Database Users

Cant get into fastboot gt540

Please help
I have gone from 1.6 to 2.1 using the KDZ Updater and the europe open + fastboot.
It is installed because when i go into about phone it shows 2.1
However whenever i try to go into fastboot by holding the camera and power on I get a small vibrate as the phone pwrs up and then nothing , I know the screen should go black but ther is no lg logo before that. When i plug into PC and open a cmd the phone is not found and also the whole phone is not responsive and the only way to be able to do anything is to pull the battery and reboot.
Can anyone please help me It is starting to get me pi%%ed, i have followed al the instructions and just cant get it
Thamks

have you tried reflashing with another fastbot rom??

I have tried the carphone warehouse and the european one but that is all not sure what other ones there are.
I have just done a factory reset so as to start again but I dont fancy my chances.
It is my wifes phone so I ned to get it going again

try this
h**p://www.mediafire.com/?h56av4cb8l6nz16
change * to t
got the link from
h**p://forum.xda-developers.com/showthread.php?t=1041669

Dwnlding now will give it a try Thanks heaps
this is the worlds slowest dwnld

Bummer man no good , if i hold dwn the camera button for a long time it then just boots all the way up. i just cant get it to go to fastboot which means i have a half flashed phone,
really stuck now

woa woa woa this is bad sry for late reply had to eat dinner anyway il call the experts dont worry

no problem hope dinner was good Lol. looking fwd to what the experts I have to say

Hi mate are you able get the LG logos during a normal boot?

no there are no logos during the normal boot , I have tried to do the frech kdz file followed by the out file but that has not worked, also if i try to hold volume up or dwn or camera during boot it does nothing so i have to remove the battery and put it in again to get it to boot

hi people sry i cant help im only 13 ~.~

thats cool thnx
i am sure other will help out

try vol down and power and try the fastboot devices command
Sent from my GT540 using XDA Premium App

Can you explain the fastboot devices command a bit further please. I get no response from phone when I try the button combinations
sent from My Delorian

ok first boot your phone into fastboot by pressing the power and camera if your phone is doing what i think it is doing it should look like it hasnt booted e.g. black screen then plug your phone into your usb and use command prompt or terminal if your on ubuntu and navigate to your folder that has the adb.exe and fastboot.exe
e.g. mine is
cd C:\Documents and Settings\Administrator\My Documents\Downloads\adb+fastboot\adb+fastboot
them type
fastboot devices into command prompt that will tell you if your phone has connected into fastboot mode

http://androidforums.com/optimus-gt...2-cyanogenmod-6-1-android-2-2-here-gt540.html
I have been following this tutorial and have just typed in fastboot.exe -w and it is now saying erasing user data, in the flashing cynogen mod section, it has been going for a while i am not sure how long it should take
when i typed fastboot devices it came back with ? fastboot and nothing else

when you get the ? mark your phone is connected and you are good to go at flashing fastboot roms.
Sent from my GT540 using XDA Premium App

really! thanks so much this has been doing my head in for some time (3 late nights to be exact)
Hopefully things will go good from here
Thanks again I will click the thanks button as well

Hope it goes well cus it's ur wife's phone my sis will never let me mod her gt540 and if u Are going to use cm7 by mur4ik I suggest u using m6 instead of the latest rc0 as the wifi got abit of a problem

Link to the cm7 thread just in case u don't know
h**p://forum.xda-developers.com/showthread.php?t=927379

[Q] [q] heelp mee pleaase !!

heei guys .
half a year before I bought the zte blade, and so far it worked well.
but suddenly it stops working ..
whenever I try my cell phone goes immediately to start the red "back" button on (bright red) and then there's the green robot android, then the blue zte intro and then it all over again ..
I have not changed my zte (clockwork, rom)
I know myself well not so good ..
would be really nice if someone could help me ..
I do not know what to do ..!!!
or is it maybe bricked ?!
thanks ..

Its not bricked as it still boots up.
When exactly does the phone crash - when you make a call, start an app, or just automatically reboots?
Did you install a new app just before this started happening?
Is the phone rooted?
Are you sure the battery is ok? Try starting phone with charger plugged in.

ouh ..
yes when i switch the phone on the android boot logo cames then the (blue) zte intro .. and then the zte intro comes again and again ...
noo ..
aahm ? i dont do anything with the pc and the zte ..
so i think i dont root it or something ..
one time there was "ftm" on the screen (after it had this problem).. but i didnt know what this is ..
thank you in front off !!!

but i didnt came anymore to the homescreen , or lock screen

Try booting into recovery and clear the cache? I remember my old G1 did the same thing, and after clearing the system cache it worked.
To boot into recovery i think you keep hold of volume down when turning the device on.
If that doesn't work you could wipe the device, but you'll loose everything on it then.
Sent from my ZTE BLADE using XDA App

The issue you have is this, the rom that has been flashed to the phone is for Gen 2, but the phone is still set on Gen 1.
You'll need to boot into recovery and perform a restore, or flash Ginger stir Fry Rom, then the phone will work.
sent using tapatalk

Solutions depend on
-- whether or not u have custom recovery installed ,
-- whether or not fastboot is enabled in your device. (It isn't enabled only in stock gen2 firmware)
-- whether or not u have rooted and made changes to system partition.
Possible solutions
-- If u have custom recovery installed then format (= wipe data/factory reset) the device from the recovery.
Power off the device. Then by holding volume down power on the device. This takes u into custom recovery menu if it is installed. If custom recovery isn't installed this takes you to FTM MODE.
-- If u have fastboot enabled then use this method to format ur device. Power off the device. Then hold volume up and power on the device. Here the device should stay at green android logo forever if fastboot is enabled. This is fastboot mode. Now install zte USB drivers in PC and connect phone in fastboot mode to PC. It will install the software. Now in device manager u shouldn't see any android named devices with yellow unrecognised format. Then use fastboot windows tools from command prompt. The command to format tthe device is
fastboot erase userdata
-- if the above processes didn't work then using tpt is recommended way. U can flash complete low level device firmware using tpt. U can flash either a recovery alone to hard reset. Or u can flash a complete rom. On bit searching at modaco u will get more information regarding everything.
Sent from my Blade using XDA App

THANK YOU !!
but i dont understand that things .. ?!
can you explain me your answer for people do not understand much of it ?

Download gen1 to gen2 (there is a download link in this section) http://forum.xda-developers.com/showthread.php?t=1258855
Unzip the file and place the image ( the image is called image, not gen1 to gen2) on the root of your sd card (ideally it is best to do this on a pc)
Also download and place the Rom you wish to use on the root of your SD card (cyanogenMod 7.1.0 stable release works well) http://forum.xda-developers.com/showthread.php?t=1297776
DO NOT UNZIP THE ROM at this stage.
Put the SD card back into the phone.
Power off the phone, hold menu & vol + (up) & power at the same time, you should see some green writing, wait until it is finished (well done your phone is now gen2)
You should now arrive at the clockwork recovery screen, if not power off the phone, then hold vol - (down) and power (together), clockwork will boot.
Now using clockwork recovery, clear data/factory reset, then install your rom from the zip, that is all there is to it, obviously you'll have to enter your login details to use the market and sync your contacts etc, but your phone should now be working.
Don't forget to make a nandroid backup.
Goodluck
sent using tapatalk

THANK YOU VERY VERY VERY MUUCHH !!!!
it works perfect !!!!!!!
thanks ((((

You are very welcome
sent using tapatalk

Problem in boot of my Huawei ideos x5 Pro

I have an ideos x5 pro, I wipe boot and my smartphone wouldn't startup. :crying:
can you help me please?

Sahsinho said:
I have an ideos x5 pro, I wipe boot and my smartphone wouldn't startup. :crying:
can you help me please?
Click to expand...
Click to collapse
just put back boot in pink screen

but I don't have a pink screen or anything, and pc don't detect it

Flash step 2 of the official rom you had before!!

pikachukaki said:
Flash step 2 of the official rom you had before!!
Click to expand...
Click to collapse
I find the original rom (froyo 2.2) but what do you mean by flash step 2 (sorry but i'm beginner)

Sahsinho said:
I can't find the original rom (froyo 2.2) and what do you mean by flash step 2 (sorry but i'm beginner)
Click to expand...
Click to collapse
Download the froyo image folder from here: http://www.mediafire.com/?b3qkwulqemswxfq (thanks to gkalenis).
Then power off your phone, pull of the battery, insert it again and press volume up, volume down and power button at the same time until you see a pink screen on your phone. Connect it to pc.
Now your pc recognises a new drive with a folder named image.
You have to replace this folder with the one you downloaded before.
Unplug usb, pull off the battery, insert it again and power up your device.
Sent from my U8800pro using Tapatalk 2

TUPAC_RIP said:
Download the froyo image folder from here: http://www.mediafire.com/?b3qkwulqemswxfq (thanks to gkalenis).
Then power off your phone connect it to pc and press volume up, volume down and power button at the same time until you see a pink screen on your phone.
Now your pc recognises a new drive with a folder named image.
You have to replace this folder with the one you downloaded defore.
Unplug usb, pull off the battery and insert it again and power up your device.
Sent from my U8800pro using Tapatalk 2
Click to expand...
Click to collapse
thank you very much, but like I tell before, the pc can't detect the phone, and when pushing power and any other button nothing change :/

Sahsinho said:
thank you very much, but like I tell before, the pc can't detect the phone, and when pushing power and any other button nothing change :/
Click to expand...
Click to collapse
First press vol+,vol- and power button and then connect your device to pc.
What do you mean ''nothing changes''? What do you see when you press all three buttons together?
Install drivers to your pc so it can detect your device.
Sent from my U8800pro using Tapatalk 2

TUPAC_RIP said:
First press vol+,vol- and power button and then connect your device to pc.
What do you mean ''nothing changes''? What do you see when you press all three buttons together?
Install drivers to your pc so it can detect your device.
Sent from my U8800pro using Tapatalk 2
Click to expand...
Click to collapse
I mean that the phone don't startup, it can't find anything to boot with

Sahsinho said:
I have an ideos x5 pro, I wipe boot and my smartphone wouldn't startup. :crying:
can you help me please?
Click to expand...
Click to collapse
Sahsinho said:
I find the original rom (froyo 2.2) but what do you mean by flash step 2 (sorry but i'm beginner)
Click to expand...
Click to collapse
How did you wipe boot????
Explain please, what did you done.
What rom you had before? ??
Ofiicial froyo 2.2 or what? ??
Sent from my U8800Pro using xda premium

gkalenis said:
How did you wipe boot????
Explain please, what did you done.
What rom you had before? ??
Ofiicial froyo 2.2 or what? ??
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
ok
I had the official rom froyo 2.2.2, I download an official rom (2.3) from the official website, but I can't updating my phone because it stopped in the half of the progress bar with a failed error, I tried many time but the same error, so I search in google and I find that I have to wipe data, wipe system, wipe cash and to wipe boot, and then I restart the operation of updating, but it stop in the same position with the same error, and after that the phone wouldn't startup and it don't respond to any command (power+ volume up and/or down ...) and the pc can't detect it.
I think that the problem is the boot but I can't fix it

Sahsinho said:
ok
I had the official rom froyo 2.2.2, I download an official rom (2.3) from the official website, but I can't updating my phone because it stopped in the half of the progress bar with a failed error, I tried many time but the same error, so I search in google and I find that I have to wipe data, wipe system, wipe cash and to wipe boot, and then I restart the operation of updating, but it stop in the same position with the same error, and after that the phone wouldn't startup and it don't respond to any command (power+ volume up and/or down ...) and the pc can't detect it.
I think that the problem is the boot but I can't fix it
Click to expand...
Click to collapse
Once it happend to me. If it is not booting and there is no huawei logo, you have to change the motherboard. If there is Huawei logo you are luckey enough, do the update without battery. A bad flash vanish my huawei logo. I approch the serivec center, and the motherboard has been replaced. So check once if there is huawei logo on screen and do the same update with dload folder without attery

Sahsinho said:
ok
I had the official rom froyo 2.2.2, I download an official rom (2.3) from the official website, but I can't updating my phone because it stopped in the half of the progress bar with a failed error, I tried many time but the same error, so I search in google and I find that I have to wipe data, wipe system, wipe cash and to wipe boot, and then I restart the operation of updating, but it stop in the same position with the same error, and after that the phone wouldn't startup and it don't respond to any command (power+ volume up and/or down ...) and the pc can't detect it.
I think that the problem is the boot but I can't fix it
Click to expand...
Click to collapse
Ok, that's good explanation.
You brick your phone.
As you cannot see huawei's flower or anything then you brick it.
Go to service , you don't have any other option right now.
And please after you get back your phone, DO NOT DO ANYTHING, before ask first.
You follow a completely wrong procedure, so when you get your phone back from service, everyone in this forum can help you on anything you want to do, but now you cannot do anything, sorry ...
Sent from my U8800Pro using xda premium

what about a Jtag or pinout or something like that ??? do you have an idea ???

Sahsinho said:
what about a Jtag or pinout or something like that ??? do you have an idea ???
Click to expand...
Click to collapse
I'm sorry, you don't have other solution, except service.
Sent from my U8800Pro using xda premium

Jtag officially supports our phone though..if u have knowledge you can do it but if u dont..u will destroy it more
-Rik[Rittik]

Alternative: check if can be recognize it via USB in Linux environment.(Linux doesn't need any appropriate drivers)
Sent from my U8800pro using xda app-developers app

[Q] update installation stuck

hello
my friend has galaxy y duos gt-s6102
he received and update,during installation its stuck on 46%.if he power off and turn on again the device will directly enter the installation and stuck again,I could not enter to the download mood so I can flash the android via odin,if i touch any key the device will continue to that step again
any one can help brothers?
thanks

ahmadtrabulsi said:
hello
my friend has galaxy y duos gt-s6102
he received and update,during installation its stuck on 46%.if he power off and turn on again the device will directly enter the installation and stuck again,I could not enter to the download mood so I can flash the android via odin,if i touch any key the device will continue to that step again
any one can help brothers?
thanks
Click to expand...
Click to collapse
If you can enter into recovery,try wiping data and cache.
Sent from my GT-S5360 using xda premium

Thank you but I also tried recovery.it it not able to enter any mode

no replays ??
is this mean scrap the phone?

If it was an update.. Then i am sure ur phone is in warrenty.. Or shud be fixed by service centre for free... U can just ask them.. If they ask money.. Then u can flash stock rom via odin..
** rooting is new for me,
nd i am a noob to root....**

I don't care about the money or the service,I wanna care about myself and the forum here,didn't I been clear with my explanation? I explain that I can not enter the download mode or recovery mode so how can I flash using the odin or recovery factory reset as well
what I want to know is CAN I FLASH A ROM OR DO SOMETHING WITH THE PHONE THAT NOT ABLE TO CHANT THE STATUS OF INSTALLING UPDATE? IT IS STUCK ON THIS ,IF BATTERY REMOVED AND INSERT AGAIN THEN TOUCH ANY KEY IT WILL COME BACK TO THE INSTALLING

ahmadtrabulsi said:
I don't care about the money or the service,I wanna care about myself and the forum here,didn't I been clear with my explanation? I explain that I can not enter the download mode or recovery mode so how can I flash using the odin or recovery factory reset as well
what I want to know is CAN I FLASH A ROM OR DO SOMETHING WITH THE PHONE THAT NOT ABLE TO CHANT THE STATUS OF INSTALLING UPDATE? IT IS STUCK ON THIS ,IF BATTERY REMOVED AND INSERT AGAIN THEN TOUCH ANY KEY IT WILL COME BACK TO THE INSTALLING
Click to expand...
Click to collapse
Bro i was also suffering from the same problem......installing process was getting stuck at 86%, removed battery then i put it back and started it then ot started getting stuck on 46% no matter how many times i did the same thing.......then i searched online and found 1 post on yahoo and it worked :laugh: it really simple, you just have to plug the charger in and surprising it completed the update process after a while ! cheers mate :good:

[Q] My alcatel pop c3 was stuck in boot logo

I rooted my phone and it was successful then i used "eris market fix" then it says i need to restart and then my phone was stuck into boot logo sorry for bad english

iamjustincute said:
I rooted my phone and it was successful then i used "eris market fix" then it says i need to restart and then my phone was stuck into boot logo sorry for bad english
Click to expand...
Click to collapse
How can i make my phone work again need help pleeaaase ((((

U need to go into recovery mode by powering off your phone then keep your fingers on volume up and power. Power botton should be the last key. (Even when the phone turn on dont release the botton until u go into a black screen with som writing) when u are in recover mode use volume up snd down keys to navigate to factory reset then use power key to select it then scroll down to yes then use power to select it then wait until everything is over then reboot the phone.
Sent from my ONE TOUCH 4033A using XDA Free mobile app

Help! Formatted my bootloader
Please Help!... i have a Dl700, pop c3 4033A i'm in jamaica and i got it from digicel. i managed to root the phone but bricked it after. i found a stock rom ans tried to flash it with the flash tool and i keep getting BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail i found a forum that said i should format with the flash tool and try again but i did a whole flash and deleted my bootloader. now its just black screen and the computer only recognizes it without its batteries and as a mtk device which keeps disconnecting and reconnecting. plz help its the only phone i have i was just too curious i guess

same problem here