Update Hboot - Click General

Dear
i have HTC Tattoo. When i unlock boot loader with the help of htcdev.com (I allready download the CLIC11000_Click_hboot_0.54.0003 from htcdev.com) i open it but it show the error no 170
I allready install the htc sync, Java and android sdk software.
pls help me.

Enable USB Debugging on your phone

You may want to try disabling your firewall while doing that.

Unlock bootloader
kemoba said:
Enable USB Debugging on your phone
Click to expand...
Click to collapse
I update the hboot
when i press the combination of power on and volume down key then it show hboot version and more but under fastboot it cannot show bootloader or anywhere. According htcdev.com this option is under fastboot...
Or other way to unlock the bootloader of htc tattoo.
pls help me.

Related

htc magic breaked

htc magic stuck in htc magic boot screen, it keeps rebooting after playing the htc welcome sound.
it was not rooted before & i have no backup room. fastboot can't recognize the device
C:\SDK_15\tools>fastboot devices
< waiting for device >
all the drivers are installed
is there any chance to recover it?
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
octupusisonfire said:
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
Click to expand...
Click to collapse
If they find out it was due to rooting they will charge you for any repairs. If not, then you are lucky and you get a free repair
chinang said:
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
Click to expand...
Click to collapse
white htc magic mate. so is there a chance to recover it?
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
digitaljeff said:
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
Click to expand...
Click to collapse
yes i can access recovery mode but there's no options in there
in fastboot mode,
Does it appear fastboot USB ?
jgcaap said:
in fastboot mode,
Does it appear fastboot USB ?
Click to expand...
Click to collapse
yes, it appears
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
jgcaap said:
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
Click to expand...
Click to collapse
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
paloma728 said:
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
Click to expand...
Click to collapse
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
jgcaap said:
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
Click to expand...
Click to collapse
i have no warranty mate. i hv done nothing to the phone. concerning experiment im ready ks i hv nothing to lose.
besides, two weeks ago i gave to a gsm-shop for unlock, is there any chance of..........
ok lets try this first without rooting. try to put in fastboot mode and upgrade a ROM from HTC official site same version you are using now. (Not the update from january but november)
the unlock procedure does not affect the phone performance so do not worry. is a complete seperate region in your phone.
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
jgcaap said:
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
Click to expand...
Click to collapse
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
paloma728 said:
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
Click to expand...
Click to collapse
just unroot and restart. get the sap.img and load it
jgcaap said:
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
Click to expand...
Click to collapse
ok mate i will give it a try then post result.
thank you very much
did it work ?

Impossible to get Radio S-Off on my DHD... Im going craaaaaazy

Hi...
Im went throught the guide under for like 10 times doing this from ADB and from the terminal in my phone and everything is fine and done but nothing happends in the end and the CID is not 11111111 like Im suppose to get I thought ok fine Im just gonna flast another radio img and thats it but that didnt work either I get a big fat FAILED. can someone please help im going crazy..
http://forum.xda-developers.com/wik..._Vision#VERIFY_.28using_.22gfree_verify.22.29
I have permrooted my phone with Visionary does that have anything to do with why I can get Radio S-OFF??
Phone info is as fallow :
ACE PVT ENG S-OFF
HBOOT-0.85.2007 (PD9810000)
MICROP-0438
RADIO-26.03.02.26_M
eMMC-boot
October 11 2010, 12:44:14
What steps did you follow..
I have read tht you must temproot first and then permroot..
Also there is a very nice radio flashing guide floating around.. i have made a backup so i will copy paste it for you here..
1 download android sdk extract files to c direct to c drive rename androidsdk
2.open file click sdk manager let open then click accept let it install every thing
3. Open platform tools copy the 2 adb files as per previous post page 190 by tmh ( I think)to tools folder
4.open file downloaded from post 1st post extract to desktop easier to find
5. Open androidsdk tool folder then drag and drop radio.img in
6. click on start menu type cmd then click on the file
7.once open type cd/ press enter
8.type cd androidsdk/tools/ press enter
9.at this point make sure phone plugged in via usb and turned on as normal type in adb devices this will find your phone a show your serial number if this fails you will need usbdeview to uninstall all drivers to start again if it shows serial number carry on
10. Turn fastboot off on phone and power phone down.
11. Once powered down reboot phone while usb plugged in holding volume down and power button till white bootloader screen appears
12.use volume keys to navigate to fastboot( should be top of list ) press power button
13. Back on pc in cmd it should still read c:\androidsdk\tools> (if not repeat steps 6-8) once at this point type fastboot flash radio radio.img press enter wait till it flashed the c:\androidsdk\tools> will be back waiting for next command
14.type fastboot reboot press enter your phone should reboot at this point once rebooted you can check it flashed in settings>about phone
Look at this video as well
http://www.youtube.com/watch?v=b1qgKA_eT2g&feature=related
http://www.youtube.com/watch?v=dTFphGbgqbQ
You need a sdcard installed and permroot.
Sent from my Desire HD using XDA App
umm doesnt "ACE PVT ENG S-OFF" mean you have S-OFF ??
and why make things complicated why not use jkoljo one click tool from HERE
Eng Off = Radio S-OFF
prateekgujral said:
Eng Off = Radio S-OFF
Click to expand...
Click to collapse
ENG s-off is just the hboot been patched so it tells the radio the sercurity is off
were radio s-off is the sercurity is off
prateekgujral
Eng Off = Radio S-OFF
Click to expand...
Click to collapse
NOOOOOOO please do not post **** like that if you don't no what the difference between Radio S-Off and Engineering S-Off. I just found out as did many other people that there is a big differnence. I had Eng S-Off and not Radio S-Off and loaded LeeDrOiD 1.3 (containing HTC's new security "feautured" 1.72.405.3 ROM). Now I am permanently locked out from doing a Radio S-off and I cannot get R/W access to the system folder. Who knows what else root aceess is limited. PLEASE EVERYONE LOAD RADIO S-OFF. To make sure it's active look for more info or system info on the bootloader after installing clockwork recovery (hold volume down when powering on phone). It must say CID:111111. You don't want to see CID-VODAP021 or CID-HTC__001 or anything else. Anything then other than 111111 means radio is S-On!!
LOL... my bad!! As you say it in the first line of your post .. you just found out yourself!!
Control your emotions though champ!!
Yoshi_523 said:
NOOOOOOO please do not post **** like that if you don't no what the difference between Radio S-Off and Engineering S-Off. I just found out as did many other people that there is a big differnence. I had Eng S-Off and not Radio S-Off and loaded LeeDrOiD 1.3 (containing HTC's new security "feautured" 1.72.405.3 ROM). Now I am permanently locked out from doing a Radio S-off and I cannot get R/W access to the system folder. Who knows what else root aceess is limited. PLEASE EVERYONE LOAD RADIO S-OFF. To make sure it's active look for more info or system info on the bootloader after installing clockwork recovery (hold volume down when powering on phone). It must say CID:111111. You don't want to see CID-VODAP021 or CID-HTC__001 or anything else. Anything then other than 111111 means radio is S-On!!
Click to expand...
Click to collapse
Yoshi_523 said:
NOOOOOOO please do not post **** like that if you don't no what the difference between Radio S-Off and Engineering S-Off. I just found out as did many other people that there is a big differnence. I had Eng S-Off and not Radio S-Off and loaded LeeDrOiD 1.3 (containing HTC's new security "feautured" 1.72.405.3 ROM). Now I am permanently locked out from doing a Radio S-off and I cannot get R/W access to the system folder. Who knows what else root aceess is limited. PLEASE EVERYONE LOAD RADIO S-OFF. To make sure it's active look for more info or system info on the bootloader after installing clockwork recovery (hold volume down when powering on phone). It must say CID:111111. You don't want to see CID-VODAP021 or CID-HTC__001 or anything else. Anything then other than 111111 means radio is S-On!!
Click to expand...
Click to collapse
You need to take your own advice and stop posting **** too, highlighted section of your post is total bull****. Not a chance in hell that flashing Leedroid's rom could lock your phone
prateekgujral said:
What steps did you follow..
I have read tht you must temproot first and then permroot..
Also there is a very nice radio flashing guide floating around.. i have made a backup so i will copy paste it for you here..
1 download android sdk extract files to c direct to c drive rename androidsdk
2.open file click sdk manager let open then click accept let it install every thing
3. Open platform tools copy the 2 adb files as per previous post page 190 by tmh ( I think)to tools folder
4.open file downloaded from post 1st post extract to desktop easier to find
5. Open androidsdk tool folder then drag and drop radio.img in
6. click on start menu type cmd then click on the file
7.once open type cd/ press enter
8.type cd androidsdk/tools/ press enter
9.at this point make sure phone plugged in via usb and turned on as normal type in adb devices this will find your phone a show your serial number if this fails you will need usbdeview to uninstall all drivers to start again if it shows serial number carry on
10. Turn fastboot off on phone and power phone down.
11. Once powered down reboot phone while usb plugged in holding volume down and power button till white bootloader screen appears
12.use volume keys to navigate to fastboot( should be top of list ) press power button
13. Back on pc in cmd it should still read c:\androidsdk\tools> (if not repeat steps 6-8) once at this point type fastboot flash radio radio.img press enter wait till it flashed the c:\androidsdk\tools> will be back waiting for next command
14.type fastboot reboot press enter your phone should reboot at this point once rebooted you can check it flashed in settings>about phone
Look at this video as well
http://www.youtube.com/watch?v=b1qgKA_eT2g&feature=related
http://www.youtube.com/watch?v=dTFphGbgqbQ
Click to expand...
Click to collapse
My phone is perm rooted and I have Hboot S-Off which means I can bypass/trick the security when installing roms and etc but its limited, I cant flash a new radio.img because the not limited security (ie. Radio) is still S-ON (in other words I dont have CID111111)
jokies said:
You need a sdcard installed and permroot.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Thank for the replay, but please read what I wrote before answering, its stated clearly that my phone is perm rooted and ENG S-OFF but not Radio S-OFF.
Framedtrash said:
umm doesnt "ACE PVT ENG S-OFF" mean you have S-OFF ??
and why make things complicated why not use jkoljo one click tool from HERE
Click to expand...
Click to collapse
it would be the easiest way even thought I like to do things manually to be sure of what Im doing, but right now Im willing to try it out, the only problem is I dont own a Windows PC, only a Mac and there is no such software for Mac
Please read my first post carefully and see if Im doing something wrong because I've become immune to see my own faults now..
Done, had to barrow a windows laptop to get this fixed anyone looking for the answer check my sig.

Rooting problem!!!

Hi guys...i try to root my phone with Unrevoked 3.21..
I download the usb drivers and the Unrevoked 3.21 for Windows(My OS)
in step 3:
"On your phone, you will have to select HBOOT USB at that menu by pressing volume down four times, then power. Wait until the screen flashes through an “SD Checking” message before pressing buttons; otherwise, the phone will ignore keypresses."
it doesen't apears to me tis option!!!"HBOOT USB"
it has only: HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
Please give me some advise what to do!!!!
Is your phone connected to usb haha and usb debugging enabled?
And you installed the hboot drivers?
When i connect the divice in computer??before boot in HBOOT mode??or after that?
mestizo19 said:
When i connect the divice in computer??before boot in HBOOT mode??or after that?
Click to expand...
Click to collapse
Before you boot. Well doesn't matter, it should say hboot usb anyway.
Did you try pressing hboot.
I cant press HBOOT!!only the other options!!why??
Sent from my HTC Wildfire using XDA App
Plz!!!give me some advice!!!!!
Sent from my HTC Wildfire using XDA App
In newest boot rom you don't have to select hboot mode, it enables automatically when the phone is connected to pc (and drivers are installed), if i'am wrong, please correct.
btw, if you are using newest boot rom, then i understand you have Android 2.2.1, froyo, so you CAN'T root it yet, use search.
I have 2.2.1 update..I can't root it yet???
Sent from my HTC Wildfire using XDA App
Oh now I know why, you can't root official froyo , so many threads on this, learn to search..
Official froyo can't be rooted???I am new in android...
:S so am I, this is my first android phone, I only got it for 3 months lol.
Do you know if any other official update coming???
mestizo19 said:
Do you know if any other official update coming???
Click to expand...
Click to collapse
There's no ETA. When the update will come it will be posted, rest assured on that.

Hboot and AlphaRev X and Unrevoked issue

I recently followed all the instructions on how to put a new ROM on my wildfire, but,ive done all the android usb driver installations and ive opened up unrevoked and alpharev x and its still not picking up my phone,ive turned it to debug mode and still nothing,please help
skeletor22 said:
I recently followed all the instructions on how to put a new ROM on my wildfire, but,ive done all the android usb driver installations and ive opened up unrevoked and alpharev x and its still not picking up my phone,ive turned it to debug mode and still nothing,please help
Click to expand...
Click to collapse
pls search.
u should not use unrevoked here.
[Exit all the applications that use usb debugging from ur pc and phone. Like htc sync and others like tethering apps. etc...,] Better if u uninstall htc sync.
Follow this guide (and also try first if u have hboot 1.01.0002)
http://forum.xda-developers.com/showthread.php?t=1130881
And if u have hboot 1.01.0002 then first try and if it doesn't work , u can downgrade it to 1.01.0001 with this guide (thanks to ief)
http://forum.xda-developers.com/showthread.php?t=1132028

[Q] [FASTBOOT] HTC MAGIC 32A bricked?

specs:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
what i have done:
http://forum.xda-developers.com/showthread.php?t=605239 (the upgrade part)
with the files from *urgh* cant find the link again.. *search in history*
edit; cant find the url, f***, anyway, the filenames was "update-hboot-1.76.2007-signed.zip", "NewRadio.img"
what i want to do:
get a new ROM on the phone, with 2.0+ with sense
i can't flash recovery with fastboot, however, i can boot into 1 with fastboot boot /path/to/img in CMD.
however, that does not seem to work, i suspect it has something to do with the errors im getting on fastboot.
the errors are:
SD Checking...
Loading... [SAPPDIAG.zip]
No image!
Loading... [SAPPDIAG3.nbh]
No image or wrong image!
Loading... [SAPPDIAG2.nbh]
No image or wrong image!
Loading... [SAPPDIAG.nbh]
No image or wrong image!
Loading... [SAPPIMG.zip]
No image!
i have no idea what happend =3 im such a noob on this.. =(
would be very happy if someone could help me ASAP, as i don't have any other mobile at the moment.
oh and, i can't boot into the ROM i've tried to "install" with carz recovery img, the rom "Magic13" that i got from here, somewhere..
actually, i would be very happy if i could just get it back to its original shape, hardrest and all that doesnt seem to work either..
1. These errors are not in fastboot, but in hboot-mode...
SD Checking...
Loading... [SAPPDIAG.zip]
No image!
and blah-blah-blah
2. Your phone is not bricked
3. To get right combo hboot/radio with S-OFF and abiltiy to install custom roms you must do this: http://forum.xda-developers.com/showpost.php?p=5526163&postcount=1
5[Strogino] said:
1. These errors are not in fastboot, but in hboot-mode...
SD Checking...
Loading... [SAPPDIAG.zip]
No image!
and blah-blah-blah
2. Your phone is not bricked
3. To get right combo hboot/radio with S-OFF and abiltiy to install custom roms you must do this: http://forum.xda-developers.com/showpost.php?p=5526163&postcount=1
Click to expand...
Click to collapse
i can't do the RUU because i can't boot my phone, its stuck on splash screen, so the program cant find the phone.
sorry, i should have mentioned that too.
comoba said:
i can't do the RUU because i can't boot my phone, its stuck on splash screen, so the program cant find the phone.
sorry, i should have mentioned that too.
Click to expand...
Click to collapse
1. Remove battery, wait 5-10 seconds, place it back
2. Turn phone on by pressing and holding Back + Power (phone should load into fastboot)
3. Connect to PC, if connected successfully - text 'fastboot' will change to 'fastboot usb'
4. Run RUU
that doesnt seem to help, it (the program) still gives usb connection error 170, but i can access it from fastboot in cmd.
=/
comoba said:
that doesnt seem to help, it (the program) still gives usb connection error 170, but i can access it from fastboot in cmd.
=/
Click to expand...
Click to collapse
Error 170 links to USB connection error.
Make sure that you've installed Android SDK Tools (with drivers package), HTC Sync (with drivers / or drivers only).
In Android SDK Tools there are two utilities: /platform-tools/adb.exe and /tools/fastboot.exe
You can check connection with PC when executing:
adb devices (in normal-mode)
fastboot devices (in fastboot-mode)
If any utility returned serial number - so you don't have any problems with usb connection and can try install RUU
5[Strogino] said:
Error 170 links to USB connection error.
Make sure that you've installed Android SDK Tools (with drivers package), HTC Sync (with drivers / or drivers only).
In Android SDK Tools there are two utilities: /platform-tools/adb.exe and /tools/fastboot.exe
You can check connection with PC when executing:
adb devices (in normal-mode)
fastboot devices (in fastboot-mode)
If any utility returned serial number - so you don't have any problems with usb connection and can try install RUU
Click to expand...
Click to collapse
the only thing im missing on that list is htc sync, so ill download it and try again, i have adb and fastboot, but im not sure that adb can connect to the phone in fastboot ( since i can't boot to ROM )
e; adb and htc sync cant find the devices, as suspected, probably due the fact that i can't boot the device other then with "fastboot boot <recovery img>" in fastboot-usbmode.
and the program still can't find the phone after installing htc sync (same error).
comoba said:
the only thing im missing on that list is htc sync, so ill download it and try again, i have adb and fastboot, but im not sure that adb can connect to the phone in fastboot ( since i can't boot to ROM )
e; adb and htc sync cant find the devices, as suspected, probably due the fact that i can't boot the device other then with "fastboot boot <recovery img>" in fastboot-usbmode.
and the program still can't find the phone after installing htc sync (same error).
Click to expand...
Click to collapse
Yeah. Adb works only in normal-mode, but fastboot.exe works in fastboot-mode.
So...
Load into fastboot-mode
Run command
Code:
fastboot devices
Does it return serial number?
5[Strogino] said:
Yeah. Adb works only in normal-mode, but fastboot.exe works in fastboot-mode.
So...
Load into fastboot-mode
Run command
Code:
fastboot devices
Does it return serial number?
Click to expand...
Click to collapse
yes it returns "HT95PKF03141 fastboot", but what do i do with that?
Your computer can see phone, but you have to change usb-cable or usb-port.
Sent from my A7-040 using Tapatalk
5[Strogino] said:
Your computer can see phone, but you have to change usb-cable or usb-port.
Sent from my A7-040 using Tapatalk
Click to expand...
Click to collapse
oh ok... that makes sense, i think, because i've been using a unorignal cable since my original cable is borrowed out.
who knew a cable could make such a hassle.
comoba said:
oh ok... that makes sense, i think, because i've been using a unorignal cable since my original cable is borrowed out.
Click to expand...
Click to collapse
actually, same error with original cable...
maybe it's the OS? im using win7 64bit.. hmm, ill try find a computer with a 32bit OS.
Edit; got a hold of a winXP computer, it seems to work.
what's a good ROM for atleast 1.6 or higher with HTC Sense?
comoba said:
Edit; got a hold of a winXP computer, it seems to work.
what's a good ROM for atleast 1.6 or higher with HTC Sense?
Click to expand...
Click to collapse
Congratulations)
If you are on 1.76.2007 / 6.35.XX.XX so you can try this:
http://forum.xda-developers.com/showthread.php?t=1025330 (Android 2.3.3 with Sense)
or with Android 2.1 but more native (stable, fast and smooth)
http://forum.xda-developers.com/showthread.php?t=778083
http://forum.xda-developers.com/showthread.php?t=822531
a few questions about the guide posted, since i haven't done anything yet other then the RUU so i could atleast use the phone...
do i really need a goldcard? i've read the guide, and it doesnt seems to do anything but edit my sdcard, which seems weird since it works to the phone already and it seems i already have root, because 'adb shell' gives me #, and i downloaded superuser, which doesn't seem to be any issue, but i still have S-On, so i'm a bit confused about that.
where do i get the SPL & HBoot? the links seems to be missing in the guide.
i guess i should flash new SPL and HBoot before saying this, but the error in hboot still exists after RUU.
thanks for all the help =)
comoba said:
a few questions about the guide posted, since i haven't done anything yet other then the RUU so i could atleast use the phone...
do i really need a goldcard?
Click to expand...
Click to collapse
Every time if you want flash official ROM that is not for your country/operator you need goldcard. In general, phone has own CID (example HTC__037 - Indonesia), ROM has list of compatible CIDs. While flashing ROM is checking list with phone's CID. If they are not equal - you will get error. Goldcard emulates cid 11111111 which is always in ROM CID list.
comoba said:
but i still have S-On, so i'm a bit confused about that.
Click to expand...
Click to collapse
Yeah, to do S-OFF you must flash engineering bootloader. Hboot which compatible to radio 6.35.XX.XX is hboot 1.76.2007
comoba said:
where do i get the SPL & HBoot? the links seems to be missing in the guide.
i guess i should flash new SPL and HBoot before saying this, but the error in hboot still exists after RUU.
thanks for all the help =)
Click to expand...
Click to collapse
SPL and HBoot and Bootloader are same things (in general, when people write manuals)
And yes, you need flash HBoot 1.76.2007 - you will get more abilities (like fastboot commands)
HBoot 1.76.2007 ENG S-OFF here: Download Flash via custom recovery

Categories

Resources