Related
Hello,
When I connect my HTC Touch HD to my pc via USB it DOES Charge, but it ISN'T recognized by my pc and it DOESN'T sync via ActiveSync.
Have tried multiple Pc's and even a Mac. Also I've tried multiple USB-Cables and I've also re-installed active sync.
When going into USB-to-PC settings al options have been tested and even a hard-reset didn't do the job.
When trying to flash my rom using my memory card it just keeps saying "loading" when in bootloader mode..
As you can see I'm desperate.
Does anyone have any sugestions? Or is it my phone simply broken?
when you plug in your phone thru usb to your comp, did anything come out from your HD, prompting to sync with activesync, file transfer.. or nothing at all?
pvz said:
Hello,
When I connect my HTC Touch HD to my pc via USB it DOES Charge, but it ISN'T recognized by my pc and it DOESN'T sync via ActiveSync.
Have tried multiple Pc's and even a Mac. Also I've tried multiple USB-Cables and I've also re-installed active sync.
When going into USB-to-PC settings al options have been tested and even a hard-reset didn't do the job.
When trying to flash my rom using my memory card it just keeps saying "loading" when in bootloader mode..
As you can see I'm desperate.
Does anyone have any sugestions? Or is it my phone simply broken?
Click to expand...
Click to collapse
Did you ensure that the "Allow USB connections" in the Connections Settings of ActiveSync was ticked?
I have found this to be a problem when flashing in the past.
Same issue here
I have the same problem... tired multiple cables, OS, systems, Hard Resetting but nothing. Only 1 time after one of the Hard Reset but then gone next time. Even in the boot loader it doesn't come up...
USB Hardware screwed?
Thanks for the replies!
when you plug in your phone thru usb to your comp, did anything come out from your HD, prompting to sync with activesync, file transfer.. or nothing at all?
Click to expand...
Click to collapse
Nothing at all... Just that it is now charging..
Did you ensure that the "Allow USB connections" in the Connections Settings of ActiveSync was ticked?
I have found this to be a problem when flashing in the past.
Click to expand...
Click to collapse
Yes I made sure it was ticked... Even ran the connect button in the rop right a couple of times. Not sure that would ever help though.
So maybe it is screwed up usb hardware as saliss sugested...?
pvz said:
Thanks for the replies!
Nothing at all... Just that it is now charging..
Yes I made sure it was ticked... Even ran the connect button in the rop right a couple of times. Not sure that would ever help though.
So maybe it is screwed up usb hardware as saliss sugested...?
Click to expand...
Click to collapse
okay. If so we better go into details. Please let us know which ROM you are using. And maybe some other useful information, such as what software you installed etc.
Sorry for the late reply.
The rom I'm using is:
1.14.172.1 (24011) NLD
I hard resetted the phone multiple times, so there isn't any software on it other than the normal stuff.
Any sugestions?
Which OS you have in your PC? XP, vista or 7?
Have you checked in your phone under, settings, connections, USB, which one is selected?
Which OS you have in your PC? XP, vista or 7?
Have you checked in your phone under, settings, connections, USB, which one is selected?
Click to expand...
Click to collapse
System: Win XP
USB to PC settings is set on syc with active sync and all other options are turned off (unchecked)
did you figure this out?
I have same issue, am thinking its USB hardware as I can charge but not connect to any PC yet I can with another device using same cable.. anyone know any reputable repairers in the UK?
Hmmm, I kinda remember that HTC released new USB drivers last year...
Not sure thou, but you might take a look at their site...
MOD EDIT - Moved to General discussion
sync from Outlook
I have a slightly different problem. I have managed to sync my emails and my contacts but not my outlook diary! I have tried everything, although I suspect it has something to do with the way my Outlook is set up so I am not worrying yet!
I have turned on usb debugging and I have tried changing the usb settings and neither my phone nor my sdcard will mount. The "Usb Connected" notification appears and when I click mount nothing happens. Anyone else having this problem? I've tried just about everything. It mounts just fine on Windows but not on my mac.
I've got it rooted so if there is a way to manually mount it in terminal emu I could try that.
Any solutions? Or do I need a new phone?
I've also tried 2 different cables. Both of which work fine with other devices
Mine only worked when I did the debug mode, strange that yours is not. I am running an early 2k9 macbook with OSX 10.6. Sorry, I could not help more.
laserdemon said:
Mine only worked when I did the debug mode, strange that yours is not. I am running an early 2k9 macbook with OSX 10.5. Sorry, I could not help more.
Click to expand...
Click to collapse
I'm on 10.6 also and everyone has been saying debugging fixed it for them but for some reason it's not working for me. I'll try on my brothers macbook real quick...
EDIT: Works perfectly on my brothers macbook running 10.6. I have no idea why it won't work on mine
I dont have that problem, I'm running 10.6 on my mac. if you try on your brothers mac and it doesn't work, the try a reset to your phone, maybe it will help you
I found that the icons didn't appear in my finder side bar, or on my desktop. Open a finder window, click on the icon for your computer in the sidebar and see if it appears in there.
Sent from my Vibrant using the XDA app.
Typos, incorrect words, gibberish, and other nonsense brought to you courtesy of Swype.
Thanks for the replies. It works flawlessly in my brother's mac but not at all in mine. It shows up in system profiler and usb prober but not in disk utility. I have no clue what to do
Check your log and see if it was a driver issue.
Nothing even shows up in the log when I connect it. It's like it's not even happening. Yet it clearly shows in system profiler and usb prober and my phone prompts me for usb storage
matt_stang said:
Nothing even shows up in the log when I connect it. It's like it's not even happening. Yet it clearly shows in system profiler and usb prober and my phone prompts me for usb storage
Click to expand...
Click to collapse
Perhaps it is a bad usb port or cable?
Sent from my Vibrant using the XDA app.
Typos, incorrect words, gibberish, and other nonsense brought to you courtesy of Swype.
I am having this same issue. When I plugged in my Vibrant I used to get a network adapter found and I would click cancel and all would work. One time I clicked to configure it an since then I cannot mount the file system anymore. I removed the network adapter in Network preferences and I still cannot mount the disks. I also cannot adb into the Vibrant either.
This works on all the other Macs in my house as long as I click Cancel to the network adapter found dialog.
-Phil
I have searched and searched and I still cannot find a solution for this. I have 3 Macs and on two of them I have no problems connecting to the SD cards or using adb. On the 3rd one it was working fine until I pressed to open network connections when I plugged it in. From then on it stopped connecting to the SD cards even with debugging on.
Does anyone have a possible solution to this?
Thanks!
use pc..... they are what the WORLD runs on... or shoot steve jobs an email questioning compatability and troubleshooting
g1ftmfw said:
use pc..... they are what the WORLD runs on... or shoot steve jobs an email questioning compatability and troubleshooting
Click to expand...
Click to collapse
Please tell me you're a troll.
I'm having the same problem exactly as described. Used to connect just fine, but got the new network adapter message every time I connected. Removed the entry in Network Prefs so that message would stop, and now can't connect anymore.
Any ideas? Anyone? This is really frustrating. Now I can't change the music on my phone, nor update to Froyo.
Thanks.
I know that other people are having similar problems with Android phones, but I just got a Wildfire today and it doesn't get detected.
I have Windows 7 x86, HTC Sync 3.0.5422. I am running HTC Sync as administrator with disabled AV and Firewall. I am using the back USB ports. I don't see any other options in HTCSync than Help and About. HTC is appearing in Devices and Printers normally.
It also comes in Device Manager under
- Disk Drives as HTC Android Phone USB Devices
- portable Devices as D:\ (next free letter drive)
Anyone has any ideas?
Thanks
When you first connect your phone to the computer, make sure that you enabled "usb debugging". Once this is done, you should not have any more problems.
To activate usb debugging, just go settings -> applications > usb debugging.
Hope this helps.
Sent from my HTC Wildfire using XDA App
I had the same problem on x64. Couldn't get it to work till I was so frustrated about it and gave up. I think there is a problem with the usb drivers.
Sent from my HTC Wildfire using XDA App
Enabling USB debugging allows me to connect. But as soon as it looks like syncing, the wildfire comes up with "prepairing SD card" and it disconnects
Very frustraiting
fishb00n said:
I had the same problem on x64. Couldn't get it to work till I was so frustrated about it and gave up. I think there is a problem with the usb drivers.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Works fine for me on 7 x64.
I did install the drivers from the SD card earlier though for development.
I had similar problems - which all disappeared when I used a different usb port. The one's at the front of my PC just didn't work. Ones at the back worked fine.
Skye Menjou said:
Works fine for me on 7 x64.
I did install the drivers from the SD card earlier though for development.
Click to expand...
Click to collapse
I know it should work. but I can't find out what exactly is causing this behavior - and that sickens me Cause usually I get everything to work =]
I did uninstall everything that had to do with HTC. Sync App, Drivers, everything. Rebooted and tried from scratch.
I saw that Windows Update automatically downloads drivers for the Wildfire as soon as it detects it on USB. I had no chance to abort that so that I could install the Stock HTC drivers that came on the SD Card.
As soon as Windows said the device should be ready to use, I installed Sync again and tested if sync was working. Didn't work. Then I installed HTC drivers from SD Card. Tried if it works. Nothing. Rebooted. Tried Again. Nothing. USB Debugging on. Nothing. USB Debugging off. Nothing ... I don't know any further
Skye do you have installed the HBOOT driver from unrevoked along with the HTC drivers? Could it be possible that they both interfere somehow? Or is this not possible at all.
I don't use the HBOOT drivers since I don't have my device rooted.I can see that it could have an effect.
I'll check the device name, hardware id and driver version for the ADB tomorrow and we shall compare it with yours.
i had same problem, turned out it is firewall blocking (least for me), disabled security suite and all works fine. i had f-secure internet security
Plug in using rear USBs
Well, plugging in using the rear USBs worked for me. Slightly inconvenient. Maybe they're trying to sell more docks...
Change USB "Charge Only" to USB "HTC Sync"
I have a super simple solution to try that worked for me.
When getting the HTC Sync "no device connected" error message, you must change the phone's USB setting from "charge only" to "HTC Sync", if it's not already done.
I noticed that my "notifications panel" at the top of the screen said "Charge Only" next to a USB symbol.
To make this change on the T-Mobile MyTouch 3g Slide, I opened the notifications panel (with your finger, pull down the bar at the top of the screen). Then, I clicked on USB "Charge only" bullet and changed it to "HTC Sync". Voila, the next time I plugged in my phone, HTC Sync recognized it, the phone app of HTC Sync found the HTC Sync on my computer, and gave me options for syncing.
I didn't need to uninstall or reinstall HTC Sync, move drivers, use msconfig to prevent programs from starting up, etc.
new2android1 said:
I have a super simple solution to try that worked for me.
When getting the HTC Sync "no device connected" error message, you must change the phone's USB setting from "charge only" to "HTC Sync", if it's not already done.
I noticed that my "notifications panel" at the top of the screen said "Charge Only" next to a USB symbol.
To make this change on the T-Mobile MyTouch 3g Slide, I opened the notifications panel (with your finger, pull down the bar at the top of the screen). Then, I clicked on USB "Charge only" bullet and changed it to "HTC Sync". Voila, the next time I plugged in my phone, HTC Sync recognized it, the phone app of HTC Sync found the HTC Sync on my computer, and gave me options for syncing.
I didn't need to uninstall or reinstall HTC Sync, move drivers, use msconfig to prevent programs from starting up, etc.
Click to expand...
Click to collapse
Thanks alot!!! This just saved me so much trouble!!!
Sync screen minimized - shows device connected, but can't open Sync screen
thearif said:
When you first connect your phone to the computer, make sure that you enabled "usb debugging". Once this is done, you should not have any more problems.
To activate usb debugging, just go settings -> applications > usb debugging.
Hope this helps.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
I have the HTC Merge from U.S. Cellular. I had used HTC Sync without too many problems when I was on XP until the last update. That always connected but would not sync, giving me an error every time [1000 general error]. The fix was to re-install the version before, and don't upgrade even when you get a notice that an upgrade is available.
As soon as I moved to Windows 7, and used the same process, Sync on my PC would flash on, then show disconnected, and then minimize. The icon in the system tray showed a connection, and my phone shows a connection. But there is no way that I have found to get the main window open on the PC, and set the options for what I want to sync!
HTC has been no help at all.
Has anyone found a way to view the Sync software screen on the PC after moving to Windows 7... or 8?
Crossing my fingers - hoping there's a solution!
I had a similar problem, but just had to update htc drivers and reboot then it worked perfecto hope youv'e gotten it sorted out mate.
BatEarsJoe said:
I had a similar problem, but just had to update htc drivers and reboot then it worked perfecto hope youv'e gotten it sorted out mate.
Click to expand...
Click to collapse
Joe,
Do you know which versions of the HTC drivers worked for you? I'm hoping that your solution works for me!!:fingers-crossed:
I think I got them off a thread in the sensation forum, when I'm next at a computer I'll have a look for.them, if not I'll UL them for you
kevin1061 said:
Joe,
Do you know which versions of the HTC drivers worked for you? I'm hoping that your solution works for me!!:fingers-crossed:
Click to expand...
Click to collapse
Try these: http://forum.xda-developers.com/showthread.php?p=37437438
and
http://forum.xda-developers.com/showthread.php?t=2126036
If these don't work then ill go through my history and find the exact ones, let me know if they worked
BatEarsJoe said:
Try these: http://forum.xda-developers.com/showthread.php?p=37437438
and
http://forum.xda-developers.com/showthread.php?t=2126036
If these don't work then ill go through my history and find the exact ones, let me know if they worked
Click to expand...
Click to collapse
Joe,
I gave these a try, and I still have the same issue. HTC Sync loads for a second, then flashes "No device connected" and disappears. The icon in the system tray shows a connection, and I can tell the phone to sync, but after checking my calendar for a test appointment that I changed, nothing changed on the phone. Since HTC Sync won't open, I can't adjust the settings to make sure it is set up correctly.
Very frustrating! Wish they would update their software!
Looks like a bug to me, Suddenly I do not see the "USB connected" message on the notification bar! I have to disconnect USB and change mode from mass storage to something else and then change it back then connect USB and it shows the USB connected message with mount option.
Never had this problem with any previous builds. Also, I see the accurate battery mod shows "plug" sign while USB is connected but no "USB connected" message or mount option!
Any comments people...anyone with this problem on JI5 leak?
Simple question first. Did you leave de-bugging enabled? I updated my device thru Kies (one of the lucky ones it seems) instead of flashing Eugene's or the Odin mount and I haven't had that problem. I think I saw someone in the orginal JI5 on Kies thead mentioned this too. I tried to replicate their bug but my seems to 100% good. What's your OS?
its a bug, with mine is seems to come and go
ShinyBuddha said:
Simple question first. Did you leave de-bugging enabled? I updated my device thru Kies (one of the lucky ones it seems) instead of flashing Eugene's or the Odin mount and I haven't had that problem. I think I saw someone in the orginal JI5 on Kies thead mentioned this too. I tried to replicate their bug but my seems to 100% good. What's your OS?
Click to expand...
Click to collapse
Thanks for the reply. I flashed it through ODIN on Windows 7. Also, USB debugging was never enabled in the process. It seems like a bug because it comes and goes, randomly. Maybe this was one reason Tmobile told us not to upgrade...
demo23019 said:
its a bug, with mine is seems to come and go
Click to expand...
Click to collapse
Good to hear I am not alone with this problem...thanks for the reply...
hopefully we'll find a workaround...
Just wanted to note here, flashed to stock, formatted internal sd card, upgraded to leaked JI6 and the bug still exists, hopefully OTA JI6 fixes this
Tried OTA, erased everything, flashed from scratch still the same issue...hopefully someone has a solution, if not then this adds another reason for Froyo update
That's wierd. I upgraded to OTA and problem went away for me.
Sent from my SGH-T959 using XDA App
It's not really a bug. There is an option under Settings > Applications > USB Settings. Mine wasn't showing up either so I swithed it to "Ask on connection" then plugged the USB back in and that worked. Then I switched it back to "Mass storage" and now it immediately gets ready to mount. I guess you just have to set it that first time.
Its a bug with leaked JI6. This thread started with leaked JI6... Think he recently changed headline. And you solution was temporary fix with leaked version problem would come back. Can't comment about OTA since the problem went away with mine
Sent from my SGH-T959 using XDA App
Ok, Well I can let you know that it doesn't come back with OTA. You should flash JI6 The other builds are buggy.
wow, for those who went all the way to reformatting internal sd because of this im sorry.
all you have to do is go to settings> app settings> usb settings> and change to ask on connection
thats it, i would not really call it a bug
oh yea, and thats with JI6
kboater said:
wow, for those who went all the way to reformatting internal sd because of this im sorry.
all you have to do is go to settings> app settings> usb settings> and change to ask on connection
thats it, i would not really call it a bug
oh yea, and thats with JI6
Click to expand...
Click to collapse
THIS solves it. Just did that and everything is back to normal. With that out of the way, this JI6 software is close to perfect (the RFS file system thing is the imperfect part). This is the software this phone should've launched with. Now if they can just go to a proper file system in their 2.2 update, Sammy will have a beast of a phone.
Thanks for the replies guys. I have set the default USB to "mass storage" instead of "ask on connection" as I don't want to make a selection each time.
Now, when I connect the phone I see USB connected and sometimes there is a USB connected message in status bar with no mount option and sometimes there is no USB connected message at all... now sure what's going on. I've been seeing this problem since JI5.
I've also read some threads about this in QnA forum..thanks...
VICosPhi said:
Thanks for the replies guys. I have set the default USB to "mass storage" instead of "ask on connection" as I don't want to make a selection each time.
Now, when I connect the phone I see USB connected and sometimes there is a USB connected message in status bar with no mount option and sometimes there is no USB connected message at all... now sure what's going on. I've been seeing this problem since JI5.
I've also read some threads about this in QnA forum..thanks...
Click to expand...
Click to collapse
Just for the heck of it, if you haven't tried already. Check off debug mode. Because when you plug in usb debug mode pops up and maybe usb will also every time
Thanks for the reply... Yes I now I leave the USB debugging to always enabled. This is the only way the USB mass storage option is always presented on USB connect.
Hopefully Froyo fixes this as I've seen some other people having the issue as well...
I have never seen this issue on JI6. It always pops up "USB Connected: Select to copy files to/fom your computer" in the status when I plug in the USB cable. It's never failed, even when I had USB Debugging off.
VICosPhi said:
Thanks for the reply... Yes I now I leave the USB debugging to always enabled. This is the only way the USB mass storage option is always presented on USB connect.
Hopefully Froyo fixes this as I've seen some other people having the issue as well...
Click to expand...
Click to collapse
Just FYI, I was having this problem when I flashed the JI6 update via ODIN. Mounting would only work when I had usb debug mode on. However, I disabled USB debug mode and then went to
Settings -> Application Settings -> USB Settings
I then changed it from mass storage to ask on connection and then back to mass storage and it gives me the option to mount in status bar just fine when I connect it to the computer via usb.
HTH.
I noticed that after the update i don't get updates ffrom the market place anymore?
Anyone experience the same thing?
Are you using the auto update? I'm not sure it tells you if this is on.
When I connected to my mac (debbuging has to be left on) I get a menu to either connect to kies,mass storage and one other.
Hi everybody. I got this new myTouch 4G by T-Mobile, and when I connect it to my PC, nothing happens. I went into "Settings" and then into "Connect to PC" and chose every setting one by one, but nothing. My comp doesn't recognize it. There has to be a pretty easy fix for this, what is it?
P.S. It has a light on it, just as it's charging, and it is charging, but my PC doesn't see it connected.
Thanx for the help!!
ilyabyk83 said:
Hi everybody. I got this new myTouch 4G by T-Mobile, and when I connect it to my PC, nothing happens. I went into "Settings" and then into "Connect to PC" and chose every setting one by one, but nothing. My comp doesn't recognize it. There has to be a pretty easy fix for this, what is it?
P.S. It has a light on it, just as it's charging, and it is charging, but my PC doesn't see it connected.
Thanx for the help!!
Click to expand...
Click to collapse
Download the "USB Tethering Driver" here: http://www.htc.com/us/support/t-mobile-mytouch-4g/downloads/
While it says it's for USB tethering, it's basically just a generic driver to get Windows to recognize your phone. There's also a copy on your SD card.
unremarked said:
Download the "USB Tethering Driver" here: http://www.htc.com/us/support/t-mobile-mytouch-4g/downloads/
While it says it's for USB tethering, it's basically just a generic driver to get Windows to recognize your phone. There's also a copy on your SD card.
Click to expand...
Click to collapse
Thank You. Lets see if this helps
unremarked said:
Download the "USB Tethering Driver" here: http://www.htc.com/us/support/t-mobile-mytouch-4g/downloads/
While it says it's for USB tethering, it's basically just a generic driver to get Windows to recognize your phone. There's also a copy on your SD card.
Click to expand...
Click to collapse
It DIDN'T
ilyabyk83 said:
It DIDN'T
Click to expand...
Click to collapse
Hm, what version of Windows do you have running? Is Autorun(on Windows) turned off? What happens when you pull down the tab on your phone, and hit "Mount SD card for storage" or something similiar?
EDIT: Scratch the Mount SD thing. I forget that mySense doesn't have that option like that.
unremarked said:
Hm, what version of Windows do you have running? Is Autorun(on Windows) turned off? What happens when you pull down the tab on your phone, and hit "Mount SD card for storage" or something similiar?
EDIT: Scratch the Mount SD thing. I forget that mySense doesn't have that option like that.
Click to expand...
Click to collapse
This is Windows Vista, Autorun needs to pop up so I would be able to turn it off, and it never did. And there is nothing to pull down on the device. I know what you are talking about, but I don't see anything appear; only that light comes on orange. My pc doesn't even see it in my Device Manager. But the light does light up on the device just as if I connect it to a charger.
ilyabyk83 said:
This is Windows Vista, Autorun needs to pop up so I would be able to turn it off, and it never did. And there is nothing to pull down on the device. I know what you are talking about, but I don't see anything appear; only that light comes on orange. My pc doesn't even see it in my Device Manager. But the light does light up on the device just as if I connect it to a charger.
Click to expand...
Click to collapse
Wow, if you don't even see it in Device Manager that's beyond strange. o_o On my first phone, I connected it to my computer and it instantly recognized it. On the second device, I had to go to the link I provided to you and then guide Device Manager there for it to work.
I think someone more technical savvy will have to help you, mate. Sorry.
unremarked said:
Wow, if you don't even see it in Device Manager that's beyond strange. o_o On my first phone, I connected it to my computer and it instantly recognized it. On the second device, I had to go to the link I provided to you and then guide Device Manager there for it to work.
I think someone more technical savvy will have to help you, mate. Sorry.
Click to expand...
Click to collapse
Thank You though!!
unremarked said:
Wow, if you don't even see it in Device Manager that's beyond strange. o_o On my first phone, I connected it to my computer and it instantly recognized it. On the second device, I had to go to the link I provided to you and then guide Device Manager there for it to work.
I think someone more technical savvy will have to help you, mate. Sorry.
Click to expand...
Click to collapse
My PC is supposed to make a sound when there is something being connected to it, but nothing. I went thru all 3 settings in "Connect to PC"; I restarted my device after each, but nothing. My Device Manger doesn't refresh when I connect/disconnect the device. What could this be? Anybody has any ideas?? Thanx for your help!!
Out of continuing pondering on your issue, what happens if you connect your phone to a different USB port? Still nothing? Does anything at all show up as "?" or unknown on Device Manager. It might be listed as a "mass storage device" and you'll need to direct it manually to the driver location.
Racking my brain for ya!
unremarked said:
Out of continuing pondering on your issue, what happens if you connect your phone to a different USB port? Still nothing? Does anything at all show up as "?" or unknown on Device Manager. It might be listed as a "mass storage device" and you'll need to direct it manually to the driver location.
Racking my brain for ya!
Click to expand...
Click to collapse
Tried all eight ports I have, all nothing. I usually have a "Ding" sound when I connect any USB devices. Nothing here
ilyabyk83 said:
Tried all eight ports I have, all nothing. I usually have a "Ding" sound when I connect any USB devices. Nothing here
Click to expand...
Click to collapse
What connection mode does your phone default to? Check under Settings -> PC Connection (IIRC, phone not in hand ATM) and make sure it's not disabled. I think there is USB Storage Device, Charge Only, or Disabled. It will set the default of how the phone acts when plugged in to a PC.
You will need to test it on another pc or with another cable if possible. That would be the best way to find out what is causing the problem.
Sent from my HTC Glacier using XDA App
Weird... when I connect my phone it automatically mounts.... running on vista as well.
Jeffmeister said:
Weird... when I connect my phone it automatically mounts.... running on vista as well.
Click to expand...
Click to collapse
I should hear a ding sound when I connect it. And yes, I did try other ports, computers, cables, I just don't know what is up here. There are other issues here, but I want to resolve this first.
Sent from my HTC Glacier using XDA App
stoneyjonez said:
You will need to test it on another pc or with another cable if possible. That would be the best way to find out what is causing the problem.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I had tried that. On my HTC I went in to the connection settings, and I tried every single one there. "Charge Only", "Disk Drive", "USB Tethering". The best I get, is when I select "Disk Drive" I have my MicroSD card to show up as "Removable Disk" in my Windows Explorer. HMMMMMMMMMMM.........
ilyabyk83 said:
I had tried that. On my HTC I went in to the connection settings, and I tried every single one there. "Charge Only", "Disk Drive", "USB Tethering". The best I get, is when I select "Disk Drive" I have my MicroSD card to show up as "Removable Disk" in my Windows Explorer. HMMMMMMMMMMM.........
Click to expand...
Click to collapse
That's what should happen...So what's the problem then?
Genocaust said:
That's what should happen...So what's the problem then?
Click to expand...
Click to collapse
Hi. I need to place a file on to a ROOT of my device, install and run it, NOT on a storage card. How do I get the phone's memory itself show up on my Windows Explorer not my storage card?? I want to perform unlocking steps that are given on this forum. Thank You