This fix from the HD2 TMOUS_1024 section appears to allow Telstra users to finally use HSPL2.
Thanks to bgcfb - http://forum.xda-developers.com/showpost.php?p=6855002&postcount=1 and to samsamuel for pointing this out .
Although this fix is for the TMOUS device, it has been confirmed to work on a Telstra device by tvailment and using HSPL2 he was able to load 1.66.hspl - http://forum.xda-developers.com/showpost.php?p=6872412&postcount=1866
Step1: Create a text file named ModelIDCheckBypass.txt and save it to C:\
Step2: Edit the text file to contain the following entry - PB81110
Step3: Save file and set as Read Only
Step4: Run HSPL2
This has now been confirmed to work by a few more users (see below)
PS! I'm only referencing this fix here as I know many Telstra users want to be able to use HSPL2 and have not been able to. I take no responsibility for anything that may go wrong with your device as a result of bypassing the modelid check within HSPL2 - so use at your own risk.
Telstra T9193 SPL 1.66.0000
Dear ClydeB1,
I know you have been great on the Board. I did try what've been said on creating ModelIDCheckBypass.txt and so on.
When I run HSPL2_RUN, it still give me Err 0000004, Bad Model ID, etc.
Any advice?
lol actually worked haha
Thanks a million!
Confirmed this works 100% on Telstra T9193.
I tested both 1.66 and 2.08 and both work.
(Just wondering why this hasn't been posted by Bepe....it's obviously something coded into the exe to check for bypass).
the_scotsman said:
Thanks a million!
Confirmed this works 100% on Telstra T9193.
I tested both 1.66 and 2.08 and both work.
(Just wondering why this hasn't been posted by Bepe....it's obviously something coded into the exe to check for bypass).
Click to expand...
Click to collapse
Yes ... that omission has caused a lot of grief
Still, it works, so newer ModelID's can be HSPL'd and customised now
For those still unsure, the Telstra T9193 ModelID is PB81110
Thanks for the heads up, worked beautifully. I now have HSPL1.66
Thank you ClydeB1, Just flashed 1.66...worked perfectly.
using 2.08 beautifully
Thanks to all who have tried and confirmed working. Great news for all Telstra users who can now finally use HSPL2.
wyen2002 said:
Dear ClydeB1,
I know you have been great on the Board. I did try what've been said on creating ModelIDCheckBypass.txt and so on.
When I run HSPL2_RUN, it still give me Err 0000004, Bad Model ID, etc.
Any advice?
Click to expand...
Click to collapse
In bootloader, what model id do you have? It should be in the format of PB81xxxx.
Worked!
Woohooo....worked on my Telstra T9193 model....thanks mate.
works fine in my Telstra HD2 Device..
the_scotsman said:
Thanks a million!
Confirmed this works 100% on Telstra T9193.
I tested both 1.66 and 2.08 and both work.
(Just wondering why this hasn't been posted by Bepe....it's obviously something coded into the exe to check for bypass).
Click to expand...
Click to collapse
My pleasure m8, I know you've been looking for this for ages, glad it worked.
callpartha said:
Woohooo....worked on my Telstra T9193 model....thanks mate.
Click to expand...
Click to collapse
bataHD2 said:
works fine in my Telstra HD2 Device..
Click to expand...
Click to collapse
Pleasure, thanks for confirming that it works. So far there only seems to be 1 person who hasn't been successful, but lots who have been.
Telstra T9193 SPL 1.66.0000 PB 81110
My model ID: PB81110 HX-BC
SPL 1.66.000 XE
ROM date 02/23/10
Steps I took:
1 - created a txt file ModelIDCheckBypass.txt in my user document folder,
2 - move the ModelIDCheckBypass.txt to C:\,
3 - make C:\ModelIDCheckBypass.txt Read-only,
4 - run Windows Mobile Device Center in PC Windows7,
5 - showed "connected" in Windows Mobile Device Center,
6 - Right-click HSPL2_RUN in user/administrator folder, and run as Adminstrator,
7 - DF file executed, click "next",
8 - showed "waiting for USB ..." in DF window,
9 - T9193 turned into tri-color boot mode,
10 - PC Windows lost Windows Mobile Device Center after showed "disconnected",
11 - .... showed "...Error 0..04, :Bad Model ID" in DF window
thanks,
wyen2002 said:
My model ID: PB81110 HX-BC
SPL 1.66.000 XE
ROM date 02/23/10
Steps I took:
1 - created a txt file ModelIDCheckBypass.txt in my user document folder,
2 - move the ModelIDCheckBypass.txt to C:\,
3 - make C:\ModelIDCheckBypass.txt Read-only,
4 - run Windows Mobile Device Center in PC Windows7,
5 - showed "connected" in Windows Mobile Device Center,
6 - Right-click HSPL2_RUN in user/administrator folder, and run as Adminstrator,
7 - DF file executed, click "next",
8 - showed "waiting for USB ..." in DF window,
9 - T9193 turned into tri-color boot mode,
10 - PC Windows lost Windows Mobile Device Center after showed "disconnected",
11 - .... showed "...Error 0..04, :Bad Model ID" in DF window
thanks,
Click to expand...
Click to collapse
I think you are missing this step - You need to enter the following text in the ModelIDCheckBypass.txt file - PB81110.
In step 9 after turning to tri-colour bootloader screen, does USB show up in the bottom section of the screen?
Telstra T9193 SPL 1.66.0000 PB 81110
Oh, I am so sorry forgetting to write it - I did have "PB81110" in the ModelIDCheckBypass.txt file.
When the T9193 turned into the tri-color bootloader mode, it did show "USB" on the top of the fourth white color band below the RGB tri-color band.
thanks,
Sorry bud, not sure what seems to be the problem with yours. I don't have a Telstra device so I can't recheck the steps but it is strange that it works for others and with yours for some reason the ModelIDCheckBypass is not working and that's why you still get the Bad ID error.
Are you 100% sure that you have named the file correctly, have the correct modelid (ie PB81110) in the file, you have saved it to the root of your pc hard drive (ie C:\) and that you have saved the .txt file as Read Only in the file properties and you are running HSPL2 from the C: drive (right click "Run as Administrator") ? Carefully check the spelling of the file name and the modelid.
EDIT: Use this attached file, save it to C:\
Successfully upgraded to 2.08HSPL. Been waiting for age
Thanks mates.
hpacura said:
Successfully upgraded to 2.08HSPL. Been waiting for age
Thanks mates.
Click to expand...
Click to collapse
Pleasure
Dont use the 1024 HSPL2 either, just the regular HSPL2 and it will work.
Related
Hi all, I'm a total noob at this but I've read every possible thread about the Tmous 1024 HD2 concerning flashing hspl2_1024 and the error code that says failed usb connection.
My problem is a bit different from the others' problems but I'll try to be as thorough as I can.
Let me start off first by listing my phone and all of its "stats"
TMOUS HTC HD2
Ram - 576MB
Flash - 1024MB (I'm guessing that this is the ROM size)
OS version - 5.2.21889
Manila Version - 2.5.20121412.1
ROM version - 2.10.531.1 (82076) WWE
Radio Version - 2.08.50.08_2
SPL - 2.08.0000
I'm at the very beginning of the process (flashing the hspl). I've read mskips tutorial backwards and forwards several times.
The first problem is that WDMC doesnt pop-up when the phone syncs with the comp. Matter fact, the green WMDC screen has never shown up on my comp., not even when I go into the start menu and click WMDC (I've tried every usb port on the comp and have visited microsofts website and downloaded and installed their WMDC a few times). All that comes up when I click WMDC is the connection settings that says Device connected.
The second problem is that when i click the next screen on the hspl2 install window, I get an error window that says something about rapi.dll not being able to be found (i get that error twice and then it seems to resume installing).
Following that, I get the usb failed connection error (a couple minutes later) and hspl2_1024 closes down. My HD2 never goes to the tri-color bootloader screen. I've tried going into the bootloader screen prior to installing hspl2_1024 but that didnt work either.
I'm completely stumped and have searched this forum for the answers to no avail. I've done a hard reset and tried again, but that didnt work. The only thing I havent tried is putting the hspl2 on my sd card and doing it from there, which from what I've read over the past few days is basically considered a no no.
I need help and all help would be greatly appreciated.
Would have pictures but the forum wont allow me to post any.
Flashing TMO HD2
Back up all data on your phone before flashing.
This is what I did and worked.
Assuming you purchased the HD2 in the US from TMOBILE.
1. Change your sync settings on your phone to use Active Sync not the usb.
2. Plug in your device to your computer. Hopefully it recognizes your phone. (If it doesn't then you might need to re-install the windows mobile device center)
3. Once connected run HSPL2_1024. Follow instructions there and should connect. Your phone should have the RGB screen. HSPL program will prompt you which version you want to install. I used 1.0 as it was the only selection
4. When completed it should say something with "HACKED"
5. Reset your phone by taking out the battery for 5 seconds.
6. Once it's powered on it should connect through Windows Mobile Device Center.
7. Now it's time to flash your custom ROM. Hopefully you have the CustomRUU.exe file together with the nbh file.
Funkyrocemz said:
The first problem is that WDMC doesnt pop-up when the phone syncs with the comp. Matter fact, the green WMDC screen has never shown up on my comp., not even when I go into the start menu and click WMDC (I've tried every usb port on the comp and have visited microsofts website and downloaded and installed their WMDC a few times). All that comes up when I click WMDC is the connection settings that says Device connected.
Click to expand...
Click to collapse
Mine never comes up either,
click start and start typing 'windows mobile .....' in teh search box and you should see it come up in the list. (round green icon)
either right click that and choose pin to start menu or drag it to the desktop as a link, then you can start it manually. You should find that once you are using it, it starts to come up on its own 'most' of the time.
never mind it seems my computer is to blame... issue solved!
SOLVED!!!! I had a look at http://forum.xda-developers.com/showthread.php?p=5954764
and my phone is back to live!!
Thank you guys for your help.
Hi,
I have a GSM512 HD2 with HSPL installed.
I have been flashing fine Miri's 6.5.X ROMs on my HD2.
Today I tried to flash this ROM
RUU_Leo_SKT_KR_1.74.911.2_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Test
via MicroSD card.
(I copied the .nbh file onto my microSD card and renamed it to LEOIMG.nbh).
But while it was on the progress of flash,
the flash failed in the middle of the progress.
Then, everytime I try to turn on the phone, I'm stuck at the tricolor screen,
which says
HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Is there anything I can do?
Now the computer can't recognize the phone via USB connection, so I am not able to access the microSD card!!! I can't seem to find any way to access the card and put a shipped ROM and flash it again.
I have no microSD card reader at home..
Please help!!!
Use Custom RUU to flash HSPL again and then flash again MIri's Rom using Custom RUU
typed brick in the search bar on here..the fix is simple..
RUU_Leo_SKT_KR_1.74.911.2_Radio_15.37.50.07U_2.10. 50.08_2_Signed_LEO_Test
where did you get this?
giacominos said:
Use Custom RUU to flash HSPL again and then flash again MIri's Rom using Custom RUU
Click to expand...
Click to collapse
The problem is that the computer cannot recognize the USB connection, so Custom RUU can't work.
Anyway, I've just bought a microSD card reader and I'm downloading a shipped ROM and I'll try to see if my phone can go back to live by flashing the shipped ROM from the microSD card.
Sultan1993 said:
RUU_Leo_SKT_KR_1.74.911.2_Radio_15.37.50.07U_2.10. 50.08_2_Signed_LEO_Test
where did you get this?
Click to expand...
Click to collapse
I got the test ROM here http://www.mobileunderground.info/showthread.php?t=94&p=33884
5pteron said:
The problem is that the computer cannot recognize the USB connection, so Custom RUU can't work.
Click to expand...
Click to collapse
It's weird, are you sure of that? If you put your mobile in boot mode, connect it to your pc at the bottom ( white stripe ) does it say usb or serial? ( If It says Usb the phone is recognized don't expect to see anything on your PC) Anyway maybe you can solve with a card reader
giacominos said:
It's weird, are you sure of that? If you put your mobile in boot mode, connect it to your pc at the bottom ( white stripe ) does it say usb or serial? ( If It says Usb the phone is recognized don't expect to see anything on your PC) Anyway maybe you can solve with a card reader
Click to expand...
Click to collapse
You mean Pressing down the vol bottom and turning on the power button?
Yeah at the tricolor bootloader thing, it doesn't say that when I connect the phone to computer via USB cable.
In addition to
HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
at the bottom it will also say
'Upgrade ROM code error
please try again'
and then very fast it will go into an eternal gray screen with 'Loading...' on it.
take a look here http://forum.xda-developers.com/showthread.php?t=502167 I think that's the same issue that you're experiencing and it was solved
giacominos said:
take a look here http://forum.xda-developers.com/showthread.php?t=502167 I think that's the same issue that you're experiencing and it was solved
Click to expand...
Click to collapse
No,
The ROM has a diffrent CID from what your device is allowed to have.
You need to flash the original ROM what came with ur HD2.
Or else use a goldcard and reflash any official stock rom again.
That's it, nothing to be worried about.
Why are all the shipped ROMs out there in InstallShield exe format? When I open the exe files, the inside files (.nbh, etc.) do not show up!!!
I would really appreciate if anyone can redirect me to an URL that downloads a shipped LEO ROM that is extractable, or even better, the RUU_Signed.nbh file itself.
I'm looking at almost an end to get my phone back to live, but because of this other paltry sh*ts, I'm getting tired.
5pteron said:
Why are all the shipped ROMs out there in InstallShield exe format? When I open the exe files, the inside files (.nbh, etc.) do not show up!!!
I would really appreciate if anyone can redirect me to an URL that downloads a shipped LEO ROM that is extractable, or even better, the RUU_Signed.nbh file itself.
I'm looking at almost an end to get my phone back to live, but because of this other paltry sh*ts, I'm getting tired.
Click to expand...
Click to collapse
Right click on the exe file and select "Extract here" to unpack the files and there you will have the nbh file
ClydeB1 said:
Right click on the exe file and select "Extract here" to unpack the files and there you will have the nbh file
Click to expand...
Click to collapse
The exe file was not an extractable file as it was packed in InstallShield.
Anyway, I extracted the files using an InstallShield extractor called 'Universal Extractor.'
Here is another problem though.
After extracting the .nbh file from the shipped HTC HD2-RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship_2
and renaming the file to LEOIMG.nbh and copying the file to Storage card
and pressing volume down and pressing power button,
it will still load into a bootloader that won't flash, but says this below:
RUUNBH
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Upgrade ROM code error
Please try again
Serial
and to say it one more time, I can't turn on the phone but the erratic bootloader screen, and I can't connect the phone to ActiveSync or WMDC. Also I tried to Hardreset but while it says Hardreset successful, I still can't turn on the device (the phone does turn on, but goes onto that erratic bootloader screen).
And the shipped ROM I tried is a rather random one, because my phone is a debranded one that I don't know the specific ROM the phone came with.
So far thank you for your help, and I will appreciate further help.
The straightforward question from me:
What is the official shipped ROM that is flashable via SDcard on any debranded HD2 without HSPL?
5pteron said:
The straightforward question from me:
What is the official shipped ROM that is flashable via SDcard on any debranded HD2 without HSPL?
Click to expand...
Click to collapse
Try one of these - http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html. I think it is dependent on your region however and not just that the device is unbranded.
Solved!! This method worked for me!!
A bunch of thanks to hdpsytes for this.
Oh, and thank you every one, too
hdpsytes said:
1 - Download an official rom.
2 - Download HxD Hex Editor from here: http://download.cnet.com/HxD-Hex-Editor/3000-2352_4-10891068.html?tag=mncol
3 - Download the Goldcard image: (thanks Ancola66) http://forum.xda-developers.com/attachment.php?attachmentid=287634&d=1267433544
4 - Create the Goldcard:
Open HxD Hex Editor
Go to Extra tab> Open Disk. Under Physical disk, select Removable Disk (SD card), uncheck "Open as Readonly), click OK.
Go to Extra again, Open Disk Image, open up goldcard.img
Press OK when prompted for "Sector Size" 512 (Hard disks / floppy disks)
-Now, you should have two tabs, one is your removable disk, the other is goldcard.img
On goldcard.img tab. Select All> Copy.
On the "removable disk" tab. Select offset offset 00000000 till 00000170 (including the 00,000,170 line), click on Edit tab and then Paste Write.
Click on File> Save. Now you can exit the program.
5 - After that try load the official rom with the Card in. Or load by SD.
Sorry for my English
Good luck.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=5954764
Hi all.
I have been reading in the forum for hours and hours, without beeing able to find an easy way (that I understand) on how to upgrade.
I am an old (retired) man, and not stupid (I hope) but have a slight consentration problem.
I want to upgrade from WM5.0 to Windows Mobile 6.1
(+Opera Mini, support for 8GB SDHC and TomTom 7)
I have: a HTC P3300 ARTE100
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
ROM version: 1.12.405.1 WWE
ROM date: 9/12/06
Radio version: 02.67.90
Protocol version: 4.1.13.28
ExtROM version: 1.12.405.101
The device is not locked (I belive) because I can use any SIM I want in the phone.
I have tried to flash to SPL 1.11.cmon, but ended up with SPL 1.11.0000
So I downloaded and installed HTC_1.12.405.01_026790_WWE_SHIP This put my phone back to original, (SPL 1.12.0000)
Synced and copied enablerapi.cab and Cert_SPCS.cab Disconnected, and ran both of them.
I tried to run start_uspl.exe, but it will only try to update from current rom ver. 1.12.405.1 to ver.9.99
And after a while I get a message on my P3300:
Unable to open log file....
tiny_console_init done
And ROM ver. is back to SPL 1.12.0000
Suggestions anyone?
ok pm me and i will walk you though.
first update to the newest version of active sync thought.
next make sure your device is fully charged.
next back up all data from your device. flashing a new rom will erase all data.
next cid unlock read the first post and download the attachments
http://forum.xda-developers.com/showthread.php?t=308242
after you have done this pm me.
as for opera just download one of the many prepacked opera cabs. here is a link to one that should work. http://forum.xda-developers.com/attachment.php?attachmentid=281464&d=1266292843
to my limited knowledge of sdhc support and the p3300 all of the cooked roms have sdhc support cooked in. so when you get a newer rom on your phone sdhc should work.
Arggggh
I can use any SIM in my phone. Is CID unlock really neccesary?
I downloaded pof's Artemis_USPL and ran it, but it seems nothing was changed.
I too wants to change the ROM ver. from 1.12.405.1 to ver. 9.99
And the link to: HTC P3300 WWE factory rom - is dead.
But I found HTC_1.12.405.01_026790_WWE_SHIP another place.
I have also found and downloaded AndreW82_WM6.1_21056_Lite_v1.4_WWE.nbh
But am afraid to try to install it since my ROM is not ver. 1.11.cmon.
Here is what I have tried so far:
Downloaded Artemis_USPL
Synced and copied enablerapi.cab and Cert_SPCS.cab
Disconnected, and ran both of them.
Booted and Synced.
Started start_uspl
(wich opened a dos window)
After 10....20.... and so on, phone softbooted.
Message on phone:
UNABLE TO OPEN LOG FILE
TINY_CONSOLE_INIT DONE
PDA Phone ROM Update Utility 3.0.3.1 stardet automatically on PC.
Checked: I understand... and clicked Next
Checked an confirmed preparation steps, and Next
New window:
Current version 1.12.405.1
Select from below UPDATE the current ROM version.
clicked on Update
Program then wants to update to version 9.99
Clicked on Next
New window:
This will take approx 10 min, - Next
Phone screen changes to red green blue, runs a bar up to 100%, and the softboots.
Takes about 10 sec, not 10 min.
Error message pops up on PC:
Error 270
Image file is corrupt.
EXIT
Disconnected anf booted phone.
SPL is still the same (SPL 1.12.0000)
___________
Trying again:
Synced
Ran EnableRapi.cab and Cert_SPSC.cab
Did not boot or disconnect, but started start_uspl.exe
10...20... and so on
70% phone-screen goes white
PDA Phone Update Utility 3.0.3.1 pops up on PC.
No reaction on phone, Hard reset.
SPL is the same (1.12.0000)
...
mini z
soft reset when the ruu window opens..
when dos window closes..
ok, now for my question..
my spl is 1.11.cmon so cid is already done and has been for a year, i have flashed several roms so i am not a noob at flashing..
the connection from my pc to artemis dsconnected during flash and now in bootloader.. it wont flash from sd..
i know how to use the mtty commands coz iv used it before, but cant remember how to get it to select USB from the 'port' menu..
*how do you get it to select usb?
i know how to use mtty but cant remember
Ai... I'm sorry man, I've never flashed an Artemis before and I don't have the tools to do it either. Maybe you should ask in #xda-dev on IRC?
...
I.m doing something wrong, but don't know what.
Phone on - connecting USB - phone syncs.
Start start_uspl.exe - at 100% screen goes white.
Softresetting - waiting for sync - then confirming on PDA Phone Update Utility.
(The uspl.zip i got from raving_nanza)
After it has finnished, phone boots - and I still have USPL ver. 1.12.0000
raving_nanza said:
ok, now for my question..
*how do you get it to select usb?
Click to expand...
Click to collapse
PC:
Active sync > File > Connection Settings > Allow USB connections, and select a port. (e.g. COM2)
Phone:
Phone > Settings > Connections > USB to PC > Enable
Then:
Phone > Programs > Active Sync > Menu > Connections > Sync PC's with this connection > Select USB.
Mini-Z said:
PC:
Active sync > File > Connection Settings > Allow USB connections, and select a port. (e.g. COM2)
Phone:
Phone > Settings > Connections > USB to PC > Enable
Then:
Phone > Programs > Active Sync > Menu > Connections > Sync PC's with this connection > Select USB.
Click to expand...
Click to collapse
cheers dude..
try this..
raving_nanza said:
try this..
ruu_signed.rar
Click to expand...
Click to collapse
Hi
Tought I should not try to install the .nbh file if USPL was not 1.11.cmon.
Btw:
One of the first steps is to take out the SD-card. Is that what I am doing wrong?
(Should I copy the AndreW82xxxx.nbh to my SD, and have it installed when I run the uspl/RUU?)
...
this is 1.11.cmon.. just try it..
...
take out sd card..
dont flash andrews rom..
do uspl with the one ive just uploaded on this thread..
raving_nanza said:
take out sd card..
dont flash andrews rom..
do uspl with the one ive just uploaded on this thread..
Click to expand...
Click to collapse
This is obviously where I miss something.
the RUU_signed is a .nbh file.
So how do I start it?
Should I use activesync and put it on the phone and some how start it from there?
Or should I put it in the same folder as the uspl cmon, and then run the uspl?
Or is there another trick that I have missed?
put it in the uspl folder and overwrite the one inside..
then do uspl..
raving_nanza said:
put it in the uspl folder and overwrite the one inside..
then do uspl..
Click to expand...
Click to collapse
"Error 270 Update error"
"The image file is corrupted. Please check uour update utility."
(I am using XP sp3.)
(But this time it at least tried to update from 1.12.0000 to 1.11.nosize)
I also tried renaming the ruu_signed to arteimg.nbh
Seems my phone has some kind of lock on the SPL 1.12.0000.
Can it be write-protected in some way?
And if so, how can I "unlock" the write protection?
I.m doing something wrong, but don't know what.
Phone on - connecting USB - phone syncs.
Start start_uspl.exe - at 100% screen goes white.
Softresetting - waiting for sync - then confirming on PDA Phone Update Utility.
(The uspl.zip i got from raving_nanza)
After it has finnished, phone boots - and I still have USPL ver. 1.12.0000
Click to expand...
Click to collapse
I've made several attempts to install 1.11.cmon, none was succesfull.
Two days ago performed another try, but this time without SR. and it worked
q123456 said:
I've made several attempts to install 1.11.cmon, none was succesfull.
Two days ago performed another try, but this time without SR. and it worked
Click to expand...
Click to collapse
Asuming SR means SoftReset - I tried, but it did not help.
Same Error (270)
So I tried again, and again.
Cert_SPCS.cab and enablerapi.cab without disconnecting nor syncing the phone.
Then start_uspl.exe, and on white screen I just started (or rather continued with) the RUU.
WOOHOO - on 3. attempt my SPL changed to 1.11.cmon
So, if you read this post, and have the same problem as I had, here is how to do it:
Download attached file, unzip it, and read the install.txt
...
1.1.cmon is 1.11.cmon
dont forget to thank POF
glad you done your spl now, which rom you gonna use, i suggest the andreW82 rom or the babbelut rom..
andreW82 +1
I glad, you did it, Mini-Z
raving_nanza said:
1.1.cmon is 1.11.cmon
dont forget to thank POF
Click to expand...
Click to collapse
1.1.cmon was the name of the zip you sent, but OK, I have changed it now.
CREDS for pof is added to install.txt
raving_nanza said:
glad you done your spl now, which rom you gonna use, i suggest the andreW82 rom or the babbelut rom..
Click to expand...
Click to collapse
I have a slight consentration problem, so I forgot that I am only half way.
I have downloaded a couple of .nbh files (AndreW82, Touch 4.02, Tom Black v5.0).
I have not yet decided wich one to use.
I want to install TomTom7 and Opera Lite + support for 8GB SDHC.
Now I just have to figure out how to install one of the .nbh files.
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
ibrahim-windeck said:
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
Click to expand...
Click to collapse
SPL 3.03 isn't compatible with HSPL sir.
But you can run Android on your Stock Rom 3.14!
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
somaking said:
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
Click to expand...
Click to collapse
Hi, I am a complete n00b at this but I have spl 3.03.0000 as well on my HD2 and I want to run android with sense - considering the FroyoStone Sense v3.2 like you have.
Before anyone completely grills me... I've done my research and downloaded everything I needed up until I came across a few posts on xda about not needing HSPL3 and radios etc if I had spl 3.03 on my phone because Android can run on spl 3.03.
I came across this post and didn't want to miss the opportunity to ask. So my question is, do I still proceed with flashing HSPL3, installing a radio, flashing a custom WinMo rom (ie. Energy's rom), format sd card and putting Android on it, then do the CLRCAD and haret to run Android?
Or (correct me if I'm wrong), can I simply format my sd card and put Android on it and do the CLRCAD and haret in order to run Android, without doing anything to my phone?
I do appologize for being long winded, it seems like we both have the same spl 3.03 and want to use FroyoStone Sense v3.2, and since you got it to work, I wanted to know how you did it.
Any help would be must appreciated,
Cheers!!
When you have SPL 3.03 on your device, don't tray to install HSPL. installing HSPL over SPL 3.03 isn't possible.
and installing a SPL 3.03 ROM over HSPL will limit your program memory to +/- 50Mb. (except on T-mous devices)
Android is compatible with latest stock ROM (SPL 3.93 / Radio 2.15)
If you have robotic voice, try to change the Kernel version.
You don't need to do something special on your device in this condition. Just format your SD card and put Android on it, and run the CLRCAD and haret in order to run Android.
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Creativus said:
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Click to expand...
Click to collapse
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Is it possible to downgrade software? For example if I'm running 1.66 now and wish to try the newest rom but find that I do not like it, could I downgrade back to 1.66?
west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
Thanks dude, I'll give it a try right now.
EDIT:
IT WORKS! BIG THANKS!
west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
What if i need to go back to the stock ROM, do i need to run stock rom again or just use the wipe all function?
Ask how to install android for a European version of HD2
I want to install android for my running HD2 ship rom 3.14.707.3,
2:15 radio contest to select the appropriate version of android to do, I heard that Android can run on hd2 (512) HSPL forward without your help, many thanks.
Same Rom other Problem
Sinds i have the 3.14 stock rom from HTC i get a the error i cannot install unsigned apps, and so i cannot run Android roms etc..
What is the easyst way to fix this.
Marc.
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Did you run the ROMUpdateUtility.exe as Administrator???
You MUST run it as Administrator or it will not work correctly.
juniogyn said:
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Click to expand...
Click to collapse
HELLO
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
flopesneves said:
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
Click to expand...
Click to collapse
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
HI
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
kurt-willems said:
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
Click to expand...
Click to collapse
flopesneves said:
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
Click to expand...
Click to collapse
Maybe a suggestion, try a other Android build.
HI
kurt-willems said:
Maybe a suggestion, try a other Android build.
Click to expand...
Click to collapse
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
flopesneves said:
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
Click to expand...
Click to collapse
the android builds on the hd2 android development subforum are all sd card builds, you can try any one of them
My phone started having Issues ever since I installed Core Cell, I am not blaming one bit Core Cell i am just explaining, I used the windows 6.5.5 with android on my Memory card also from coredroid(none of the other sd roms would work). I got tired of windows 6.5.5 basically because my contacts from gmail would not upload to my phone in anyway possible and android coredroid did not work properly. Well now that i try to flash HSPL I am getting a fatal error, my
PB81120 SS-B3
SPL is 2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
when I run HSPL I get this message:
Critical ERROR
Flow:00000003
Error Code: 00000004
Description: Bad model ID!
when I run customRUU.exe i get this message:
ERROR [240]: File OPEN
The Update Utility can not open the requested file. please check your Update Utility.
I need help with this constant problem it is driving me insane! I do not know how to make this post one that I will if someone posts something to it, but if you could send me a message with some help also, on top of posting here that will be great!
SDcard
also when I tried to switch roms through my sd card using a LEOIMG.nbh my screen just says Loading.... and never goes to the place where I can select LEOIMG.nbh
Task 29
Also when I try to run Task 29(as administrator) the computer gets to the part where it says updating the ROM image on your PDA Phone... and my to the black screen with the letters htc in gray the percentage does not move at all neither on the computer and the phone. and then i get an error similar to when installing HSPL
eddygonzalez said:
when I run customRUU.exe i get this message:
ERROR [240]: File OPEN
The Update Utility can not open the requested file. please check your Update Utility.
Click to expand...
Click to collapse
are you running the exe as administrator? If not, try that way
yes I am running it as Administrator
When you connect to PC via USB does the word "serial" change to "USB" on the bootloader?
At what point on the process do you get this message?
I'm talking about the hspl process btw.
If you don't have the right hspl (2.08) nothing else will work.
Sent From My Fingers To Your Face.....
Here is a few suggestions for the OP.
One try changing USB ports, try all ports on your computer.
Uninstall ActiveSync/WMDC and then reinstall it, make sure you download the latest vsrsion from Microsoft.
Try deleting all of your USB drivers and letting them reinstall when you connect your HD2 to your computer.
Try another USB cable if need be.
Finally try another computer if you can.
Create a Gold-card. It will bypass CID checks and allow you to flash. Just search for the topic here on XDA. If you can't get this resolved, I can also write a custom CID to the board via JTAG for you to fix this problem.
connexion2005 i will create a gold card and see if that works Thank you very much i will let you know if it doesn't work. how hard is it to create a CID?
Gold card :_(
The Gold Card is not doing anything, every time I do Vol Down and power the tricolor screen pops up and then goes to the white screen where it says "loading...." in blue but it doesn't move from there.... what should i do in that case?
T-Macgnolia said:
Here is a few suggestions for the OP.
One try changing USB ports, try all ports on your computer.
Uninstall ActiveSync/WMDC and then reinstall it, make sure you download the latest vsrsion from Microsoft.
Try deleting all of your USB drivers and letting them reinstall when you connect your HD2 to your computer.
Try another USB cable if need be.
Finally try another computer if you can.
Click to expand...
Click to collapse
I did all of this still no luck, Is it something with my phone that is causing all this to stop working?
conantroutman said:
When you connect to PC via USB does the word "serial" change to "USB" on the bootloader?
At what point on the process do you get this message?
I'm talking about the hspl process btw.
If you don't have the right hspl (2.08) nothing else will work.
Sent From My Fingers To Your Face.....
Click to expand...
Click to collapse
so it goes to the tricolor screen and then goes to the page where it says it is loading and shows htc and the 0% bar and a few minutes later the computer shows that message and my phone stays at 0%.
So installed windows 7 in my new computer downloaded windows mobile device center 6.1 the latest version and I got a new usb cable and my phone is still having the same issues any ideas?
eddygonzalez said:
So installed windows 7 in my new computer downloaded windows mobile device center 6.1 the latest version and I got a new usb cable and my phone is still having the same issues any ideas?
Click to expand...
Click to collapse
I really hate to say it but I think you may have physical NAND problems. The NAND is where Windows Mobile or any OS that you flash to your HD2 is stored, or to help you understand it is where the ROM is flashed to when flashing a ROM. If the NAND chip has too many bad blocks it will not allow you to flash. seeimg as you have tried everything including a gold card, this is the only conclusion I can come up with. The only fix for a bad NAND chip is to replace the main board. Sorry to be the barrer of bad news.
T-Macgnolia said:
I really hate to say it but I think you may have physical NAND problems. The NAND is where Windows Mobile or any OS that you flash to your HD2 is stored, or to help you understand it is where the ROM is flashed to when flashing a ROM. If the NAND chip has too many bad blocks it will not allow you to flash. seeimg as you have tried everything including a gold card, this is the only conclusion I can come up with. The only fix for a bad NAND chip is to replace the main board. Sorry to be the barrer of bad news.
Click to expand...
Click to collapse
I guess I would just have to live with core droid windows 6.5 and android on my sd card. But do you know how to import contact from gmail to windows 6.5?
eddygonzalez said:
I guess I would just have to live with core droid windows 6.5 and android on my sd card. But do you know how to import contact from gmail to windows 6.5?
Click to expand...
Click to collapse
Look in the HD2 Android Q&A and General foum or the HD2 Windows Mobile 6.5 Q&A and General forum, I know I seen a thread on doing this in one of the two forums not too long ago. If you use search make sure to use advance search and select to only search thread titles, and if you can not find it through search than go page by page until you have went atleast 25 to 30 ages back just reading the thread titles. I am sure you can find it.