Database Users

[Q] Bricked my phone. Need help!

Hello guys. Today I got my new Huawei U8800 Pro from China. Then I downloaded a new firmware from the Huawei site. Prepared the SD card, put it in the device and turned it on with +\- vol buttons. Device had started and update process too. There were Unpacking, Updating (or smth) and Installing. After that screen turned off and I suggested that I should pull out the battery. .... After that when I push turn on button device vibrates and nothing more happen ... I think I've bricked it... (( Tell me please how I can unbrick it to install firmware properly. I've waited for this phone too much and then ... bam .. i made a mistake.. Help me please.

Take the USB cable out and push VOL+, VOL- and Power. What happens then?
If nothing, try pushing VOL+ and Power. Tell me if that gets you into Recovery...

dexxxterito said:
Hello guys. Today I got my new Huawei U8800 Pro from China. Then I downloaded a new firmware from the Huawei site. Prepared the SD card, put it in the device and turned it on with +\- vol buttons. Device had started and update process too. There were Unpacking, Updating (or smth) and Installing. After that screen turned off and I suggested that I should pull out the battery. .... After that when I push turn on button device vibrates and nothing more happen ... I think I've bricked it... (( Tell me please how I can unbrick it to install firmware properly. I've waited for this phone too much and then ... bam .. i made a mistake.. Help me please.
Click to expand...
Click to collapse
Can IT be that you downloaded a u8800 Firmware?
Sent from my Huawei u8800 using XDA App

katu2006 said:
Take the USB cable out and push VOL+, VOL- and Power. What happens then?
If nothing, try pushing VOL+ and Power. Tell me if that gets you into Recovery...
Click to expand...
Click to collapse
When I take the cable out and turn on my phone with pushed VOL+ and VOL- device vibrates 1 time and then nothing don't happen. Display don't turn on.

levibuko said:
Can IT be that you downloaded a u8800 Firmware?
Sent from my Huawei u8800 using XDA App
Click to expand...
Click to collapse
No, I downloaded the firmware from U8800 Pro software list. Can't post the link

Please, tell me any suggestions how can I turn it back on

dexxxterito said:
No, I downloaded the firmware from U8800 Pro software list. Can't post the link
Click to expand...
Click to collapse
looks like huawei post wrong rom in u8800pro software section
stock rom (Lithuania tele2) call U8800PV100R001C00B026
and huawei posted call U8800V100R001C00B138SP04

If that's the case, send it back to warranty. They have the obligation to cover this for you, as it's Huawei's fault.

This is one of the reason huawei tries tp block us from downloading firmware images :/

yeah, but still, this happen to 1% of the users...Were is the logic? Give up on updates, just because 1% of the phones may come back?

katu2006 said:
yeah, but still, this happen to 1% of the users...Were is the logic? Give up on updates, just because 1% of the phones may come back?
Click to expand...
Click to collapse
Didnt say it was right but the updater really should have an installscript that checks if its u8800 or u8800 pro (or msm7xxx vs msm8xxx)

unable to install clockworkmod

Hi to everyone.
I have an Ideos x5 u8800, and i have the official 2.3.5 b522 gingerbread update.
I have already rooted my phone without any kind of problems, but i cannot install the clockworkmod recovery by any method that i ve seen in here and over the internet.
The problem that i am having with this is that i follow the procedures shown on this site.
1) i download the recovery img
2) i unzip it
3) i power off the device, and turn it on using volume+ plus volume- plus power buttons all long pressed together until pink screen appears
but after pink screen, i connect the phone to computer via usb, but computer wont recognize the phone. i mean i cannot access the phone from my pc during the pink screen to paste the recovery image on the phone.
I have install Hi Siute lattes version, i have use it do check for drivers, and it says that is ok. I have also went to the device manager and it says all my drivers are up to date.
i am using windows 7 64 bit, i don t know if have some kind of conflict. I know that i am probably doing something wrong, but don t know what, so if you very kindly can help me i would be eternal grateful, and if cannot help me i thank you anyway.

http://forum.xda-developers.com/showthread.php?t=1457490
Sent from my GT-P1000 using Tapatalk 2

[PATCH] Get back your PINK screen! (wont work)
Qqqxxxzzz said:
http://forum.xda-developers.com/showthread.php?t=1457490
Sent from my GT-P1000 using Tapatalk 2
Click to expand...
Click to collapse
I thank you for the help Qqqxxxzzz, but i think you miss understood me, i aplologize if you don t.
You see my problem is exactly on step 3 of those instruction.
i mean, i cannot use the clockworkmod recovery image 5.5.0.4.
i will try to explain: i power on my phone using vol+ plus vol- plus the power button, and i do get my pink screen.
my problem is: in order to install the clockworkmod i need to connect the phone to the pc while my phone is on the pink screen. and this is exactly what i can t do. i mean, i have the pink screen, but when i plug my phone into the pc while on the pink screen, the pc wont recognize or connect to the phone.
so to summarize: basically i cannot follow step 3 of those instructions because i don t have the recovery 5.5.0.4 installed, because i cannot install it.
i assume, and i am sorry if i m wrong, that the recovery image that is on the tutorial you passed me is the clockworkmod recovery.
i hope you understand correctly the problem i have and if you can help me i thank you, i you cannot i thank you anyway.
Anyway, if no one can help me i am going to quit and let my phone the way it is now, because i don t wanna end up bricking my phone and my english is not the best so i understand that is difficult for people to help me.
i thank you anyway.

Seriously, you must do a litle research before posting new threads with same questions. This way the forum bloats with same stuff unswered again and again.
It' s known(mentionded a lot of times in different threads on the forum), that huawei has blocked the pink screen functionality after B518 release. So, after this release the bootoader is locked and you can't no more see the special partitions on pc when you're on pink screen mode. There' s also a specific thread which explains how to get the unlocked pink screen back. Search for "Get back your pink screen" thread on developement section(this maybe easy be the 10th time I post this info).

skidrow45 said:
I thank you for the help Qqqxxxzzz, but i think you miss understood me, i aplologize if you don t.
You see my problem is exactly on step 3 of those instruction.
i mean, i cannot use the clockworkmod recovery image 5.5.0.4.
i will try to explain: i power on my phone using vol+ plus vol- plus the power button, and i do get my pink screen.
my problem is: in order to install the clockworkmod i need to connect the phone to the pc while my phone is on the pink screen. and this is exactly what i can t do. i mean, i have the pink screen, but when i plug my phone into the pc while on the pink screen, the pc wont recognize or connect to the phone.
so to summarize: basically i cannot follow step 3 of those instructions because i don t have the recovery 5.5.0.4 installed, because i cannot install it.
i assume, and i am sorry if i m wrong, that the recovery image that is on the tutorial you passed me is the clockworkmod recovery.
i hope you understand correctly the problem i have and if you can help me i thank you, i you cannot i thank you anyway.
Anyway, if no one can help me i am going to quit and let my phone the way it is now, because i don t wanna end up bricking my phone and my english is not the best so i understand that is difficult for people to help me.
i thank you anyway.
Click to expand...
Click to collapse
You can't install CWM via pink screen in B522 and later releases.
1. Root you phone
2. Download 5.5.0.4 recovery
3. Use root explorer/es file explorer/any other file manager which can get root access
4. Move recovery.img to /.cust_backup/image
5. reboot
Sent from my GT-P1000 using Tapatalk 2

dancer_69 said:
Seriously, you must do a litle research before posting new threads with same questions. This way the forum bloats with same stuff unswered again and again.
It' s known(mentionded a lot of times in different threads on the forum), that huawei has blocked the pink screen functionality after B518 release. So, after this release the bootoader is locked and you can't no more see the special partitions on pc when you're on pink screen mode. There' s also a specific thread which explains how to get the unlocked pink screen back. Search for "Get back your pink screen" thread on developement section(this maybe easy be the 10th time I post this info).
Click to expand...
Click to collapse
Apply only if you have upgraded your phone to B522 or newer. You may have a custom ROM on top, but the base has to be B522 or newer.
Tested by myself on B522, B526. Reported working on B528.
The steps required to get back pink/blue screen USB:
Automatic flashable zip is pretty much fail proof, but I have warned you.
Automatic method (recommended):
Download update-B518-bootloader.zip from MediaFire.- done
Save it to the root of your SD Card.-done
Start the phone in recovery mode (recommended recovery is 5.5.0.4)- cannot do, because i cannot install recovery 5.5.0.4
Select "install zip from sdcard"
Select "chooze zip from sdcard"
Select the zip you downloaded before.
Select yes.
Reboot and enjoy!
The only way to install recovery 5.5.0.4, is to power on phone with vol+, vol- and power buttom, and when i do that, i get the pink screen but no usb on pc, so i cannot install (recommended recovery is 5.5.0.4), because to do that i need the usb.
ok. i am done trying and i am going to quit.
thank you for the help.
you may close this tread if you wish.

Qqqxxxzzz said:
You can't install CWM via pink screen in B522 and later releases.
1. Root you phone
2. Download 5.5.0.4 recovery
3. Use root explorer/es file explorer/any other file manager which can get root access
4. Move recovery.img to /.cust_backup/image
5. reboot
Sent from my GT-P1000 using Tapatalk 2
Click to expand...
Click to collapse
Thank you so much, Qqqxxxzzz, and i am sorry to dancer_69 for my reply. i wrote before i saw Qqqxxxzzz reply. i hope you don t hate me dancer_69, but i am very very new at these things so not every tread and tutorials are easy for me to understand.
Anyway, i have done what Qqqxxxzzz, told me to do and it worked.
Thank you everybody and i am sorry to have bother you.

skidrow45 said:
The only way to install recovery 5.5.0.4, is to power on phone with vol+, vol- and power buttom, and when i do that, i get the pink screen but no usb on pc, so i cannot install (recommended recovery is 5.5.0.4), because to do that i need the usb.
Click to expand...
Click to collapse
No, it' isnt.
Qqqxxxzzz already post the other way above.
And also you can replace the bootloader directly with the second way.

dancer_69 said:
No, it' isnt.
Qqqxxxzzz already post the other way above.
And also you can replace the bootloader directly with the second way.
Click to expand...
Click to collapse
Yes, you are totally right, and i am very sorry.
i have already install using all of yours instructions and everything is fine now, and working great.
I thank you all again, and once again apologize for been bothering you.
like i said i am very new to all of this of smartphones, and i perhaps saw the solution to my problems in other treads, but i couldn t understand.
I will pay more attention next time before i start asking questions in here.
best regards to all of you.

[Q] Black screen and bootloop

Hi,
1. I rooted my phone successfully.
2. I installed droid2recovery.apk
3. Restarted. Installed CM10 and Gaaps (wrong version)
4. Reboot. Everything was normal with some annoyances due to the wrong version of Gaaps.
5. Checked and the phone was already rooted in CM10. Installed droid2recovery.apk again. Reboot.
6. Trapped in bootloop.
7. Reboot and enter in system recover.
8. Tried to install CM10 and correct Gaaps. Not possible due to failed to verify whole-file signature.
9. Discover that official recover mode doesn't install unofficial roms.
10. Searched for official roms of Milestone 2 BR. All links are broken.
11. I flashed downgrade_for_bl_3 with RSD Lite. Everything was ok. PASS.
12. Still bootloop. Enter in recover mode. Black screen. Can't see the android icon with exclamation mark.
Is my phone a paper holder now? Please advise.

I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???

douglasrac said:
I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???
Click to expand...
Click to collapse
You have to flash that same Android 2.3.6 SBF file, you can't use any more that "another sbf". For rooting that 2.3.6 use this http://forum.xda-developers.com/showthread.php?t=1750277
http://forum.xda-developers.com/showthread.php?t=1758271 this can help too
After you get CM10 back running, do not use droid2recovery.apk anymore!

Thank you. That really helped.
After you get CM10 back running, do not use droid2recovery.apk anymore!
Click to expand...
Click to collapse
Why not?

Odp: [Q] Black screen and bootloop
douglasrac said:
Thank you. That really helped.
Why not?
Click to expand...
Click to collapse
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk

henediac said:
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk
Click to expand...
Click to collapse
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?

You can still flash other sbfs, but when do turn on, you need to go in recovery mode, than clear cache and data. It will start normally again.
To go to stock recovery hold when turn on "@" or "x", than when show the "android with ! " you hold volume - and foto or volume + and foto or the volume + and -, than you are in recovery.
Sorry about my English
I am showing all the option because I do not remember perfect what to do... But it works
Sent from my A953 using xda app-developers app

cant get it to work..anyone got a link to a froyo stock sbf?

@Yostarone
http://sbf.droid-developers.org/umts_milestone2/list.php
i don't know what froyo rom you want, so I put link to whole list. (build number for eu froyo is MILS2_U6_2.4.24).

paulimbr said:
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?
Click to expand...
Click to collapse
I didn't get it working. Did you?

douglasrac said:
I didn't get it working. Did you?
Click to expand...
Click to collapse
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it

lulli1 said:
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it
Click to expand...
Click to collapse
I wish it was that simple. After flashing the phone is completely dead. And now I cant even go to bootloader anymore.... :crying:

could your problem be battery related? do you have a chance to try using another battery?

lulli1 said:
could your problem be battery related? do you have a chance to try using another battery?
Click to expand...
Click to collapse
Hi,
Sorry for the late reply. I was charging the battery
No, the problem is not the battery. Nothing works anymore. The phone doesn't even turn ON. All Black screen, not even boot loop.
So I get into the bootloader and flash new room. I can see the SN Updated text. But that is it. After it doesn't work.
I flashed DOWNGRADE BL =3 and then I flashed MILA2_U6_3.12.0_SIGNED_US1MILESTONE2PERARB125LA016.0R_GSXMILETPERARLA_P022_A013_M006_HWp2a_WIG142538_Service1FF
Nothing. Black Screen.
Then I flash M2L_U6_4.5.2_51-27_R01_SIGNED_US1MILA2GBPERARB125LA001.0R_STABLE45LAMILETPERLA_P013_A028_M001_HWp2a_Service1FF.
Then I get boot loop.
:S

[Q] by mistakely formatted /boot

can someone tell me what can i do?? i by mistakely formatted /boot. my phone when switched on gives a blue screen. please someone help.

In Blue screen,connect your phone to PC and wait 1 minute. A storage will show if you was in B518 bootloader. If the storage shows,please report here

forumber2 said:
In Blue screen,connect your phone to PC and wait 1 minute. A storage will show if you was in B518 bootloader. If the storage shows,please report here
Click to expand...
Click to collapse
no....its not giving any response

aashi02 said:
no....its not giving any response
Click to expand...
Click to collapse
You must install a offical firmware if storage doesn't show in blue screen.

forumber2 said:
You must install a offical firmware if storage doesn't show in blue screen.
Click to expand...
Click to collapse
i was using cwm and Mlora 0.4 ..... i had formatted /boot in cwm by mistake

aashi02 said:
i was using cwm and Mlora 0.4 ..... i had formatted /boot in cwm by mistake
Click to expand...
Click to collapse
So You must install a offical firmware again if storage doesn't show in blue screen.

aashi02 said:
can someone tell me what can i do?? i by mistakely formatted /boot. my phone when switched on gives a blue screen. please someone help.
Click to expand...
Click to collapse
I also had the same issue like you did.
I re-wrote everything into a FAQ. IF there's a problem anywhere, just reply in your thread. If its solved then the walkthrough is useful. If it doesn't get solved we'll just add your issue into the list and troubleshoot until it works.
http://forum.xda-developers.com/showthread.php?t=2277655

forumber2 said:
So You must install a offical firmware again if storage doesn't show in blue screen.
Click to expand...
Click to collapse
so what steps should i follow now??

aashi02 said:
so what steps should i follow now??
Click to expand...
Click to collapse
download official firmware,
extract to external SD card,
XLOAD/UPDATE.APP
(X stands for your external sd card drive number)
turn on the phone with power button and volume down button (pink screen)
the restoration should begin.

I make diferent way, I download a backup of all files of pinkscreen and put it the pinkscreen and downlod the recovery after that the phone start work normaly,
I hope that will help
Sorry my bad eng

badiyee said:
download official firmware,
extract to external SD card,
XLOAD/UPDATE.APP
(X stands for your external sd card drive number)
turn on the phone with power button and volume down button (pink screen)
the restoration should begin.
Click to expand...
Click to collapse
yes it installed sucessfully. But it just shows the huawei logo and then the animation and then again goes off and tries to go on. i installed 2.3.5 the official one. but i cant understand why its going off again and again. please help. my cwm is also replaced by the original recovery. please tell me what i can do.

aashi02 said:
yes it installed sucessfully. But it just shows the huawei logo and then the animation and then again goes off and tries to go on. i installed 2.3.5 the official one. but i cant understand why its going off again and again. please help. my cwm is also replaced by the original recovery. please tell me what i can do.
Click to expand...
Click to collapse
wait. wait. wait.(on the screen)
1. 1/2 updating
2. 2/2 updating
3. big tick
4. restarting.
then it should restart. again, and again, and again. and it will continue to bootloop until it actually boots up successfully for the first time. Please remove battery, plug in usb cable then only perform the upgrade (YES, WITHOUT THE BATTERY!)
Tell me if it works this way.
Or, is the problem that is something like this:
1. Huawei logo shows
2. Huawei logo with some firework animation, then slows down, then complete freeze, then again reboot? and same thing happen?
erm, add on: i forgot.
Let's assume you have done all of the above, but the ROM again crashes spectacularly on its own... try doing this.
1. Remove battery
2. plug in usb cable.
3. press power ON and volume up button
it should be no more blue screen but a *<3E>* recovery.

badiyee said:
wait. wait. wait.(on the screen)
1. 1/2 updating
2. 2/2 updating
3. big tick
4. restarting.
then it should restart. again, and again, and again. and it will continue to bootloop until it actually boots up successfully for the first time. Please remove battery, plug in usb cable then only perform the upgrade (YES, WITHOUT THE BATTERY!)
Tell me if it works this way.
Or, is the problem that is something like this:
1. Huawei logo shows
2. Huawei logo with some firework animation, then slows down, then complete freeze, then again reboot? and same thing happen?
erm, add on: i forgot.
Let's assume you have done all of the above, but the ROM again crashes spectacularly on its own... try doing this.
1. Remove battery
2. plug in usb cable.
3. press power ON and volume up button
it should be no more blue screen but a *<3E>* recovery.
Click to expand...
Click to collapse
hey thanks soooooo much. U are simply awesome. My phone is working now. U are great dude. I just did factory reset in recovery and it started. thanks alot.

most welcome. Have fun.

badiyee said:
most welcome. Have fun.
Click to expand...
Click to collapse
hey i still need help........ each time i switch off my phone and try to start it, it always shows the animation and then again goess off and again the animation comes and goes again andagain.. plz help .. tell me what to do.please

aashi02 said:
hey i still need help........ each time i switch off my phone and try to start it, it always shows the animation and then again goess off and again the animation comes and goes again andagain.. plz help .. tell me what to do.please
Click to expand...
Click to collapse
Can you boot on recovery?

xtugap said:
Can you still boot on recovery?
Click to expand...
Click to collapse
yea i can.but its the default recovery of huawei.

aashi02 said:
yea i can.but its the default recovery of huawei.
Click to expand...
Click to collapse
You didt install cwm? Can you swich to pinkscreenmod to change the recovery file? Or your pc do not detect the phone?

xtugap said:
You didt install cwm? Can you swich to pinkscreenmod to change the recovery file? Or your pc do not detect the phone?
Click to expand...
Click to collapse
i had cwm before but once i formatted boot and did the steps said by baidiyee it got replaced by default huawei recovery.....and ya my phone is not detected by my pc in that pink screen.

Right, stay calm, this is easy to fix. Im not in pc so you need to do all work. Turn your phone in punkscreen mod after right click on my computer and click in tje second option (i dont remember the name :-s manage I think). On that window click on manage devience. Now on the line apears outher deviences look for android devience or huawei, right click and click update driver (on the first option)
I think after that you are ready to install the new recovery
I will fo rest for now I will wait a few mins for your reply and I will go sleep I'm tired with you don't fix your problem I promise you, tomorow I will help you

[q] my defy plus is not starting up!!!!!!

Hi,
I have Motorola Defy Plus,I had read that it is possible to update android from gingerbread 2.3.6 to jelly bean 4.2.2. So I decided to update my defy plus.I root my defy plus with sinit_2.3.apk
After rooting I able to go to bootloader where I first backup my phone.Then I wipe data to factory reset and then wipe cache.Then I install the zip file for jelly bean 4.2.2 and google apps from my sd card.
Then after rebooting,Now my phone is updated to jelly bean 4.2.2 . I m very happy.
But after some time I noticed that it is possible to call outgoing calls but its not possible to receive incoming calls.When anyone call me it says the user is busy.
So I decided to restore my defy plus to the original position
But when I reboot my phone and when blue led is blinked then I press vol. down key then enter to bootloader but it is different
When I press restore it is not showing that file which was I had Backup earlier.
Then I press Motorola stock recovery but a triangle type figure is appear and a android logo is appear in the middle of that triangle and my phone is stuck on that logo.
Then I pull my phone battery out and then in battery to the phone and restart.
Re-enter the bootloader, from the bootloader then wipe data to factory reset and wipe cache.
Now connect my phone to pc via usb cable. After that I choose option “mass storage……..dangerous” from that ,
Removable disk is appear in pc when I click ,it says format fist.Then I format it.now able to open it.Now I m copying my backup file that I was created to my sd card but suddenly my phone battery is low and my phone switch off.
After hard work to recharge my battery with external charger,I connect my battery to the phone which is fully charged.But now my phone is not starting up,I have neither see Motorola logo nor any bootloader screen
I already press vol. up + power button but nothing happened.I read that install Motorola device manager driver for usb and RSD Lite & Stock recovery file SBF File.
Then open RSD Lite, Now select that SBF File.Now connect your phone to pc via usb cable now RSD Lite shows phone is connected.I also seen that video on the You Tube.
But for me it is not working.When I connect my phone to pc via usb cable there is no status shown in RSD Lite that phone is connected.
My phone is not starting up now.
When I connect my phone to pc a White led is blinked once for a second then goes off…
What I do.Please Help Me!!!!!
Regards
Davinder Singh

You have Motorola Device Manager installed for correct driver recognition on computer?

themaker69 said:
You have Motorola Device Manager installed for correct driver recognition on computer?
Click to expand...
Click to collapse
Hey Thanx for your Reply
Yes I already Installed Motorola Device Manager 2.4.3
But nothing works!!!!!!!!
Please explain me in details.....Because I m new in Android world

Unfortunately your device is permanently bricked because you formatted eMMC from your computer, wiping the boot loader
Sent from my MB526 using Tapatalk 4

This is even possible? I didn't know, I thought Defy was unbrickable due to 2ndBoot.

themaker69 said:
This is even possible? I didn't know, I thought Defy was unbrickable due to 2ndBoot.
Click to expand...
Click to collapse
I thought that too ;o.
Did you try to put it into download mode ? (Power button + UP) , in the moto stock recovery if you don't see nothing , press the search button or VOL+ and VOL- at the same time.

Hold vol. up button an press power button....
If you can arrive a black screen
which shows a text with "battery OK
Ready to program"everything is prefect....
If not , you have formatted the internal disk this like you delete bios on an PC...........
Maybe repairable with an factory usb cable & the right software....
Sent from my ...no need Tod know

Goodness me, dude i feel really sad for u, i hope ur device gets to life again
sent from my Defy (bayer module) powered by Slim Bean 8.1, Jelly Bean 4.3.1

Guys You Scared.......me...
But it is right i think i exactly wipe my phone bios
But there is nothing to do now????
now my phone will not be alive again.......

What is factory usb cable...
Can you tell me where i buy the Factory USB Cable?????

It doesn't matter which cable you are using (you can buy it from amazon/ebay , it depends from where are you from..) , if you can put the phone in download mode ( POWER BUTTON + VOL UP ) , your phone is saved . If not.. Maybe you can try to a gsm repair shop.

Maybe this can help
http://forum.xda-developers.com/showthread.php?t=1623169
Sent from my ...no need Tod know

bone101 said:
Maybe this can help
http://forum.xda-developers.com/showthread.php?t=1623169
Sent from my ...no need Tod know
Click to expand...
Click to collapse
Thanx...
But I can't found any solution there.....
Please Help!!!!!

davinderwadhwa22 said:
Thanx...
But I can't found any solution there.....
Please Help!!!!!
Click to expand...
Click to collapse
If you can't connect to USB in any way you bricked your defy....
Im sorry for you
The only thing, you can do, is to find anyone who can flash data to your emmc without using standard USB connection....
Maybe a mobile repair shop (for Motorola) could do this .
But I'm don't think so
Report back if you have found some...
Sent from my MB526 using xda app-developers app