PC won't recognize Samsung galaxy tab 7510 wifi after installing jellybean - tried turning USB debugging off. Also I can't access USB storage?
Any advice appreciated.
rersiot structures.
loulivie said:
PC won't recognize Samsung galaxy tab 7510 wifi after installing jellybean - tried turning USB debugging off. Also I can't access USB storage?
Any advice appreciated.
Click to expand...
Click to collapse
Yeah I finally figured this out. When you go under settings click on "storage". After that click on the settings icon on the upper right hand corner(the three dots). This will bring up a pop up "USB computer connection" then just click on "Media device". That should do it!
Thanks for the quick reply - problem solved!!
deleted
davidimdpt said:
Yeah I finally figured this out. When you go under settings click on "storage". After that click on the settings icon on the upper right hand corner(the three dots). This will bring up a pop up "USB computer connection" then just click on "Media device". That should do it!
Click to expand...
Click to collapse
You make my day...
you r my hero for today!
davidimdpt said:
Yeah I finally figured this out. When you go under settings click on "storage". After that click on the settings icon on the upper right hand corner(the three dots). This will bring up a pop up "USB computer connection" then just click on "Media device". That should do it!
Click to expand...
Click to collapse
i dont have those 3 dots, debugging and drawing, usb storage, all those things are grey and i cant click the
i have that exact problem right now
grimtatu said:
i dont have those 3 dots, debugging and drawing, usb storage, all those things are grey and i cant click the
i have that exact problem right now
Click to expand...
Click to collapse
Disconnect the USB connection first, then you should be able to make the change and re-connect.
Related
Hi all I am using HTC HD, when i first connect the phone to my com. there is a pop out screen asking me which type of connection i want, which is the active syn, as a Disk drive or as a modem. but the interface has disappear after an incident.. it is an incident when the screen pop out and i didnt choose anything for a long time till the screen auto off. then when i on back it is opens the internet sharing application. after this .everytime i connect my phone to any com, this internet sharing pops out. its very irritating and i hope the option screen to come back without hard reseting. can anyone help?
regards
hole_yu
go into settings,connections,usb to pc. Tick the last box on the screen.
nikki-m said:
go into settings,connections,usb to pc. Tick the last box on the screen.
Click to expand...
Click to collapse
Tried this but doesnt work at all..
When i connect the phone to my computer it dosent start active sync. It automaticly shows as a usb hdd. Think i put the phone on "Disable Popup when i it gets connected to a computer with usb". But cant find a way to enable it again.
Tried to go on "internet > Active Sync" on the phone. But it dosent help.
Windows Mobile 6.5 "Energy Rom".
I can aslo say that with the other "phone" i have. My work mobile. It automaticly starts.
TC,
Go under settings > Connections. It is one of the settings there which will ask you how you'd want the phone to react when a USB is plugged in. You can choose ActiveSync there.
Cheers.
PoisonWolf said:
TC,
Go under settings > Connections. It is one of the settings there which will ask you how you'd want the phone to react when a USB is plugged in. You can choose ActiveSync there.
Cheers.
Click to expand...
Click to collapse
Oh i found it. Think i used a hour to find it.
Settings > System > USB Settings. Well hope this tread helps someone else then
Thanks anyway mate.
I used to get a screen on my device asking me for the type of connection required like Kies, mass storage, ask on connection etc., whenever I plug in the usb into my laptop. Now after I did a hard reset, I am not getting this option but straight away gets into Kies mode...but all that I know is that there is a place where I can set this to 'ask on connection' but I guess I forgot where to find this.
Can somebody help pls.
thanks
sany said:
I used to get a screen on my device asking me for the type of connection required like Kies, mass storage, ask on connection etc., whenever I plug in the usb into my laptop. Now after I did a hard reset, I am not getting this option but straight away gets into Kies mode...but all that I know is that there is a place where I can set this to 'ask on connection' but I guess I forgot where to find this.
Can somebody help pls.
thanks
Click to expand...
Click to collapse
Settings/About phone/USB settings/ ask on connection
there you are, thanks for the quick reply. Much appreciated.
Looks like a bug to me, Suddenly I do not see the "USB connected" message on the notification bar! I have to disconnect USB and change mode from mass storage to something else and then change it back then connect USB and it shows the USB connected message with mount option.
Never had this problem with any previous builds. Also, I see the accurate battery mod shows "plug" sign while USB is connected but no "USB connected" message or mount option!
Any comments people...anyone with this problem on JI5 leak?
Simple question first. Did you leave de-bugging enabled? I updated my device thru Kies (one of the lucky ones it seems) instead of flashing Eugene's or the Odin mount and I haven't had that problem. I think I saw someone in the orginal JI5 on Kies thead mentioned this too. I tried to replicate their bug but my seems to 100% good. What's your OS?
its a bug, with mine is seems to come and go
ShinyBuddha said:
Simple question first. Did you leave de-bugging enabled? I updated my device thru Kies (one of the lucky ones it seems) instead of flashing Eugene's or the Odin mount and I haven't had that problem. I think I saw someone in the orginal JI5 on Kies thead mentioned this too. I tried to replicate their bug but my seems to 100% good. What's your OS?
Click to expand...
Click to collapse
Thanks for the reply. I flashed it through ODIN on Windows 7. Also, USB debugging was never enabled in the process. It seems like a bug because it comes and goes, randomly. Maybe this was one reason Tmobile told us not to upgrade...
demo23019 said:
its a bug, with mine is seems to come and go
Click to expand...
Click to collapse
Good to hear I am not alone with this problem...thanks for the reply...
hopefully we'll find a workaround...
Just wanted to note here, flashed to stock, formatted internal sd card, upgraded to leaked JI6 and the bug still exists, hopefully OTA JI6 fixes this
Tried OTA, erased everything, flashed from scratch still the same issue...hopefully someone has a solution, if not then this adds another reason for Froyo update
That's wierd. I upgraded to OTA and problem went away for me.
Sent from my SGH-T959 using XDA App
It's not really a bug. There is an option under Settings > Applications > USB Settings. Mine wasn't showing up either so I swithed it to "Ask on connection" then plugged the USB back in and that worked. Then I switched it back to "Mass storage" and now it immediately gets ready to mount. I guess you just have to set it that first time.
Its a bug with leaked JI6. This thread started with leaked JI6... Think he recently changed headline. And you solution was temporary fix with leaked version problem would come back. Can't comment about OTA since the problem went away with mine
Sent from my SGH-T959 using XDA App
Ok, Well I can let you know that it doesn't come back with OTA. You should flash JI6 The other builds are buggy.
wow, for those who went all the way to reformatting internal sd because of this im sorry.
all you have to do is go to settings> app settings> usb settings> and change to ask on connection
thats it, i would not really call it a bug
oh yea, and thats with JI6
kboater said:
wow, for those who went all the way to reformatting internal sd because of this im sorry.
all you have to do is go to settings> app settings> usb settings> and change to ask on connection
thats it, i would not really call it a bug
oh yea, and thats with JI6
Click to expand...
Click to collapse
THIS solves it. Just did that and everything is back to normal. With that out of the way, this JI6 software is close to perfect (the RFS file system thing is the imperfect part). This is the software this phone should've launched with. Now if they can just go to a proper file system in their 2.2 update, Sammy will have a beast of a phone.
Thanks for the replies guys. I have set the default USB to "mass storage" instead of "ask on connection" as I don't want to make a selection each time.
Now, when I connect the phone I see USB connected and sometimes there is a USB connected message in status bar with no mount option and sometimes there is no USB connected message at all... now sure what's going on. I've been seeing this problem since JI5.
I've also read some threads about this in QnA forum..thanks...
VICosPhi said:
Thanks for the replies guys. I have set the default USB to "mass storage" instead of "ask on connection" as I don't want to make a selection each time.
Now, when I connect the phone I see USB connected and sometimes there is a USB connected message in status bar with no mount option and sometimes there is no USB connected message at all... now sure what's going on. I've been seeing this problem since JI5.
I've also read some threads about this in QnA forum..thanks...
Click to expand...
Click to collapse
Just for the heck of it, if you haven't tried already. Check off debug mode. Because when you plug in usb debug mode pops up and maybe usb will also every time
Thanks for the reply... Yes I now I leave the USB debugging to always enabled. This is the only way the USB mass storage option is always presented on USB connect.
Hopefully Froyo fixes this as I've seen some other people having the issue as well...
I have never seen this issue on JI6. It always pops up "USB Connected: Select to copy files to/fom your computer" in the status when I plug in the USB cable. It's never failed, even when I had USB Debugging off.
VICosPhi said:
Thanks for the reply... Yes I now I leave the USB debugging to always enabled. This is the only way the USB mass storage option is always presented on USB connect.
Hopefully Froyo fixes this as I've seen some other people having the issue as well...
Click to expand...
Click to collapse
Just FYI, I was having this problem when I flashed the JI6 update via ODIN. Mounting would only work when I had usb debug mode on. However, I disabled USB debug mode and then went to
Settings -> Application Settings -> USB Settings
I then changed it from mass storage to ask on connection and then back to mass storage and it gives me the option to mount in status bar just fine when I connect it to the computer via usb.
HTH.
I noticed that after the update i don't get updates ffrom the market place anymore?
Anyone experience the same thing?
Are you using the auto update? I'm not sure it tells you if this is on.
When I connected to my mac (debbuging has to be left on) I get a menu to either connect to kies,mass storage and one other.
Hi everybody. I got this new myTouch 4G by T-Mobile, and when I connect it to my PC, nothing happens. I went into "Settings" and then into "Connect to PC" and chose every setting one by one, but nothing. My comp doesn't recognize it. There has to be a pretty easy fix for this, what is it?
P.S. It has a light on it, just as it's charging, and it is charging, but my PC doesn't see it connected.
Thanx for the help!!
ilyabyk83 said:
Hi everybody. I got this new myTouch 4G by T-Mobile, and when I connect it to my PC, nothing happens. I went into "Settings" and then into "Connect to PC" and chose every setting one by one, but nothing. My comp doesn't recognize it. There has to be a pretty easy fix for this, what is it?
P.S. It has a light on it, just as it's charging, and it is charging, but my PC doesn't see it connected.
Thanx for the help!!
Click to expand...
Click to collapse
Download the "USB Tethering Driver" here: http://www.htc.com/us/support/t-mobile-mytouch-4g/downloads/
While it says it's for USB tethering, it's basically just a generic driver to get Windows to recognize your phone. There's also a copy on your SD card.
unremarked said:
Download the "USB Tethering Driver" here: http://www.htc.com/us/support/t-mobile-mytouch-4g/downloads/
While it says it's for USB tethering, it's basically just a generic driver to get Windows to recognize your phone. There's also a copy on your SD card.
Click to expand...
Click to collapse
Thank You. Lets see if this helps
unremarked said:
Download the "USB Tethering Driver" here: http://www.htc.com/us/support/t-mobile-mytouch-4g/downloads/
While it says it's for USB tethering, it's basically just a generic driver to get Windows to recognize your phone. There's also a copy on your SD card.
Click to expand...
Click to collapse
It DIDN'T
ilyabyk83 said:
It DIDN'T
Click to expand...
Click to collapse
Hm, what version of Windows do you have running? Is Autorun(on Windows) turned off? What happens when you pull down the tab on your phone, and hit "Mount SD card for storage" or something similiar?
EDIT: Scratch the Mount SD thing. I forget that mySense doesn't have that option like that.
unremarked said:
Hm, what version of Windows do you have running? Is Autorun(on Windows) turned off? What happens when you pull down the tab on your phone, and hit "Mount SD card for storage" or something similiar?
EDIT: Scratch the Mount SD thing. I forget that mySense doesn't have that option like that.
Click to expand...
Click to collapse
This is Windows Vista, Autorun needs to pop up so I would be able to turn it off, and it never did. And there is nothing to pull down on the device. I know what you are talking about, but I don't see anything appear; only that light comes on orange. My pc doesn't even see it in my Device Manager. But the light does light up on the device just as if I connect it to a charger.
ilyabyk83 said:
This is Windows Vista, Autorun needs to pop up so I would be able to turn it off, and it never did. And there is nothing to pull down on the device. I know what you are talking about, but I don't see anything appear; only that light comes on orange. My pc doesn't even see it in my Device Manager. But the light does light up on the device just as if I connect it to a charger.
Click to expand...
Click to collapse
Wow, if you don't even see it in Device Manager that's beyond strange. o_o On my first phone, I connected it to my computer and it instantly recognized it. On the second device, I had to go to the link I provided to you and then guide Device Manager there for it to work.
I think someone more technical savvy will have to help you, mate. Sorry.
unremarked said:
Wow, if you don't even see it in Device Manager that's beyond strange. o_o On my first phone, I connected it to my computer and it instantly recognized it. On the second device, I had to go to the link I provided to you and then guide Device Manager there for it to work.
I think someone more technical savvy will have to help you, mate. Sorry.
Click to expand...
Click to collapse
Thank You though!!
unremarked said:
Wow, if you don't even see it in Device Manager that's beyond strange. o_o On my first phone, I connected it to my computer and it instantly recognized it. On the second device, I had to go to the link I provided to you and then guide Device Manager there for it to work.
I think someone more technical savvy will have to help you, mate. Sorry.
Click to expand...
Click to collapse
My PC is supposed to make a sound when there is something being connected to it, but nothing. I went thru all 3 settings in "Connect to PC"; I restarted my device after each, but nothing. My Device Manger doesn't refresh when I connect/disconnect the device. What could this be? Anybody has any ideas?? Thanx for your help!!
Out of continuing pondering on your issue, what happens if you connect your phone to a different USB port? Still nothing? Does anything at all show up as "?" or unknown on Device Manager. It might be listed as a "mass storage device" and you'll need to direct it manually to the driver location.
Racking my brain for ya!
unremarked said:
Out of continuing pondering on your issue, what happens if you connect your phone to a different USB port? Still nothing? Does anything at all show up as "?" or unknown on Device Manager. It might be listed as a "mass storage device" and you'll need to direct it manually to the driver location.
Racking my brain for ya!
Click to expand...
Click to collapse
Tried all eight ports I have, all nothing. I usually have a "Ding" sound when I connect any USB devices. Nothing here
ilyabyk83 said:
Tried all eight ports I have, all nothing. I usually have a "Ding" sound when I connect any USB devices. Nothing here
Click to expand...
Click to collapse
What connection mode does your phone default to? Check under Settings -> PC Connection (IIRC, phone not in hand ATM) and make sure it's not disabled. I think there is USB Storage Device, Charge Only, or Disabled. It will set the default of how the phone acts when plugged in to a PC.
You will need to test it on another pc or with another cable if possible. That would be the best way to find out what is causing the problem.
Sent from my HTC Glacier using XDA App
Weird... when I connect my phone it automatically mounts.... running on vista as well.
Jeffmeister said:
Weird... when I connect my phone it automatically mounts.... running on vista as well.
Click to expand...
Click to collapse
I should hear a ding sound when I connect it. And yes, I did try other ports, computers, cables, I just don't know what is up here. There are other issues here, but I want to resolve this first.
Sent from my HTC Glacier using XDA App
stoneyjonez said:
You will need to test it on another pc or with another cable if possible. That would be the best way to find out what is causing the problem.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I had tried that. On my HTC I went in to the connection settings, and I tried every single one there. "Charge Only", "Disk Drive", "USB Tethering". The best I get, is when I select "Disk Drive" I have my MicroSD card to show up as "Removable Disk" in my Windows Explorer. HMMMMMMMMMMM.........
ilyabyk83 said:
I had tried that. On my HTC I went in to the connection settings, and I tried every single one there. "Charge Only", "Disk Drive", "USB Tethering". The best I get, is when I select "Disk Drive" I have my MicroSD card to show up as "Removable Disk" in my Windows Explorer. HMMMMMMMMMMM.........
Click to expand...
Click to collapse
That's what should happen...So what's the problem then?
Genocaust said:
That's what should happen...So what's the problem then?
Click to expand...
Click to collapse
Hi. I need to place a file on to a ROOT of my device, install and run it, NOT on a storage card. How do I get the phone's memory itself show up on my Windows Explorer not my storage card?? I want to perform unlocking steps that are given on this forum. Thank You