Related
I bricked my P3300 but can get into red green and blue mode
what to do now please help me with all the updates i get
INVALID MODEL ID
tonsw said:
I bricked my P3300 but can get into red green and blue mode
what to do now please help me with all the updates i get
INVALID MODEL ID
Click to expand...
Click to collapse
here is same thread
http://forum.xda-developers.com/showthread.php?t=306560
tonsw said:
I bricked my P3300 but can get into red green and blue mode
what to do now please help me with all the updates i get
INVALID MODEL ID
Click to expand...
Click to collapse
Go into the bootloader mode and flash factory (stock) rom. Connect via usb cable (you do not need activesync working) a little usb will come on bottom left of screen - flash using factory (original) rom.
Hi,
while updating my ROM of HTC P3400, i have bricked it. Now when i press any button on the phone nothing happens. Only red and green light flashes once and nothing else happens. No bootloader mode (tri color). No battery charging indication nothing. Phone is compeletely dead. I have some ROM images and set of tools (mentioned on this site) available with me. Please help me recovering my cell phone. let me know some links etc or any other means of getting my cell phone back.
I am in need of desperate help.
thanks
Ashish
Dude read properly here. esp from step no.4
if u tried olip's method n ur mobile is not working.this indicates u hav new gene.proceed from step no.4 from here
i am not able to come in Boot loader mode as well. When i press cmaera key with power on key...nothing happens. Battery is also not out. i have tried my phone's battery successfully in frn'z cell.
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Thanks a ton man...
i have flashed new rom and it works absolutely fine.
htc gene bricked
guys I have the same problem. My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. I am even not getting the tri color screen.please help me.
Not bootloader mode
i pressed camera button+power buttton but nothing happen
plz help me what i do????//
how can i get now booltloader mode
I have the same problem when i enter to bootloader the usb appears on the bottom of screen but i can"t execute the ""mitty.exe""".there is no usb button...
I also stop the webcomm.exe from task manager ;;;; pls hellp meeeeeeeeeee,,,,,
pressed camera button+power buttton but nothing happen
Click to expand...
Click to collapse
Hold the camera button and press the reset button. Read what ramersonw has said.
I also stop the webcomm.exe from task manager
Click to expand...
Click to collapse
Right click on the Activesync icon and deactivate USB Connection. Wait for the device to be recognized, if it is not being recoginized, change the cable.
ALso BRICKED
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
You can install any ROM you feel like, the choice is yours - just make sure that it says that it is for "New Gene"
PPL, I've tried all of it.. hold the camera key and reset/power on etc but my p3400 denies to boot. only answer n disconnect key blinks while trying to reset.
while trying to press the power on key nothing happens,,, no led blinks at all....
pls help...
ramersonw said:
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Click to expand...
Click to collapse
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
my HTC still well not run
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.10.Olip
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
---------- Post added at 01:40 AM ---------- Previous post was at 01:34 AM ----------
[email protected] said:
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
Click to expand...
Click to collapse
The same
my HTC still well not run
I have tri colours
ONBL 1.07.0000
SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help
Thanks
HCT p3400i is dead pls help
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
jamshed said:
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
Click to expand...
Click to collapse
try to flash rom your device ! here tutorial to do it --> http://forum.xda-developers.com/showthread.php?t=472169
Hi all.
I tryed to upgrade my 6815 to WM6.5. During the flash process it got stucked in the midle. The screen got all black and it does not do anything. I think the bootloader is dead.
I tryed to charge it. The red light is working, so it's charging. But the phone is dead.
Can anyone help me?
Thanks
PS: Sorry if this thread has been posted before. I search a while in the forum and didn't find any that could help me with my problem...
if it is charging and u have orange light pull up batery for half an hour, hold the soft 1 and soft 2 buttons and insert batery holding them. don,t leg go of the buttons... see what happends. it should go in bl an the flash a custom ron or smth. if bl is dead go here
Hi.
Thanks for your reply.
The light is not orange, ir red when I plug it to power..
I will try the first option you give me.. the second one is not for me, I'm not so advanced.. heheh
My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.
pravin.kamdi said:
My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.
Click to expand...
Click to collapse
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .
deepv84 said:
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .
Click to expand...
Click to collapse
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button
pravin.kamdi said:
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button
Click to expand...
Click to collapse
remove battery and then hold power button for 20 seconds (this will remove stored power from device )
then insert battery
press and hold camera button then press power to bootloader
hope this will work
Pravin,
What happened??
Did it work?
no bro i have tried power cycling also nothing is working.
ok dude did it worked?
if not tell me i'll help you via team vewer to unbrick it
dont worry just dont panic i've unbricked mine too
what happen
hey bro ,,
what happen, r u able u restore u r set...... if not tell us ...
bye
My Gene also dead
Please help me,,
i try to update rom but it fail,
now when i start my gene it show color screen...
please help me what i do
my yahoo chat id [email protected]
added you on yahoo
hey amit ,,
can u explain more in detail what u do exactly with u r handset..
.......
When i try to update my rom, i don`t know what happan but now, my phone not start when i try to start only blue and red light flash. nothing.
when i press reset with camera button i saw three color screen.
Tell me what i do..............
hello gurusingh,
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
hi gurusinghbrar,
My Htc p3400, can not start......
i was updating this rom "RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship" after 100% complete it turns off , but not start only Green and red light flash during press reset button...
i was try all methods,#remove batery 20 sec and then start with camer button & both camera and voice button. but result is same...
#No indication during Charging.,no usb detected in PC.
please help how i can recover my device.....
sanmukh singh
[email protected]
HTC P3400i GENE100 Dead
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali
prgawali said:
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali
Click to expand...
Click to collapse
check ur mail
Gene back to life
Thanks to Sumeet...
I got my HTC P-3400i New Gene back to life. It works better too. Sumeet is the man, who has given life to my entirely dead gene. I thank to him and suggest needy to contact him in their cases.
Thanks to XDA-developers Forum too...
Regards
Parag Gawali
same problem i had pls help me
Fido/Sumeet, please help me my gene got bricked when i was downgrading my gene from 6.1 to stock rom. after successful rom update my gene doesnt got restarted i'm getting black blank screen.
pleaseeeeeeeeeeee guys help me.....
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
TheFr1tZ said:
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
Click to expand...
Click to collapse
Reflash another SBF... did you try flashing an éclair sbf by mistake?
What was your BL?
Try one of the BL5 froyo sbfs... Nordic seems to be rather popular... check the BL version before you flash, try out BL 5, but I'd suggest you think twice and ask for more help before flashing a BL6 sbf.
krushnam said:
Reflash another SBF... did you try flashing an éclair sbf by mistake?
What was your BL?
Try one of the BL5 froyo sbfs... Nordic seems to be rather popular... check the BL version before you flash, try out BL 5, but I'd suggest you think twice and ask for more help before flashing a BL6 sbf.
Click to expand...
Click to collapse
The problem is when i conect it to the pc it doesent turn on , and the RSD Lite doesent see it ( and i dont know another way to reflash it (
And the BL is 9.10
TheFr1tZ said:
The problem is when i conect it to the pc it doesent turn on , and the RSD Lite doesent see it ( and i dont know another way to reflash it (
And the BL is 9.10
Click to expand...
Click to collapse
Ya BL is 9.10 for all, bit there's (sub) versions of it like CG4 ,CG5 CG6 & CG7. So most people just say BL6 BL7 etc. That's what I meant.
CG Version 2: SBF 2.21 / 2.34 /
Chinese (Éclair) (Defy)
CG Version 3: SBF 2.51 (Éclair) (Defy)
CG Version 4: SBF 3.4.2 (Froyo) (Defy)
CG Version 5: SBF 4.5.0 / 4.5.1
(Gingerbread) (Defy)
CG Version 6: SBF 4.5.1 (Gingerbread,
2.3.6, (Red lens Defy/Defy+) )
CG Version 7: SBF 4.5.1 (Latests
Gingerbreads, 2.3.6, (Red lens Defy/
Defy+) )
If you try to flash a lower ID version
than the one already on your phone, you
will just get a Black screen after booting
or a screen telling you to flash an
official rom.
So, with this in mind, you can now hop
between Android versions without
screwing up your phone.
This thread explains everything: http://forum.xda-developers.com/showthread.php?t=1216982
Use an external charger or another phone to fully charge your battery and then plug it in and RSDLite will detect it.
My Defy is not turnng on
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Same situation
jayanth1255 said:
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Click to expand...
Click to collapse
HI there Jayant ... i am in a situation like yours ....
my defy will not turn on ... battery is ok ... i have 2 batteries and its not turning on at all ... no led lights up .. no screen is on ...
wanted to know how did you managed to sort out your problem
please help me if you can
Hi, I am in a similar situation that my defy wont boot up (no screen activity) after I flashed the official Froyo ( Ver 4). The problem is that i bought it second hand and some miui rom (gingerbread) was installed in it with second init active with prerooted. I wanted official Froyo, dont know what was the highest version installed in it. Later tried to install the Nordic Froyo SBF, it didn't help either.
I have another defy on the same miui built (which is working normally and used for charging the dead defys battery), dont know what to do with the soft-bricked one. Which sbf to flash to make it work again.
jayanth1255 said:
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Click to expand...
Click to collapse
exactly the same situation here. Someone pls come up with a solution I don't want to believe that the phone is now useless by a software problem there must be a solution
Have you tried charging through external battery charger or the mcgyver method?
Sent from my Nexus 7 using Tapatalk
Flashing a bl6 sbf helped out. The sbf I used was dfp-125. Made my defy into defy plus though and only after that it booted. Can root and install secondinit on it for further flashing. Once you get to the red motor logo after flashing, you might have to wipe data cache from stock recovery.
Hope this helps.
Sent from my MB525 using xda app-developers app
Charging problem
TheFr1tZ said:
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
Click to expand...
Click to collapse
Make a downgrade on defy results: Brick your device!
1st attempt: Plug in the PC and wait a green led (means your battery it´s above 80% charged)... Be patient!!!
2nd attempt: You must to have/do one "factory cable"(searchable in CM´s foruns) to charge the battery. To be recognized by the RSD Lite you need to keep the "factory cable" to do a downgrade.
A link that helps: http://forum.xda-developers.com/showthread.php?t=2500789
ibtihaaz said:
HI there Jayant ... i am in a situation like yours ....
my defy will not turn on ... battery is ok ... i have 2 batteries and its not turning on at all ... no led lights up .. no screen is on ...
wanted to know how did you managed to sort out your problem
please help me if you can
Click to expand...
Click to collapse
Same situation...
No solution found?