress of flash,
the flash failed in the middle of the progress.
Then, everytime I try to turn on the phone, I'm stuck at the tricolor screen,
which says
HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Is there anything I can do?
Now the computer can't recognize the phone via USB connection, so I am not able to access the microSD card!!! I can't seem to find any way to access the card and put a shipped ROM and flash it again.
I have no microSD card reader at home..
Please help!!!
Use Custom RUU to flash HSPL again and then flash again MIri's Rom using Custom RUU
typed brick in the search bar on here..the fix is simple..
RUU_Leo_SKT_KR_1.74.911.2_Radio_15.37.50.07U_2.10. 50.08_2_Signed_LEO_Test
where did you get this?
giacominos said:
Use Custom RUU to flash HSPL again and then flash again MIri's Rom using Custom RUU
Click to expand...
Click to collapse
The problem is that the computer cannot recognize the USB connection, so Custom RUU can't work.
Anyway, I've just bought a microSD card reader and I'm downloading a shipped ROM and I'll try to see if my phone can go back to live by flashing the shipped ROM from the microSD card.
Sultan1993 said:
RUU_Leo_SKT_KR_1.74.911.2_Radio_15.37.50.07U_2.10. 50.08_2_Signed_LEO_Test
where did you get this?
Click to expand...
Click to collapse
I got the test ROM here http://www.mobileunderground.info/showthread.php?t=94&p=33884
5pteron said:
The problem is that the computer cannot recognize the USB connection, so Custom RUU can't work.
Click to expand...
Click to collapse
It's weird, are you sure of that? If you put your mobile in boot mode, connect it to your pc at the bottom ( white stripe ) does it say usb or serial? ( If It says Usb the phone is recognized don't expect to see anything on your PC) Anyway maybe you can solve with a card reader
giacominos said:
It's weird, are you sure of that? If you put your mobile in boot mode, connect it to your pc at the bottom ( white stripe ) does it say usb or serial? ( If It says Usb the phone is recognized don't expect to see anything on your PC) Anyway maybe you can solve with a card reader
Click to expand...
Click to collapse
You mean Pressing down the vol bottom and turning on the power button?
Yeah at the tricolor bootloader thing, it doesn't say that when I connect the phone to computer via USB cable.
In addition to
HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
at the bottom it will also say
'Upgrade ROM code error
please try again'
and then very fast it will go into an eternal gray screen with 'Loading...' on it.
take a look here http://forum.xda-developers.com/showthread.php?t=502167 I think that's the same issue that you're experiencing and it was solved
giacominos said:
take a look here http://forum.xda-developers.com/showthread.php?t=502167 I think that's the same issue that you're experiencing and it was solved
Click to expand...
Click to collapse
No,
The ROM has a diffrent CID from what your device is allowed to have.
You need to flash the original ROM what came with ur HD2.
Or else use a goldcard and reflash any official stock rom again.
That's it, nothing to be worried about.
Why are all the shipped ROMs out there in InstallShield exe format? When I open the exe files, the inside files (.nbh, etc.) do not show up!!!
I would really appreciate if anyone can redirect me to an URL that downloads a shipped LEO ROM that is extractable, or even better, the RUU_Signed.nbh file itself.
I'm looking at almost an end to get my phone back to live, but because of this other paltry sh*ts, I'm getting tired.
5pteron said:
Why are all the shipped ROMs out there in InstallShield exe format? When I open the exe files, the inside files (.nbh, etc.) do not show up!!!
I would really appreciate if anyone can redirect me to an URL that downloads a shipped LEO ROM that is extractable, or even better, the RUU_Signed.nbh file itself.
I'm looking at almost an end to get my phone back to live, but because of this other paltry sh*ts, I'm getting tired.
Click to expand...
Click to collapse
Right click on the exe file and select "Extract here" to unpack the files and there you will have the nbh file
ClydeB1 said:
Right click on the exe file and select "Extract here" to unpack the files and there you will have the nbh file
Click to expand...
Click to collapse
The exe file was not an extractable file as it was packed in InstallShield.
Anyway, I extracted the files using an InstallShield extractor called 'Universal Extractor.'
Here is another problem though.
After extracting the .nbh file from the shipped HTC HD2-RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2
and renaming the file to LEOIMG.nbh and copying the file to Storage card
and pressing volume down and pressing power button,
it will still load into a bootloader that won't flash, but says this below:
RUUNBH
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Upgrade ROM code error
Please try again
Serial
and to say it one more time, I can't turn on the phone but the erratic bootloader screen, and I can't connect the phone to ActiveSync or WMDC. Also I tried to Hardreset but while it says Hardreset successful, I still can't turn on the device (the phone does turn on, but goes onto that erratic bootloader screen).
And the shipped ROM I tried is a rather random one, because my phone is a debranded one that I don't know the specific ROM the phone came with.
So far thank you for your help, and I will appreciate further help.
The straightforward question from me:
What is the official shipped ROM that is flashable via SDcard on any debranded HD2 without HSPL?
5pteron said:
The straightforward question from me:
What is the official shipped ROM that is flashable via SDcard on any debranded HD2 without HSPL?
Click to expand...
Click to collapse
Try one of these - http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html. I think it is dependent on your region however and not just that the device is unbranded.
Solved!! This method worked for me!!
A bunch of thanks to hdpsytes for this.
Oh, and thank you every one, too
hdpsytes said:
1 - Download an official rom.
2 - Download HxD Hex Editor from here: http://download.cnet.com/HxD-Hex-Editor/3000-2352_4-10891068.html?tag=mncol
3 - Download the Goldcard image: (thanks Ancola66) http://forum.xda-developers.com/attachment.php?attachmentid=287634&d=1267433544
4 - Create the Goldcard:
Open HxD Hex Editor
Go to Extra tab> Open Disk. Under Physical disk, select Removable Disk (SD card), uncheck "Open as Readonly), click OK.
Go to Extra again, Open Disk Image, open up goldcard.img
Press OK when prompted for "Sector Size" 512 (Hard disks / floppy disks)
-Now, you should have two tabs, one is your removable disk, the other is goldcard.img
On goldcard.img tab. Select All> Copy.
On the "removable disk" tab. Select offset offset 00000000 till 00000170 (including the 00,000,170 line), click on Edit tab and then Paste Write.
Click on File> Save. Now you can exit the program.
5 - After that try load the official rom with the Card in. Or load by SD.
Sorry for my English
Good luck.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=5954764
Related
I bricked the phone,,,,and not it wont go past the T-mobile screen that comes when you first start it....It got bricked while i was trying to put on touchflo...i guess i ****ed up somewhere! lol .....anyways I entered it into boot mode...so i can install the RUU the USA version, after doing everything it says congrats u have intalled the blah blah blah....even after that it wont work...it keeps going back to that screen and getting stuck....Also the
IPL= 4.10.0002
SPL=4.10.0000
ANY SUGGESTIONS....lol can i even fix it or its done for good???
Thanks
Do you have a sd card installed? I thought that I bricked my device a few times and then removed the sd card and was able to reload.
just install the RUU from the bootloader... I just did it now because i bricked mine also and it worked...
Thanks
purpl3citywriter said:
just install the RUU from the bootloader... I just did it now because i bricked mine also and it worked...
Click to expand...
Click to collapse
This worked great......
you were lucky..
i bircked my phone also, but it caused a motherboard change..
my lucky was the warranty and some nice people who helped me..
so be careful..
Try a SD card flash to unbrick your device
This is how:
MAKE SURE THE HERALD IS FULLY CHARGED BEFORE STARTING THE PROCES
#01 Download your original RUU
#02 Download (if not yet installed) WinRar and install
#03 Copy your full sd micro card to your harddisk and format your card with FAT 32
#04 Rightclick the downloaded exe file with your original RUU, click Unpack here
#05 In the map the will be created you will find a file (or similar) called RUU_signed.nbh. Copy this file to your formated sd microcard.
#06 Rename the file to Heraimg.nbh
#07 Get your Herald into bootloader modus by pressing the comm manager button and the camera button and pressing the reset button at the same time. Do not release both buttons until your in bootloader.
#08 Once in bootloader pop in your sd micro card.
#09 As soon as your card is popped in the screen will say something like "Reading SD card". Wait it out till it says "Push button to start" and slide the indicated volume slider down.
#10 The Herald will start the flashing proces. Wait it out till it says "Press any button" and hit the send button.
#11 Perform a hard reset
#12 Voila! Your back in business
The download link doesnt work
Hey guys i bricked my phone as well. The links above dont work. Is there anyway anyone could email the file to me? Email is [email protected]. Thanks in Advance!
You need to download your original RUU from the europe.htc.com website and with this file follow the steps above. If downlaoding this file is for someway impossible to you search the forum for the different RUU's.
Keep in mind it depends on your version (country specifiek of not) and version (Herald, Wing, Vodafone, etc.) which RUU you need.
BTW the needed file is about 40 - 60 MB so it would be impossibel to e-mail it.
Thanks Japp i have the tmobile wing. Ive tried every link on the site. If anyone has it they can send it through yousendit.com for free.
Ok guys thanks for all your help I fanally got it done.
jappo01 said:
Try a SD card flash to unbrick your device
This is how:
MAKE SURE THE HERALD IS FULLY CHARGED BEFORE STARTING THE PROCES
#01 Download your original RUU
#02 Download (if not yet installed) WinRar and install
#03 Copy your full sd micro card to your harddisk and format your card with FAT 32
#04 Rightclick the downloaded exe file with your original RUU, click Unpack here
#05 In the map the will be created you will find a file (or similar) called RUU_signed.nbh. Copy this file to your formated sd microcard.
#06 Rename the file to Heraimg.nbh
#07 Get your Herald into bootloader modus by pressing the comm manager button and the camera button and pressing the reset button at the same time. Do not release both buttons until your in bootloader.
#08 Once in bootloader pop in your sd micro card.
#09 As soon as your card is popped in the screen will say something like "Reading SD card". Wait it out till it says "Push button to start" and slide the indicated volume slider down.
#10 The Herald will start the flashing proces. Wait it out till it says "Press any button" and hit the send button.
#11 Perform a hard reset
#12 Voila! Your back in business
Click to expand...
Click to collapse
is this flashing process also working on other devices like s710 (vox)?
NEED HELP
i have a ppc6700 and wanted to update my rom (i messed up) so i download it from here the update, and updated my rom and next it wont start up at all...its a pocket pc not a wing... now nothing would work...i already tried hard reset and it does, but then nothin happens
Woah! You can put TouchFLO on the Wing?
Thanks for the SD Removal Tip
I Installed windows live on my wing (Running JustHome Windows Mobile 6.5 Alpha v1 ) and created a conflict with other apps), I re installed card and removed windows live.. cool
Help!
I try to install another rom because my phone don't starts, so i can't use ActiveSync, but when i do it from a microsd card, i get a code in red and then it goes back to the tri-color screen.. Help me please
EDIT: Fixed..
If you can get to the Tricolour screen you should be able (in my experience) to connect to ActiveSync and install a new ROM. (note: you can't browse the contents of your phone that way.)
not working
the same problem occurd with my t-mobile shadow/htc juno
when i put file name heraimg.nbh to sd card and put it into my phone then i enterd bootloader mode it shows only three colored screen how to flash rom in this mobile plz tell me
my email id is [email protected]
shyamalso007 said:
the same problem occurd with my t-mobile shadow/htc juno
when i put file name heraimg.nbh to sd card and put it into my phone then i enterd bootloader mode it shows only three colored screen how to flash rom in this mobile plz tell me
my email id is [email protected]
Click to expand...
Click to collapse
ROM file that you use is for T - Mobile Wing / HTC Herald, and not for T-Mobile Shadow / HTC Juno
rom for your device can get in http://www.t-mobile.com/wmupgrade/
or at http://forum.xda-developers.com/forumdisplay.php?f=426
I had alrady this rom but when i put my phn in bootloader mode and install the rom it will starts and stucks at 2% and it says image file is currupted
so how do i flash it frm sd card plz tell me
shyamalso007 said:
I had alrady this rom but when i put my phn in bootloader mode and install the rom it will starts and stucks at 2% and it says image file is currupted
so how do i flash it frm sd card plz tell me
Click to expand...
Click to collapse
read post #6 to do flash via SD Card
This fix from the HD2 TMOUS_1024 section appears to allow Telstra users to finally use HSPL2.
Thanks to bgcfb - http://forum.xda-developers.com/showpost.php?p=6855002&postcount=1 and to samsamuel for pointing this out .
Although this fix is for the TMOUS device, it has been confirmed to work on a Telstra device by tvailment and using HSPL2 he was able to load 1.66.hspl - http://forum.xda-developers.com/showpost.php?p=6872412&postcount=1866
Step1: Create a text file named ModelIDCheckBypass.txt and save it to C:\
Step2: Edit the text file to contain the following entry - PB81110
Step3: Save file and set as Read Only
Step4: Run HSPL2
This has now been confirmed to work by a few more users (see below)
PS! I'm only referencing this fix here as I know many Telstra users want to be able to use HSPL2 and have not been able to. I take no responsibility for anything that may go wrong with your device as a result of bypassing the modelid check within HSPL2 - so use at your own risk.
Telstra T9193 SPL 1.66.0000
Dear ClydeB1,
I know you have been great on the Board. I did try what've been said on creating ModelIDCheckBypass.txt and so on.
When I run HSPL2_RUN, it still give me Err 0000004, Bad Model ID, etc.
Any advice?
lol actually worked haha
Thanks a million!
Confirmed this works 100% on Telstra T9193.
I tested both 1.66 and 2.08 and both work.
(Just wondering why this hasn't been posted by Bepe....it's obviously something coded into the exe to check for bypass).
the_scotsman said:
Thanks a million!
Confirmed this works 100% on Telstra T9193.
I tested both 1.66 and 2.08 and both work.
(Just wondering why this hasn't been posted by Bepe....it's obviously something coded into the exe to check for bypass).
Click to expand...
Click to collapse
Yes ... that omission has caused a lot of grief
Still, it works, so newer ModelID's can be HSPL'd and customised now
For those still unsure, the Telstra T9193 ModelID is PB81110
Thanks for the heads up, worked beautifully. I now have HSPL1.66
Thank you ClydeB1, Just flashed 1.66...worked perfectly.
using 2.08 beautifully
Thanks to all who have tried and confirmed working. Great news for all Telstra users who can now finally use HSPL2.
wyen2002 said:
Dear ClydeB1,
I know you have been great on the Board. I did try what've been said on creating ModelIDCheckBypass.txt and so on.
When I run HSPL2_RUN, it still give me Err 0000004, Bad Model ID, etc.
Any advice?
Click to expand...
Click to collapse
In bootloader, what model id do you have? It should be in the format of PB81xxxx.
Worked!
Woohooo....worked on my Telstra T9193 model....thanks mate.
works fine in my Telstra HD2 Device..
the_scotsman said:
Thanks a million!
Confirmed this works 100% on Telstra T9193.
I tested both 1.66 and 2.08 and both work.
(Just wondering why this hasn't been posted by Bepe....it's obviously something coded into the exe to check for bypass).
Click to expand...
Click to collapse
My pleasure m8, I know you've been looking for this for ages, glad it worked.
callpartha said:
Woohooo....worked on my Telstra T9193 model....thanks mate.
Click to expand...
Click to collapse
bataHD2 said:
works fine in my Telstra HD2 Device..
Click to expand...
Click to collapse
Pleasure, thanks for confirming that it works. So far there only seems to be 1 person who hasn't been successful, but lots who have been.
Telstra T9193 SPL 1.66.0000 PB 81110
My model ID: PB81110 HX-BC
SPL 1.66.000 XE
ROM date 02/23/10
Steps I took:
1 - created a txt file ModelIDCheckBypass.txt in my user document folder,
2 - move the ModelIDCheckBypass.txt to C:\,
3 - make C:\ModelIDCheckBypass.txt Read-only,
4 - run Windows Mobile Device Center in PC Windows7,
5 - showed "connected" in Windows Mobile Device Center,
6 - Right-click HSPL2_RUN in user/administrator folder, and run as Adminstrator,
7 - DF file executed, click "next",
8 - showed "waiting for USB ..." in DF window,
9 - T9193 turned into tri-color boot mode,
10 - PC Windows lost Windows Mobile Device Center after showed "disconnected",
11 - .... showed "...Error 0..04, :Bad Model ID" in DF window
thanks,
wyen2002 said:
My model ID: PB81110 HX-BC
SPL 1.66.000 XE
ROM date 02/23/10
Steps I took:
1 - created a txt file ModelIDCheckBypass.txt in my user document folder,
2 - move the ModelIDCheckBypass.txt to C:\,
3 - make C:\ModelIDCheckBypass.txt Read-only,
4 - run Windows Mobile Device Center in PC Windows7,
5 - showed "connected" in Windows Mobile Device Center,
6 - Right-click HSPL2_RUN in user/administrator folder, and run as Adminstrator,
7 - DF file executed, click "next",
8 - showed "waiting for USB ..." in DF window,
9 - T9193 turned into tri-color boot mode,
10 - PC Windows lost Windows Mobile Device Center after showed "disconnected",
11 - .... showed "...Error 0..04, :Bad Model ID" in DF window
thanks,
Click to expand...
Click to collapse
I think you are missing this step - You need to enter the following text in the ModelIDCheckBypass.txt file - PB81110.
In step 9 after turning to tri-colour bootloader screen, does USB show up in the bottom section of the screen?
Telstra T9193 SPL 1.66.0000 PB 81110
Oh, I am so sorry forgetting to write it - I did have "PB81110" in the ModelIDCheckBypass.txt file.
When the T9193 turned into the tri-color bootloader mode, it did show "USB" on the top of the fourth white color band below the RGB tri-color band.
thanks,
Sorry bud, not sure what seems to be the problem with yours. I don't have a Telstra device so I can't recheck the steps but it is strange that it works for others and with yours for some reason the ModelIDCheckBypass is not working and that's why you still get the Bad ID error.
Are you 100% sure that you have named the file correctly, have the correct modelid (ie PB81110) in the file, you have saved it to the root of your pc hard drive (ie C:\) and that you have saved the .txt file as Read Only in the file properties and you are running HSPL2 from the C: drive (right click "Run as Administrator") ? Carefully check the spelling of the file name and the modelid.
EDIT: Use this attached file, save it to C:\
Successfully upgraded to 2.08HSPL. Been waiting for age
Thanks mates.
hpacura said:
Successfully upgraded to 2.08HSPL. Been waiting for age
Thanks mates.
Click to expand...
Click to collapse
Pleasure
Dont use the 1024 HSPL2 either, just the regular HSPL2 and it will work.
I have a HTC ELF 0300 it is stucking in the tri colour screen with the following
IPL: 2.26.0002
SPL:2.28.0000
i have followed the advice i found on this forum of flashing the ROM but when i try the rom update utility it comes up with error 270 about the image also i tried the mtty process but it wont open the usb port
i tried flashing the SD Card but it then says "Invalid Certificate"
i'm a total loss and totally stuck..
any help appricated
Have you really read this sticky thread http://forum.xda-developers.com/showthread.php?t=406721 before flashing ?
Have you used "search" function with f.e. "stuck in bootloader" before posting ?
If not, please do and you'll find very useful solutions
i have read the theads over and over again and finally worked out mtty and worked out my phone is
elf0300
tmob050
it's still in tri colour mode yet i cant find a rom for it...
i tried the nbh file flashing to the memory card
but no luck....
heelllp
Do you know if you have Elf or Elfin?
It is essential for flashing original Rom Elf: http://forum.xda-developers.com/showpost.php?p=2045325&postcount=2
Elfin: http://forum.xda-developers.com/showpost.php?p=2045051&postcount=1
i haave an elf (p3450) well thats what it says on my box
i cant find the orginal rom for this and i'm totally stuck
any help is greatrully recived
also i have tried CID unlocking it so i can put custom roms on it but my computer wont active sync when the phone is connected through the USB port...
Also, what did you do to get your phone stuck in bootloader in the first place?
my brother did it to my phone before i'd even had chance to use it , and i don't know what he did.....sorry x
Try this and follow the instructions exactly http://forum.xda-developers.com/showthread.php?t=347700 and report pls
i tried this yesterday at first when i pressed enter i didnt get >cmd (which is what happening now)
then when i do get it eventually after many tries it sasys
cmd55 or something failed
and stays on 0% on a gray screen
sorry if i sound stupiud.
Ok
First you connect your device, then right click on active sync icon on your computer, chose connection settings and change according to the instructions then continue with mtty.exe
i have done this
when i press enter i dont get anything come up....
yesterday i managed to get it up though and just stayed gray screen at 0%
Try again a few times making sure you didn't overlook any detail.
I just found this http://forum.xda-developers.com/showpost.php?p=3395787&postcount=155 possibly mtty version doesn't work
2- Another possibility is unbricker rom http://forum.xda-developers.com/showthread.php?t=446242
3- gold card method (the links are dead so you should pm Dsixda)
Flash from the SD card:
ELF0IMG.nbh on a FAT32 filesystem, complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
1. Format microSD card from your computer.
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ELF0IMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted in the phone, start the bootloader (the bootloader is invoked by hold down the camera button and reset device with the stylus).
5. Confirm flashing on screen by pressing the power button (or the volume slider down).
6. Flashing might hang after some time but this is normal. Just wait.
Will try now and keep u updated
manny thanks x
Follow the instructions until you get cmd only, then return to the tutorial to continue
Good luck
Just an update
i downloaded the nbh file you sugested and tried both
1) flashing from the SD card by renaming file - when i do this is says checking sd contents then goes back to my bootlooder screen
2) running the romupdateutility.exe with the nbh file in the same folder it goes through then i get error 294 incorrect vender
i am unable to pm Dsixda about the gold card
i have no idea what else to try
ps: when running mtty i still get a gray screen then the bootloader screen.
Sorry to hear this, I'm out of ideas. Just some details not to miss:
try a hard reset
writing "ELF0IMG.nbh" (elf zero img and not elf o img)
google for mtty and download a few versions
Wait for an answer from Dsixda for gold card if you can't find your original rom
Creating your GoldCard
I don't remember well the procedure but you can try the following:
If you have access to a working pda or a working GPS device - PNA which is powered by WM (even modified) then you have to follow these steps:
Download this package and save it in your C:\ drive.
Run it.
(it will extract all the necessary files in C:\itsutilsbin (folder) and it will start the setup of Perl)
When the Perl - installation is finished run Perl Package Manager from Windows Start Menu.
Add repositories.
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml
(HowTo: run Preferences from the Perl Package Manager menu and switch to the repository tab)
After database synchronization install these packages:
Crypt-DES
XdaDevelopers-NbfUtils
(HowTo: at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon))
Format the sd card(FAT32) and insert it in a working pda.
Connect the working pda to the pc , wait to sync and run psdread.bat from C:\itsutilsbin.
Find an official rom from here with a ModelID which matches your device's one
Example: If your pda is an Elfin and you have ModelID ELF030000 then get the below rom from that thread.
RUU_Elfin_TMO_NL_2.26.114.52_4.1.13.52_03.08.90_BL UE_Ship.exe (T-MOBILE)
Device: ELF030000
CID: T-MOB003
Version: 2.26.114.3
Language: NLD
Click to expand...
Click to collapse
Extract the RUU_Signed.nbh, rename it to ELF0IMG.nbh and copy it to the sd card.
Fully charge your battery, insert the sd card to your pda, enter bootloader and flash from memory card
(Confirm flashing on screen by pressing the power button (or the volume down button)).
If everything went ok then you can use a HardSPL or a USPL to CID Unlock your phone and update the rom with one of your choice.
If you don't have a working pda use a card reader - Ubuntu (even from a LiveCD) and QMAT are required
Regards!
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
buncie2010 said:
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
Click to expand...
Click to collapse
There is a way to use a card reader instead.
Using Ubuntu LiveCD and QMAT
ps:I wonder how did the wiki entry got erased?
Dsixda and all the members who worked on this had done a great job and it's really annoying that all their work was lost.
I was updating my HTC HD2 by following the recent article in MicroMart.
I had successfully installed SPL-2.08.HSPL.
Next, instead of updating the Radio ROM, I did the MAGLDR ROMUpdate (apparently successfully) and now when I switch the phone on it just hangs with the intial HTC screen.
I cannot connect it with the PC through Active Sync.
Apart from kicking myself is there anything I can do to recover?
go to bootloader and reflash magldr
But don't I need to get connected through Active Sync through Windows Mobile Device Centre?
How do I get the HTC HD2 to do anything?
Fuzz99 said:
I was updating my HTC HD2 by following the recent article in MicroMart.
I had successfully installed SPL-2.08.HSPL.
Next, instead of updating the Radio ROM, I did the MAGLDR ROMUpdate (apparently successfully) and now when I switch the phone on it just hangs with the intial HTC screen.
I cannot connect it with the PC through Active Sync.
Apart from kicking myself is there anything I can do to recover?
Click to expand...
Click to collapse
Try to flash the latest stock ROM via SD card.It will remove the HSPL and MAGLDR.
Fuzz99 said:
But don't I need to get connected through Active Sync through Windows Mobile Device Centre?
How do I get the HTC HD2 to do anything?
Click to expand...
Click to collapse
One more example in the pile of several thousand people confused by the use of the term "get an activesync connection".
it doesn't mean the program activesync, just a USB connection.
Enter bootloader manually. Connect USB, when word "serial" becomes "USB" you can flash.
Most winmo flashing problems are caused by the time taken for the rom.exe to reboot the phone into bootloader. Putting it in bootloader manually will save you about half a minute per flash, and practically nullify any timeout connection errors.
Giraff,
Thanks for the advice, but I would be grateful if you would tell me what file to put on the SD card.
Do you mean a file like "RUU_Leo_S_Orange_UK_3.14.61.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship.exe"
which I then
- Rename to LEOIMG.nbh and copy to the root of a microSD card that's been formatted to FAT32
- Insert the storage card into your phone
- et seq?
Sam Samuel,
I've got USB on the phone, but I don't get access through Explorer.
Do I just execute the above RUU...exe file on the PC or put file
RUU_Signed_0409.nbh
on the SD card et seq.
that file, although it is an .exe file, is actually a zip.
to do an sd card flash
right click that file, and choose extract here, or perhaps unzip here, or unpack here, depending what archive program you have installed, if you cant see any options like that, install winrar or 7zip (theyre free)
It will extract to around 8 or so files, one of which, the biggest, is called RUU_signed.nbh and that is the actual rom file.
Take that file, rename it leoimg.nbh copy it to your sd card and reboot into bootloader, , teh flash should start automatically.
Or, since you have now connected to usb in bootlaoder, just double click
RUU_Leo_S_Orange_UK_3.14.61.2_Radio_15.42.50.11U_ 2 .15.50.14_LEO_S_Ship.exe
to run the flash over usb,
BUT
be aware that flashing this (or any 3.14) rom over usb whilst hspl is installed will mean it wont update the spl to 3.03.xxxx and so the rom wont work properly until you manually upgrade the spl to 3.03.xxxx using hspl4
Fuzz99 said:
but I don't get access through Explorer
Click to expand...
Click to collapse
no, you cant access teh filesystem whilst teh phone is in bootloader. This is why the update utility wont show you the 'from version' info, because it cant access the registry.
Or would I find it easier to put the file "RUU_Signed_0409.nbh" on the SD card?
I don't know what 0409 means.
0409 is the country code, not usually there, but nothing to worry about. yea you can do it sd card method if you like. it will only work if it is teh actual correct rom for teh phone, from sd card, , cant use hspl to get other stock roms on there with sd card.
If i were you tho i would have run the .exe as soon as 'serial' because 'usb' and i would know by now whether it works or not,,,, hehe.
Thanks for all the advice.
I will try again tomorrow.
samsamuel said:
One more example in the pile of several thousand people confused by the use of the term "get an activesync connection"
Click to expand...
Click to collapse
Just to add to this statement so people will better understand why Samsamuel phrased this this way. If you notice while in bootloader and the USB is present at the bottom of the screen, on your computer it is listed as HTC USB Sync.
Take the battery out and put the battery back on again. connect the usb to both phone and computer (2)hold the volume down button and press the phone power button . it will show USB Connection once it goes into magladr
Once I understood that plugging in a USB cable while in HSPL and seeing Serial change to USB on the HD2, I was able to flash the Radio ROM and proceed with the installation of Android 2.3.
All appears to be working now.
Thanks for all the advice.
My phone started having Issues ever since I installed Core Cell, I am not blaming one bit Core Cell i am just explaining, I used the windows 6.5.5 with android on my Memory card also from coredroid(none of the other sd roms would work). I got tired of windows 6.5.5 basically because my contacts from gmail would not upload to my phone in anyway possible and android coredroid did not work properly. Well now that i try to flash HSPL I am getting a fatal error, my
PB81120 SS-B3
SPL is 2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
when I run HSPL I get this message:
Critical ERROR
Flow:00000003
Error Code: 00000004
Description: Bad model ID!
when I run customRUU.exe i get this message:
ERROR [240]: File OPEN
The Update Utility can not open the requested file. please check your Update Utility.
I need help with this constant problem it is driving me insane! I do not know how to make this post one that I will if someone posts something to it, but if you could send me a message with some help also, on top of posting here that will be great!
SDcard
also when I tried to switch roms through my sd card using a LEOIMG.nbh my screen just says Loading.... and never goes to the place where I can select LEOIMG.nbh
Task 29
Also when I try to run Task 29(as administrator) the computer gets to the part where it says updating the ROM image on your PDA Phone... and my to the black screen with the letters htc in gray the percentage does not move at all neither on the computer and the phone. and then i get an error similar to when installing HSPL
eddygonzalez said:
when I run customRUU.exe i get this message:
ERROR [240]: File OPEN
The Update Utility can not open the requested file. please check your Update Utility.
Click to expand...
Click to collapse
are you running the exe as administrator? If not, try that way
yes I am running it as Administrator
When you connect to PC via USB does the word "serial" change to "USB" on the bootloader?
At what point on the process do you get this message?
I'm talking about the hspl process btw.
If you don't have the right hspl (2.08) nothing else will work.
Sent From My Fingers To Your Face.....
Here is a few suggestions for the OP.
One try changing USB ports, try all ports on your computer.
Uninstall ActiveSync/WMDC and then reinstall it, make sure you download the latest vsrsion from Microsoft.
Try deleting all of your USB drivers and letting them reinstall when you connect your HD2 to your computer.
Try another USB cable if need be.
Finally try another computer if you can.
Create a Gold-card. It will bypass CID checks and allow you to flash. Just search for the topic here on XDA. If you can't get this resolved, I can also write a custom CID to the board via JTAG for you to fix this problem.
connexion2005 i will create a gold card and see if that works Thank you very much i will let you know if it doesn't work. how hard is it to create a CID?
Gold card :_(
The Gold Card is not doing anything, every time I do Vol Down and power the tricolor screen pops up and then goes to the white screen where it says "loading...." in blue but it doesn't move from there.... what should i do in that case?
T-Macgnolia said:
Here is a few suggestions for the OP.
One try changing USB ports, try all ports on your computer.
Uninstall ActiveSync/WMDC and then reinstall it, make sure you download the latest vsrsion from Microsoft.
Try deleting all of your USB drivers and letting them reinstall when you connect your HD2 to your computer.
Try another USB cable if need be.
Finally try another computer if you can.
Click to expand...
Click to collapse
I did all of this still no luck, Is it something with my phone that is causing all this to stop working?
conantroutman said:
When you connect to PC via USB does the word "serial" change to "USB" on the bootloader?
At what point on the process do you get this message?
I'm talking about the hspl process btw.
If you don't have the right hspl (2.08) nothing else will work.
Sent From My Fingers To Your Face.....
Click to expand...
Click to collapse
so it goes to the tricolor screen and then goes to the page where it says it is loading and shows htc and the 0% bar and a few minutes later the computer shows that message and my phone stays at 0%.
So installed windows 7 in my new computer downloaded windows mobile device center 6.1 the latest version and I got a new usb cable and my phone is still having the same issues any ideas?
eddygonzalez said:
So installed windows 7 in my new computer downloaded windows mobile device center 6.1 the latest version and I got a new usb cable and my phone is still having the same issues any ideas?
Click to expand...
Click to collapse
I really hate to say it but I think you may have physical NAND problems. The NAND is where Windows Mobile or any OS that you flash to your HD2 is stored, or to help you understand it is where the ROM is flashed to when flashing a ROM. If the NAND chip has too many bad blocks it will not allow you to flash. seeimg as you have tried everything including a gold card, this is the only conclusion I can come up with. The only fix for a bad NAND chip is to replace the main board. Sorry to be the barrer of bad news.
T-Macgnolia said:
I really hate to say it but I think you may have physical NAND problems. The NAND is where Windows Mobile or any OS that you flash to your HD2 is stored, or to help you understand it is where the ROM is flashed to when flashing a ROM. If the NAND chip has too many bad blocks it will not allow you to flash. seeimg as you have tried everything including a gold card, this is the only conclusion I can come up with. The only fix for a bad NAND chip is to replace the main board. Sorry to be the barrer of bad news.
Click to expand...
Click to collapse
I guess I would just have to live with core droid windows 6.5 and android on my sd card. But do you know how to import contact from gmail to windows 6.5?
eddygonzalez said:
I guess I would just have to live with core droid windows 6.5 and android on my sd card. But do you know how to import contact from gmail to windows 6.5?
Click to expand...
Click to collapse
Look in the HD2 Android Q&A and General foum or the HD2 Windows Mobile 6.5 Q&A and General forum, I know I seen a thread on doing this in one of the two forums not too long ago. If you use search make sure to use advance search and select to only search thread titles, and if you can not find it through search than go page by page until you have went atleast 25 to 30 ages back just reading the thread titles. I am sure you can find it.