Hi guys,
i rooted my Note run Abyss Kernel and using asylum build 19 and gapps.....
i have put them on my sd and run the asylum zip then run the gapps,
rebooted but i only get to the asylum logo screen doesn't load up left it for up to 2 hours,
i have also cleared the cache
HELP!!!!!! :crying:
Answer
Dirtbag1974 said:
Hi guys,
i rooted my Note run Abyss Kernel and using asylum build 19 and gapps.....
i have put them on my sd and run the asylum zip then run the gapps,
rebooted but i only get to the asylum logo screen doesn't load up left it for up to 2 hours,
i have also cleared the cache
HELP!!!!!! :crying:
Click to expand...
Click to collapse
Ok look !
1) Reboot Recovery (POWER BUTTON - MENU MAIN - VOLUME CTRL +
2) Install from SD find Abyss and install it (don't restart after this) go to
3) Advanced
4) Reboot Recovery
If you want to install custom rom follow that steps:
5) Wipe Factory reset (if you do that you will loose are your files if you don't want take backup before to do, but you have to know you have if you install Custom ROM to do that)
6) Wipe Cache
7) Wipe Dalvin
8) Install from SD run Jbroid
9) Wipe all again
10) Install from SD, find your ZIP custom ROM for example i have chrack 10
11) After installation Reboot system
You are ready
Have you run from before CWM and SU-Busybox ? Because you have to and then you will flash Abyss
Uf above doesnt help,
Flash kernel that goes well with asylum the abys part might also be blocking bootup
Sent from my GT-N7000 using Tapatalk 2
Related
ok i rooted the other day and i was just about to try and install custom rom but when i holded home/vol up/power i boot into a menu with...
reboot system now
apply sdcard update zip
wipe data/factory reset
wipe cache partition
...BUT no install from sd option.. to install the Abyss Kernel 4.2 i need, im new to this so please dont bash me for idiocy, ive spent hours looking for info and no luck as of yet. whats the best way to get my phone unrooted without that binary thing or any tech guys knowing i did it as i wanna start again and hopfuly install custom rom, this info will help me for when i need to send phone off for repair also ?
thankyou
i rooted using this way.
http://forum.xda-developers.com/showthread.php?t=1329360
Download the [CWM zip] and put in your Ext SDCARD ] And [ SUPERSU-Busybox-Installer.zip] to SD card (internal memory)
Reboot to recovery.
Choose apply update from external storage. (use vol up/down to select, power to enter)
Choose CWM.zip and wait until CWM recovery appear.
Choose install zip from sdcard (Now use touch function to select choice)
Choose and Install SUPERSU-Busybox-Installer.zip
Reboot
You are done and now your device is Rooted
Click to expand...
Click to collapse
anyone
It appears you dont have CWM installed, Get CWM and put it on sd card, Then boot into recovery and select ''apply sdcard update zip''
Or you can just flash a SAFE kernel in ODIN, Something like speedmod
CWM - http://forum.xda-developers.com/attachment.php?attachmentid=1056408&d=1336826886
Speedmod Kernel (ODIN) - https://dl.dropbox.com/u/69014495/speedmod-kernel-n7000-ics-k3-3-Odin.tar
PLEASE AVOID DOING A FULL WIPE UNLESS YOU KNOW YOU ARE ON A SAFE KERNEL - SPEEDMOD IS SAFE, SO IS ABYSS !!!
azzledazzle said:
It appears you dont have CWM installed, Get CWM and put it on sd card, Then boot into recovery and select ''apply sdcard update zip''
Or you can just flash a SAFE kernel in ODIN, Something like speedmod
CWM - http://forum.xda-developers.com/attachment.php?attachmentid=1056408&d=1336826886
Speedmod Kernel (ODIN) - https://dl.dropbox.com/u/69014495/speedmod-kernel-n7000-ics-k3-3-Odin.tar
PLEASE AVOID DOING A FULL WIPE UNLESS YOU KNOW YOU ARE ON A SAFE KERNEL - SPEEDMOD IS SAFE, SO IS ABYSS !!!
Click to expand...
Click to collapse
thankyou thankyou thankyou, first usfull help for the past few days, ill give this a shot
ok its making progress, ive doen so far
- download Abyss Kernel 4.2 from here: http://www.mediafire.com/?c65mndvpk6ocbaa
- put zip-file on your USB-storage
- boot in Recovery
- Flash Abyss Kernel 4.2!!!
- boot back in Recovery (find it under 'advanced') ok i selected restart recovery the top option and now it just has a numbers going up and up ie its not at 1419 and its increasing as i type.. what is this ? ok i took out battery and this time i flashed abyss and rebooted phone not via the option in advanced menu and now rebooted back to cwm and about to flash rom to see if it worked... i dint do any wiping
- now FullWipe!!!
- Flash ROM
- reboot system
-...you are done
Its difficult to understand what you are trying to say.
You have CWM installed now yes ?
And you successfully flashed Abyss kernel in CWM ?
If so, When you reboot into recovery, You should see RedPill Touch Recovery (same as CWM but red) ?? If you DO NOT see this, DO NOT WIPE.
If you do see it, Then Job done, Flash away, Its safe to wipe on that kernel, But Im new and would avoid it whether it is safe or not.
Only wipe if you HAVE TO !
hi all im all sorted now, i just wasent understanding it all but a very kind person helped me though it and im now clued up and understand all what was needed
thankyou all
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
LilSasa said:
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
Click to expand...
Click to collapse
okay i will try it, anyway what are other compilation of CMW?
AldRezaine said:
okay i will try it, anyway what are other compilation of CMW?
Click to expand...
Click to collapse
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
anasdcool71 said:
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Still not working. I already flashed back to stock rom but failed.
vangeodee said:
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
Click to expand...
Click to collapse
It works but when I install Link2Sd app my phone reboot itself and stuck in the boot screen.
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
I will give it try and see if it works..
I don't think your supposed to use Link2SD?
Ohhhh leave it try to flash ussrv6 it's awesome man very smooth fast and stable than hperion...
Sent from my GT-S5360 using xda premium
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
wipe dalvik cache
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Ameya0909 said:
wipe dalvik cache
Click to expand...
Click to collapse
Already did sir a million times but still problem persist..
vangeodee said:
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Click to expand...
Click to collapse
Thanks sir for sharing your knowledge but I think already know about it...
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
yehs14 said:
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
Click to expand...
Click to collapse
What kernel Im going to flash...? HYPERION has built-in kernel already..
okay so i have rooted my p700, installed CWM, and flashed cm10... after that i rebooted my phone (i needed to in order to get link2sd to recognize my external sd), after that the CM went into a bootloop!! which got me very angry (considering it came at a very bad time)... so i reflashed it a number of times even tried older builds...still all i get is a hot processor and a bootloop....i have gone through so many forums, scavenged the whole internet for methods on fixing it but still no luck...anybody have anyway of fixing this? and one more thing after i formated my sd (trying to make partitions for link2sd i lost my backup )
try download latest CM10 and reflash it . Make sure follow the steps correctly
How to Install::
Download the ROM
Put it on your phone root
Reboot In Recovery(MAKE A BACKUP BEFORE DOING ANYTHING!)
Wipe Data/Cache,Wipe Cache,Wipe Dalvik Cache(Which you can find in Advanced)
Select Install ZIP from SDCard
Select the ROM and let it install,then also Install GAPPS.
Need More
slingswish said:
try download latest CM10 and reflash it . Make sure follow the steps correctly
How to Install::
Download the ROM
Put it on your phone root
Reboot In Recovery(MAKE A BACKUP BEFORE DOING ANYTHING!)
Wipe Data/Cache,Wipe Cache,Wipe Dalvik Cache(Which you can find in Advanced)
Select Install ZIP from SDCard
Select the ROM and let it install,then also Install GAPPS.
Click to expand...
Click to collapse
I did that and i got a blck screen with both the menu and back button lighten up,rebooted 2 and now i got the CM animation screen, not sure but i think its in a bootloop again been there for 3mins
Wierd
I just noticed that if i pull my sd-card out during the booting process the bootloop ends! wierd huh, anyway around it?
Hey all, i tried to update my cm10 to cm11, i add the file (cm11) to the phone then i went to recovery mode and installed, i had an error when, i tried to reboot my s3, then the galaxy screen was looping like 3 times and goes to recovery screen again, i cant add other version of cm or files in the phone. actualy i cant do anything... what i am trying to do now is put the cm10 but i have no idea how... i am using mac.. but having a pc computer at home.... please someone can help ?
thanks in advence.
Download stock rom and flash it with odin.
Use google.
Sent from my GT-I9300 using xda app-developers app
or you can just download another rom (I actually use SlimRom 4.3. It's really nice BTW)
download the rom, put it on external sd card. Go to recovery and
1) wipe data/factory reset
2) wipe cache
3) go to mount then format system
4) go to Advanced then format dalvik cache
5) go to install then external sd card and browse to your rom
6) Enjoy
I had issues with updating from CM10.2 to CM11 however I never got to the stage it got stuck in a bootloop although this could be due to new permissions that CM11 require. Ensure you have the latest ClockworkMod installed as that should install it correctly. I also suggest doing a wipe after installation as well as using PA Gapps if you want to used any system google apps.
Hey i have trouble shooting issues in installing a rom for my device it says "signature not valid"
M new to this kind of stuffs so can somebody suggest me how can i have kiktkat on my device
Thanks in advance
My device is gt n 7000 and i have uploaded a snapshot of my device too
Franky.sac said:
Hey i have trouble shooting issues in installing a rom for my device it says "signature not valid"
M new to this kind of stuffs so can somebody suggest me how can i have kiktkat on my device
Thanks in advance
My device is gt n 7000 and i have uploaded a snapshot of my device too
Click to expand...
Click to collapse
You need to find a stock-compatible custom recovery. Search through your device-specific forums and read all the FAQs.
Franky.sac said:
Hey i have trouble shooting issues in installing a rom for my device it says "signature not valid"
M new to this kind of stuffs so can somebody suggest me how can i have kiktkat on my device
Thanks in advance
My device is gt n 7000 and i have uploaded a snapshot of my device too
Click to expand...
Click to collapse
1. Download Philz Kernel for 4.1.2 (any recent version) and copy it to your external sd card (don't extract the file, leave it in .zip format)
2. Download Raw Kernel r3p2 test kernel and copy it to to your phone (external or internal memory) (don't extract the file, leave it in .zip format)
3. Download OmniROM, Gapps and SuperSU
4. Boot into recovery (hold down volume up + home button + power button when the phone is off, let go when you're in recovery)
5. Flash Philz kernel and reboot
6. Boot into recovery again and this time flash Raw Kernel, then reboot
7. Reboot into recovery again
8. Wipe /system, /data and cache
9. Flash OmniROM, gapps, SuperSU
10. Reboot
XxPixX said:
1. Download Philz Kernel for 4.1.2 (any recent version) and copy it to your external sd card (don't extract the file, leave it in .zip format)
2. Download Raw Kernel r3p2 test kernel and copy it to to your phone (external or internal memory) (don't extract the file, leave it in .zip format)
3. Download OmniROM, Gapps and SuperSU
4. Boot into recovery (hold down volume up + home button + power button when the phone is off, let go when you're in recovery)
5. Flash Philz kernel and reboot
6. Boot into recovery again and this time flash Raw Kernel, then reboot
7. Reboot into recovery again
8. Wipe /system, /data and cache
9. Flash OmniROM, gapps, SuperSU
10. Reboot
Click to expand...
Click to collapse
Thanks XxPixX, I installed
philz_touch_6.48.4-n7000
raw_kernel_r6_j43
pa_gapps-stock-4.4.4-20140708-signed_2
omni-4.4.4-20140709-n7000-NIGHTLY
however my device has unrooted. how can i get my root back ?
Elvisnazareth said:
Thanks XxPixX, I installed
philz_touch_6.48.4-n7000
raw_kernel_r6_j43
pa_gapps-stock-4.4.4-20140708-signed_2
omni-4.4.4-20140709-n7000-NIGHTLY
however my device has unrooted. how can i get my root back ?
Click to expand...
Click to collapse
I made a guide for KitKat on our device here: http://forum.xda-developers.com/showthread.php?t=2780703
You'll find the answer in the bugs/issues part